Reusable mechano-bactericidal surface with echinoid-shaped hierarchical micro/nano-structure

Biofilms formed owing to the attachment of bacteria to surfaces have caused various problems in industries such as marine transportation/logistics and medicine. In response, many studies have been conducted on bactericidal surfaces, and nanostructured surfaces mimicking cicada and dragonfly wings are emerging as candidates for mechano-bactericidal surfaces. In specific circumstances involving mechano-bactericidal activity, certain nanostructured surfaces could exhibit their bactericidal effects by directly deforming the membranes of bacteria that adhere to these nanostructures. Additionally, in most cases, debris of bacterial cells may accumulate on these nanostructured surfaces. Such accumulation poses a significant challenge: it diminishes the mechano-bactericidal effectiveness of the surface, as it hinders the direct interaction between the nanostructures and any new bacteria that attach subsequently. In specific circumstances involving mechano-bactericidal activity, certain nanostructured surfaces could exhibit their bactericidal effects by directly deforming the membranes of bacteria that adhere to these nanostructures. Additionally, in most cases, debris of bacterial cells may accumulate on these nanostructured surfaces. Such accumulation poses a significant challenge: it diminishes the mechano-bactericidal effectiveness of the surface, as it hinders the direct interaction between the nanostructures and any new bacteria that attach subsequently.In other words, there is a need for strategies to remove the accumulated bacterial debris in order to sustain the mechano-bactericidal effect of the nanostructured surface. In this study, hierarchical micro/nano-structured surface (echinoid-shaped nanotextures were formed on Al micro-particle's surfaces) was fabricated using a simple pressure-less sintering method, and effective bactericidal efficiency was shown against E. coli (97 ± 3.81%) and S. aureus (80 ± 9.34%). In addition, thermal cleaning at 500 °C effectively eliminated accumulated dead bacterial debris while maintaining the intact Al2O3 nanostructure, resulting in significant mechano-bactericidal activity (E. coli: 89 ± 6.86%, S. aureus: 75 ± 8.31%). As a result, thermal cleaning maintains the intact nanostructure and allows the continuance of the mechano-bactericidal effect. This effect was consistently maintained even after five repetitive use (E. coli: 80 ± 16.26%, S. aureus: 76 ± 12.67%).

A photothermal therapy enhanced mechano-bactericidal hybrid nanostructured surface

Polymeric materials that have been extensively applied in medical devices, wearable electronics, and food packaging are readily contaminated by bothersome pathogenic bacteria. Bioinspired mechano-bactericidal surfaces can deliver lethal rupture for contacted bacterial cells through mechanical stress. However, the mechano-bactericidal activity based only on polymeric nanostructures is not satisfactory, especially for the Gram-positive strain which is generally more resistant to mechanical lysis. Here, we show that the mechanical bactericidal performance of polymeric nanopillars can be significantly enhanced by the combination of photothermal therapy. We fabricated the nanopillars through the combination of low-cost anodized aluminum oxide (AAO) template-assisted method with an environment-friendly Layer-by-Layer (LbL) assembly technique of tannic acid (TA) and iron ion (Fe3+). The fabricated hybrid nanopillar exhibited remarkable bactericidal performances (more than 99%) toward both Gram-negative Pseudomonas aeruginosa (P. aeruginosa) and stubborn Gram-positive Staphylococcus aureus (S. aureus) bacteria. Notably, this hybrid nanostructured surface displayed excellent biocompatibility for murine L929 fibroblast cells, indicating a selective biocidal activity between bacterial cells and mammalian cells. Thus, the concept and antibacterial system described here present a low-cost, scalable, and highly repeatable strategy for the construction of physical bactericidal nanopillars on polymeric films with high performance and biosafety, but without any risks of causing antibacterial resistance.

