A facile way to obtain near-infrared room-temperature phosphorescent soft materials based on Bodipy dyes

Visible-light-excited organic room temperature phosphorescence

Purely organic room temperature phosphorescence (RTP) materials have evoked considerable attention owing to their fantastic optical properties and broad application prospects. However, most of the reported organic RTP materials can be only excited by UV light, leading to accelerated photoaging of organic phosphors and severe lesions of organisms under excitation. In contrast to UV light, visible light (380-780 nm) has much lower phototoxicity, deeper penetrability and easier accessibility, which make visible-light-excited RTP materials more favorable for practical uses, especially for life-related applications. Although it remains greatly challenging to construct visible-light-excited RTP materials, impressive progress has been made with the rapid development of this field. Herein, we systematically outline the significant progress achieved in visible-light-excited RTP materials, including the design and construction strategies, unique properties, underlying mechanisms and their vital applications. In the final section, we highlight the current challenges and research perspectives for suggesting future studies of visible-light-excited RTP materials.

Achieving Near-Infrared Phosphorescence Supramolecular Hydrogel Based on Amphiphilic Bromonaphthalimide Pyridinium Hierarchical Assembly

Phosphorescent supramolecular hydrogels are currently a prevalent topic for their great promise in various photonic applications. Herein, an efficient near-infrared (NIR) phosphorescence supramolecular hydrogel is reported via the hierarchical assembly strategy in aqueous solution, which is fabricated from amphiphilic bromonaphthalimide pyridinium derivative (G), exfoliated Laponite (LP) nanosheets, and polymeric polyacrylamide (PAAm). Initially, G spontaneously self-aggregates into spherical nanoparticles covered with positively charged pyridinium units and emits single fluorescence at 410 nm. Driven by electrostatic interactions with negatively charged nanosheets, the nanoparticles subsequently function as the cross-linked binders and coassemble with LP into supramolecular hydrogels with an engendered red room-temperature phosphorescence (RTP) up to 620 nm. Benefiting from hydrogen-bonding interactions-mediated physical cross-linkage, the further introduction of PAAm not only significantly elevates the mechanical strength of the hydrogels showing fast self-healing capability, but also increases phosphorescence lifetime from 2.49 to 4.20 ms, especially generating phosphorescence at even higher temperature (τ 363 K = 2.46 ms). Additionally, efficient RTP energy transfer occurs after doping a small amount of organic dye heptamethine cyanine (IR780) as an acceptor into hydrogels, resulting in a long-lived NIR emission at 823 nm with a high donor/acceptor ratio, which is successfully applied for cell labeling in the NIR window.

Molecularly Engineered Room-Temperature Phosphorescence for Biomedical Application: From the Visible toward Second Near-Infrared Window

Phosphorescence, characterized by luminescent lifetimes significantly longer than that of biological autofluorescence under ambient environment, is of great value for biomedical applications. Academic evidence of fluorescence imaging indicates that virtually all imaging metrics (sensitivity, resolution, and penetration depths) are improved when progressing into longer wavelength regions, especially the recently reported second near-infrared (NIR-II, 1000-1700 nm) window. Although the emission wavelength of probes does matter, it is not clear whether the guideline of "the longer the wavelength, the better the imaging effect" is still suitable for developing phosphorescent probes. For tissue-specific bioimaging, long-lived probes, even if they emit visible phosphorescence, enable accurate visualization of large deep tissues. For studies dealing with bioimaging of tiny biological architectures or dynamic physiopathological activities, the prerequisite is rigorous planning of long-wavelength phosphorescence, being aware of the cooperative contribution of long wavelengths and long lifetimes for improving the spatiotemporal resolution, penetration depth, and sensitivity of bioimaging. In this Review, emerging molecular engineering methods of room-temperature phosphorescence are discussed through the lens of photophysical mechanisms. We highlight the roles of phosphorescence with emission from visible to NIR-II windows toward bioapplications. To appreciate such advances, challenges and prospects in rapidly growing studies of room-temperature phosphorescence are described.

Host-Guest Photosensitizer of a Cationic BODIPY Derivative and Cucurbit[7]uril for High-Efficiency Visible Light-Induced Photooxidation Reactions

In recent years, there has been a notable surge of interest in the fields of organic and pharmaceutical research about photocatalysts (PCs) and photosensitizers (PSs). In this study, a 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene (BODIPY) molecule adorned with quaternary ammonium (TMB) functionality was meticulously designed and synthesized. This compound has remarkable characteristics such as exceptional water solubility, great optical qualities, and commendable photostability. It can form a 1:1 complex (TMB-CB[7]) with cucurbit[7]uril (CB[7]) through host-guest interactions in the aqueous solution and shows obvious fluorescence enhancement. The reactive oxygen species (ROS) including superoxide anion radical (O2·-) and singlet oxygen (1O2) generation ability of TMB-CB[7] were promoted compared with that of TMB in the aqueous solution. More interestingly, the ROS generated from TMB-CB[7] can be used as PCs for aerobic cross dehydrogenation coupling reactions and photooxidation reactions in water with high yields of 89 and 95%, respectively. Therefore, the utilization of a host-guest PS presents a novel and environmentally friendly approach for conducting photocatalyzed organic processes under ambient conditions using visible light.

Phosphorescence resonance energy transfer from purely organic supramolecular assembly

Phosphorescence energy transfer systems have been applied in encryption, biomedical imaging and chemical sensing. These systems exhibit ultra-large Stokes shifts, high quantum yields and are colour-tuneable with long-wavelength afterglow fluorescence (particularly in the near-infrared) under ambient conditions. This review discusses triplet-to-singlet PRET or triplet-to-singlet-to-singlet cascaded PRET systems based on macrocyclic or assembly-confined purely organic phosphorescence introducing the critical toles of supramolecular noncovalent interactions in the process. These interactions promote intersystem crossing, restricting the motion of phosphors, minimizing non-radiative decay and organizing donor-acceptor pairs in close proximity. We discuss the applications of these systems and focus on the challenges ahead in facilitating their further development.

