Plant mediated biosynthesis of Mn3O4 nanostructures and their biomedical applications

Nanomaterials have drawn significant attention for their biomedical and pharmaceutical applications. In the present study, manganese tetra oxide (Mn3O4) nanoparticles were prepared greenly, and their physicochemical properties were studied. Taxus baccata acetone extract was used as a safely novel precursor for reducing and stabilizing nanoparticles. The synthesized nanoparticles were characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), Brunauer-Emmett-Teller (BET), and Barrett-Joyner-Halenda (BJH) and X-ray diffraction (XRD). The cytotoxicity of Mn3O4 (hausmannite) nanostructures was evaluated against murine macrophage cell line J774-A1 and U87 glioblastoma cancer cells for approximately 72 h. Spherical Mn3O4 nanoparticles with tetragonal spinel structures demonstrated minimal toxicity against normal body cells with CC50 around 876.38 μg mL-1. Moreover, Mn3O4 nanoparticles as well as the combination of antimoniate meglumine and Mn3O4 nanoparticles exhibited maximum mortality in Leishmania major. The synthesized nanominerals displayed a significant inhibitory effect against glioblastoma cancer cells at 100 μg mL-1. The selective cytotoxicity of Mn3O4 nanoparticles indicates that these biogenic agents can be employed simultaneously for diagnostic and therapeutic applications in medical applications.

Dissecting ITC data of metal ions binding to ligands and proteins

BACKGROUND

ITC is a powerful technique that can reliably assess the thermodynamic underpinnings of a wide range of binding events. When metal ions are involved, complications arise in evaluating the data due to unavoidable solution chemistry that includes metal speciation and a variety of linked equilibria.

SCOPE OF REVIEW

This paper identifies these concerns, provides recommendations to avoid common mistakes, and guides the reader through the mathematical treatment of ITC data to arrive at a set of thermodynamic state functions that describe identical chemical events and, ideally, are independent of solution conditions. Further, common metal chromophores used in biological metal sensing studies are proposed as a robust system to determine unknown solution competition.

MAJOR CONCLUSIONS

Metal ions present several complications in ITC experiments. This review presents strategies to avoid these pitfalls and proposes and experimentally validates mathematical approaches to deconvolute complex equilibria that exist in these systems.

GENERAL SIGNIFICANCE

This review discusses the wide range of complications that exists in metal-based ITC experiments. It provides a starting point for scientists new to this field and articulates concerns that will help experienced researchers troubleshoot experiments.

Calcium inhibition of ribonuclease H1 two-metal ion catalysis

Most phosphate-processing enzymes require Mg(2+) as a cofactor to catalyze nucleotide cleavage and transfer reactions. Ca(2+) ions inhibit many of these enzymatic activities, despite Ca(2+) and Mg(2+) having comparable binding affinities and overall biological abundances. Here we study the molecular details of the calcium inhibition mechanism for phosphodiester cleavage, an essential reaction in the metabolism of nucleic acids and nucleotides, by comparing Ca(2+)- and Mg(2+) catalyzed reactions. We study the functional roles of the specific metal ion sites A and B in enabling the catalytic cleavage of an RNA/DNA hybrid substrate by B. halodurans ribonuclease (RNase) H1 using hybrid quantum-mechanics/molecular mechanics (QM/MM) free energy calculations. We find that Ca(2+) substitution of either of the two active-site Mg(2+) ions substantially increases the height of the reaction barrier and thereby abolishes the catalytic activity. Remarkably, Ca(2+) at the A site is inactive also in Mg(2+)-optimized active-site structures along the reaction path, whereas Mg(2+) substitution recovers activity in Ca(2+)-optimized structures. Geometric changes resulting from Ca(2+) substitution at metal ion site A may thus be a secondary factor in the loss of catalytic activity. By contrast, at metal ion site B geometry plays a more important role, with only a partial recovery of activity after Mg(2+) substitution in Ca(2+)-optimized structures. Ca(2+)-substitution also leads to a change in mechanism, with deprotonation of the water nucleophile requiring a closer approach to the scissile phosphate, which in turn increases the barrier. As a result, Ca(2+) is less efficient in activating the water. As a likely cause for the different reactivities of Mg(2+) and Ca(2+) ions in site A, we identify differences in charge transfer to the ions and the associated decrease in the pKa of the oxygen nucleophile attacking the phosphate group.