Gallium Liquid Metal: Nanotoolbox for Antimicrobial Applications

The proliferation of drug resistance in microbial pathogens poses a significant threat to human health. Hence, treatment measures are essential to surmount this growing problem. In this context, liquid metal nanoparticles are promising. Gallium, a post-transition metal notable for being a liquid at physiological temperature, has drawn attention for its distinctive properties, high antimicrobial efficacy, and low toxicity. Moreover, gallium nanoparticles demonstrate anti-inflammatory properties in immune cells. Gallium can alloy with other metals and be prepared in various composites to modify and tailor its characteristics and functionality. More importantly, the bactericidal mechanism of gallium liquid metal could sidestep the threat of emerging drug resistance mechanisms. Building on this rationale, gallium-based liquid metal nanoparticles can enable impactful and innovative strategic pathways in the battle against antimicrobial resistance. This review outlines the characteristics of gallium-based liquid metals at the nanoscale and their corresponding antimicrobial mechanisms to provide a comprehensive yet succinct overview of their current antimicrobial applications. In addition, challenges and opportunities that require further research efforts have been identified and discussed.

Designing Effective Antimicrobial Nanostructured Surfaces: Highlighting the Lack of Consensus in the Literature

Research into nanostructured materials, inspired by the topography of certain insect wings, has provided a potential pathway toward drug-free antibacterial surfaces, which may be vital in the ongoing battle against antimicrobial resistance. However, to produce viable antibacterial nanostructured surfaces, we must first understand the bactericidal mechanism of action and how to optimize them to kill the widest range of microorganisms. This review discusses the parameters of nanostructured surfaces that have been shown to influence their bactericidal efficiency and highlights the highly variable nature of many of the findings. A large-scale analysis of the literature is also presented, which further shows a lack of clarity in what is understood about the factors influencing bactericidal efficiency. The potential reasons for the ambiguity, including how the killing effect may be a result of multiple factors and issues with nonstandardized testing of the antibacterial properties of nanostructured surfaces, are then discussed. Finally, a standard method for testing of antimicrobial killing is proposed that will allow comparison between studies and enable a deeper understanding about nanostructured surfaces and how to optimize their bactericidal efficiency.

Quantitative proteomics reveals reduction in central carbon and energy metabolisms contributes to gentamicin resistance in Staphylococcus aureus

The emergence of antibiotic resistance greatly increases the difficulty of treating bacterial infections. In order to develop effective treatments, the underlying mechanisms of antibiotic resistance must be understood. In this study, Staphylococcus aureus ATCC6538 strain was passaged in medium with and without gentamicin and obtained lab-evolved gentamicin-resistant S. aureus (R_GEN) and gentamicin-sensitive S. aureus (S_GEN) strains, respectively. Data-Independent Acquisition (DIA)-based proteomics approach was applied to compare the two strains. A total of 1426 proteins were identified, of which 462 were significantly different: 126 were upregulated and 336 were downregulated in R_GEN compared to S_GEN. Further analysis found that reduced protein biosynthesis was a characteristic feature in R_GEN, related to metabolic suppression. The most differentially expressed proteins were involved in metabolic pathways. In R_GEN, central carbon metabolism was dysregulated and energy metabolism decreased. After verification, it was found that the levels of NADH, ATP, and reactive oxygen species (ROS) decreased, and superoxide dismutase and catalase activities increased. These findings suggest that inhibition of central carbon and energy metabolic pathways may play an important role in the resistance of S. aureus to gentamicin, and that gentamicin resistance is associated with oxidative stress. Significance: The overuse and misuse of antibiotics have led to bacterial antibiotic resistance, which is a serious threat to human health. Understanding the mechanisms of antibiotic resistance will help better control these antibiotic-resistant pathogens in the future. The present study characterized the differential proteome of gentamicin-resistant Staphylococcus aureus using the most advanced DIA-based proteomics technology. Many of the differential expressed proteins were related to metabolism, specifically, reduced central carbon and energy metabolism. Lower levels of NADH, ROS, and ATP were detected as a consequence of the reduced metabolism. These results reveal that downregulation of protein expression affecting central carbon and energy metabolisms may play an important role in the resistance of S. aureus to gentamicin.

