Automated linkage of proteins and payloads producing monodisperse conjugates

Synthesis of sydnonimines from sydnones and their use for bioorthogonal release of isocyanates in cells

In this article, we report the synthesis of sydnonimines from sydnones and their use as dipoles for fast click-and-release reactions. The process relies on nucleophilic aromatic substitution of aliphatic and aromatic amines with triflated sydnones. This new methodology allowed the preparation of functionalised sydnonimine probes that are otherwise difficult to prepare. These probes were then used to release a drug and a fluorescent aromatic isocyanate inside living cells.

Reinvestigation of the Automated Synthesis of Stoichiometrically Conjugated Antibodies to Access High Molecular Weight Payloads and Multiplexed Conjugation via an In-Solution Trans-Tagging Process

Protein conjugates have found applications in a wide variety of fields, ranging from therapeutics to imaging and detection. However, robust control over the parameters of the conjugation process (such as sites and degree of conjugation) remains challenging. Previously, our group introduced Equimolar NAtive Chemical Tagging (ENACT), a method which allows for the monofunctionalization of proteins by combining an iterative low-conversion bioconjugation, an automated process, and a bioorthogonal trans-tagging reaction. However, while the automated ENACT was dimensioned to achieve monoconjugation at the mg scale, in early stage research, because of the rarity and cost of the starting materials, it is often necessary to prepare conjugates at the lower, μg, scale. Here, we introduce modified ENACT protocols, as well as a new ENACT conjugation reagent, which allow for the monofunctionalization of proteins on the micrograms scale, using minimal quantities of payload.

Disulfide re-bridging reagents for single-payload antibody-drug conjugates

Numerous antibody-drug conjugate (ADC) linker technologies exist for the synthesis of ADCs with drug-to-antibody ratios (DARs) being an even integer (typically 2, 4 or 8). However, ADCs with odd-integer DARs are significantly harder to synthesise. Here, we report the synthesis of ADCs loaded with a single warhead, using TetraDVP linkers which simultaneously re-bridge all four interchain disulfides of an IgG1 antibody.

Enabling the formation of native mAb, Fab' and Fc-conjugates using a bis-disulfide bridging reagent to achieve tunable payload-to-antibody ratios (PARs)

Either as full IgGs or as fragments (Fabs, Fc, etc.), antibodies have received tremendous attention in the development of new therapeutics such as antibody-drug conjugates (ADCs). The production of ADCs involves the grafting of active payloads onto an antibody, which is generally enabled by the site-selective modification of native or engineered antibodies via chemical or enzymatic methods. Whatever method is employed, controlling the payload-antibody ratio (PAR) is a challenge in terms of multiple aspects including: (i) obtaining homogeneous protein conjugates; (ii) obtaining unusual PARs (PAR is rarely other than 2, 4 or 8); (iii) using a single method to access a range of different PARs; (iv) applicability to various antibody formats; and (v) flexibility for the production of heterofunctional antibody-conjugates (e.g. attachment of multiple types of payloads). In this article, we report a single pyridazinedione-based trifunctional dual bridging linker that enables, in a two-step procedure (re-bridging/click), the generation of either mAb-, Fab'-, or Fc-conjugates from native mAb, (Fab')2 or Fc formats, respectively. Fc and (Fab')2 formats were generated via enzymatic digestion of native mAbs. Whilst the same reduction and re-bridging protocols were applied to all three of the protein formats, the subsequent click reaction(s) employed to graft payload(s) drove the generation of a range of PARs, including heterofunctional PARs. As such, exploiting click reactivity and/or orthogonality afforded mAb-conjugates with PARs of 6, 4, 2 or 4 + 2, and Fab'- and Fc-conjugates with a PAR of 3, 2, 1 or 2 + 1 on-demand. We believe that the homogeneity, novelty and variety in accessible PARs, as well as the applicability to various antibody-conjugate formats enabled by our non-recombinant method could be a suitable tool for antibody-drug conjugates optimisation (optimal PAR value, optimal payloads combination) and boost the development of new antibody therapeutics (Fab'- and Fc-conjugates).

Generation of DAR1 Antibody-Drug Conjugates for Ultrapotent Payloads Using Tailored GlycoConnect Technology

GlycoConnect technology can be readily adapted to provide different drug-to-antibody ratios (DARs) and is currently also evaluated in various clinical programs, including ADCT-601 (DAR2), MRG004a (DAR4), and XMT-1660 (DAR6). While antibody-drug conjugates (ADCs) typically feature a DAR2-8, it has become clear that ADCs with ultrapotent payloads (e.g., PBD dimers and calicheamicin) can only be administered to patients at low doses (<0.5 mg/kg), which may compromise effective biodistribution and may be insufficient to reach target receptor saturation in the tumor. Here, we show that GlycoConnect technology can be readily extended to DAR1 ADCs without the need of antibody re-engineering. We demonstrate that various ultrapotent, cytotoxic payloads are amenable to this methodology. In a follow-up experiment, HCC-1954 tumor spheroids were treated with either an AlexaFluor647-labeled DAR1 or DAR2 PBD-based ADC to study the effect on tumor penetration. Significant improvement of tumor spheroid penetration was observed for the DAR1 ADC compared to the DAR2 ADC at an equal payload dose, underlining the potential of a lower DAR for ADCs bearing ultrapotent payloads.

