Enhancing the activity and succinyl-CoA specificity of 3-ketoacyl-CoA thiolase Tfu_0875 through rational binding pocket engineering

The 3-ketoacyl-CoA thiolase is the rate-limiting enzyme for linear dicarboxylic acids production. However, the promiscuous substrate specificity and suboptimal catalytic performance have restricted its application. Here we present both biochemical and structural analyses of a high-efficiency 3-ketoacyl-CoA thiolase Tfu_0875. Notably, Tfu_0875 displayed heightened activity and substrate specificity for succinyl-CoA, a key precursor in adipic acid production. To enhance its performance, a deep learning approach (DLKcat) was employed to identify effective mutants, and a computational strategy, known as the greedy accumulated strategy for protein engineering (GRAPE), was used to accumulate these effective mutants. Among the mutants, Tfu_0875N249W/L163H/E217L exhibited the highest specific activity (320% of wild-type Tfu_0875), the greatest catalytic efficiency (kcat/KM = 1.00 min-1mM-1), the highest succinyl-CoA specificity (KM = 0.59 mM, 28.1% of Tfu_0875) and dramatically reduced substrate binding energy (-30.25 kcal mol-1v.s. -15.94 kcal mol-1). A structural comparison between Tfu_0875N249W/L163H/E217L and the wild type Tfu_0875 revealed that the increased interaction between the enzyme and succinyl-CoA was the primary reason for the enhanced enzyme activity. This interaction facilitated rapid substrate anchoring and stabilization. Furthermore, a reduced binding pocket volume improved substrate specificity by enhancing the complementarity between the binding pocket and the substrate in stereo conformation. Finally, our rationally designed mutant, Tfu_0875N249W/L163H/E217L, increased the adipic acid titer by 1.35-fold compared to the wild type Tfu_0875 in shake flask. The demonstrated enzymatic methods provide a promising enzyme variant for the adipic acid production. The above effective substrate binding pocket engineering strategy can be beneficial for the production of other industrially competitive biobased chemicals when be applied to other thiolases.

Medium-chain dicarboxylic acids: chemistry, pharmacological properties, and applications in modern pharmaceutical and cosmetics industries

Succinic (SUA), glutaric (GLA), pimelic (PA), suberic (SUBA), adipic (ADA), azelaic (AZA), and sebacic acids (SA) make up the majority of medium-chain dicarboxylic acids (MCDAs) with chain lengths of C4-C10, and are widely utilised in the chemical, food, textile, pesticide, pharmaceutical, and liquid crystal sectors. The MCDAs' two carboxyl groups provide them with an incredibly broad variety of applications. The focus of significant scientific research now is on the increasingly varied pharmacological effects of MCDAs. However, only a few studies have compared the biological characteristics of MCDAs in the contemporary pharmaceutical and cosmetic sectors and thoroughly examined the most recent research and marketing initiatives for MCDAs. This review's objective is to offer a thorough analysis of academic works on MCDAs, to assess the usefulness of these substances' chemical-pharmacological properties for use in the contemporary pharmaceutical and cosmetic industries, and to investigate the direction of their possible applications in these two disciplines. In addition, this review investigates how these compounds are metabolised in the human body.

An Eclectic Review on Dicarboxylic Acid Production Through Yeast Cell Factories and Its Industrial Prominence

Dicarboxylic acid (DCA) is a multifaceted chemical intermediate, recoursed to produce many industrially important products such as adhesives, plasticizers, lubricants, polymers, etc. To bypass the shortcomings of the chemical methods of synthesis of DCA and to reduce fossil fuel footprints, bio-based synthesis is gaining attention. In pursuit of an eco-friendly sustainable alternative method of DCA production, microbial cell factories, and renewable organic resources are gaining popularity. Among the plethora of microbial communities, yeast is being favored industrially compared to bacterial fermentation due to its hyperosmotic and low pH tolerance and flexibility for gene manipulations. By application of rapidly evolving genetic manipulation techniques, the bio-based DCA production could be made more precise and economical. To bridge the gap between supply and demand of DCA, many strategies are employed to improve the fermentation. This review briefly outlines the advancements in DCA production using yeast cell factories with the exemplification of strain improvement strategies.

