Chemical antifouling strategies in sensors for food analysis: A review

Surface biofouling induced by the undesired nonspecific adsorption of foulants (e.g., coexisting proteins and cells) in food matrices is a major issue of sensors for food analysis, hindering their reliability and accuracy of sensing. This issue can be addressed by developing antifouling strategies to prevent or alleviate nonspecific binding. Chemical antifouling strategies involve the use of chemical modifiers (i.e., antifouling materials) to strongly hydrate the surface and reduce surface biofouling. Through appropriate immobilization approaches, antifouling materials can be tethered onto sensors to form antifouling surfaces with well-ordered structures, balanced surface charges, and appropriate surface density and thickness. A rational antifouling surface can reduce the matrix effect, simplify sample pretreatment, and improve analytical performance. This review summarizes recent developments in chemical antifouling strategies in sensing. Surface antifouling mechanisms and common antifouling materials are described, and factors that may influence the antifouling effects of antifouling surfaces and approaches incorporating antifouling materials onto sensing surfaces are highlighted. Moreover, the specific applications of antifouling sensors in food analysis are introduced. Finally, we provide an outlook on future developments in antifouling sensors for food analysis.

Antifouling Gold-Inlaid BSA Coating for the Highly Efficient Capture of Circulating Tumor Cells

Large amounts of coexisting contamination in complex biofluid samples impede the quantified veracity of biomarkers, which is the key problem for disease confirmation. Herein, amyloid-like transformed bovine serum albumin inlaid with gold nanoparticles was used as a coating (BGC) on a substrate composed of silicon nanowires (SW; BGC-SW) under ambient conditions. After modification with the recognition group, BGC-SW could serve as an outstanding platform for the selective separation and sensitive detection of biomarkers in complicated biosamples. First, the BGC on SW with a large surface area exhibits excellent adhesion resistance. The attached amounts of contaminations in biofluids were decreased by over 78% compared with native bovine serum albumin (BSA) as the blocking agent. This is because the phase-transformed BSA coating provides stronger interactions with the SW than bare BSA, which results in a tighter attachment and more uniform coverage of the BGC. Furthermore, the gold matrix laid inside the antiadhesive coating ensures simple cross-linking with the recognition groups to selectively capture various biomarkers in complex biofluids and create a gentle release method. Circulating tumor cells (CTCs) were chosen as template biomarkers to verify the application of A-BGC-SW (BGC-SW modified with sgc8-aptamer) in various separation processes of untreated biofluids. The results showed that approximately six cells could be captured from a 1 mL fresh blood sample containing only 10 CTCs. The easy fabrication and excellent antiadhesion property endow A-BGC-SW with great potential in the field of biological separation.

C18-functionalized magnetic nanocomposites fabricated by one-step aqueous coating of tailored oligopeptides for enrichment of low-abundance peptides

Screening and monitoring endogenous peptides from complicated biosamples is still a major challenge in mass spectrometry-based proteomics research, mainly due to their low concentration and the interference of high-abundance proteins and other contaminants in biological samples. Herein, a facile and novel approach was described for rapid fabrication of C₁₈-functionalized magnetic nanocomposites (C₁₈-MNCs) based on one-step aqueous coating of C₁₈-Val-Lys-Val-Lys-Val-Lys (C₁₈-VK-VI) for the highly selective enrichment of low-abundance endogenous peptides from biological samples. C₁₈-VK-VI can readily self-assemble into complete monolayers mainly composed of β-sheets with C₁₈ hydrophobic chains erecting on the surface of GO@Fe₃O₄ MNCs under the physiological conditions. The resulting C₁₈VK-VI-GO@Fe₃O₄ MNCs exhibited good performance for peptides enrichment from digests of standard protein (myoglobin, MYO) and human serum, such as high sensitivity (0.05 fmol μL^-1) and selectivity (mass ratio of MYO digests and MYO = 1:500), rapid separation, and good reproducibility. Such a simple mild and rapid one-step aqueous coating method on the basis of oligopeptides self-assembly showed great potential in surface functionalization of various nanoadsorbents for proteome/peptidome researches.