A Supramolecular Naphthalene Diimide Radical Anion with Efficient NIR-II Photothermal Conversion for E. coli-Responsive Photothermal Therapy

We report a supramolecular naphthalene diimide (NDI) radical anion with efficient NIR-II photothermal conversion for E. coli-responsive photothermal therapy. The supramolecular radical anion (NDI-2CB[7])⋅- , which is obtained from the E. coli-induced in situ reduction of NDI-2CB[7] neutral complex, formed by the host-guest interaction between an NDI derivative and cucurbit[7]uril (CB[7]), exhibits unexpectedly strong NIR-II absorption and remarkable photothermal conversion capacity in aqueous solution. The NIR-II absorption is caused by the self-assembly of NDI radical anions to form supramolecular dimer radicals in aqueous solution, which is supported by theoretically predicted spectra. The (NDI-2CB[7])⋅- demonstrates excellent NIR-II photothermal antimicrobial activity (>99 %). This work provides a new approach for constructing NIR-II photothermal agents and non-contact treatments for bacterial infections.

Origin of intersystem crossing in highly distorted organic molecules: a case study with red light-absorbing N,N,O,O-boron-chelated Bodipys

To explore the relationship between the twisted π-conjugation framework of aromatic chromophores and the efficacy of intersystem crossing (ISC), we have studied a N,N,O,O-boron-chelated Bodipy derivative possessing a severely distorted molecular structure. Surprisingly, this chromophore is highly fluorescent, showing inefficient ISC (singlet oxygen quantum yield, Φ_Δ = 12%). These features differ from those of helical aromatic hydrocarbons, where the twisted framework promotes ISC. We attribute the inefficient ISC to a large singlet-triplet energy gap (ΔE_S1/T1 = 0.61 eV). This postulate is tested by critical examination of a distorted Bodipy having an anthryl unit at the meso-position, for which Φ_Δ is increased to 40%. The improved ISC yield is rationalized by the presence of a T₂ state, localized on the anthryl unit, with energy close to that of the S₁ state. The electron spin polarization phase pattern of the triplet state is (e, e, e, a, a, a), with the T_z sublevel of the T₁ state overpopulated. The small zero-field splitting D parameter (-1470 MHz) indicates that the electron spin density is delocalized over the twisted framework. It is concluded that twisting of π-conjugation framework does not necessarily induce ISC, but S₁/T_n energy matching may be a generic feature for increasing ISC for a new-generation of heavy atom-free triplet photosensitizers.

J-aggregation strategy of organic dyes for near-infrared bioimaging and fluorescent image-guided phototherapy

With the continuous development of organic materials for optoelectronic devices and biological applications, J-aggregation has attracted a great deal of interest in both dye chemistry and supramolecular chemistry. Except for the characteristic red-shifted absorption and emission, such ordered head-to-tail stacked structures may be accompanied by special properties such as enhanced absorption, narrowed spectral bandwidth, improved photothermal and photodynamic properties, aggregation-induced emission enhancement (AIEE) phenomenon, and so forth. These excellent properties add great potential to J-aggregates for optical imaging and phototherapy in the near-infrared (NIR) region. Despite decades of development, the challenge of rationally designing the molecular structure to adjust intermolecular forces to induce J-aggregation of organic dyes remains significant. In this review, we discuss the formation of J-aggregates in terms of intermolecular interactions and summarize some recent studies on J-aggregation dyes for NIR imaging and phototherapy, to provide a clear direction and reference for designing J-aggregates of near-infrared organic dyes to better enable biological applications. This article is categorized under: Therapeutic Approaches and Drug Discovery > Emerging Technologies Diagnostic Tools > In Vivo Nanodiagnostics and Imaging Therapeutic Approaches and Drug Discovery > Nanomedicine for Oncologic Disease.

Color-Tunable Binary Copolymers Manipulated by Intramolecular Aggregation and Hydrogen Bonding

Construction of color-tunable luminescent polymeric materials with enhanced emission intensity and room-temperature phosphorescence (RTP) performance regulated by a single chromophore component is highly desirable in the scope of photoluminescent materials. Herein, a set of binary copolymers were facilely synthesized using free radical polymerization by selecting different types of polymer matrix and N-substituted naphthalimides (NPA) as chromophores. Surprisingly, the fluorescence emission of copolymers could be remarkably enhanced, because of the intramolecular aggregation of NPA manipulated by a single polymer chain in both solution and solid state. Moreover, RTP signals of binary copolymers were all clearly observed in the air without any processing procedure, because of the embedding of phosphors into hydrogen bonding networks after copolymerization with vinyl-based acrylamide monomers. Taking advantages of the synergistic effect of copolymerization-induced aggregation and copolymerization-induced rigidification to promote optical performance, UV stimulus-responsive luminescent polymer films with processability, flexibility, and adjustable emission wavelength were simply prepared using a drop-casting method in large scale, the setting of which is the basis for application in the fields of organic optoelectronics, information security, and bioimaging/sensing.

