A ratiometric fluorescent biosensor for the sensitive determination of α-glucosidase activity and acarbose based on N-doped carbon dots

Bifunctional Tb(III)-modified Ce-MOF nanoprobe for colorimetric and fluorescence sensing of α-glucosidase activity

α-Glucosidase, which directly involves in the metabolism of starch and glycogen and causes an increase in blood sugar level, is the major target enzyme for the precaution and therapy of type II diabetes. Based on the previous work, we adopted a post-synthetic modification method to encapsulate Tb3+ into Ce-MOF nanozyme which owned mixed valence states. Tb@Ce-MOF displayed induced luminescence characteristic and exceptional oxidase-like activity that could oxidize colorless 3,3',5,5'-tetramethylbenzidine (TMB) to blue ox-TMB. α-Glucosidase can hydrolyze the substrate l-ascorbic acid-2-O-α-d-glucopyranosyl (AAG) to generate ascorbic acid (AA), which could increase the Ce3+/Ce4+ redox valence mode in Tb@Ce-MOF, leading to the inhibition of the allochroic reaction of TMB and the decreased absorption of ox-TMB at 652 nm. The energy transfer (EnT) process from Ce3+ to Tb3+ will enhance due to the increased Ce3+/Ce4+ mode in Tb@Ce-MOF, which will result in an enhanced fluorescence signal of Tb@Ce-MOF at 550 nm. But the addition of inhibitor acarbose will inhibit the above process. We have constructed a dual-mode detection platform of α-glucosidase and its inhibitor via colorimetric and fluorometric method. The linear range of α-glucosidase were 0.01-0.5 U/mL (colorimetric mode) and 0.8-1.5 U/mL (fluorometric mode), respectively, with a detection limit as low as 0.0018 U/mL. Furthermore, our approach was also successfully employed to the analysis of α-glucosidase in serum samples.

GAA/(Au-Au/IrO2)@Cu(PABA) reactor with cascade catalytic activity for α-glucosidase inhibitor screening

BACKGROUND

In vitro screening strategies based on the inhibition of α-glucosidase (GAA) activity have been widely used for the discovery of potential antidiabetic drugs, but they still face some challenges, such as poor enzyme stability, non-reusability and narrow range of applicability. To overcome these limitations, an in vitro screening method based on GAA@GOx@Cu-MOF reactor was developed in our previous study. However, the method was still not satisfactory enough in terms of construction cost, pH stability, organic solvent resistance and reusability. Thence, there is still a great need for the development of in vitro screening methods with lower cost and wider applicability.

RESULTS

A colorimetric sensing strategy based on GAA/(Au-Au/IrO2)@Cu(PABA) cascade catalytic reactor, which constructed through simultaneous encapsulating Au-Au/IrO2 nanozyme with glucose oxidase-mimicking and peroxidase-mimicking activities and GAA in Cu(PABA) carrier with peroxidase-mimicking activity, was innovatively developed for in vitro screening of GAA inhibitors in this work. It was found that the reactor not only exhibited excellent thermal stability, pH stability, organic solvent resistance, room temperature storage stability, and reusability, but also possessed cascade catalytic performance, with approximately 12.36-fold increased catalytic activity compared to the free system (GAA + Au-Au/IrO2). Moreover, the in vitro GAA inhibitors screening method based on this reactor demonstrated considerable anti-interference performance and detection sensitivity, with a detection limit of 4.79 nM for acarbose. Meanwhile, the method owned good reliability and accuracy, and has been successfully applied to the in vitro screening of oleanolic acid derivatives as potential GAA inhibitors.

SIGNIFICANCE

This method not only more effectively solved the shortcomings of poor stability, narrow scope of application, and non-reusability of natural enzymes in the classical method compared with our previous work, but also broaden the application scope of Au-Au/IrO2 nanozyme with glucose oxidase and peroxidase mimicking activities, and Cu(PABA) carrier with peroxidase mimicking activity, which was expected to be a new generation candidate method for GAA inhibitor screening.