Designed Three-in-One Peptides with Anchoring, Antifouling, and Recognizing Capabilities for Highly Sensitive and Low-Fouling Electrochemical Sensing in Complex Biological Media

Nonspecific adsorption is of great concern for electrochemical biosensors performing in complex biological media, and various antifouling materials have been introduced into the sensing interfaces to improve the antifouling capability of different biosensors. However, for most of the biosensors with antifouling materials and sensing probes coexisting in the sensing interfaces, either the antifouling materials will impair the sensing performances or the sensing probes will affect the antifouling ability. Herein, a facile and efficient antifouling biosensor was developed based on a newly designed three-in-one peptide with anchoring, antifouling, and recognizing capabilities. One end of the designed peptide is a unique anchoring part that is rich in amine groups, and this part can be anchored to the poly(3,4-ethylenedioxythiophene) (PEDOT)-citrate film electrodeposited on a glassy carbon electrode. The other end of the peptide is a recognizing part that can specifically bind to the aminopeptidase N (APN) and human hepatocellular carcinoma cells (HepG2 cells). Meanwhile, the middle part of the peptide, together with the anchoring part, was designed to be antifouling. With this designed multifunctional peptide, highly sensitive and low-fouling biosensors capable of assaying target APN and HepG2 cells in complex biological media can be easily prepared, with detection limits of 0.4 ng·mL^-1 and 20 cells·mL^-1, respectively. This antifouling biosensor is feasible for practical target detection in real complex samples, and it is highly expected that this peptide designing strategy may be extended to the development of various antifouling biosensors.

One-step fabrication of bifunctional self-assembled oligopeptides anchored magnetic carbon nanoparticles and their application in copper (II) ions removal from aqueous solutions

Copper ion (Cu (II)) pollution has attracted much attention due to its remarkable toxic domino effect at excess amount. Efficient Cu (II) ions removal is thus a prerequisite for wastewater recycling. Herein, we present a facile and environmentally benign strategy to fabricate thiol (SH)-functionalized Fe₃O₄@C nanoparticles (denoted as Fe₃O₄@C-SH NPs) based on one-step self-assembling of a bifunctional oligopeptide with a sequence of Cys-Lys-Cys-Lys-Cys-Lys (CK-VI) for highly efficient removal of copper ions (Cu (II)) in aqueous solutions. Under the physiological conditions, CK-VI readily self-organized into a robust and tailor-made functional monolayer predominately composed of well-packed β-sheets on the surface of Fe₃O₄@C NPs with their thiol groups standing on the outermost layer. The resulting Fe₃O₄@C-SH NPs containing abundant thiol active sites exhibited excellent adsorption capacity (up to 28.8 mg g^-1) and selectivity for Cu (II) ions over coexisting ions. Compared with other covalent grafting methods with multistep processes and in harsh conditions, the proposed oligopeptides assembly-based coating method makes it possible to rapidly fabricate the Fe₃O₄@C-SH NPs in a simple mild one-step aqueous process with low cost. The current study provides facile and environmentally friendly approaches to rapidly tailor multifunctional surfaces of NPs for various toxic metal ions removal from wastewater.

Photoelectrochemical biosensor for CEA detection based on SnS2-GR with multiple quenching effects of Au@CuS-GR

A novel signal on-off type photoelectrochemical (PEC) biosensing system was designed for sensitive detection of carcinoembryonic antigen (CEA) based on tin disulfide nanosheets loaded on reduced graphene cxide (SnS₂-GR) as the photoactive material and gold nanoparticles coated on reduced graphene oxide-functionalized copper sulfide (Au@CuS-GR) for signal amplification. It's the first time for SnS₂-GR was exploited as a sensing matrix. Here, the photocurrent signals of SnS₂ were amplified attributed to the sensitization effect of graphene. As signal amplifier, Au@CuS-GR could quench the photocurrents of SnS₂-GR not only through the p-n type semiconductor quenching effect as well as the steric hindrance effect, but also as peroxidase mimetics to catalyze the oxidation of 4-Chloro-1-naphthol (4-CN) to produce insoluble product on the electrode surface. Based on the multiple signal amplification ability of Au@CuS-GR, CEA was detected sensitively with a linear range from 0.1 pg mL^-1 to 10 ng mL^-1 and limit of detection down to 59.9 fg mL^-1 (S/N = 3). Meanwhile, the PEC biosensor displayed excellent performance in the assay of human serum sample, showing good application prospects for various target analysis.