Thiazole Boron Difluoride Dyes with Large Stokes Shift, Solid State Emission and Room-Temperature Phosphorescence

The small Stokes shift and weak emission in the solid state are two main shortcomings associated with the boron-dipyrromethene (BODIPY) family of dyes. This study presents the design, synthesis and luminescent properties of boron difluoro complexes of 2-aryl-5-alkylamino-4-alkylaminocarbonylthiazoles. These dyes display Stokes shifts (Δλ, 77-101 nm) with quantum yields (ϕ_FL ) up to 64.9 and 34.7 % in toluene solution and in solid state, respectively. Some of these compounds exhibit dual fluorescence and room-temperature phosphorescence (RTP) emission properties with modulable phosphorescence quantum yields (ϕ_PL ) and lifetime (τ_p up to 251 μs). The presence of intramolecular H-bonds and negligible π-π stacking revealed by X-ray crystal structure might account for the observed large Stokes shift and significant solid-state emission of these fluorophores, while the enhanced spin-orbit coupling (SOC) of iodine and the self-assembly driven by halogen bonding, π-π and C-H^… π interactions could be responsible for the observed RTP of iodine containing phosphors.

On the Use of Polymer-Based Composites for the Creation of Optical Sensors: A Review

Polymers are widely used in many areas, but often their individual properties are not sufficient for use in certain applications. One of the solutions is the creation of polymer-based composites and nanocomposites. In such materials, in order to improve their properties, nanoscale particles (at least in one dimension) are dispersed in the polymer matrix. These properties include increased mechanical strength and durability, the ability to create a developed inner surface, adjustable thermal and electrical conductivity, and many others. The materials created can have a wide range of applications, such as biomimetic materials and technologies, smart materials, renewable energy sources, packaging, etc. This article reviews the usage of composites as a matrix for the optical sensors and biosensors. It highlights several methods that have been used to enhance performance and properties by optimizing the filler. It shows the main methods of combining indicator dyes with the material of the sensor matrix. Furthermore, the role of co-fillers or a hybrid filler in a polymer composite system is discussed, revealing the great potential and prospect of such matrixes in the field of fine properties tuning for advanced applications.

Metal Ions as the Third Component Coordinate with the Guest to Stereoscopically Enhance the Phosphorescence Properties of Doped Materials

The construction of multicomponent doped systems is an important direction for the development of phosphorescence materials. Herein, benzophenone is selected as the host, phenylquinoline isomers are designed as guests, and seven metal ions are selected as the third component (Al³⁺, Cu^+/2+, Zn²⁺, Ga³⁺, Ag⁺, Cd²⁺, and In³⁺) to construct the three-component doped system. Ag⁺ and Cd²⁺ can considerably increase the emission intensity up to 38 times, and the highest phosphorescence quantum efficiency reaches 70%. Al³⁺, Ga³⁺, and In³⁺ can prolong the emission wavelength, and the phosphorescence wavelength can be red-shifted up to 60 nm. Cu²⁺, Ga³⁺, and In³⁺ can extend the phosphorescence lifetime by a maximum of 3.6 times. A series of experiments demonstrated that the coordination of metals and guests is the key to improve the phosphorescence properties. This work presents a simple and effective strategy to enhance the phosphorescence properties of doped materials.

Ultralarge Stokes Shift Phosphorescence Artificial Harvesting Supramolecular System with Near-Infrared Emission

A two-step sequential phosphorescence harvesting system with ultralarge Stokes shift and near-infrared (NIR) emission at 825 nm is successfully constructed by racemic 1,2-diaminocyclohexan-derived 6-bromoisoquinoline (BQ), cucurbit[8]uril (CB[8]), and amphipathic sulfonatocalix[4]arene (SC4AD) via cascaded assembly strategy in aqueous solution. In virtue of the confinement effect of CB[8] with rigid cavity, BQ can generate an emerging phosphorescent emission at 555 nm. Subsequently, the binary BQ⊂CB[8] further assemblies with SC4AD to form close-packed spherical aggregate, which contributes to the dramatic enhancement of phosphorescence emission intensity ≈30 times with prolonged lifetime from 21.3 µs to 0.364 ms. Notably, the BQ⊂CB[8]@SC4AD assembly can serve as an energy donor to conduct stepwise phosphorescence harvesting process through successive introduction of primary acceptors, cyanine 5 (Cy5) or nile blue (NiB), and secondary acceptor, heptamethine cyanine (IR780). The final aggregate with remarkable ultralarge Stokes shift (≈525 nm) and long-lived NIR photoluminescence (PL) emission at 825 nm is further employed as imaging agent for NIR cell labeling.

Molecular Thermal Motion Modulated Room-Temperature Phosphorescence for Multilevel Encryption

The stimulus-responsive room-temperature phosphorescence (RTP) materials have become an increasingly significant topic in the fields of bioimaging, sensing, and anticounterfeiting. However, this kind of materials is scarce to date, especially for the ones with delicate stimulus-responsive behavior. Herein, a universal strategy for multilevel thermal erasure of RTP via chromatographic separation of host-guest doping RTP systems is proposed. The tunable host-guest systems, matrix materials, heating temperature, and time are demonstrated to allow precise six-level data encryption, QR code encryption, and thermochromic phosphorescence encryption. Mechanistic study reveals that the thermal-responsive property might be attributed to molecular thermal motion and the separation effect of the silica gel, which provides expanded applications of host-guest RTP materials such as cold chain break detection. This work offers a simple yet universal way to construct advanced responsive RTP materials.

A Computational-Experimental Approach to Unravel the Excited State Landscape in Heavy-Atom Free BODIPY-Related Dyes

We performed a time-gated laser-spectroscopy study in a set of heavy-atom free single BODIPY fluorophores, supported by accurate, excited-state computational simulations of the key low-lying excited states in these chromophores. Despite the strong fluorescence of these emitters, we observed a significant fraction of time-delayed (microseconds scale) emission associated with processes that involved passage through the triplet manifold. The accuracy of the predictions of the energy arrangement and electronic nature of the low-lying singlet and triplet excited states meant that an unambiguous assignment of the main deactivation pathways, including thermally activated delayed fluorescence and/or room temperature phosphorescence, was possible. The observation of triplet state formation indicates a breakthrough in the "classic" interpretation of the photophysical properties of the renowned BODIPY and its derivatives.