Kinetic analysis of product release and metal ions in a metallonuclease

Most nucleases rely on divalent cations as cofactors to catalyze the hydrolysis of nucleic acid phosphodiester bonds. Here both equilibrium and kinetic experiments are used to test recently proposed models regarding the metal ion dependence of product release and the degree of cooperativity between metal ions bound in the active sites of the homodimeric PvuII endonuclease. Equilibrium fluorescence anisotropy studies indicate that product binding is dramatically weakened in the presence of metal ions. Pre-steady state kinetics indicate that product release is at least partially rate limiting. Steady state and pre-steady state data fit best to models in which metals remain bound to the enzyme after the release of product. Finally, analysis of cooperative and independent binding models for metal ions indicates that single turnover kinetic data are consistent with little to no positive cooperativity between the two metal ions binding each active site.

A combined experimental and theoretical study of divalent metal ion selectivity and function in proteins: application to E. coli ribonuclease H1

Structural and thermodynamic aspects of alkaline earth metal dication (Mg(2+), Ca(2+), Sr(2+), Ba(2+)) binding to E. coli ribonuclease H1 (RNase H1) have been investigated using both experimental and theoretical methods. The various metal-binding modes of the enzyme were explored using classical molecular dynamics simulations, and relative binding free energies were subsequently evaluated by free energy simulations. The trends in the free energies of model systems based on the simulation structures were subsequently verified using a combination of density functional theory and continuum dielectric methods. The calculations provide a physical basis for the experimental results and suggest plausible role(s) for the metal cation and the catalytically important acidic residues in protein function. Magnesium ion indirectly activates water attack of the phosphorus atom by freeing one of the active site carboxylate residues, D70, to act as a general base through its four first-shell water molecules, which prevent D70 from binding directly to Mg(2+). Calcium ion, on the other hand, inhibits enzyme activity by preventing D70 from acting as a general base through bidentate interactions with both carboxylate oxygen atoms of D70. These additional interactions to D70, in addition to the D10 and E48 monodentate interactions found for Mg(2+), enable Ca(2+) to bind tighter than the other divalent ions. However, a bare Mg(2+) ion with two or less water molecules in the first shell could bind directly to the three active-site carboxylates, in particular D70, thus inhibiting enzymatic activity. The present analyses and results could be generalized to other members of the RNase H family that possess the same structural fold and show similar metal-binding site and Mg(2+)-dependent activity.

Two divalent metal ions in the active site of a new crystal form of human apurinic/apyrimidinic endonuclease, Ape1: implications for the catalytic mechanism

The major human abasic endonuclease, Ape1, is an essential DNA repair enzyme that initiates the removal of apurinic/apyrimidinic sites from DNA, excises 3' replication-blocking moieties, and modulates the DNA binding activity of several transcriptional regulators. We have determined the X-ray structure of the full-length human Ape1 enzyme in two new crystal forms, one at neutral and one at acidic pH. The new structures are generally similar to the previously determined structure of a truncated Ape1 protein, but differ in the conformation of several loop regions and in spans of residues with weak electron density. While only one active-site metal ion is present in the structure determined at low pH, the structure determined from a crystal grown at the pH optimum of Ape1 nuclease activity, pH 7.5, has two metal ions bound 5 A apart in the active site. Enzyme kinetic data indicate that at least two metal-binding sites are functionally important, since Ca(2+) exhibits complex stimulatory and inhibitory effects on the Mg(2+)-dependent catalysis of Ape1, even though Ca(2+) itself does not serve as a cofactor. In conjunction, the structural and kinetic data suggest that Ape1 catalyzes hydrolysis of the DNA backbone through a two metal ion-mediated mechanism.

Co-crystal of Escherichia coli RNase HI with Mn2+ ions reveals two divalent metals bound in the active site

Ribonuclease H (RNase H) selectively degrades the RNA strand of RNA.DNA hybrids in a divalent cation-dependent manner. Previous structural studies revealed a single Mg(2+) ion-binding site in Escherichia coli RNase HI. In the crystal structure of the related RNase H domain of human immunodeficiency virus reverse transcriptase, however, two Mn(2+) ions were observed suggesting a different mode of metal binding. E. coli RNase HI shows catalytic activity in the presence of Mg(2+) or Mn(2+) ions, but these two metals show strikingly different optimal concentrations. Mg(2+) ions are required in millimolar concentrations, but Mn(2+) ions are only required in micromolar quantities. Based upon the metal dependence of E. coli RNase HI activity, we proposed an activation/attenuation model in which one metal is required for catalysis, and binding of a second metal is inhibitory. We have now solved the co-crystal structure of E. coli RNase HI with Mn(2+) ions at 1.9-A resolution. Two octahedrally coordinated Mn(2+) ions are seen to bind to the enzyme-active site. Residues Asp-10, Glu-48, and Asp-70 make direct (inner sphere) coordination contacts to the first (activating) metal, whereas residues Asp-10 and Asp-134 make direct contacts to the second (attenuating) metal. This structure is consistent with biochemical evidence suggesting that two metal ions may bind RNase H but liganding a second ion inhibits RNase H activity.

