Significantly improved electrocatalytic oxygen reduction by an asymmetrical Pacman dinuclear cobalt(ii) porphyrin-porphyrin dyad

Precisely Constructing Orbital-Coupled Fe─Co Dual-atom Sites for High-Energy-Efficiency Zn-Air/Iodide Hybrid Batteries

Rechargeable Zn-air batteries (ZABs) are promising for energy storage and conversion. However, the high charging voltage and low energy efficiency hinder their commercialization. Herein, these challenges are addressed by employing precisely constructed multifunctional Fe-Co diatomic site catalysts (FeCo-DACs) and integrating iodide/iodate redox into ZABs to create Zinc-air/iodide hybrid batteries (ZAIHBs) with highly efficient multifunctional catalyst. The strong coupling between the 3d orbitals of Fe and Co weakens the excessively strong binding strength between active sites and intermediates, enhancing the catalytic activities for oxygen reduction/evolution reaction and iodide/iodate redox. Consequently, FeCo-DACs exhibit outstanding bifunctional oxygen catalytic activity with a small potential gap (ΔE = 0.66 V) and outstanding stability. Moreover, an outstanding catalytic performance toward iodide/iodate redox is obtained. Therefore, FeCo-DAC-based ZAIHBs exhibit high energy efficiency of up to 75% at 10 mA cm-2 and excellent cycling stability (72% after 500 h). This research offers critical insights into the rational design of DACs and paves the way for high-energy efficiency energy storage devices.

Covalent Tethering of Cobalt Porphyrins on Phenolic Resins for Electrocatalytic Oxygen Reduction and Evolution Reactions

Using functionalized supporting materials for the immobilization of molecular catalysts is an appealing strategy to improve the efficiency of molecular electrocatalysis. Herein, we report the covalent tethering of cobalt porphyrins on phenolic resins (PR) for improved electrocatalytic oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). A cobalt porphyrin bearing an alkyl bromide substituent was covalently tethered on phenolic resins, through the substitution reaction of alkyl bromides with phenolic hydroxyl groups, to afford molecule-engineered phenolic resins (Co-PR). The resulted Co-PR was efficient for electrocatalytic ORR and OER by displaying an ORR half-wave potential of E1/2=0.78 V versus RHE and an OER overpotential of 420 mV to get 10 mA/cm2 current density. We propose that the many residual phenolic hydroxyl groups on PR will surround the tethered Co porphyrin and play critical roles in facilitating proton and electron transfers. Importantly, Co-PR outperformed unmodified PR and PR loaded with Co porphyrins through simple physical adsorption (termed Co@PR). The zinc-air battery assembled using Co-PR displayed a performance comparable to that using Pt/C+Ir/C. This work is significant to present phenolic resins as a functionalized material to support molecular electrocatalysts and demonstrate the strategy to improve molecular electrocatalysis with the use of phenolic resin residues.

Metal vs Ligand Oxidation: Coexistence of Both Metal-Centered and Ligand-Centered Oxidized Species

A series of two-electron-oxidized cobalt porphyrin dimers have been synthesized upon controlled oxidations using halogens. Rather unexpectedly, X-ray structures of two of these complexes contain two structurally different low-spin molecules in the same asymmetric unit of their unit cells: one is the metal-centered oxidized diamagnetic entity of the type CoIII(por), while the other one is the ligand-centered oxidized paramagnetic entity of the type CoII(por•+). Spectroscopic, magnetic, and DFT investigations confirmed the coexistence of the two very different electronic structures both in the solid and solution phases and also revealed a ferromagnetic spin coupling between Co(II) and porphyrin π-cation radicals and a weak antiferromagnetic coupling between the π-cation radicals of two macrocycles via the bridge in the paramagnetic complex.

Electrocatalytic Oxygen Reduction Reaction of Peripheral Functionalized Cobalt Porphyrins(2.1.2.1)

Two peripheral functionalized clamp-shaped cobalt porphyrin(2.1.2.1) complexes were synthesized, and their electrocatalytic ORR abilities were investigated. The crystal data and optical and redox properties of them were revised by peripheral modification. The ORR capacities and DFT calculations of F5PhCo and F5NCo suggest superior selectivity for the 4e- ORR pathway. This work further confirms the clamp-shaped cobalt porphyrin complexes are ideal Co-N4 ORR catalysts.