Clustering and halogen effects enabled red/near-infrared room temperature phosphorescence from aliphatic cyclic imides

Pure organic room temperature phosphorescence (RTP) materials become increasingly important in advanced optoelectronic and bioelectronic applications. Current phosphors based on small aromatic molecules show emission characteristics generally limited to short wavelengths. It remains an enormous challenge to achieve red and near-infrared (NIR) RTP, particularly for those from nonaromatics. Here we demonstrate that succinimide derived cyclic imides can emit RTP in the red (665, 690 nm) and NIR (745 nm) spectral range with high efficiencies of up to 9.2%. Despite their rather limited molecular conjugations, their unique emission stems from the presence of the imide unit and heavy atoms, effective molecular clustering, and the electron delocalization of halogens. We further demonstrate that the presence of heavy atoms like halogen or chalcogen atoms in these systems is important to facilitate intersystem crossing as well as to extend through-space conjugation and to enable rigidified conformations. This universal strategy paves the way to the design of nonconventional luminophores with long wavelength emission and for emerging applications.

Pure organic room temperature phosphorescence (RTP) materials become increasingly important but achieving red and near-infrared (NIR) RTP remains challenging. Here, the authors demonstrate that succinimide derived cyclic imides can emit RTP in the red and NIR spectral range with outstanding efficiencies of up to 9.2%.

Near-Infrared Phosphorescent Switch of Diarylethene Phenylpyridinium Derivative and Cucurbit[8]uril for Cell Imaging

Near-infrared (NIR) pure organic room-temperature phosphorescence (RTP) materials have received growing research interest due to their wide application in the fields of high-resolution bioimaging and luminescent materials. In this work, the authors report a macrocycle-confined pure organic RTP supramolecular assembly, which is constructed by diarylethene phenylpyridinium derivative (DTE-TP) and cucurbit[8]uril (CB[8]). Compared with CB[6] and CB[7], the larger cavity of CB[8] induces molecular folding and enhances the intramolecular charge transfer interactions, which leads to the obtained assembly emitting efficient NIR phosphorescence at 700 nm. Due to the photochromism of the diarylethene core, the NIR phosphorescence is reversibly regulated by light irradiation at wavelengths of 365 and >600 nm. Furthermore, cell-based experiments show that this supramolecular assembly is located in the lysosomes and displays a NIR phosphorescence at 650-750 nm. In addition, by means of phosphorescence resonance energy transfer, the obtained assembly exhibits a red-shifted NIR emission at 817 nm. This supramolecular phosphorescent switch provides a convenient path for the modular design of water-soluble pure organic room-temperature NIR phosphorescent materials.

Triplet exciton dynamics of pure organics with halogen substitution boosted two photon absorption and room temperature phosphorescence: A theoretical perspective

Organic room temperature phosphorescence (RTP) molecules have shown promising applications in organic light emitting diodes and vivo imaging. Thus, triplet exciton dynamics in solid phase should be revealed and the molecule should possess large two photon absorption (TPA) cross sections under near-infrared excitation. The effects of halogen substitution and intermolecular interaction on RTP and TPA properties are studied at molecular level for a series of derivatives. Surrounding environment in solid phase is considered by combined quantum mechanics and molecular mechanics method. Intermolecular interactions are evaluated by the independent gradient model and calculated through the molecular force field energy decomposition method. Minimum energy crossing point, Huang-Rhys factor and reorganization energy are discussed, triplet exciton dynamics are investigated by thermal vibration correlation function method. Results indicate that the largest TPA cross sections are found for molecule in water. The halogen substitution can enlarge the proportion of (π, π*) and facilitate the intersystem crossing process. Restricted intramolecular rotation motions of dihedral angle in low frequency regions are found for Br-Np-Cz-BF₂ in solid phase. While enhanced vibrations of bond length and bond angle in high frequency regions are detected for I-Np-Cz-BF₂. Effects of halogen substitution and intermolecular interaction on triplet exciton dynamics are highlighted.

Stepwise Energy Transfer: Near-Infrared Persistent Luminescence from Doped Polymeric Systems

Organic near infrared (NIR) persistent-luminescence systems with bright and long-lived emission are highly valuable for applications in communication, imaging, and sensors. However, realizing these materials (especially lifetime over 0.1 s) is a challenge, mainly because of non-radiative quenching of their long-lived excitons. Herein, a universal strategy of stepwise Förster resonance energy transfer (FRET) for a bright NIR system with remarkable persistent luminescence (up to 0.2 s at 810 nm) is presented, based on a new triphenylene-dye-doped polymer (triphenylene-2-ylboronic acid@poly(vinyl alcohol) (TP@PVA)) with a persistent blue phosphorescence of 3.29 s. This persistent NIR luminescence is demonstrated for application not only in NIR anti-counterfeiting but also NIR bioimaging with penetrating a piece of skin as thick as 2.0 mm. By co-doping a red dye (such as Nile red) and an NIR dye Cyanine 7 (Cy7) into this doped PVA film, the shortage of spectral overlap between TP emission and Cy7 absorbance is successfully solved, through a stepwise FRET process involving triplet to singlet (TS)-FRET from TP to the intermediate red dye and then singlet to singlet (SS)-FRET to Cy7. It is noted that the efficiency of the upper TS-FRET is enhanced significantly by the lower SS-FRET, leading to high efficiencies for the continuous FRETs.

