An ultrasensitive electrochemiluminescence aptasensor for the detection of diethylstilbestrol based on the enhancing mechanism of the metal-organic framework NH2-MIL-125(Ti) in a 3,4,9,10-perylenetetracarboxylic acid/K2S2O8 system

Novel Ultralow-Potential Electrochemiluminescence Aptasensor for the Highly Sensitive Detection of Zearalenone Using a Resonance Energy Transfer System

An ultralow-potential electrochemiluminescence (ECL) aptasensor has been designed for zearalenone (ZEN) assay based on a resonance energy transfer (RET) system with SnS2 QDs/g-C3N4 as a novel luminophore and CuO/NH2-UiO-66 as a dual-quencher. SnS2 QDs were loaded onto g-C3N4 nanosheets and enhanced the ECL luminescence via strong synergistic effects under an ultralow potential. The UV-vis absorption spectrum of CuO/NH2-UiO-66 exhibits considerable overlap with the ECL emission spectrum of SnS2 QDs/g-C3N4, an important consideration for the RET process. In order to stimulate RET, the ZEN aptamer and complementary DNA are introduced for conjugation between the donor and the acceptor. With the binding interaction between ZEN by its aptamer, CuO/NH2-UiO-66 is removed from the electrode surface, resulting in the inhibition of the RET system and an increase in the ECL signal. Under optimal conditions, the as-prepared aptasensor quantified ZEN from 0.5 μg·mL-1 to 0.1 fg·mL-1 with a low limit of detection of 0.085 fg·mL-1, and it exhibited good stability, excellent specificity, high reproducibility, and desirable practicality. The sensing strategy provides a method for mycotoxins assay to monitor food safety.

Antenna effect of perylene-sensitized up-conversion luminescent material amplifies the signal of electrochemiluminescence biosensor platform for the ultra-sensitive detection of enrofloxacin

Recently, up-conversion luminescent (UCL) materials have caught extensive sight on account of their excellent biocompatibility and weak automatic fluorescence background, but the low optical signal makes researchers shy away. Organic dye-sensitized UCL materials can improve the low optical signal drawback of UCL and rejuvenate it with adjustable optical properties and unique antenna effects. In this work, an efficient, simple and selective electrochemiluminescence (ECL) sensing platform was developed for determination of enrofloxacin (ENR). 3,4,9,10-perylene tetracarboxylic acid (PTCA) was successfully used as an "antenna" to improve the ECL performance of the UCL nanoparticles (PEI-NaYF4: Yb, Er) due to its appropriate excitation spectrum position and superior electron transfer rate. The specific recognition function of the aptamer enabled the sensor to eliminate the interference from conspecific impurity. In the presence of ENR, the specific combination of ENR with aptamer made the aptamer fall from surface of the electrode, thus we could see a considerable enhancement of signal. Under the most favourable conditions, the aptasensor based on antenna effect displayed a wide detection range (1.0 × 10-14∼1.0 × 10-6 M), low limit of detection (LOD = 3.0 × 10-15 M) and receivable recoveries (96.0%-102.4%) during water samples analysis. At this point, antenna effect provides a powerful strategy to expand the application of UCL in the field of ECL biosensing.

Metal organic frameworks as advanced functional materials for aptasensor design

BACKGROUND

Advancement in coordination chemistry has achieved an impressive development of metal organic frameworks (MOFs) as the supramolecular hybrid materials, comprising harmonized metal nodes with organic ligands. Scope and approach: MOFs offer the unique properties of easy synthesis, nanoscale structure, adjustable size and morphology, high porosity, large surface area, supreme chemical tunability and stability, and biocompatibility. The features provide an exceptional opportunity for the widely usage of MOFs in the different scientific fields, e.g. biomedicine, electrocatalysis, food safety, energy storage, environmental surveillance, and biosensing platforms. The synergistic incorporation of the aptamer advantages and the superiorities of MOFs attains the novel MOF-based aptasensors. The excellent selectivity and sensitivity of the MOF-based aptasensors nominate them as efficient lab-on-chip tools for cost-effective, label-free, portable, and real-time monitoring of diverse targets.

KEY FINDINGS AND CONCLUSIONS

Here, we review the achievements in the sensor design by cooperation of MOF motifs and aptamers with the conspicuous potential of determining the targets. Finally, some results are expressed that provide a valuable viewpoint for developing the novel MOF-based test strips in the future.