Steering competitive N2 and CO adsorption toward efficient urea production with a confined dual site

Electrocatalytic urea synthesis under mild conditions via the nitrogen (N2) and carbon monoxide (CO) coupling represents an ideal and green alternative to the energy-intensive traditional synthetic protocol. However, this process is challenging due to the more favorable CO adsorption than N2 at the catalytic site, making the formation of the key urea precursor (*NCON) extremely difficult. Herein, we theoretically construct a spatially isolated dual-site (DS) catalyst with the confinement effect to manipulate the competitive CO and N2 adsorption, which successfully guarantees the dominant horizontal N2 adsorption and subsequent efficient *NCON formation via C-N coupling and achieves efficient urea synthesis. Among all the computationally evaluated candidates, the catalyst with dual V sites anchored on 4N-doped graphene (DS-VN4) stands out and shows a moderate energy barrier for C-N coupling and a low theoretical limiting potential of -0.50 V for urea production, which simultaneously suppresses the ammonia production and hydrogen evolution. The confined dual-site introduced in this computational work has the potential to not only properly address part of the challenges toward efficient urea electrosynthesis from CO and N2 but also provide an elegant theoretical strategy for fine-tuning the strength of chemical bonds to achieve a rational catalyst design.

Effects of tuning the structural symmetry of cobalt porphyrin on electrocatalytic oxygen reduction reactions

Metalloporphyrins have attracted significant attention as highly promising alternatives to Pt-based electrocatalysts in the realm of oxygen reduction reactions (ORRs). While the structure of porphyrin is widely recognized as a pivotal factor influencing the ORR performance, the impact of molecular symmetry, which is one of the key properties of the molecular structure, has rarely been understood and its effects remain largely unexplored. Herein, we designed and synthesized two triphenylamine (TPA)-substituted cobalt porphyrins, the asymmetric aBz-TCoP and the symmetric Bz-2TCoP, which are doped onto carbon black to construct composite catalysts for ORRs. The electronic structures of both porphyrins are determined through density functional theory (DFT) calculations, and the morphology and electronic states of the composites are examined by spectroscopic techniques. A series of electrochemical measurements demonstrate the superior activity, selectivity and durability of Bz-2TCoP/C to aBz-TCoP/C in ORRs conducted in both acidic and alkaline electrolytes. The improved ORR properties of the symmetric porphyrin may stem from the steric properties rather than the electronic properties of the chemical structure. This work represents a preliminary study on the effects of porphyrin structural symmetry on electrocatalysis and provides a potential strategy for further structural modifications of metalloporphyrins, as non-noble metal electrocatalysts, to enhance the ORR performance.

Diheme cytochromes: Effect of mixed-axial ligation on the electronic structure and electrochemical properties with cobalt porphyrin dimer

A series of six-coordinate diCo(III) porphyrin dimers, as synthetic analogues of diheme cytochromes, have been reported here having bis(imidazole), bis(pyridine) and mixed thiophenolate-pyridine/imidazole axial ligands. In the X-ray structures of bis(imidazole) and bis(pyridine) complexes, the axial ligands are in perpendicular orientation while they are parallelly oriented in their monomeric analog. The porphyrin rings are also highly ruffle-distorted in dimer but planar in monomer which reflect the effect of intramolecular interaction between two Co(porphyrin) units in dimers. In the X-ray structure of diCo(III) thiophenolate-pyridine mixed-ligated complex, the axial Co-S and Co-N(py) distances are 2.256(1) and 2.063(2) Å, respectively. The Co-N(py) distance of 2.063(2) Å is much longer than the distances of 1.961(3) and 1.972(3) Å observed in bis(pyridine) complex and the Co-S distance is larger than Co-N(py) in the mixed ligated complex which results in a displacement of Co by 0.15 Å towards the pyridine ligand from the mean porphyrin plane. Indeed, this is the first X-ray structure of a metalloporphyrin with mixed thiophenolate-pyridine axial ligands. The effect of mixed-axial ligation is demonstrated by a blue-shift of the Soret band in the UV-visible spectroscopy and also a positive shift of the Co(III)/Co(II) redox couple as compared to their bis(pyridine) analogue. The redox potentials are shifted to a large negative value just upon replacing the metal from iron to cobalt. The present investigation emphasizes the role of axial ligation, metal ions, and also the effect of heme-heme interaction in controlling the spectral and electrochemical properties.