Room temperature tunable multicolor phosphorescent polymers for humidity detection and information encryption

Amorphous polymer-based room temperature phosphorescence (RTP) materials exhibiting tunable emission colors have received tremendous attention and are extremely challenging to prepare. Herein, polyacrylamide-based RTP materials with tunable multicolor emission were prepared via copolymerizing phosphor with concentration dependent luminescence colors and acrylamide with different molar ratios. The hydrogen bonding interactions and chemically crosslinked structures in these polymers effectively restrict the mobility of phosphors and activate efficient RTP emission. The molar ratio of phosphor and acrylamide has a significant influence on the photophysical properties of these polymers, which can be used to fabricate multicolor materials. In addition, the RTP intensity decreases with increasing humidity due to the disassociation of hydrogen bonding by adsorption of water, manifesting as a humidity sensor. Benefiting from the distinguishable RTP lifetimes and the responsiveness to humidity, triple encoding for information encryption is successfully realized.

Near-infared upper phenyl-fused BODIPY as photosensitizer for photothermal-photodynamic therapy

BODIPY scaffolds by introducing ring-fused segment promoted bathochromic-shift spectrum and enhanced intersystem crossing capability by a twisted structure. In this work, we designed the upper phenyl-fused BODIPY with 4-dimethylaminostyryl groups...

Cucurbit[n]uril-based host-guest interaction enhancing organic room-temperature phosphorescence of phthalic anhydride derivatives in aqueous solution

A cyan RTP in aqueous solution was enhanced by supramolecular host–guest complexation of water-soluble halogen-substituted phthalic anhydride (PA) derivatives with cucurbit[n]urils (CB[n]s).

Converting molecular luminescence to ultralong room-temperature phosphorescence via the excited state modulation of sulfone-containing heteroaromatics

Manipulating the molecular orbital properties of excited states and the subsequent relaxation processes can greatly alter the emission behaviors of luminophores. Herein we report a vivid example of this, with luminescence conversion from thermally activated delayed fluorescence (TADF) to ultralong room-temperature phosphorescence (URTP) via a facile substituent effect on a rigid benzothiazino phenothiazine tetraoxide (BTPO) core. Pristine BTPO with multiple heteroatoms shows obvious intramolecular charge transfer (ICT) excited states with small exchange energy, featuring TADF. Via delicately functionalizing the BTPO core with peripheral moieties, the excited states of the BTPO derivatives become a hybridized local and charge transfer (HLCT) state in the S1 state and a local excitation (LE) dominated HLCT state in the T1 state, with enlarged energy bandgaps. Upon dispersion in a polymer matrix, the BTPO derivatives exhibit a persistent bright green afterglow with long lifetimes of up to 822 ms and decent quantum yields of up to 11.6%.

1,7-Di-tert-butyl-Substituted aza-BODIPYs by Low-Barrier Rotation to Enhance a Photothermal-Photodynamic Effect

1,7-Di-tert-butyl-substituted aza-BODIPYs (tBu-azaBDP) were successfully obtained for the first time. The structures of tBu-azaBDP and Ph-azaBDP were confirmed by X-ray crystal analysis, and tBu-azaBDP 2 is more twisted than Ph-azaBDP 5. tBu-azaBDPs have significant photo-stability and enhanced water solubility. tBu-azaBDPs possess excellent optical properties, such as high molar extinction coefficients, broad full width half maxima, and large Stokes shifts, which is comparable to those of the parent dye Ph-azaBDP. Although the low-barrier rotation of the distal -tBu groups in tBu-azaBDPs results in low quantum yield, photothermal conversion efficiency and singlet oxygen generation ability of tBu-azaBDPs are more effective than those of Ph-azaBDP, which is highly desirable for a photothermal-photodynamic therapy agent.

Polyacrylamide-Based Binary Luminescent Copolymer Materials Exhibit Color-Tunable and Efficient Long-Lived Room Temperature Phosphorescence

Polymer-based pure organic room temperature phosphorescence (RTP) materials have garnered considerable interest, among which RTP systems with prolonged lifetimes and tunable emission colors are promising for applications in sensing, flexible electronics, bioassay, anti-counterfeiting, and data encryption. Herein, facile doping method is reported based on two types of copolymers with benzene/biphenyl-based light-emitting cores as their side chains, whereby the two copolymers are robustly crosslinked via noncovalent interactions including hydrogen bonding and halogen bonding that occur between the light-emitting cores and polyacrylamide backbones. Persistent RTP emission with prolonged lifetime up to 1.9 s and phosphorescence quantum yield as high as 40.1% are obtained in single copolymers, attributed to the conformation restriction of phosphorescent dyes originating from the rigid microenvironment. Furthermore, multicolor phosphorescence signals are observed in the doped binary luminescent copolymer systems that can be effectively regulated by the feed ratio of luminescent cores and irradiation wavelengths. Possible mechanisms for this efficient and long-lived color-tunable RTP system are discussed on the basis of the experimental data and theoretical calculations. In addition, it is also demonstrated that the color-tunable RTP emission of the doped copolymer systems under ambient conditions allows for further exploitation in the application of dynamic information encryption.

Unexpected long room-temperature phosphorescence lifetimes of up to 1.0 s observed in iodinated molecular systems

We investigate the heavy atom effect on difluoroboron(iii) β-diketonate (BF₂bdk) luminescent compounds. The iodine-substituted BF₂bdk powders with 38 wt% iodine substituents show insignificant afterglow at 77 K. Unexpectedly, when doped into phenyl benzoate matrices, the iodine-substituted BF₂bdk exhibits bright room-temperature phosphorescence with lifetimes of up to 1.0 s under ambient conditions.