Finite Element Modelling of a Gram-Negative Bacterial Cell and Nanospike Array for Cell Rupture Mechanism Study

Inspired by nature, it is envisaged that a nanorough surface exhibits bactericidal properties by rupturing bacterial cells. In order to study the interaction mechanism between the cell membrane of a bacteria and a nanospike at the contact point, a finite element model was developed using the ABAQUS software package. The model, which saw a quarter of a gram-negative bacteria (Escherichia coli) cell membrane adhered to a 3 × 6 array of nanospikes, was validated by the published results, which show a reasonably good agreement with the model. The stress and strain development in the cell membrane was modeled and were observed to be spatially linear and temporally nonlinear. From the study, it was observed that the bacterial cell wall was deformed around the location of the nanospike tips as full contact was generated. Around the contact point, the principal stress reached above the critical stress leading to a creep deformation that is expected to cause cell rupture by penetrating the nanospike, and the mechanism is envisaged to be somewhat similar to that of a paper punching machine. The obtained results in this project can provide an insight on how bacterial cells of a specific species are deformed when they adhere to nanospikes, and how it is ruptured using this mechanism.

Mechanobactericidal, Gold Nanostar Hydrogel-Based Bandage for Bacteria-Infected Skin Wound Healing

The emergence of multidrug resistant (MDR) microorganisms has led to the development of alternative approaches for providing relief from microbial attacks. The mechano-bactericidal action as a substitute for antimicrobials has become the focus of intensive research. In this work, nanostructure-conjugated hydrogel are explored as a flexible dressing against Staphylococcus aureus (S. aureus)-infected skin wounds. Herein gold nanostars (AuNst) with spike lengths reaching 120 nm are probed for antibacterial action. The bacterial killing of >95% is observed for Pseudomonas aeruginosa (P. aeruginosa) and Escherichia coli (E. coli), while up to 60% for Gram-positive S. aureus. AuNst conjugated hydrogel (AuNst₁₂₀@H) reduced >80% colonies of P. aeruginosa and E. coli. In comparison, around 35.4% reduction of colonies are obtained for S. aureus. The viability assay confirmed the presence of about 85% of living NIH-3T3 cells when grown with hydrogels. An animal wound model is also developed to assess the efficiency of AuNst₁₂₀@H. A significant reduction in wound size is observed on the 10th day in AuNst₁₂₀@H treated animals with fully formed epidermal layers, hair follicles, new blood vessels, and arrector muscles. These findings suggest that novel dressing materials can be developed with antimicrobial nanotextured surfaces.

Investigating forthcoming strategies to tackle deadly superbugs: current status and future vision

INTRODUCTION

Superbugs are microorganisms that cause disease and have increased resistance to the treatments typically used against infections. Recently, antibiotic resistance development has been more rapid than the pace at which antibiotics are manufactured, leading to refractory infections of pathogenic bacteria. Scientists are concerned that a particularly virulent and lethal "superbug" will one day join the ranks of existing bacteria that cause incurable diseases, resulting in a global health disaster on the scale of the Black Death.

AREAS COVERED

Therefore, this study highlights the current developments in the management of antibiotic-resistant bacteria and recommends strategies for further regulating antibiotic-resistant microorganisms associated with the healthcare system. This review also addresses the origins, prevalence, and pathogenicity of superbugs, and the design of antibacterial against these growing multidrug-resistant organisms from a medical perspective.

EXPERT OPINION

It is recommended that antimicrobial resistance (AMR) should be addressed by limiting human-to-human transmission of resistant strains, lowering the use of broad-spectrum antibiotics, and developing novel antimicrobials. Using the risk-factor domains framework from this study would assure that not only clinical but also community and hospital-specific factors are covered, lowering the chance of confounders. Extensive subjective research is necessary to fully understand the underlying factors and uncover previously unexplored areas.

Dual-action silver functionalized nanostructured titanium against drug resistant bacterial and fungal species

HYPOTHESIS

Titanium and its alloys are commonly used implant materials. Once inserted into the body, the interface of the biomaterials is the most likely site for the development of implant-associated infections. Imparting the titanium substrate with high-aspect-ratio nanostructures, which can be uniformly achieved using hydrothermal etching, enables a mechanical contact-killing (mechanoresponsive) mechanism of bacterial and fungal cells. Interaction between cells and the surface shows cellular inactivation via a physical mechanism meaning that careful engineering of the interface is needed to optimse the technology. This mechanism of action is only effective towards surface adsorbed microbes, thus any cells not directly in contact with the substrate will survive and limit the antimicrobial efficacy of the titanium nanostructures. Therefore, we propose that a dual-action mechanoresponsive and chemical-surface approach must be utilised to improve antimicrobial activity. The addition of antimicrobial silver nanoparticles will provide a secondary, chemical mechanism to escalate the microbial response in tandem with the physical puncture of the cells.