Divalent metal cofactor binding in the kinetic folding trajectory of Escherichia coli ribonuclease HI

Proteins often require cofactors to perform their biological functions and must fold in the presence of their cognate ligands. Using circular dichroism spectroscopy. we investigated the effects of divalent metal binding upon the folding pathway of Escherichia coli RNase HI. This enzyme binds divalent metal in its active site, which is proximal to the folding core of RNase HI as defined by hydrogen/deuterium exchange studies. Metal binding increases the apparent stability of native RNase HI chiefly by reducing the unfolding rate. As with the apo-form of the protein, refolding from high denaturant concentrations in the presence of Mg2+ follows three-state kinetics: formation of a rapid burst phase followed by measurable single exponential kinetics. Therefore, the overall folding pathway of RNase HI is minimally perturbed by the presence of metal ions. Our results indicate that the metal cofactor enters the active site pocket only after the enzyme reaches its native fold, and therefore, divalent metal binding stabilizes the protein by decreasing its unfolding rate. Furthermore, the binding of the cofactor is dependent upon a carboxylate critical for activity (Asp10). A mutation in this residue (D10A) alters the folding kinetics in the absence of metal ions such that they are similar to those observed for the unaltered enzyme in the presence of metal.

Hydrolysis of phosphates, esters and related substrates by models of biological catalysts

Why study hydrolases, and why model them? First, hydrolases themselves are of fundamental importance and utility. Examples of their utility in organic synthesis include kinetic resolutions of optical isomers. Restriction endonucleases (DNA hydrolases) are key tools for biotechnology and are vital biological catalysts. Peptidases are necessary for protein digestion and can be harnessed to perform the reverse reaction (peptide synthesis). Thus, for these and many other reasons, hydrolases receive the attention of fundamental and applied research. Models of hydrolases can contribute to our understanding of reaction mechanisms and may also supplant the enzymes as useful catalysts under some conditions. Altering or even increasing the specificity of natural catalysts are also goals of these model studies.

Effects of divalent metal ions on the activity and conformation of native and 3-fluorotyrosine-PvuII endonucleases

The activities of restriction enzymes are important examples of Mg(II)-dependent hydrolysis of DNA. While a number of crystallographic studies of enzyme-DNA complexes have also involved metal ions, there have been no solution studies exploring the relationship between enzyme conformation and metal-ion binding in restriction enzymes. Using PvuII restriction endonuclease as a model system, we have successfully developed biosynthetic fluorination and NMR spectroscopy as a solution probe of restriction-enzyme conformation. The utility of this method is demonstrated with a study of metal-ion binding by PvuII endonuclease. Replacement of 74% (+/- 10%) of the Tyr residues in PvuII endonuclease by 3-fluorotyrosine produces an enzyme with Mg(II)-supported specific activity and sequence specificity that is indistinguishable from that of the native enzyme. Mn(II) supports residual activity of both the native and fluorinated enzymes; Ca(II) does not support activity in either enzyme, a result consistent with previous studies. 1H- and 19F-NMR spectroscopic studies reveal that while Mg(II) does not alter the enzyme conformation, the paramagnetic Mn(II) produces both short-range spectral broadening and longer range changes in chemical shift. Most interestingly, Ca(II) binding perturbs a larger number of different resonances than Mn(II). Coupled with earlier mutagenesis studies that place Ca(II) in the active site [Nastri, H. G., Evans, P.D., Walker, I.H. & Riggs, P.D. (1997) J. Biol. Chem. 272, 25761-25767], these data suggest that the enzyme makes conformational adjustments to accommodate the distinct geometric preferences of Ca(II) and may play a role in the inability of this metal ion to support activity in restriction enzymes.

Inert chromium and cobalt complexes as probes of magnesium-dependent enzymes. Evaluation of the mechanistic role of the essential metal cofactor in Escherichia coli exonuclease III

An investigation of the metal ion dependence of Escherichia coli exonuclease III, 3'-5'-exonuclease and exoribonuclease H activities is reported. Catalytic activation of E. coli exonuclease III has been examined for a series of inert chromium complexes Cr(NH3)6-x(H2O)x3+ (x = 0-6) that bear water and ammine ligands in well defined inner-sphere geometries. The importance of hydrogen bonding and electrostatic stabilization for catalysis of this reaction were quantitatively evaluated. Catalytic activation by the essential metal cofactor appears to be mediated through transition-state stabilization by outer-sphere complex formation with substrate. Hydrogen bonding to metal-bound water molecules is the dominant stabilizing interaction.