Mid-Long Chain Dicarboxylic Acid Production via Systems Metabolic Engineering: Progress and Prospects

Mid-to-long-chain dicarboxylic acids (DCAi, i ≥ 6) are organic compounds in which two carboxylic acid functional groups are present at the terminal position of the carbon chain. These acids find important applications as structural components and intermediates across various industrial sectors, including organic compound synthesis, food production, pharmaceutical development, and agricultural manufacturing. However, conventional petroleum-based DCA production methods cause environmental pollution, making sustainable development challenging. Hence, the demand for eco-friendly processes and renewable raw materials for DCA production is rising. Owing to advances in systems metabolic engineering, new tools from systems biology, synthetic biology, and evolutionary engineering can now be used for the sustainable production of energy-dense biofuels. Here, we explore systems metabolic engineering strategies for DCA synthesis in various chassis via the conversion of different raw materials into mid-to-long-chain DCAs. Subsequently, we discuss the future challenges in this field and propose synthetic biology approaches for the efficient production and successful commercialization of these acids.

Synthesis of 4-sulfonyl-1,7-diesters via K2CO3-mediated alkylative debenzoylation of α-sulfonyl o-hydroxyacetophenones with acrylates

The synthesis of 4-sulfonyl-1,7-diesters was well developed, under open-vessel conditions, by K2CO3-mediated double alkylation of α-sulfonyl o-hydroxyacetophenones with acrylates and tandem debenzoylation of the resulting α,α-disubstituted o-hydroxyacetophenones. A plausible mechanism is proposed and discussed here. This high-yielding protocol provides a highly effective intermolecular alkylation and intramolecular debenzoylation via the formation of two carbon-carbon (C-C) single bonds and the cleavage of a carbon-carbon (C-C) single bond.

Metabolic engineering of Corynebacterium glutamicum for the high-level production of valerolactam, a nylon-5 monomer

Valerolactam (VL) is an important precursor chemical for nylon-5 and nylon 6,5. It has been produced by petroleum-based route involving harsh reaction conditions and generating toxic wastes. Here, we report the complete biosynthesis of VL by metabolically engineered Corynebacterium glutamicum overproducing L-lysine. The pathway comprising L-lysine monooxygenase (davB) and 5-aminovaleramide amidohydrolase (davA) from Pseudomonas putida, and β-alanine CoA transferase (act) from Clostridium propionicum was introduced into the C. glutamicum GA16 strain. To increase the VL flux, competitive pathways predicted from sRNA knockdown target screening were deleted. This engineered C. glutamicum strain produced VL as a major product, but still secreted significant amount of its precursor, 5-aminovaleric acid (5AVA). To circumvent this problem, putative 5AVA transporter genes were screened and engineered in the genome, thereby reuptaking 5AVA excreted. Also, multiple copies of the act gene were integrated into the genome to strengthen the conversion of 5AVA to VL. The final VL10 (pVL1) strain was constructed by enhancing glucose uptake system, which produced 9.68 g/L of VL in flask culture. Fed-batch fermentation of the VL10 (pVL1) strain produced 76.1 g/L of VL from glucose with the yield and productivity of 0.28 g/g and 0.99 g/L/h, respectively, showcasing a high potential for bio-based production of VL from renewable resources.

Metabolic Engineering for Effective Synthesis of 2-Hydroxyadipate

Adipic acid is an important monomer in the synthesis of nylon-6,6. In recent years, the biosynthesis of adipic acid has received more and more attention. The pathway with l-lysine as a precursor has potential for adipic acid synthesis, and 2-hydroxyadipate is a key intermediate metabolite in this pathway. In this Letter, the biosynthesis pathway of 2-hydroxyadipate was constructed in Escherichia coli. Through enhancement of precursor synthesis and cofactors regulation, 7.11 g/L of 2-hydroxyadipate was produced in the 5 L bioreactor, which verified the scale-up potential of 2-hydroxyadipate production. Furthermore, 11.1 g/L of 2-hydroxyadipate was produced in the 5 L bioreactor on the basis of potential optimization strategies via transcriptome analysis. This is the first time for the biosynthesis of 2-hydroxyadipate. The results lay a solid foundation for the biosynthesis of adipic acid and the production of bionylon.

Biosensor-based high-throughput screening enabled efficient adipic acid production

Adipic acid is an industrially important chemical, but the current approach to synthesize it can be of serious pollution to the environment. Rencently, bio-based production of adipic acid has significantly advanced with the development of metabolic engineering and synthetic biology. However, genetic heterogeneity-caused decrease of product titer has largely limited the industrialization of chemicals like adipic acid. Therefore, in the attempt to overcome this challenge, we constitutively expressed the reverse adipate degradation pathway, designed and optimized an adipic acid biosensor, and established a high-throughput screening platform to screen for high-performance strains based on the optimized biosensor. Using this platform, we successfully screened a strain with an adipic acid titer of 188.08 mg·L^-1. Coupling the screening platform with fermentation optimization, the titer of adipic acid reached 531.88 mg·L^-1 under shake flask fermentation, which achieved an 18.78-fold improvement comparing to the initial strain. Scale-up fermentation in a 5-L fermenter utilizing the screened high-performance strain was eventually conducted, in which the adipic acid titer reached 3.62 g·L^-1. Overall, strategies developed in this study proved to be a potentially efficient method in reducing the genetic heterogeneity and was expected to provide guidance in helping to build a more efficient industrial screening process. KEY POINTS: • Developed a fine-tuned adipic acid biosensor. • Established a high-throughput screening platform to screen high-performance strains. • The titer of adipic acid reached 3.62 g·L^-1 in a 5-L fermenter.