EXPERIMENTS

Hydrothermal etching is used as a facile method to impart variant nanostrucutres on the titanium substrate to increase the antimicrobial response. Increasing concentrations (0.25 M, 0.50 M, 1.0 M, 2.0 M) of sodium hydroxide etching solution were used to provide differing degrees of nanostructured morphology on the surface after 3 h of heating at 150 °C. This produced titanium nanospikes, nanoblades, and nanowires, respectively, as a function of etchant concentration. These substrates then provided an interface for the deposition of silver nanoparticles via a reduction pathway. Methicillin-resistant Staphylococcous aureus (MRSA) and Candida auris (C. auris) were used as model bacteria and fungi, respectively, to test the effectiveness of the nanostructured titanium with and without silver nanoparticles, and the bio-interactions at the interface.

FINDINGS

The presence of nanostructure increased the bactericidal response of titanium against MRSA from ∼ 10 % on commercially pure titanium to a maximum of ∼ 60 % and increased the fungicidal response from ∼ 10 % to ∼ 70 % in C. auris. Introducing silver nanoparticles increased the microbiocidal response to ∼ 99 % towards both bacteria and fungi. Importantly, this study highlights that nanostructure alone is not sufficient to develop a highly antimicrobial titanium substrate. A dual-action, physical and chemical antimicrobial approach is better suited to produce highly effective antibacterial and antifungal surface technologies.

Bioinspired nanopillar surface for switchable mechano-bactericidal and releasing actions

Constructing safe and effective antibacterial surfaces has continuously received great attention, especially in healthcare-related fields. Bioinspired mechano-bactericidal nanostructure surfaces could serve as a promising strategy to reduce surface bacterial contamination while avoiding the development of antibiotic resistance. Although effective, these nanostructure surfaces are prone to be contaminated by the accumulation of dead bacteria, inevitably compromising their long-term antibacterial activity. Herein, a bioinspired nanopillar surface with both mechano-bactericidal and releasing actions is developed, via grafting zwitterionic polymer (poly(sulfobetaine methacrylate) (PSBMA)) on ZnO nanopillars. Under dry conditions, this nanopillar surface displays remarkable mechano-bactericidal activity, because the collapsed zwitterionic polymer layer makes no essential influence on nanopillar structure. Once being incubated with aqueous solution, the surface could readily detach the killed bacteria and debris, owing to the swelling of the zwitterionic layer. Consequentially, the surface antibacterial performances can be rapidly and controllably switched between mechano-bactericidal action and bacteria-releasing activity, guaranteeing a long-lasting antibacterial performance. Notably, these collaborative antibacterial behaviors are solely based on physical actions, avoiding the risk of triggering bacteria resistance. The resultant nanopillar surface also enjoys the advantages of substrate-independency and good biocompatibility, offering potential antibacterial applications for biomedical devices and hospital surfaces.

Thermoresponsive Nanostructures: From Mechano-Bactericidal Action to Bacteria Release

Overuse of antibiotics can increase the risk of notorious antibiotic resistance in bacteria, which has become a growing public health concern worldwide. Featured with the merit of mechanical rupture of bacterial cells, the bioinspired nanopillars are promising alternatives to antibiotics for combating bacterial infections while avoiding antibacterial resistance. However, the resident dead bacterial cells on nanopillars may greatly impair their bactericidal capability and ultimately impede their translational potential toward long-term applications. Here, we show that the functions of bactericidal nanopillars can be significantly broadened by developing a hybrid thermoresponsive polymer@nanopillar-structured surface, which retains all of the attributes of pristine nanopillars and adds one more: releasing dead bacteria. We fabricate this surface through coaxially decorating mechano-bactericidal ZnO nanopillars with thermoresponsive poly(N-isopropylacrylamide) (PNIPAAm) brushes. Combining the benefits of ZnO nanopillars and PNIPAAm chains, the antibacterial performances can be controllably regulated between ultrarobust mechano-bactericidal action (∼99%) and remarkable bacteria-releasing efficiency (∼98%). Notably, both the mechanical sterilization against the live bacteria and the controllable release for the pinned dead bacteria solely stem from physical actions, stimulating the exploration of intelligent structure-based bactericidal surfaces with persistent antibacterial properties without the risk of triggering drug resistance.