Electron spin dynamics in excited state photochemistry: recent development in the study of intersystem crossing and charge transfer in organic compounds

Electron spin dynamics are crucial to photochemical and photophysical processes. However, to a large extent, they are neglected in routine photochemistry studies. Herein, we summarized the recent developments of electron spin dynamics in organic molecular systems. The electron-spin selective intersystem crossing (ISC) as well as charge separation (CS) and charge recombination (CR) of the organic molecular system are discussed, including ISC of the compounds with twisted π-conjugation frameworks and CR-induced ISC in compact orthogonal electron donor-acceptor dyads. We found that the electron spin polarization (ESP) of the triplet state formed in these systems is highly dependent on the molecular structure and geometry. The zero-field-splitting (ZFS) D and E parameters of the triplet state of series chromophores determined with time-resolved electron paramagnetic resonance (TREPR) spectroscopy are presented. Some unanswered questions in related areas are raised, which may inspire further theoretical investigations. The examples demonstrate that the study of electron spin dynamics is not only important in fundamental photochemistry to attain in-depth understanding of the ISC and the charge transfer processes, but is also useful for designing new efficient organic molecular materials for applications including photodynamic therapy, organic light-emitting diodes, and photon upconversion.

Substituent effects on opticalproperties of pyrrolizine-fused BOPYIN

Three new pyrrolizine-fused BOPYINs (DAB-H, DAB-OMe, DAB-ester) have been reported in 26-35% yield. The relationship between structures and optical spectra was investigated, which all the compounds show large Stokes Shift (3146-3884 cm^-1) and high quantum yield (up to 99%) in solvents. Among these dyes, the decoration of electron donating/withdrawing groups on indole, pyrrole and pyrrolizine units has a significant impact on optical properties, especially emission spectra. The results suggested that electron withdrawing group on pyrrole and pyrrolizine units has hypsochromic shift on emission spectra (DAB-H, DAB-OMe, DAB-ester versus DAB-1,4,5). The optimized structure, electron distribution on frontier molecular orbital, energy gap and simulated stick spectra of DABs are discussed by Density Functional Theory (DFT) calculation. We claim the agreement between the experimental and theoretical absorption spectra.

Does Twisted π-Conjugation Framework Always Induce Efficient Intersystem Crossing? A Case Study with Benzo[b]- and [a]Phenanthrene-Fused BODIPY Derivatives and Identification of a Dark State

The photophysical properties, especially the intersystem crossing (ISC) of two heavy-atom-free BODIPY derivatives with twisted π-conjugated frameworks (benzo[b]-fused BODIPY, BDP-B; and [a]phenanthrene-fused BODIPY, BDP-P), are studied with steady-state and time-resolved optical and electron paramagnetic resonance (TREPR) spectroscopic methods as well as with ADC(2) theoretical investigations. Interestingly, BDP-B has a planar π-conjugation framework, but it displays weaker UV-vis absorption (ε = 3.8 × 10⁴ M^-1 cm^-1 at 569 nm) and fluorescence (Φ_F < 0.1%), a short-lived singlet-excited state (fluorescence lifetime, τ_F = 0.2 ns), and a long-lived triplet state (τ_T = 132.3 μs). In comparison, the more twisted BDP-P shows stronger UV-vis absorption (ε = 9.8 × 10⁴ M^-1 cm^-1 at 640 nm) and fluorescence (Φ_F = 70%), longer singlet-excited-state lifetime (τ_F = 6.4 ns), and shorter triplet-state lifetime (τ_T = 18.9 μs). In contrast to helicenes (Φ_T = ca. 90%), the ISC of BDP-P and BDP-B is nonefficient (Φ_T < 23%). The electron spin selectivity of the ISC of the derivatives is different, manifested by the phase pattern of the TREPR spectra as AAEAEE and EEEAAA for BDP-B and BDP-P, respectively. The spatially confined T₁ state wave function of the twisted molecule keeps the T₁ state energy high (1.44-1.61 eV). A dark S₁ state was identified for BDP-B. This work demonstrated that the twisted π-conjugated framework does not necessarily induce efficient ISC and we found a dark singlet state for BODIPY, which is rare.

Red-light excited efficient metal-free near-infrared room-temperature phosphorescent films

A set of red-light-excited, metal-free room-temperature phosphorescence (RTP) systems was constructed with brominated phenolsulfonephthaleine derivatives. The best metal-free RTP system has the reddest near-infrared (NIR) RTP emission (λ_p = 819 nm) with the highest phosphorescence quantum yield (Φ_RTP = 3.0%) so far identified. The RTP emission can be switched ON-OFF by adding acid and alkali alternately. A logic operation with half-subtractor function and dual-channel response (visible light emission/NIR RTP emission) was also constructed based on these properties.

Luminescence lifetime imaging of ultra-long room temperature phosphorescence on a smartphone

Luminescence lifetime imaging plays an important role in distinguishing the luminescence decay rates in time-resolved luminescence imaging. However, traditional imaging instruments used for detecting lifetimes within milliseconds would be time-consuming when imaging ultra-long luminescence lifetimes over subseconds. Herein, we present an accessible and simple optical system for detecting lifetimes of persistent luminescence. A smartphone integrated with a UV LED, a dichroic mirror, and a lens was used for recording the persistent luminescence. With only a few seconds of data acquisition, a luminescence lifetime image could be processed from the video by exponential fitting of the gray level of each pixel to the delay time. Since this approach only requires single excitation, no synchronous control is needed, greatly simplifying the apparatus and saving the cost. The apparatus was successfully used for ultra-long luminescence lifetime imaging of mouse tissue dyed with a persistent luminescence molecule. This miniaturized apparatus exhibits huge potentiality in time-resolved luminescence imaging for luminescence study and biological detection.