A colorimetric sensing strategy based on chitosan-stabilized platinum nanoparticles for quick detection of α-glucosidase activity and inhibitor screening

α-Glucosidase (α-Glu) is implicated in the progression and pathogenesis of type II diabetes (T2D). In this study, we developed a rapid colorimetric technique using platinum nanoparticles stabilized by chitosan (Ch-PtNPs) to detect α-Glu activity and its inhibitor. The Ch-PtNPs facilitate the conversion of 3,3',5,5'-tetramethylbenzidine (TMB) into oxidized TMB (oxTMB) in the presence of dissolved O2. The catalytic hydrolysis of 2-O-α-D-glucopyranosyl-L-ascorbic acid (AA-2G) by α-Glu produces ascorbic acid (AA), which reduces oxTMB to TMB, leading to the fading of the blue color. However, the presence of α-Glu inhibitors (AGIs) hinders the generation of AA, allowing Ch-PtNPs to re-oxidize colorless TMB back to blue oxTMB. This unique phenomenon enables the colorimetric detection of α-Glu activity and AGIs. The linear range for α-Glu was found to be 0.1-1.0 U mL-1 and the detection limit was 0.026 U mL-1. Additionally, the half-maximal inhibition value (IC50) for acarbose, an α-Glu inhibitor, was calculated to be 0.4769 mM. Excitingly, this sensing platform successfully detected α-Glu activity in human serum samples and effectively screened AGIs. These promising findings highlight the potential application of the proposed strategy in clinical diabetes diagnosis and drug discovery.

A dual-mode sensing system based on carbon quantum dots and Fe nanozymes for the detection of α-glucosidase and its inhibitors

In this research, a sensitive fluorometric and colorimetric dual-mode sensing platform based on nitrogen-doped carbon quantum dots (NCDs) and magnetic Fe nanoparticles with peroxidase-like activity (Fe nanozymes, Fe NZs) was established, and was further applied for the detection of α-glucosidase (α-glu) and its inhibitors. The ⋅OH that produced by H2O2 catalyzed by Fe NZs can oxidize the colorless diammonium 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonate) (ABTS) to green oxABTS, and a noticeable absorption peak at 417 nm appeared. Simultaneously, oxABTS can quench the fluorescence of NCDs at 402 nm via fluorescence resonance energy transfer (FRET). 2-O-α-D-glucopyranosyl-L-ascorbic acid (AAG) can be decomposed by α-glu to glucose and ascorbic acid (AA), AA can prevent the oxidation of ABTS, resulting in the absorption at 417 nm decreased. Moreover, the quenching effect of oxABTS on NCDs is weakened, and the fluorescence at 402 nm is restored. Therefore, based on the change of absorption at 417 nm and fluorescence at 402 nm, the fluorometric and colorimetric dual-mode sensing method can be used for the determination of acarbose and voglibose that are the inhibitors of α-glu.

Sulfur dots and iron co-doped nickel-based metal-organic frameworks with high nanozyme activity for the colorimetric determination of α-glucosidase activity

Alpha-glucosidase (α-Glu) plays a crucial role in regulating the normal physiological function of the body; therefore, α-Glu activity detection is crucial in clinical studies. In this study, a nickel-based metal-organic framework (Ni-MOF) co-doped with sulfur dots (SDs) and iron (Fe) was designed and constructed for the colorimetric detection of α-Glu. The SDs/Fe/Ni-MOF shows a very low Michaelis-Menten constant (0.0466 mM) for H2O2, suggesting a very high affinity for H2O2. Additionally, the free radicals generated by the nanozyme-catalyzed reaction were analyzed, and the feasibility of the nanozyme-catalyzed process was further verified using density functional theory. The bimetallic (Fe and Ni) can improve the catalytic activity of the material, and sulfur can improve the affinity with the substrate to further enhance the catalytic performance. Notably, hydroquinone (HQ) inhibits nanozyme activity, whereas α-Glu hydrolyzes alpha-arbutin (α-Arb) and subsequently produces HQ. Therefore, this study developed a method for detecting α-Glu activity using α-Arb as a substrate. This method has high selectivity, a wide detection range (1.00-100 U L-1), and a low detection limit (0.525 U L-1). Finally, the method was used to α-Glu activity detected in serum samples with good accuracy. This study provides a new method for the detection of α-Glu.

