Transient supramolecular assembly of a functional perylene diimide controlled by a programmable pH cycle

Methylene glycol-sulfite pH-clocks for the time-programming of soft materials: advantages, limitations, and yet unexplored opportunities

Coupling nonlinear reaction networks with soft matter building blocks holds great potential for the design of life-mimicking, time-programmable dissipative self-assembly systems. In this regard, clock reactions are especially useful triggers since they allow to autonomously generate in situ chemical stimuli such as pH changes. The methylene glycol-sulfite (MGS) is a well-known acid-to-base pH-clock reaction which is able to produce sharp and intense pH jumps (up to 5 pH units) after a reliable, yet relatively short (tens of seconds rather than minutes), induction time. Here, after an introductory discussion on the main chemical aspects of MGS and MGS-based systems, their applications for the time-programming of soft matter will be showcased - from micelles, vesicles, and droplets to supramolecular aggregates, polymers and gels. Hopefully, this will help attracting more attention and foster research on the broader field of materials programming with chemical reaction networks.

Time-domain Tollens reaction: synthesising silver nanoparticles with the formaldehyde clock

The addition of silver(i) ions to the methylene glycol-sulphite (MGS) clock reaction results in the sudden formation of metallic silver nanoparticles. Stable suspensions are obtained in the presence of poly(vinylpyrrolidone). The time delay before the appearance of the particles, as well as their size, decreases with the initial methylene glycol concentration while their monodispersity increases.

Formation of Iron (Hydr)Oxide Nanoparticles with a pH-Clock

We demonstrate the autonomous synthesis of iron (hydr)oxide (green rust, magnetite, and lepidocrocite) nanoparticles by precipitating iron(II) ions using hydroxide ions generated in situ with the methylene glycol-sulfite (MGS) reaction, a pH-clock. We show that the nature of the products can be predetermined by tuning the initial iron(II) concentration.

Concepts and principles of self-n-doping in perylene diimide chromophores for applications in biochemistry, energy harvesting, energy storage, and catalysis

Self-doping is an essential method of increasing carrier concentrations in organic electronics that eliminates the need to tailor host-dopant miscibility, a necessary step when employing molecular dopants. Self-n-doping can be accomplished using amines or ammonium counterions as an electron source, which are being incorporated into an ever-increasingly diverse range of organic materials spanning many applications. Self-n-doped materials have demonstrated exemplary and, in many cases, benchmark performances in a variety of applications. However, an in-depth review of the method is lacking. Perylene diimide (PDI) chromophores are an important mainstay in the semiconductor literature with well-known structure-function characteristics and are also one of the most widely utilized scaffolds for self-n-doping. In this review, we describe the unique properties of self-n-doped PDIs, delineate structure-function relationships, and discuss self-n-doped PDI performance in a range of applications. In particular, the impact of amine/ammonium incorporation into the PDI scaffold on doping efficiency is reviewed with regard to attachment mode, tether distance, counterion selection, and steric encumbrance. Self-n-doped PDIs are a unique set of PDI structural derivatives whose properties are amenable to a broad range of applications such as biochemistry, solar energy conversion, thermoelectric modules, batteries, and photocatalysis. Finally, we discuss challenges and the future outlook of self-n-doping principles.

Insights into Chemically Fueled Supramolecular Polymers

Supramolecular polymerization can be controlled in space and time by chemical fuels. A nonassembled monomer is activated by the fuel and subsequently self-assembles into a polymer. Deactivation of the molecule either in solution or inside the polymer leads to disassembly. Whereas biology has already mastered this approach, fully artificial examples have only appeared in the past decade. Here, we map the available literature examples into four distinct regimes depending on their activation/deactivation rates and the equivalents of deactivating fuel. We present increasingly complex mathematical models, first considering only the chemical activation/deactivation rates (i.e., transient activation) and later including the full details of the isodesmic or cooperative supramolecular processes (i.e., transient self-assembly). We finish by showing that sustained oscillations are possible in chemically fueled cooperative supramolecular polymerization and provide mechanistic insights. We hope our models encourage the quantification of activation, deactivation, assembly, and disassembly kinetics in future studies.

Application of a chemical clock in material design: chemically programmed synthesis of zeolitic imidazole framework-8

Here we show a time-programmed and autonomous synthesis of zeolitic imidazole framework-8 (ZIF-8) using a methylene glycol-sulfite clock reaction. The induction period of the driving clock reaction, thus, the appearance of the ZIF-8 can be adjusted by the initial concentration of one reagent of the chemical clock. The autonomously synthesized ZIF-8 showed excellent morphology and crystallinity.