Electrocatalytic oxygen reduction with cobalt corroles bearing cationic substituents

Recent decades have seen increasing interest in developing highly active and selective electrocatalysts for the oxygen reduction reaction (ORR). The active site environment of cytochrome c oxidases (CcOs), including electrostatic and hydrogen-bonding interactions, plays an important role in promoting the selective conversion of dioxygen to water. Herein, we report the synthesis of three Co^III corroles, namely 1 (with a 10-phenyl ortho-trimethylammonium cationic group), 2 (with a 10-phenyl ortho-dimethylamine group) and 3 (with a 10-phenyl para-trimethylammonium cationic group) as well as their electrocatalytic ORR activities in both acidic and neutral solutions. We discovered that 1 is much more active and selective than 2 and 3 for the electrocatalytic four-electron ORR. Importantly, 1 showed ORR activities with half-wave potentials at E_1/2 = 0.75 V versus RHE in 0.5 M H₂SO₄ solutions and at E_1/2 = 0.70 V versus RHE in neutral 0.1 M phosphate buffer solutions. This work is significant for outlining a strategy to increase both the activity and selectivity of metal corroles for the electrocatalytic ORR by introducing cationic units.

Photo/Electrocatalytic Hydrogen Peroxide Production by Manganese and Iron Porphyrin/Molybdenum Disulfide Nanoensembles

The oxygen reduction reaction (ORR) 2e^- pathway provides an alternative and green route for industrial hydrogen peroxide (H₂ O₂ ) production. Herein, the ORR photo/electrocatalytic activity in the alkaline electrolyte of manganese and iron porphyrin (MnP and FeP, respectively) electrostatically associated with modified 1T/2H MoS₂ nanosheets is reported. The best performing catalyst, MnP/MoS₂ , exhibits excellent electrocatalytic performance towards selective H₂ O₂ formation, with a low overpotential of 20 mV for the 2e^- ORR pathway (E_ons  = 680 mV vs RHE) and an H₂ O₂ yield up to 99%. Upon visible light irradiation, MnP/MoS₂ catalyst shows significant activity enhancement along with good stability. Electrochemical impedance spectroscopy assays suggest a reduced charge transfer resistance value at the interface with the electrolyte, indicating an efficient intra-ensemble transfer process of the photo-excited electrons through the formation of a type II heterojunction or Schottky contact, and therefore justifies the boosted electrochemical activities in the presence of light. Overall, this work is expected to inspire the design of novel advanced photo/electrocatalysts, paving the way for sustainable industrial H₂ O₂ production.

Crucial Roles of a Pendant Imidazole Ligand of a Cobalt Porphyrin Complex in the Stoichiometric and Catalytic Reduction of Dioxygen

A cobalt porphyrin complex with a pendant imidazole base ([(L₁ )Co^II ]) is an efficient catalyst for the homogeneous catalytic two-electron reduction of dioxygen by 1,1'-dimethylferrocene (Me₂ Fc) in the presence of triflic acid (HOTf), as compared with a cobalt porphyrin complex without a pendant imidazole base ([(L₂ )Co^II ]). The pendant imidazole ligand plays a crucial role not only to provide an imidazolinium proton for proton-coupled electron transfer (PCET) from [(L₁ )Co^II ] to O₂ in the presence of HOTf but also to facilitate electron transfer (ET) from [(L₁ )Co^II ] to O₂ in the absence of HOTf. The kinetics analysis and the detection of intermediates in the stoichiometric and catalytic reduction of O₂ have provided clues to clarify the crucial roles of the pendant imidazole ligand of [(L₁ )Co^II ] for the first time.