Color-Tunable Aqueous Room-Temperature Phosphorescence Supramolecular Assembly

Developing room-temperature phosphorescence (RTP) materials with color-tunability performance in an aqueous environment is crucial for application in optoelectronic areas to a higher stage, such as multicolor display, visual detection of external stimulus, and high-level information anticounterfeiting, but still faces a formidable challenge. Herein, we propose an efficient design strategy to develop excitation wavelength-responsive RTP supramolecular co-assembly systems of a simple benzoic acid derivative and Laponite (Lap) clay nanoplates in aqueous solution, displaying an ultralong lifetime (0.632 s) and a high phosphorescence quantum efficiency (18.04%) simultaneously. Experimental and theoretical research studies suggest that this distinctive feature is due to the generation of more and efficient intersystem crossing pathways benefiting from the coexistence of isolated and J-aggregation states via controlling the doping of the benzoic acid derivative and the inhibition of phosphorescence quenching by water because of the synergistic effects of robust hydrogen-bonding interactions between Lap and the benzoic acid derivative, J-aggregations of the benzoic acid derivative, and good oxygen tolerance of the Lap clay. By virtue of their excellent RTP performances in aqueous solution, the visual colorimetric detection of Ag⁺ in a water environment was achieved for the first time, and visible and high-level information encryption was accomplished as well.

Twisted BODIPY derivative: intersystem crossing, electron spin polarization and application as a novel photodynamic therapy reagent

The photophysical properties of a heavy atom-free BODIPY derivative with a twisted π-conjugated framework were studied. Efficient intersystem crossing (ISC quantum yield: 56%) and an exceptionally long-lived triplet state were observed (4.5 ms in solid polymer film matrix and 197.5 μs in solution). Time-resolved electron paramagnetic resonance (TREPR) spectroscopy and DFT computations confirmed the delocalization of the triplet state on the whole twisted π-conjugated framework and the zero-field-splitting (ZFS) D parameter of D = -69.5 mT, which is smaller than that of 2,6-diiodoBODIPY (D = -104.6 mT). The electron spin polarization (ESP) phase pattern of the triplet state TREPR spectrum of the twisted BODIPY is (a, a, e, a, e, e), which is different from that of 2,6-diiodo BODIPY (e, e, e, a, a, a), indicating that the electron spin selectivity of the ISC of the twisted structure is different from that of the spin orbital coupling effect. According to the computed spin-orbit coupling matrix elements (0.154-1.964 cm^-1), together with the matched energy of the S₁/T_n states, ISC was proposed to occur via S₁→T₂/T₃. The computational results were consistent with TREPR results on the electron spin selectivity (the overpopulation of the T_Y sublevel of the T₁ state). The advantage of the long-lived triplet state of the twisted BODIPY was demonstrated by its efficient singlet oxygen (¹O₂) photosensitizing (Φ_Δ = 50.0%) even under a severe hypoxia atmosphere (pO₂ = 0.2%, v/v). A high light toxicity (EC₅₀ = 1.0 μM) and low dark toxicity (EC₅₀ = 78.5 μM) were observed for the twisted BODIPY, and thus the cellular studies demonstrate its potential as a novel potent heavy atom-free photodynamic therapy (PDT) agent.

Weakened Triplet-Triplet Annihilation of Diiodo-BODIPY Moieties without Influence on Their Intrinsic Triplet Lifetimes in Diiodo-BODIPY-Functionalized Pillar[5]arenes

The triplet-triplet annihilation (TTA) effect of sensitizers themselves can lead to the additional quenching of lifetimes of triplet states; therefore, how to weaken the TTA effect of sensitizers is an urgent issue to be resolved for their further applications. Besides, it remains a tremendous challenge for constructing supramolecular systems of photosensitizers based on photosensitizer-functionalized pillararenes because there have been very few investigations on them. Thus, 2,6-diiodo-1,3,5,7-tetramethyl-8-phenyl-4,4-difluoroboradiazaindacene (DIBDP) and ethoxy pillar[5]arene (EtP5) were utilized to synthesize a DIBDP-functionalized pillar[5]arene (EtP5-DIBDP), a cyano-containing DIBDP (G) used as a guest molecule was also prepared, and they were used to investigate the electron-transfer mechanism between EtP5 and DIBDP moieties and weaken the TTA effect of DIBDP moieties. The theoretical computational results of frontier molecular orbitals and isosurfaces of spin density preliminarily predicted that the cavities of the EtP5 moiety had influence on the fluorescence emission of DIBDP units but not on their triplet states in EtP5-DIBDP. The fluorescence emission intensities in a variety of solvents with different polarities and electrochemical studies revealed that there was electron transfer from EtP5 to the DIBDP units, and the electron-transfer process had influence on the fluorescence emission but not on the triplet states of DIBDP moieties in EtP5-DIBDP, which verified the results of density functional theory calculations. The triplet state lifetimes of EtP5-DIBDP were longer than those of DIBDP and G and the photooxidation abilities of EtP5-DIBDP were better than those of DIBDP and G at a high concentration (1.0 × 10^-5 M) in various solvents; in contrast, the intrinsic triplet state lifetimes and singlet oxygen quantum yields (Φ_Δ) of DIBDP, G, and EtP5-DIBDP were very similar. This was because the steric hindrance of EtP5 moieties could weaken the TTA effect of DIBDP moieties without influencing their intrinsic triplet state lifetimes in EtP5-DIBDP.