Iodine clocks: applications and untapped opportunities in materials science

Iodine clocks are fascinating nonlinear chemical systems with a glorious past and a promising future. The dynamic removal of iodine from these systems by different means can have important consequences for their reaction dynamics, and could be exploited for time-controlled autonomous dissipative self-assembly. Here, the untapped opportunities offered by iodine clocks for materials science, especially for the time-programming of supramolecular assembly and sol–gel transition, are reviewed and discussed with the hope of arousing the interest on the subject and stimulating new research directions.

Dissolution of Zinc Oxide Nanoparticles in the Presence of Slow Acid Generators

We describe a preliminary investigation of the dissolution dynamics of zinc oxide nanoparticles in the presence of cyclic esters (δ-gluconolactone and propanesultone) as slow acid generators. The particles dissolution is monitored by means of turbidimetry and correlated with the evolution of pH over time. The results could be of interest for the design of chemically programmable colloidal systems.

Design and Control of Perylene Supramolecular Polymers through Imide Substitutions

The number and type of new supramolecular polymer (SMP) systems have increased rapidly in recent years. Some of the key challenges faced for these novel systems include gaining full control over the mode of self-assembly, the creation of novel architectures and exploring functionality. Here, we provide a critical overview of approaches related to perylene-based SMPs and discuss progress to exert control over these potentially important SMPs through chemical modification of the imide substituents. Imide substitutions affect self-assembly behaviour orthogonally to the intrinsic optoelectronic properties of the perylene core, making for a valuable approach to tune SMP properties. Several recent approaches are therefore highlighted, with a focus on controlling 1) morphology, 2) H- or J- aggregation, and 3) mechanism of growth and degree of aggregation using thermodynamic and kinetic control. Areas of potential future exploration and application of these functional SMPs are also explored.

Spinodal decomposition of chemically fueled polymer solutions

Out-of-equilibrium phase transitions driven by dissipation of chemical energy are a common mechanism for morphological organization and temporal programming in biology. Inspired by this, dissipative self-assembly utilizes chemical reaction networks (CRNs) that consume high-energy molecules (chemical fuels) to generate transient structures and functionality. While a wide range of chemical fuels and building blocks are now available for chemically fueled systems, so far little attention has been paid to the phase-separation process itself. Herein, we investigate the chemically fueled spinodal decomposition of poly(norbornene dicarboxylic acid) (PNDAc) solution, which is driven by a cyclic chemical reaction network. Our analysis encompasses both the molecular level in terms of the CRN, but also the phase separation process. We investigate the morphology of formed domains, as well as the kinetics and mechanism of domain growth, and develop a kinetic/thermodynamic hybrid model to not only rationalize the dependence of the system on fuel concentration and pH, but also open pathways towards predictive design of future fueled polymer systems.

Parasitic behavior in competing chemically fueled reaction cycles

Non-equilibrium, fuel-driven reaction cycles serve as model systems of the intricate reaction networks of life. Rich and dynamic behavior is observed when reaction cycles regulate assembly processes, such as phase separation. However, it remains unclear how the interplay between multiple reaction cycles affects the success of emergent assemblies. To tackle this question, we created a library of molecules that compete for a common fuel that transiently activates products. Often, the competition for fuel implies that a competitor decreases the lifetime of these products. However, in cases where the transient competitor product can phase-separate, such a competitor can increase the survival time of one product. Moreover, in the presence of oscillatory fueling, the same mechanism reduces variations in the product concentration while the concentration variations of the competitor product are enhanced. Like a parasite, the product benefits from the protection of the host against deactivation and increases its robustness against fuel variations at the expense of the robustness of the host. Such a parasitic behavior in multiple fuel-driven reaction cycles represents a lifelike trait, paving the way for the bottom-up design of synthetic life.

Supramolecular gelation controlled by an iodine clock

Programming supramolecular assembly in the time domain is a fundamental aspect of the design of biomimetic materials. We achieved the time-controlled sol-gel transition of a poly(vinyl alcohol)-iodine supramolecular complex by generating iodine in situ with a clock reaction. We demonstrate that both the gelation time and the mechanical properties of the resulting hydrogel can be tuned by properly selecting the clock parameters or through competitive iodine complexation.

Oscillating Reactions Meet Polymers at Interfaces

Chemo-mechanical phenomena, including oscillations and peristaltic motions, are widespread in nature-just think of heartbeats-thanks to the ability of living organisms to convert directly chemical energy into mechanical work. Their imitation with artificial systems is still an open challenge. Chemical clocks and oscillators (such as the popular Belousov-Zhabotinsky (BZ) reaction) are reaction networks characterized by the emergence of peculiar spatiotemporal dynamics. Their application to polymers at interfaces (grafted chains, layer-by-layer assemblies, and polymer brushes) offers great opportunities for developing novel smart biomimetic materials. Despite the wide field of potential applications, limited research has been carried out so far. Here, we aim to showcase the state-of-the-art of this fascinating field of investigation, highlighting the potential for future developments and providing a personal outlook.