Promotion of Catalytic Oxygen Reduction Reactions: The Utility of Proton Management Substituents on Cobalt Porphyrins

Three ABAB-type cobalt meso-tetraarylporphyrins with fluorine (F-CoPor), acetic acid (AC-CoPor), and cyanoacetic acid (CN-CoPor) groups at the para-positions of phenyl rings at the 10,20-positions are synthesized and evaluated as catalysts for oxygen reduction reactions (ORRs). In density functional theory calculations, the frontier molecular orbitals of these complexes were found to be stabilized relative to model complexes with electron-withdrawing atoms or moieties on the meso-aryl rings. Electrochemical measurements suggest that electrodes with CN-CoPor (CN-CoPor/C) exhibit the most positive ORR potential values and the highest limiting current density in both acidic and alkali electrolytes, while the F-CoPor/C electrocatalyst exhibits extremely low ORR performance. The electron transfer numbers for the electrocatalysts are more than 3.0, indicating that a mixture of 2- and 4-electron transfer pathways occurs. The results demonstrate that coupling the hydrogen bonding properties and electron-withdrawing abilities through rational design of the substituent at the meso-position is an efficient way to modify the ORR performance.

Second Sphere Effects on Oxygen Reduction and Peroxide Activation by Mononuclear Iron Porphyrins and Related Systems

Activation and reduction of O₂ and H₂O₂ by synthetic and biosynthetic iron porphyrin models have proved to be a versatile platform for evaluating second-sphere effects deemed important in naturally occurring heme active sites. Advances in synthetic techniques have made it possible to install different functional groups around the porphyrin ligand, recreating artificial analogues of the proximal and distal sites encountered in the heme proteins. Using judicious choices of these substituents, several of the elegant second-sphere effects that are proposed to be important in the reactivity of key heme proteins have been evaluated under controlled environments, adding fundamental insight into the roles played by these weak interactions in nature. This review presents a detailed description of these efforts and how these have not only demystified these second-sphere effects but also how the knowledge obtained resulted in functional mimics of these heme enzymes.

Metalloporphyrins as Catalytic Models for Studying Hydrogen and Oxygen Evolution and Oxygen Reduction Reactions

The hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and oxygen reduction reaction (ORR) are involved in biological and artificial energy conversions. H-H and O-O bond formation/cleavage are essential steps in these reactions. In nature, intermediates involved in the H-H and O-O bond formation/cleavage are highly reactive and short-lived, making their identification and investigation difficult. In artificial catalysis, the realization of these reactions at considerable rates and close to their thermodynamic reaction equilibria remains a challenge. Therefore, the elucidation of the reaction mechanisms and structure-function relationships is of fundamental significance to understand these reactions and to develop catalysts.This Account describes our recent investigations on catalytic HER, OER, and ORR with metalloporphyrins and derivatives. Metalloporphyrins are used in nature for light harvesting, energy conversion, electron transfer, O₂ activation, and peroxide degradation. Synthetic metal porphyrin complexes are shown to be active for these reactions. We focused on exploring metalloporphyrins to study reaction mechanisms and structure-function relationships because they have stable and tunable structures and characteristic spectroscopic properties.For HER, we identified three H-H bond formation mechanisms and established the correlation between these processes and metal hydride electronic structures. Importantly, we provided direct experimental evidence for the bimetallic homolytic H-H bond formation mechanism by using sterically bulky porphyrins. Homolytic HER has been long proposed but rarely verified because the coupling of active hydride intermediates occurs spontaneously and quickly, making their detection challenging. By blocking the bimolecular mechanism through steric effects, we stabilized and characterized the Ni^III-H intermediate and verified homolytic HER by comparing the reaction behaviors of Ni porphyrins with and without steric effects. We therefore provided an unprecedented example to control homolytic versus heterolytic HER mechanisms through tuning steric effects of molecular catalysts.For the OER, the water nucleophilic attack (WNA) on high-valent terminal Mn-oxo has been proposed for the O-O bond formation in natural and artificial water oxidation. By using Mn tris(pentafluorophenyl)corrole, we identified Mn^V(O) and Mn^IV-peroxo intermediates in chemical and electrochemical OER and provided direct experimental evidence for the Mn-based WNA mechanism. Moreover, we demonstrated several catalyst design strategies to enhance the WNA rate, including the pioneering use of protective axial ligands. By studying Cu porphyrins, we proposed a bimolecular coupling mechanism between two metal-hydroxide radicals to form O-O bonds. Note that late-transition metals do not likely form terminal metal-oxo/oxyl.For the ORR, we presented several strategies to improve activity and selectivity, including providing rapid electron transfer, using electron-donating axial ligands, introducing hydrogen-bonding interactions, constructing dinuclear cooperation, and employing porphyrin-support domino catalysis. Importantly, we used Co porphyrin atropisomers to realize both two-electron and four-electron ORR, representing an unparalleled example to control ORR selectivity by tuning only steric effects without modifying molecular and/or electronic structures.Lastly, we developed several strategies to graft metalloporphyrins on various electrode materials through different covalent bonds. The molecular-engineered materials exhibit boosted electrocatalytic performance, highlighting promising applications of molecular electrocatalysis. Taken together, this Account demonstrates the benefits of exploring metalloporphyrins for the HER, OER, and ORR. The knowledge learned herein is valuable for the development of porphyrin-based catalysts and also other molecular and material catalysts for small molecule activation reactions.