Polymers without Petrochemicals: Sustainable Routes to Conventional Monomers

Access to a wide range of plastic materials has been rationalized by the increased demand from growing populations and the development of high-throughput production systems. Plastic materials at low costs with reliable properties have been utilized in many everyday products. Multibillion-dollar companies are established around these plastic materials, and each polymer takes years to optimize, secure intellectual property, comply with the regulatory bodies such as the Registration, Evaluation, Authorisation and Restriction of Chemicals and the Environmental Protection Agency and develop consumer confidence. Therefore, developing a fully sustainable new plastic material with even a slightly different chemical structure is a costly and long process. Hence, the production of the common plastic materials with exactly the same chemical structures that does not require any new registration processes better reflects the reality of how to address the critical future of sustainable plastics. In this review, we have highlighted the very recent examples on the synthesis of common monomers using chemicals from sustainable feedstocks that can be used as a like-for-like substitute to prepare conventional petrochemical-free thermoplastics.

Prospects for carbon-negative biomanufacturing

Biomanufacturing has the potential to reduce demand for petrochemicals and mitigate climate change. Recent studies have also suggested that some of these products can be net carbon negative, effectively removing CO₂ from the atmosphere and locking it up in products. This review explores the magnitude of carbon removal achievable through biomanufacturing and discusses the likely fate of carbon in a range of target molecules. Solvents, cleaning agents, or food and pharmaceutical additives will likely re-release their carbon as CO₂ at the end of their functional lives, while carbon incorporated into non-compostable polymers can result in long-term sequestration. Future research can maximize its impact by focusing on reducing emissions, achieving performance advantages, and enabling a more circular carbon economy.

Trends in valorization of highly-toxic lignocellulosic biomass derived-compounds via engineered microbes

Lignocellulosic biomass-derived fuels, chemicals, and materials are promising sustainable solutions to replace the current petroleum-based production. The direct microbial conversion of thermos-chemically pretreated lignocellulosic biomass is hampered by the presence of highly toxic chemical compounds. Also, thermo-catalytic upgrading of lignocellulosic biomass generates wastewater that contains heterogeneous toxic chemicals, a mixture of unutilized carbon. Metabolic engineering efforts have primarily focused on the conversion of carbohydrates in lignocellulose biomass; substantial opportunities exist to harness value from toxic lignocellulose-derived toxic compounds. This article presents the comprehensive metabolic routes and tolerance mechanisms to develop robust synthetic microbial cell factories to valorize the highly toxic compounds to advanced-platform chemicals. The obtained platform chemicals can be used to manufacture high-value biopolymers and biomaterials via a hybrid biochemical approach for replacing petroleum-based incumbents. The proposed strategy enables a sustainable bio-based materials economy by microbial biofunneling of lignocellulosic biomass-derived toxic molecules, an untapped biogenic carbon.

Synthesis of Bio-based monomers and polymers using microbes for a sustainable bioeconomy

As a result of environmental concerns and the depletion of biomass assets, eco-friendly, renewable biomass-based chemical extraction has recently received significant attention. Bio-based chemicals can be prepared using different renewable feedstockbio-resources through microbial fermentation. Chemicals produced from renewable feedstockscan reduce ecological consequences from improper disposal and repurpose them into valuable products. Biodegradability, biocompatibility and non-toxicity, particularly in biomedical applications, have inspired researchers towards developing novel technologies that have social benefit. Among semi-synthetic and synthetic polymeric materials, utilization of natural bio-based monomeric materials can provide opportunities for sustainable development of novel non-toxic, biodegradable and biocompatible products. The purpose of this work is to give a summary of research into the generation of natural bio-based succinic acid (SA) monomer, the development of poly(butylene succinate) (PBS) as biodegradable polymer, PBS-based nanocomposites and their innovative uses.