Evaluation of the ZnO Nanopillar Surface for Disinfection Applications

Much attention has been devoted to the synthesis and antimicrobial studies of nanopatterned surfaces. However, factors contributing to their potential and eventual application, such as large-scale synthesis, material durability, and biocompatibility, are often neglected in such studies. In this paper, the ZnO nanopillar surface is found to be amenable to synthesis in large forms and stable upon exposure to highly accelerated lifetime tests (HALT) without any detrimental effect on its antimicrobial activity. Additionally, the material is effective against clinically isolated pathogens and biocompatible in vivo. These findings illustrate the broad applicability of ZnO nanopillar surfaces in the common equipment used in health-care and consumer industries.

Aqueous mechano-bactericidal action of acicular aragonite crystals

Nanoneedle structures on dragonfly and cicada wing surfaces or black silicon nanoneedles demonstrate antibacterial phenomena, namely mechano-bactericidal action. These air-exposed, mechano-bactericidal surfaces serve to destroy adherent bacteria, but their bactericidal action in the water is no precedent to report. Calcium carbonate easily accumulates on solid surfaces during long-term exposure to hard water. We expect that aragonite nanoneedles, in particular, which grow on TiO2 during the photocatalytic treatment of calcium-rich groundwater, exhibit mechano-bactericidal action against bacteria in water. Here, we showed that acicular aragonite modified on TiO2 ceramics prepared from calcium bicarbonate in mineral water by photocatalysis exhibits mechanical bactericidal activity against E. coli in water. Unmodified, calcite-modified and aragonite-modified TiO2 ceramics were exposed to water containing E. coli (in a petri dish), and their bactericidal action over time was investigated under static and agitated conditions. The surfaces of the materials were observed by scanning electron microscopy, and the live/dead bacterial cells were observed by confocal laser scanning microscopy. As a result, the synergistic bactericidal performance achieved by mechano-bactericidal action and photocatalysis was demonstrated. Aragonite itself has a high biological affinity for the human body different from the other whisker-sharpen nanomaterials, therefore, the mechano-bactericidal action of acicular aragonite in water is expected to inform the development of safe water purification systems for use in developing countries.

Nanostructured Copper Surface Kills ESKAPE Pathogens and Viruses in Minutes

In the search for a fast contact-killing antimicrobial surface to break the transmission pathway of lethal pathogens, nanostructured copper surfaces were found to exhibit the desired antimicrobial properties. Compared with plain copper, these nanostructured copper surfaces with Cu(OH)₂ nano-sword or CuO nano-foam were found to completely eliminate pathogens at a fast rate, including clinically isolated drug resistant species. Additionally these nanostructured copper surfaces demonstrated potential antiviral properties when assessed against bacteriophages, as a viral surrogate, and murine hepatitis virus, a surrogate for SARS-CoV-2. The multiple modes of killing, physical killing and copper ion mediated killing contribute to the superior and fast kinetics of antimicrobial action against common microbes, and ESKAPE pathogens. Prototypes for air and water cleaning with current nanostructured copper surface have also been demonstrated.

Advancing of titanium medical implants by surface engineering: recent progress and challenges

Introduction:Titanium (Ti) and their alloys are used as main implant materials in orthopedics and dentistry for decades having superior mechanical properties, chemical stability and biocompatibility. Their rejections due lack of biointegration and bacterial infection are concerning with considerable healthcare costs and impacts on patients. To address these limitations, conventional Ti implants need improvements where the use of surface nanoengineering approaches and the development of a new generation of implants are recognized as promising strategies.Areas covered:This review presents an overview of recent progress on the application of surface engineering methods to advance Ti implants enable to address their key limitations. Several promising surface engineering strategies are presented and critically discussed to generate advanced surface properties and nano-topographies (tubular, porous, pillars) able not only to improve their biointegration, antibacterial performances, but also to provide multiple functions such as drug delivery, therapy, sensing, communication and health monitoring underpinning the development of new generation and smart medical implants.Expert opinion:Recent advances in cell biology, materials science, nanotechnology and additive manufacturing has progressively influencing improvements of conventional Ti implants toward the development of the next generation of implants with improved performances and multifunctionality. Current research and development are in early stage, but progressing with promising results and examples of moving into in-vivo studies an translation into real applications.