Engineering Active Sites of Gold-Cuprous Oxide Catalysts for Electrocatalytic Oxygen Reduction Reaction

Understanding how the catalyst morphology influences surface sites is crucial for designing active and stable catalysts and electrocatalysts. We here report a new approach to this understanding by decorating gold (Au) nanoparticles on the surface of cuprous oxides (Cu₂O) with three different shape morphologies (spheres, cubes, and petals). The Au-Cu₂O particles are dispersed onto carbon nanotube (CNT) matrix with high surface area, stability, and conductivity for oxygen reduction reaction. A clear morphology-dependent enhancement of the electrocatalytic activity is revealed. Oxygenated gold species (AuO^-) are found to coexist with Au⁰ on the cube and petal catalysts, whereas only Au⁰ species are present on the sphere catalyst. The AuO^- species function effectively as active sites, resulting in the improved catalytic performance by changing the reaction mechanism. The enhanced catalytic performance of the petal-shaped catalyst in terms of onset potential, half-wave potential, diffusion-limited current density, and stability is closely associated with the presence of the most abundant AuO^- species on its surface. Highly active AuO^- species are identified on the surface of the catalysts as a result of the unique structural characteristics, which is attributed to the structural origin of high activity and stability. This insight constitutes the basis for assessing the detailed correlation between the morphology and the electrocatalytic properties of the nanocomposite catalysts, which has implications for the design of surface-active sites on metal/metal oxide electrocatalysts.

Topological defect-containing Fe/N co-doped mesoporous carbon nanosheets as novel electrocatalysts for the oxygen reduction reaction and Zn-air batteries

Developing effective electrocatalysts for the oxygen reduction reaction is of great significance for clean and renewable energy technologies, such as metal-air batteries and fuel cells. Defect engineering is the central focus of this field because the overall catalytic performance crucially depends on highly active defects. For the ORR, topological defects have been proven to have a positive effect. However, because preparation and characterization of such defects are difficult, a basic understanding of the relationship between topological defects and catalytic performance remains elusive. In this study, topological defect-containing Fe/N co-doped mesoporous carbon nanosheets were synthesized using azulene-based sandwich-like polymer nanosheets as the precursor. As electrocatalysts, such porous carbon nanosheets exhibited promising ORR activity, methanol tolerance ability, and stability with a half-wave potential of 841 mV under alkaline conditions, which is superior to those of most of the reported porous carbons. As the air cathode for Zn-air batteries, the catalyst exhibited a peak power density of 153 mW cm^-2 and a specific capacity of 628 mA h g^-1,which were higher than those of a Pt/C-based Zn-air battery. Density functional theory calculation further proved the positive effect of topological defects on the oxygen reduction activity. These results indicate that bottom-up topological defect engineering could be a new and promising strategy for developing high-performance electrocatalysts.