Impedimetric aptasensor based on porphyrin-based covalent-organic framework for determination of diethylstilbestrol

An impedimetric sensing strategy was developed for sensitively determining diethylstilbestrol (DES) based on a platform of porphyrin-containing covalent-organic framework (p-COF). The p-COF was synthesized using 5,10,15,20-tetra (4-aminophenyl) porphyrin (TAPP) and 1,3,6,8-tetrakis(4-formylphenyl) pyrene (TFPy) as building blocks via condensation reaction, for which p-COF was named as TAPP-TFPy-COF. Considering the large specific surface area (302.9 m² g^-1), high porosity, rich nitrogen functionality, superior electrochemical activity, and strong bioaffinity toward DNA strands, the TAPP-TFPy-COF-based platform exhibited enhanced, non-label, and amplified electrochemical signal, large number of immobilized DES-targeted aptamer strands, and fast-response toward the analyte. Electrochemical results reveal that the TAPP-TFPy-COF-based aptasensor promoted the sensing performance for the detection of DES, resulting in an extremely low limit of detection of 0.42 fg mL^-1 within a DES concentration ranging from 1 fg mL^-1 to 0.1 pg mL^-1, which was substantially lower than those of most reported DES sensors. Furthermore, the TAPP-TFPy-COF-based aptasensor possessed outperformed stability, high selectivity, ascendant reproducibility, and acceptable applicability in diverse environments. The recovery values for DES detection in milk, tap water, and frozen shrimp were in the range 91.80-118.50% with low relative standard deviation of 0.11-4.26%. This work provides a new sensing electrochemical approach based on COF network for DES detection and shows a deep insight into the construction of COF-based biosensors, which can be extended to be used for other target compounds.

A DNA tetrahedral nanomaterial-based dual-signal ratiometric electrochemical aptasensor for the detection of ochratoxin A in corn kernel samples

Ochratoxin A (OTA) is a highly toxic food contaminant and is harmful to human beings.

Regenerative Flexible Upconversion-Luminescence Biosensor for Visual Detection of Diethylstilbestrol Based on Smartphone Imaging

Diethylstilbestrol (DES), an endocrine disrupting chemical, has been linked to serious health problems in humans. In this work, a regenerative flexible upconversion-fluorescence biosensor was designed for the detection of DES in foodstuffs and environmental samples. Herein, amino-functionalized upconversion nanoparticles (UCNPs) were synthesized and immobilized on the surface of a flexible polydimethylsiloxane substrate, which was further modified with complementary DNA and dabcyl-labeled DES aptamer. The fluorescence resonance energy transfer (FRET) system was established for DES detection between dabcyl and UCNPs as the acceptor and donor pairs, respectively, which resulted in the quenching of the upconversion luminescence intensity. In the presence of a target, the FRET system was destroyed and upconversion fluorescence was restored due to the stronger affinity of the aptamer toward DES. The designed biosensor was also implemented in a dual-mode signal readout based on images from a smartphone and spectra from a spectrometer. Under the optimized experimental conditions, good linear relationships were achieved based on imaging (y = 53.055x + 36.175, R² = 0.9851) and spectral data (y = 1.1582x + 1.9561, R² = 0.9897). The designed biosensor revealed great practicability with a spiked recovery rate of 77.91-97.95% for DES detection in real environment and foodstuff samples. Furthermore, the proposed biosensor was regenerated seven times with an accuracy threshold of 80% demonstrating its durability and reusability. Thus, this biosensor is expected to be applied to point-of-care and on-site detection based on the developed portable smartphone device and android application.

An electrochemiluminescence aptasensor for diethylstilbestrol assay based on resonance energy transfer between Ag3PO4-Cu-MOF(II) and silver nanoparticles

In this work, a novel electrochemiluminescence (ECL) aptasensor based on the resonance energy transfer (RET) effect between Ag3PO4-Cu-MOF (ii) and silver nanoparticles (Ag NPs) is proposed. The ECL emission spectra of Ag3PO4-Cu-MOF and the ultraviolet absorption spectra of Ag NPs showed a good spectral overlap. Based on this, we designed an "on-off-on" ECL sensing strategy for the sensitive and specific detection of diethylstilbestrol (DES). Under the optimal conditions, the linear range of the sensor for DES detection was 1.0 × 10-12-1.0 × 10-4 M, with a detection limit of 7.2 × 10-13 M (S/N = 3). The method showed simple and fast operation, high sensitivity and selectivity, a strong anti-interference ability and good stability. More importantly, the developed aptasensor exhibited excellent recognition towards residual DES in actual water samples. The sensor has superior measurement capability and potential application value in the field of environment water quality monitoring.