Anti-Periprosthetic Infection Strategies: From Implant Surface Topographical Engineering to Smart Drug-Releasing Coatings

Despite advanced implant sterilization and aseptic surgical techniques, periprosthetic bacterial infection remains a major challenge for orthopedic and dental implants. Bacterial colonization/biofilm formation around implants and their invasion into the dense skeletal tissue matrices are difficult to treat and could lead to implant failure and osteomyelitis. These complications require major revision surgeries and extended antibiotic therapies that are associated with high treatment cost, morbidity, and even mortality. Effective preventative measures mitigating risks for implant-related infections are thus in dire need. This review focuses on recent developments of anti-periprosthetic infection strategies aimed at either reducing bacterial adhesion, colonization, and biofilm formation or killing bacteria directly in contact with and/or in the vicinity of implants. These goals are accomplished through antifouling, quorum-sensing interfering, or bactericidal implant surface topographical engineering or surface coatings through chemical modifications. Surface topographical engineering of lotus leaf mimicking super-hydrophobic antifouling features and cicada wing-mimicking, bacterium-piercing nanopillars are both presented. Conventional physical coating/passive release of bactericidal agents is contrasted with their covalent tethering to implant surfaces through either stable linkages or linkages labile to bacterial enzyme cleavage or environmental perturbations. Pros and cons of these emerging anti-periprosthetic infection approaches are discussed in terms of their safety, efficacy, and translational potentials.

Towards antiviral polymer composites to combat COVID-19 transmission

Polymer matrix composite materials have the capacity to aid the indirect transmission of viral diseases. Published research shows that respiratory viruses, including severe acute respiratory syndrome coronavirus 2 (SARS‐CoV‐2 or COVID‐19), can attach to polymer substrata as a result of being contacted by airborne droplets resulting from infected people sneezing or coughing in close proximity. Polymer matrix composites are used to produce a wide range of products that are “high‐touch” surfaces, such as sporting goods, laptop computers and household fittings, and these surfaces can be readily contaminated by pathogens. This article reviews published research on the retention of SARS‐CoV‐2 and other virus types on plastics. The factors controlling the viral retention time on plastic surfaces are examined and the implications for viral retention on polymer composite materials are discussed. Potential strategies that can be used to impart antiviral properties to polymer composite surfaces are evaluated. These strategies include modification of the surface composition with biocidal agents (e.g., antiviral polymers and nanoparticles) and surface nanotexturing. The potential application of these surface modification strategies in the creation of antiviral polymer composite surfaces is discussed, which opens up an exciting new field of research for composite materials.

Antibacterial biomaterials in bone tissue engineering

Bone infection is a devastating disease characterized by recurrence, drug-resistance, and high morbidity, that has prompted clinicians and scientists to develop novel approaches to combat it. Currently, although numerous biomaterials that possess excellent biocompatibility, biodegradability, porosity, and mechanical strength have been developed, their lack of effective antibacterial ability substantially limits bone-defect treatment efficacy. There is, accordingly, a pressing need to design antibacterial biomaterials for effective bone-infection prevention and treatment. This review focuses on antibacterial biomaterials and strategies; it presents recently reported biomaterials, including antibacterial implants, antibacterial scaffolds, antibacterial hydrogels, and antibacterial bone cement types, and aims to provide an overview of these antibacterial materials for application in biomedicine. The antibacterial mechanisms of these materials are discussed as well.