Significantly boosted oxygen electrocatalysis with cooperation between cobalt and iron porphyrins

Developing electrocatalysts for the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) is of great importance. Herein, Co tetrakis(pentafluorophenyl)porphyrin (Co-P) and Fe chloride tetrakis(pentafluorophenyl)porphyrin (Fe-P) were loaded on carbon nanotubes (CNTs) for combining the electrocatalytic advantages of both Co-P and Fe-P. The resultant (Co-P)0.5(Fe-P)0.5@CNT composite displayed significantly boosted activity for the selective four-electron ORR with a half-wave potential of 0.80 V versus reversible hydrogen electrode (RHE) and for the OER with a potential of 1.65 V versus RHE to obtain 10 mA cm-2 current density in 0.1 M KOH. A Zn-air battery assembled from (Co-P)0.5(Fe-P)0.5@CNT exhibited a small charge-discharge voltage gap of 0.74 V at 2 mA cm-2, a high power density of 174.5 mW cm-2 and a good rechargeable stability (>120 cycles).

Substituents and the induced partial charge effects on cobalt porphyrins catalytic oxygen reduction reactions in acidic medium

Charge states at the catalytic interface can intensely alter the charge transfer mechanism and thus the oxygen reduction performance. Two symmetric cobalt porphyrins with electron deficient 2,1,3-benzothiadiazole (BTD) and electron-donating propeller-like triphenylamine (TPA) derivatives have been designed firstly, to rationally generate intramolecular partial charges, and secondly, to utilize the more exposed molecular orbitals on TPA for enhancing the charge transfer kinetics. The catalytic performance of the two electrocatalysts was examined for oxygen reduction reactions (ORR) in acidic electrolyte. It was found that BCP1/C with two BTD groups showed greater reduction potential but less limiting current density as compared to BCP2/C bearing BTD-TPA units. The reduced potential of BCP2/C was proposed to the introduction of the electron-donating ability of TPA, which may decrease the adsorption affinity of oxygen to the cobalt center. Both dipole-induced partial charge effect and the more exposed cation orbitals of the 3D structural TPA were proposed to contribute to the increased response current of BCP2/C. In addition, BCP2/C attained more than 80% of H₂O₂ generation in acidic solution, which may also relate to the structural effect. These findings may provide new insight into the structural design of organic electrocatalysts and deep understanding on the interfacial charge transfer mechanism for ORR.

Controlling Oxygen Reduction Selectivity through Steric Effects: Electrocatalytic Two-Electron and Four-Electron Oxygen Reduction with Cobalt Porphyrin Atropisomers

Achieving a selective 2 e^- or 4 e^- oxygen reduction reaction (ORR) is critical but challenging. Herein, we report controlling ORR selectivity of Co porphyrins by tuning only steric effects. We designed Co porphyrin 1 with meso-phenyls each bearing a bulky ortho-amido group. Due to the resulted steric hinderance, 1 has four atropisomers with similar electronic structures but dissimilar steric effects. Isomers αβαβ and αααα catalyze ORR with n=2.10 and 3.75 (n is the electron number transferred per O₂ ), respectively, but ααββ and αααβ show poor selectivity with n=2.89-3.10. Isomer αβαβ catalyzes 2 e^- ORR by preventing a bimolecular O₂ activation path, while αααα improves 4 e^- ORR selectivity by improving O₂ binding at its pocket, a feature confirmed by spectroscopy methods, including O K-edge near-edge X-ray absorption fine structure. This work represents an unparalleled example to improve 2 e^- and 4 e^- ORR by tuning only steric effects without changing molecular and electronic structures.

Synthesis, characterization and electrocatalytic properties of bimetallic sulfides CoS/MnS/N-C for oxygen reduction in alkaline media