Real-Time Visual Monitoring of Kinetically Controlled Self-Assembly

The construction of artificial structures through hierarchical self-assembly based on noncovalent interactions, as well as monitoring during the self-assembly process, are important aspects of dynamic supramolecular chemistry. Herein we describe the complex dynamics of chiral N,N'-diphenyl dihydrodibenzo[a,c]phenazine derivatives (S)/(R)-DPAC, whose different assemblies were found to have distinct optical and morphological characteristics. With ratiometric fluorescence originating from vibration-induced emission (VIE), the self-assembly process from kinetic traps to the thermodynamic equilibrium state could be monitored in real time by optical spectrometry. During the morphology transformation from particles to nanobricks, strong circularly polarized luminescence was induced with g_lum =1.6×10^-2 . The excited-state characteristics of the self-assemblies enabled investigation of the relationship between molecular aggregation and conformational change, thus allowing effective monitoring of the sophisticated supramolecular self-assembly process.

Conformation-Dependent Phosphorescence of Galactose-Decorated Phosphors and Assembling-Induced Phosphorescence Enhancement

Amorphous organic room-temperature phosphorescent (RTP) materials are promising for their facile preparation and processability, while the conformation effects of phosphors at amorphous state are lack of study in comparison with the rigid effects due to the commonly irregular assembling and dispersal of phosphors in rigid systems. Herein, we report a series of phosphorescent molecules modified by polyhydroxy galactose, whose RTP emission at the amorphous state can be regulated by controlling the conformational distortion of the phosphorescent segments. Further, a strong RTP emission is facilely obtained by the co-assembling between polyhydroxy phosphors and polyhydroxy matrices (α-CD, β-CD, and chitosan). Owing to the rigid effect of the enhanced hydrogen bonding cross-linking, the highest RTP quantum yield reaches 19.4%; whereas, the RTP emissions of assemblies become conformation insensitive. The conflicting relationship between the conformation effect and rigid effect is attributed to the differences between aggregated single-component systems and dispersed assembling systems. Besides, the unique and different moisture responsiveness of the co-assembling samples is discovered and further applied in data encryption. The research expands the scope for designing amorphous pure organic RTP materials with supramolecular strategies and shows a modularized approach for assembling-enhanced phosphorescence.

Long-Lived Local Triplet Excited State and Charge Transfer State of 4,4'-Dimethoxy Triphenylamine-BODIPY Compact Electron Donor/Acceptor Dyads

The spin-orbit charge transfer intersystem crossing (SOCT-ISC) and the formation of a long-lived charge transfer (CT) state were studied with a series of 4,4'-dimethoxy triphenylamine-BODIPY compact electron donor/acceptor dyads. Different torsion freedoms were applied in the dyads to tune the electronic coupling between the donor and acceptor, and a red-shifted CT absorption band was observed for one dyad. The dyads show solvent polarity-dependent singlet oxygen photosensitizing ability (quantum yields 3%-79%). Nanosecond transient absorption spectra of the dyad in nonpolar solvent confirm the formation of triplet states. The intrinsic triplet state lifetime is up to 383 μs (in fluid solution), which is much longer than that accessed with the heavy atom effect (276 μs). Intermolecular triplet photosensitizing of the dyads in a polar solvent produces a long-lived ³CT state (lifetime, τ_CT = 8.0 μs supported by the electron spin density surface analysis). The triplet state lifetime of the dyads doped in a Clear Flex 50 polymer film is exceptionally long (7.6-11.4 ms), and formation of a long-lived CT state (37 μs) was observed. Triplet-triplet annihilation upconversion was performed with the electron donor/acceptor dyads used as the triplet photosensitizer and perylene used as the triplet acceptor; the upconversion quantum yield is up to 15.8%.

A Time-Resolved Spectroscopic Investigation of a Novel BODIPY Copolymer and Its Potential Use as a Photosensitiser for Hydrogen Evolution

A novel 4,4-difuoro-4-bora-3a,4a-diaza-s-indacene (BODIPY) copolymer with diethynylbenzene has been synthesised, and its ability to act as a photosensitiser for the photocatalytic generation of hydrogen was investigated by time-resolved spectroscopic techniques spanning the ps- to ns-timescales. Both transient absorption and time-resolved infrared spectroscopy were used to probe the excited state dynamics of this photosensitising unit in a variety of solvents. These studies indicated how environmental factors can influence the photophysics of the BODIPY polymer. A homogeneous photocatalytic hydrogen evolution system has been developed using the BODIPY copolymer and cobaloxime which provides hydrogen evolution rates of 319 μmol h⁻¹ g⁻¹ after 24 h of visible irradiation.

Tunable lifetimes and efficiencies of room temperature phosphorescent liquids by modulating the length and number of alkyl chains

Organic room temperature phosphorescence (RTP) liquid composites exhibit the potential to make innovative changes in large area flexible lighting applications, and it is extremely challenging to achieve high-efficiency RTP in pure organic solvent-free liquid systems. The excited state properties and inner lighting mechanisms of these composites are unclear; therefore, a theoretical perspective to design high efficiency RTP liquids with tunable lifetime is highly desired. Herein, we systematically investigate the photophysical properties of a series of long swallow-tailed bromonaphthalimide (BT unit) molecules by the newly proposed optimally tuned range-separated (RS) functional method, and a state-of-the-art RTP molecule with an absolute quantum yield (ΦRTP) of 57.1% and a lifetime (τ) of 160 ms in solvent-free liquid is obtained. Moreover, theoretical results show that the energy gap between the lowest singlet excited state (S1) and triplet excited state (T1) can be reduced and the non-radiative energy consumption process can be restricted by modulating the length and number of alkyl chains in organic RTP molecules. Thus, a wise molecular design strategy is proposed and five additional efficient RTP molecules with tunable lifetimes (43, 19, 136, 0.11 and 0.005 ms) and efficiencies (11.3%, 6.8%, 5.9%, 0.2% and 0.05%) are theoretically proposed. This study sheds light on the relationship among molecular structure, lifetime and efficiency, and can provide an important prototype to explore high-efficiency RTP by pure organic solvent-free liquid systems.