Implication of Surface Properties, Bacterial Motility, and Hydrodynamic Conditions on Bacterial Surface Sensing and Their Initial Adhesion

Biofilms are structured microbial communities attached to surfaces, which play a significant role in the persistence of biofoulings in both medical and industrial settings. Bacteria in biofilms are mostly embedded in a complex matrix comprised of extracellular polymeric substances that provide mechanical stability and protection against environmental adversities. Once the biofilm is matured, it becomes extremely difficult to kill bacteria or mechanically remove biofilms from solid surfaces. Therefore, interrupting the bacterial surface sensing mechanism and subsequent initial binding process of bacteria to surfaces is essential to effectively prevent biofilm-associated problems. Noting that the process of bacterial adhesion is influenced by many factors, including material surface properties, this review summarizes recent works dedicated to understanding the influences of surface charge, surface wettability, roughness, topography, stiffness, and combination of properties on bacterial adhesion. This review also highlights other factors that are often neglected in bacterial adhesion studies such as bacterial motility and the effect of hydrodynamic flow. Lastly, the present review features recent innovations in nanotechnology-based antifouling systems to engineer new concepts of antibiofilm surfaces.

Advancing of Additive-Manufactured Titanium Implants with Bioinspired Micro- to Nanotopographies

There is an increasing demand for low-cost and more efficient titanium (Ti) medical implants that will provide improved osseointegration and at the same time reduce the likelihood of infection. In the past decade, additive manufacturing (AM) using metal selective laser melting (SLM) or three-dimensional (3D) printing techniques has emerged to enable novel implant geometries or properties to overcome such potential challenges. This study presents a new surface engineering approach to create bioinspired multistructured surfaces on SLM-printed Ti alloy (Ti6Al4V) implants by combining SLM technology, electrochemical anodization, and hydrothermal (HT) processes. The resulting implants display unique surfaces with a distinctive dual micro- to nano-topography composed of micron-sized spherical features, fabricated by SLM and vertically aligned nanoscale pillar structures as a result of combining anodization and HT treatment. The fabricated implants enhanced hydroxyapatite-like mineral deposition from simulated body fluid (SBF) compared to control. In addition, normal human osteoblast-like cells (NHBCs) showed strong adhesion to the nano-/microstructures and displayed greater propensity to mineralize compared to control surfaces. This engineering approach and the resulting nature-inspired multiscale-structured surface offers desired features for improving osseointegration and antibacterial performance toward the development of next-generation orthopedic and dental implants.

Antibacterial Action of Nanoparticles by Lethal Stretching of Bacterial Cell Membranes

It is commonly accepted that nanoparticles (NPs) can kill bacteria; however, the mechanism of antimicrobial action remains obscure for large NPs that cannot translocate the bacterial cell wall. It is demonstrated that the increase in membrane tension caused by the adsorption of NPs is responsible for mechanical deformation, leading to cell rupture and death. A biophysical model of the NP-membrane interactions is presented which suggests that adsorbed NPs cause membrane stretching and squeezing. This general phenomenon is demonstrated experimentally using both model membranes and Pseudomonas aeruginosa and Staphylococcus aureus, representing Gram-positive and Gram-negative bacteria. Hydrophilic and hydrophobic quasi-spherical and star-shaped gold (Au)NPs are synthesized to explore the antibacterial mechanism of non-translocating AuNPs. Direct observation of nanoparticle-induced membrane tension and squeezing is demonstrated using a custom-designed microfluidic device, which relieves contraction of the model membrane surface area and eventual lipid bilayer collapse. Quasi-spherical nanoparticles exhibit a greater bactericidal action due to a higher interactive affinity, resulting in greater membrane stretching and rupturing, corroborating the theoretical model. Electron microscopy techniques are used to characterize the NP-bacterial-membrane interactions. This combination of experimental and theoretical results confirm the proposed mechanism of membrane-tension-induced (mechanical) killing of bacterial cells by non-translocating NPs.