Reprogramming Escherichia coli Metabolism for Bioplastics Synthesis from Waste Cooking Oil

The recycle and reutilization of food wastes is a promising alternative for supporting and facilitating circular economy. However, engineering industrially relevant model organisms to use food wastes as their sole carbon source has remained an outstanding challenge so far. Here, we reprogrammed Escherichia coli metabolism using modular pathway engineering followed by laboratory adaptive evolution to establish a strain that can efficiently utilize waste cooking oil (WCO) as the sole carbon source to produce monomers of bioplastics, namely, medium-chain α,ω-dicarboxylic acids (MCDCAs). First, the biosynthetic pathway of MCDCAs was designed and rewired by modifying the β-oxidation pathway and introducing an ω-oxidation pathway. Then, metabolic engineering and laboratory adaptive evolution were applied for improving the pathway efficiency of fatty acids utilization. Finally, the engineered strain E. coli AA0306 was able to produce 15.26 g/L MCDCAs with WCO as the sole carbon source. This study provides an economically attractive strategy for biomanufacturing bioplastics from food wastes, which has a great potentiality to be developed as a wide range of enabling biotechnologies for achieving green revolution.

Opportunities and Challenges for Microbial Synthesis of Fatty Acid-Derived Chemicals (FACs)

Global warming and uneven distribution of fossil fuels worldwide concerns have spurred the development of alternative, renewable, sustainable, and environmentally friendly resources. From an engineering perspective, biosynthesis of fatty acid-derived chemicals (FACs) is an attractive and promising solution to produce chemicals from abundant renewable feedstocks and carbon dioxide in microbial chassis. However, several factors limit the viability of this process. This review first summarizes the types of FACs and their widely applications. Next, we take a deep look into the microbial platform to produce FACs, give an outlook for the platform development. Then we discuss the bottlenecks in metabolic pathways and supply possible solutions correspondingly. Finally, we highlight the most recent advances in the fast-growing model-based strain design for FACs biosynthesis.

Glutaric acid production by systems metabolic engineering of an l-lysine-overproducing Corynebacterium glutamicum

There is increasing industrial demand for five-carbon platform chemicals, particularly glutaric acid, a widely used building block chemical for the synthesis of polyesters and polyamides. Here we report the development of an efficient glutaric acid microbial producer by systems metabolic engineering of an l-lysine-overproducing Corynebacterium glutamicum BE strain. Based on our previous study, an optimal synthetic metabolic pathway comprising Pseudomonas putida l-lysine monooxygenase (davB) and 5-aminovaleramide amidohydrolase (davA) genes and C. glutamicum 4-aminobutyrate aminotransferase (gabT) and succinate-semialdehyde dehydrogenase (gabD) genes, was introduced into the C. glutamicum BE strain. Through system-wide analyses including genome-scale metabolic simulation, comparative transcriptome analysis, and flux response analysis, 11 target genes to be manipulated were identified and expressed at desired levels to increase the supply of direct precursor l-lysine and reduce precursor loss. A glutaric acid exporter encoded by ynfM was discovered and overexpressed to further enhance glutaric acid production. Fermentation conditions, including oxygen transfer rate, batch-phase glucose level, and nutrient feeding strategy, were optimized for the efficient production of glutaric acid. Fed-batch culture of the final engineered strain produced 105.3 g/L of glutaric acid in 69 h without any byproduct. The strategies of metabolic engineering and fermentation optimization described here will be useful for developing engineered microorganisms for the high-level bio-based production of other chemicals of interest to industry.

The 3-ketoacyl-CoA thiolase: an engineered enzyme for carbon chain elongation of chemical compounds

Because of their function of catalyzing the rearrangement of the carbon chains, thiolases have attracted increasing attentions over the past decades. The 3-ketoacyl-CoA thiolase (KAT) is a member of the thiolase, which is capable of catalyzing the Claisen condensation reaction between the two acyl-CoAs, thereby achieving carbon chain elongation. In this way, diverse value-added compounds might be synthesized starting from simple small CoA thioesters. However, most KATs are hampered by low stability and poor substrate specificity, which has hindered the development of large-scale biosynthesis. In this review, the common characteristics in the three-dimensional structure of KATs from different sources are summarized. Moreover, structure-guided rational engineering is discussed as a strategy for enhancing the performance of KATs. Finally, we reviewed the metabolic engineering applications of KATs for producing various energy-storage molecules, such as n-butanol, fatty acids, dicarboxylic acids, and polyhydroxyalkanoates. KEY POINTS: • Summarize the structural characteristics and catalyzation mechanisms of KATs. • Review on the rational engineering to enhance the performance of KATs. • Discuss the applications of KATs for producing energy-storage molecules.

Ring opening polymerization of macrocyclic oligoesters derived from renewable sources

A review about the synthesis of renewable alkylene furanoate and dicarboxylate MCOs, their ROP to polyesters and their recycling by cyclodepolymerization.