Synthesis, characterization and oxygen reduction reaction (ORR) catalytic properties of bimetallic sulfides CoS/MnS/N-C catalyst was discussed. The catalyst was derived from a typical Co based zeolitic imidazolate framework (ZIF-67) and manganese aminoporphyrin. 5,15-Bis(4-aminophenyl)-10,20-bis(4-bromophenyl) porphyrin manganese oxoacetate loaded with ZIF-67 forms a porphyrin loaded ZIF-67. This product was then calcined at 800ˆ∘C and vulcanized with thioacetamide to obtain the bimetallic sulfide product CoS/MnS/N-C. The structure of CoS/MnS/N-C was further characterized by XRD, XPS, FESEM and HRTEM spectra which indicated a novel porous and hollow sphere structure. The electrocatalytic properties of the bimetallic material as well as its parent porphyrin and ZIF-67 were also compared in alkaline condition (0.1 M KOH) with a rotating disk electrode. The prepared catalyst CoS/MnS/N-C exhibits a higher catalytic performance than its precursors (PorMnOAc, ZIF-67 and PorMnOAc loaded ZIF-67) with almost four electron transfers under this condition.

Metal-Organic-Framework-Supported Molecular Electrocatalysis for the Oxygen Reduction Reaction

Synthesizing molecule@support hybrids is appealing to improve molecular electrocatalysis. We report herein metal-organic framework (MOF)-supported Co porphyrins for the oxygen reduction reaction (ORR) with improved activity and selectivity. Co porphyrins can be grafted on MOF surfaces through ligand exchange. A variety of porphyrin@MOF hybrids were made using this method. Grafted Co porphyrins showed boosted ORR activity with large (>70 mV) anodic shift of the half-wave potential compared to ungrafted porphyrins. By using active MOFs for peroxide reduction, the number of electrons transferred per O₂ increased from 2.65 to 3.70, showing significantly improved selectivity for the 4e ORR. It is demonstrated that H₂ O₂ generated from O₂ reduction at Co porphyrins is further reduced at MOF surfaces, leading to improved 4e ORR. As a practical demonstration, these hybrids were used as air electrode catalysts in Zn-air batteries, which exhibited equal performance to that with Pt-based materials.

Towards self-doping multimetal porphyrin systems

An approach for the possible production of novel bimetallic self-doped porphyrin-based compounds of potential interest in material science is reported. Heating Cu(II)tetraphenylporphyrin (TPPCu) with chromocene at 120°C in benzonitrile affords the crystalline multimetal porphyrin system TPPCu/TPPCr in good yield. The X-ray single crystal structural analysis reveals a random distribution of TPPCu and TPPCr, with a Cu:Cr ratio of 71(2):29(2)%. Exploratory DFT calculations of TPPCu/TPPCr indicate little if any electron transfer. In contrast, calculations of a hypothetical cationic TPPCu/TPPRu system indicates the possibility of self-doping.

Recent Developments in Metalloporphyrin Electrocatalysts for Reduction of Small Molecules: Strategies for Managing Electron and Proton Transfer Reactions

Porphyrins are archetypal ligands in inorganic chemistry. The last 10 years have seen important new advances in the use of metalloporphyrins as catalysts in the activation and reduction of small molecules, in particular O₂ and CO₂ . Recent developments of new molecular designs, scaling relationships, and theoretical modeling of mechanisms have rapidly advanced the utility of porphyrins as electrocatalysts. This Minireview focuses on the summary and evaluation of recent developments of metalloporphyrin O₂ and CO₂ reduction electrocatalysts, with an emphasis on contrasting homogeneous and heterogeneous electrocatalysis. Comparisons for proposed reaction mechanisms are provided for both CO₂ and O₂ reduction, and ideas are proposed about how lessons from the last decade of research can lead to the development of practical, applied porphyrin-derived catalysts.

Porphyrin-based frameworks for oxygen electrocatalysis and catalytic reduction of carbon dioxide

The recent progress made on porphyrin-based frameworks and their applications in energy-related conversion technologies (e.g., ORR, OER and CO₂RR) and storage technologies (e.g., Zn–air batteries).

First principles studies of mononuclear and dinuclear Pacman complexes for electrocatalytic reduction of CO2

An iron-containing Pacman complex exhibited high activity and selectivity for the reduction of CO₂ to CH₄.