Investigation of mitochondrial targeting ability of sydnones and sydnonimines and mitochondria-targeted delivery of celecoxib

Mitochondria are considered to be a promising target in cancer diagnosis and therapeutics. Recently, sydnone and sydnonimine, as mesoionic bioorthogonal reagents, have been used in cell labeling and drug delivery. Here we investigated the mitochondrial targeting ability of sydnones and sydnonimines for the first time. Experimental results show that sydnone and sydnonimine themselves have high mitochondrial distribution. However, the introduction of a phenyl group into the C₄ position of sydnone dramatically decreases the mitochondrial affinity. In addition, we took advantage of mitochondrial targeting ability and click-and-release reaction of sydnonimine to evaluate anticancer activities of in-mitochondria delivery of celecoxib against HeLa and HepG2 cells, indicating that celecoxib-induced cancer cell death may not involve mitochondria-related pathway.

In Vivo Applications of Bioorthogonal Reactions: Chemistry and Targeting Mechanisms

Bioorthogonal chemistry involves selective biocompatible reactions between functional groups that are not normally present in biology. It has been used to probe biomolecules in living systems, and has advanced biomedical strategies such as diagnostics and therapeutics. In this review, the challenges and opportunities encountered when translating in vitro bioorthogonal approaches to in vivo settings are presented, with a focus on methods to deliver the bioorthogonal reaction components. These methods include metabolic bioengineering, active targeting, passive targeting, and simultaneously used strategies. The suitability of bioorthogonal ligation reactions and bond cleavage reactions for in vivo applications is critically appraised, and practical considerations such as the optimum scheduling regimen in pretargeting approaches are discussed. Finally, we present our own perspectives for this area and identify what, in our view, are the key challenges that must be overcome to maximise the impact of these approaches.

Fluorogenic sydnonimine probes for orthogonal labeling

A FRET-based fluorescence turn-on probe is designed, which employs a sydnonimine as the linker to match specific fluorophore and quencher pairs and releases the fluorescence after the "click-and-release" reaction. Furthermore, we realized selective fluorescence labeling by exploiting the mutual orthogonality between sydnonimine-DIBAC and tetrazine-1,3-Cp cycloaddition pairs.

Design and Development of a Bioorthogonal, Visualizable and Mitochondria-Targeted Hydrogen Sulfide (H2 S) Delivery System

Hydrogen sulfide (H₂ S) is an important endogenous gasotransmitter, but the targeted delivery and real-time feedback of exogenous H₂ S are still challenging. With the aid of density functional theory (DFT) calculations, we designed a new 1,3-dithiolium-4-olate (DTO) compound, which can react with a strained alkyne via the 1,3-dipolar cycloaddition and the retro-Diels-Alder reaction to generate carbonyl sulfide (COS) as the precursor of H₂ S, and a thiophene derivative with turn-on fluorescence. Moreover, the diphenylamino substituent in DTO greatly increases the mitochondrial targeting of this H₂ S delivery system. Such a bioorthogonal click-and-release reaction has integrated three functions in one system for the first time: (1) in situ controllable H₂ S release, (2) concomitant fluorescence response, and (3) mitochondria-targeted delivery. In addition, we investigated the mitochondrial membrane potential loss alleviation by using this system in H9c2 cells under oxidative stress.

Click and Bio-Orthogonal Reactions with Mesoionic Compounds

Click and bio-orthogonal reactions are dominated by cycloaddition reactions in general and 1,3-dipolar cycloadditions in particular. Among the dipoles routinely used for click chemistry, azides, nitrones, isonitriles, and nitrile oxides are the most popular. This review is focused on the emerging click chemistry that uses mesoionic compounds as dipole partners. Mesoionics are a very old family of molecules, but their use as reactants for click and bio-orthogonal chemistry is quite recent. The facility to derivatize these dipoles and to tune their reactivity toward cycloaddition reactions makes mesoionics an attractive opportunity for future click chemistry development. In addition, some compounds from this family are able to undergo click-and-release reactions, finding interesting applications in cells, as well as in animals. This review covers the synthetic access to main mesoionics, their reaction with dipolarophiles, and recent applications in chemical biology and heterocycle synthesis.

Bioorthogonal Ligations and Cleavages in Chemical Biology

Bioorthogonal reactions including the bioorthogonal ligations and cleavages have become an active field of research in chemical biology, and they play important roles in chemical modification and functional regulation of biomolecules. This review summarizes the developments and applications of the representative bioorthogonal reactions including the Staudinger reactions, the metal-mediated bioorthogonal reactions, the strain-promoted cycloadditions, the inverse electron demand Diels-Alder reactions, the light-triggered bioorthogonal reactions, and the reactions of chloroquinoxalines and ortho-dithiophenols.

Access to N-Carbonyl Derivatives of Iminosydnones by Carbonylimidazolium Activation

A new methodology for N-exocyclic functionalization of iminosydnones was developed involving the addition of a large variety of nucleophiles on carbonyl-imidazolium-activated iminosydnones. This practical and highly versatile method provided access to new classes of iminosydnones and opened a straightforward synthetic route to prepare iminosydnone-based prodrugs.

Fluorogenic iminosydnones: bioorthogonal tools for double turn-on click-and-release reactions

Iminosydnones are able to quench two fluorophores when connected to their core structure. Bioorthogonal click and release reaction with cyclooctynes provokes significant fluorescence enhancement of the two products, allowing their tracking in cells.