Mechano-Bactericidal Titanium Surfaces for Bone Tissue Engineering

Despite advances in the development of bone substitutes and strict aseptic procedures, the majority of failures in bone grafting surgery are related to nosocomial infections. Development of biomaterials combining both osteogenic and antibiotic activity is, therefore, a crucial public health issue. Herein, two types of intrinsically bactericidal titanium supports were fabricated by using commercially scalable techniques: plasma etching or hydrothermal treatment, which display two separate mechanisms of mechano-bactericidal action. Hydrothermal etching produces a randomly nanostructured surface with sharp nanosheet protrusions killing bacteria via cutting of the cell membrane, whereas plasma etching of titanium produces a microscale two-tier hierarchical topography that both reduce bacterial attachment and rupture those bacteria that encounter the surface. The adhesion, growth, and proliferation of human adipose-derived stem cells (hASCs) on the two mechano-bactericidal topographies were assessed. Both types of supports allowed the growth and proliferation of the hASCs in the same manner and cells retained their stemness and osteogenic potential. Furthermore, these supports induced osteogenic differentiation of hASCs without the need of differentiation factors, demonstrating their osteoinductive properties. This study proves that these innovative mechano-bactericidal titanium surfaces with both regenerative and bactericidal properties are a promising solution to improve the success rate of reconstructive surgery.

Mechano-bactericidal actions of nanostructured surfaces

Antibiotic resistance is a global human health threat, causing routine treatments of bacterial infections to become increasingly difficult. The problem is exacerbated by biofilm formation by bacterial pathogens on the surfaces of indwelling medical and dental devices that facilitate high levels of tolerance to antibiotics. The development of new antibacterial nanostructured surfaces shows excellent prospects for application in medicine as next-generation biomaterials. The physico-mechanical interactions between these nanostructured surfaces and bacteria lead to bacterial killing or prevention of bacterial attachment and subsequent biofilm formation, and thus are promising in circumventing bacterial infections. This Review explores the impact of surface roughness on the nanoscale in preventing bacterial colonization of synthetic materials and categorizes the different mechanisms by which various surface nanopatterns exert the necessary physico-mechanical forces on the bacterial cell membrane that will ultimately result in cell death.

Hydrophilic Mechano-Bactericidal Nanopillars Require External Forces to Rapidly Kill Bacteria

Nanopillars have been shown to mechanically damage bacteria, suggesting a promising strategy for future antibacterial surfaces. However, the mechanisms underlying this phenomena remain unclear, which ultimately limits translational potential toward real-world applications. Using real-time and end-point analysis techniques, we demonstrate that in contrast to initial expectations, bacteria on multiple hydrophilic "mechano-bactericidal" surfaces remained viable unless exposed to a moving air-liquid interface, which caused considerable cell death. Reasoning that normal forces arising from surface tension may underlie this mechano-bactericidal activity, we developed computational and experimental models to estimate, manipulate, and recreate the impact of these forces. Our experiments together demonstrate that a critical level of external force acting on cells attached to nanopillar surfaces can rapidly deform and rupture bacteria. These studies provide fundamental physical insight into how nanopillar surfaces can serve as effective antibacterial materials and suggest use-conditions under which such nanotechnology approaches may provide practical value.

Tunable morphological changes of asymmetric titanium nanosheets with bactericidal properties

HYPOTHESIS

Titanium and titanium alloys are often the most popular choice of material for the manufacture of medical implants; however, they remain susceptible to the risk of device-related infection caused by the presence of pathogenic bacteria. Hydrothermal etching of titanium surfaces, to produce random nanosheet topologies, has shown remarkable ability to inactivate pathogenic bacteria via a physical mechanism. We expect that systematic tuning of the nanosheet morphology by controlling fabrication parameters, such as etching time, will allow for optimisation of the surface pattern for superior antibacterial efficacy.

EXPERIMENTS

Using time-dependent hydrothermal processing of bulk titanium, we fabricated bactericidal nanosheets with variable nanoedge morphologies according to a function of etching time. A systematic study was performed to compare the bactericidal efficiency of nanostructured titanium surfaces produced at 0.5, 1, 2, 3, 4, 5, 6, 24 and 60 h of hydrothermal etching.

FINDINGS

Titanium surfaces hydrothermally treated for a period of 6 h were found to achieve maximal antibacterial efficiency of 99 ± 3% against Gram-negative Pseudomonas aeruginosa and 90 ± 9% against Gram-positive Staphylococcus aureus bacteria, two common human pathogens. These surfaces exhibited nanosheets with sharp edges of approximately 10 nm. The nanotopographies presented in this work exhibit the most efficient mechano-bactericidal activity against both Gram-negative and Gram-positive bacteria of any nanostructured titanium topography reported thus far.