Effect of porphyrin metal center on synthesis, structure, morphology and oxygen reduction properties of porphyrin encapsulated metal organic frameworks

A series of different metal centered 5,15-Bis(4-aminophenyl)-10,20-bis(4-bromophenyl)porphyrins (PorM) where M = H2, MnOAc, FeCl, Co or Zn were synthesized, and then encapsulated in zeolite imidazole framework-8 (ZIF-8) by typical template directed strategy to generate PorM@ZIF-8 metal organic frameworks (MOFs). These composites were characterized by UV-vis, FTIR, XRD, FESEM and HRTEM methods. Each prepared PorM@ZIF-8 MOF retained the molecular structure of porphyrin and crystal structure of ZIF-8. It is clearly shown that porphyrin centered metal ions will affect MOFs morphology. Both PorH2@ZIF-8 and PorZn@ZIF-8 gave a rhombic dodecahedron, PorMnOAc@ZIF-8 gave a truncated hexagonal prism-like structure, while no specific structures were obtained for PorFeCl@ZIF-8 and PorCo@ZIF-8 due to aggregation as characterized by FESEM spectrum. Oxygen reduction catalytic ability of ZIF-8, PorM and PorM@ZIF-8 were measured in alkaline condition (0.1 M KOH) with the number of electrons transferred being [Formula: see text] = 2.20–2.60 and generating HO[Formula: see text] as the oxygen reduction product. The catalytic property slightly increased after the porphyrin was encapsulated, due possibly to the capacity limit, inappropriate molecular distance or the direction of encapsulated porphyrin molecular.

Catalytic Four-Electron Reduction of Dioxygen by Ferrocene Derivatives with a Nonheme Iron(III) TAML Complex

A mononuclear nonheme iron(III) complex with a tetraamido macrocyclic ligand (TAML), [(TAML)Fe^III]^- (1), is a selective precatalyst for four-electron reduction of dioxygen by ferrocene derivatives in the presence of acetic acid (CH₃COOH) in acetone. This is the first work to show that a nonheme iron(III) complex catalyzes the four-electron reduction of O₂ by one-electron reductants. An iron(V)-oxo complex, [(TAML)Fe^V(O)]^- (2), was produced by oxygenation of 1 with O₂ via the formation of triacetone triperoxide (TATP), acting as an autocatalyst that shortened the induction time for the generation of 2. Decamethylferrocene (Me₁₀Fc) and octamethylferrocene (Me₈Fc) reduced 2 to 1 by two electrons in the presence of CH₃COOH to produce decamethylferrocenium cation (Me₁₀Fc⁺) and octamethylferrocenium cation (Me₈Fc⁺), respectively. Then, 1 was oxygenated by O₂ to regenerate 2 via the formation of TATP. In the cases of ferrocene (Fc), bromoferrocene (BrFc) and 1,1'-dibromoferrocene (Br₂Fc), initial electron transfer from ferrocene derivatives to 2 occurred; however, neither a second proton-coupled electron transfer from ferrocene derivatives to 2 nor a catalytic four-electron reduction of O₂ occurred.

First-row transition metal porphyrins for electrocatalytic hydrogen evolution — a SPP/JPP Young Investigator Award paper

A series of first-row transition metal complexes of tetrakis(pentafluorophenyl)porphyrin (1), denoted as 1-M (M [Formula: see text] Mn, Fe, Co, Ni, Cu, and Zn), were synthesized and examined as electrocatalysts for the hydrogen evolution reaction (HER). All these transition metal porphyrins were shown to be active for HER in acetonitrile using trifluoroacetic acid (TFA) as the proton source. The molecular nature and the stability of these metal porphyrins when functioning as HER catalysts were confirmed, and all catalysts gave Faradaic efficiency of >97% for H2 generation during bulk electrolysis. Importantly, by using 1-Cu, a remarkably high turnover frequency (TOF) of 48500 s[Formula: see text] 1-Cu the most efficient among this series of metal porphyrin catalysts. This TOF value also represents one of the highest values reported in the literature. In addition, electrochemical analysis demonstrated that catalytic HER mechanisms with these 1-M complexes are different. These results show that with the same porphyrin ligand, the change of metal ions will have significant impact on both catalytic efficiency and mechanism. This work for the first time provides direct comparison of electrocatalytic HER features of transition metal complexes of tetrakis(pentafluorophenyl)porphyrin under identical conditions, and will be valuable for future design and development of more efficient HER electrocatalysts of this series.