Au nanoparticle plasmon-enhanced electrochemiluminescence aptasensor based on the 1D/2D PTCA/CoP for diclofenac assay

The combination of localized surface plasmon resonance (LSPR) and electrochemiluminescence (ECL) can be an effective way to amplify the signal intensity. In this work, an ECL aptasensor with 3,4,9,10-perylenetetracarboxylic acid-decorated cobalt phosphate (denoted as PTCA/CoP) as the ECL emitter and Au nanoparticles (NPs) as plasma was proposed for diclofenac assay. The prepared PTCA/CoP with special 1D/2D structure exhibited good ability and excellent ECL performance. The diclofenac aptamer acted as a bridge to link the PTCA/CoP and Au NPs; thus, the ECL performance of PTCA/CoP was greatly improved due to the plasma effect of Au NPs. Besides, it was found that the ECL signal of the aptasensor was obviously quenched by the introduction of diclofenac, which might be due to the transformation from the LSPR process to the resonance energy transform (RET) process. Under optimal conditions, the difference of ECL intensity was negatively correlated with the concentration of diclofenac in the range 0.1 pM to 10 μM with a low detection limit of 0.072 pM at the potential of -1.8 V vs. Ag/AgCl (S/N = 3). The aptasensor was proved to be suitable for the detection of diclofenac in real samples, suggesting its great practicability.

A novel electrochemiluminescence sensor based on resonance energy transfer from MoS2QDs@g-C3N4 to NH2-SiO2@PTCA for glutathione assay

In this work, a solid-state electrochemiluminescence (ECL) sensor based on resonance energy transfer (RET) was proposed using MoS2QDs@g-C3N4 as a donor and NH2-SiO2@PTCA as an acceptor. Herein, MoS2QDs could significantly facilitate the stability and efficiency of the ECL of g-C3N4. PTCA provided a large platform to anchor NH2-SiO2 nanoparticles. The prepared MoS2QDs@g-C3N4 exhibited good spectral overlap with the UV-vis absorption spectrum of NH2-SiO2@PTCA. Based on this, we designed an "off-on" ECL sensing strategy for sensitive and selective detection of glutathione (GSH). Under the best conditions, the linear range of the sensor for GSH detection was from 0.001 to 100 μM with a detection limit of 0.63 nM (S/N = 3). More importantly, GSH in commercial samples can be detected using the proposed sensor, which indicated its superior detection capabilities and potential application value in commercial medicines.

A highly-enhanced electrochemiluminescence luminophore generated by a metal-organic framework-linked perylene derivative and its application for ractopamine assay

In this study, a sensitive and effective monitoring method for ractopamine (RAC) was developed based on a sensitive electrochemiluminescence (ECL) aptasensor. Here, we employed a perylene derivative (PTC-PEI) with a Cu-based metal-organic framework (HKUST-1), which could accelerate the electron-transfer (ET) rate and strengthen interactions by the amido bond, resulting in enhanced ECL sensitivity and stability. Astonishingly, compared with the response of PTC-PEI and complex, the ECL signal of the MOF-based ECL material was noticeably raised by 6 times higher than that of PTC-PEI. HKUST-1 exhibited an excellent catalytic effect towards the electrochemical reduction process of S₂O₈^2-, thus allowing more sulfate radical anions (SO₄˙^-) to be generated. The strong ECL intensity of HKUST-1/PTC-PEI not only stemmed from the fixation of PTC-PEI that utilized its excellent film-forming abilities but also originated from the high porosity of HKUST-1 that carried more luminophores able to be excited. Satisfyingly, in the presence of the target molecule RAC, we observed an obvious quenching effect of signal, which could be attributed to aptamer recognition resulting in RAC being specifically captured on the electrode. Under optimal conditions, the developed sensor for the RAC assay displayed a desired linear range of 1.0 × 10^-12-1.0 × 10^-6 M and a low detection limit of 6.17 × 10^-13 M (S/N = 3). This ECL sensor showed high sensitivity, good stability and excellent selectivity. More importantly, the proposed aptasensor exhibited excellent determination towards RAC detection and potential practical utility for real samples.

Determination of acetamiprid using electrochemiluminescent aptasensor modified by MoS2QDs-PATP/PTCA and NH2-UiO-66

A novel aptasensor has been fabricated based on the resonance energy transform (RET) system from MoS₂QDs-PATP/PTCA (donor) to NH₂-UiO-66 (acceptor). The electrochemiluminescence (ECL) signal of PTCA was greatly amplified due to the decoration of MoS₂QDs-PATP, and the NH₂-UiO-66 was utilized to label the signal probe DNA (pDNA), which hybridizes with the exposed aptamer anchored on the surface of MoS₂QDs-PATP/PTCA. With the target acetamiprid, the specific binding of acetamiprid to aptamer causes the connection between the donor and the acceptor to be interrupted and produce an "on" ECL signal. Thus, an "off-on" ECL sensing platform for sensitive and selective acetamiprid assay was designed. Under the optimal condition, the ECL signal of the aptasensor was found to be linearly related to the logarithm of the acetamiprid concentration ranging from 0.1 fM to 0.1 μM with a detection limit of 0.064 fM. More importantly, the recovery rate of the ECL aptasensor was calculated to be 98.7 ~ 106% with a RSD lower 5.1% for the residual acetamiprid assay in real food samples, which indicated that the aptasensor has high potential for practical applications.