Small-Molecule Probe-Induced In Situ-Sensitized Photoelectrochemical Biosensor for Monitoring α-Glucosidase Activity

Semiconductor-based photoelectrochemical (PEC) biosensors have garnered significant attention in the field of disease diagnosis and treatment. However, the recognition units of these biosensors are mainly limited to bioactive macromolecules, which hinder the photoelectric response due to their insulating characteristics. In this study, we develop an in situ-sensitized strategy that utilizes a small-molecule probe at the interface of the photoelectrode to accurately detect α-glucosidase (α-Glu) activity. Silane, a prototype small-molecule probe, was surface-modified on graphitic carbon nitride to generate Si nanoparticles upon reacting with hydroquinone, the enzymatic product of α-Glu. The in situ formed heterojunction enhances the light-harvesting property and photoexcited carrier separation efficiency. As a result, the in situ-sensitized PEC biosensor demonstrates excellent accuracy, a low detection limit, and outstanding anti-interference ability, showing good applicability in evaluating α-Glu activity and its inhibitors in human serum samples. This novel in situ sensitization approach using small-molecule probes opens up new avenues for developing simple and efficient PEC biosensing platforms by replacing conventional biorecognition elements.

Ultrasensitive determination of α-glucosidase activity using CoOOH nanozymes and its application to inhibitor screening

In this work, a novel method for the colorimetric sensing of α-glucosidase (α-Glu) activity was developed based on CoOOH nanoflakes (NFs), which exhibit efficient oxidase-mimicking activity. Colorless 3,3',5,5'-tetramethylbenzidine (TMB) can be oxidized by CoOOH NFs into blue-colored oxidized TMB (oxTMB) in the absence of H₂O₂. L-Ascorbic acid-2-O-α-D-glucopyranose (AAG) can be hydrolysed by α-glucosidase to produce ascorbic acid, resulting in a significant decrease of catalytic activity of CoOOH NFs. Thus, a colorimetric α-glucosidase activity detection method was designed with a limit of detection of 0.0048 U mL^-1. Furthermore, the designed sensing platform exhibits favorable applicability for the α-glucosidase (α-Glu) activity assay in real samples. Meanwhile, this method can be expanded to study the inhibitors of α-Glu. Finally, the as-proposed method combined with a smartphone would be a color recognizer, which was successfully applied for the determination of α-Glu activity in human serum samples.

Dual-Emission Carbon-Dot Ratiometric Fluorescence Sensor for Morphine Recognition in Biological Samples

Herein, a novel nitr[ogen-doped carbon dot (N-CD) fluorescence sensor with a dual emission ratio is developed using the microwave-assisted synthesis of m-phenylenediamine and spermidine. As a result of the fluorescence inner filtration effect (IFE) effect between morphine (MOR) and N-CD, the blue fluorescence of N-CDs at 350 nm was reduced in the presence of MOR, whereas the fluorescence of N-CDs at 456 nm increased substantially. The results demonstrated that the approach has a tremendous potential and that the linear range of MOR detection is 0.25-25 µg/mL, with a 71.8 ng/mL detection limit. Under UV light, the blue fluorescent system is easily visible to the naked eye. More significantly, the sensor proved successful in providing satisfactory results for the speciation measurement of MOR in a variety of biological samples.

Visual Sensing of β-Glucosidase From Intestinal Fungus in the Generation of Cytotoxic Icarisid II

β-Glucosidase (β-Glc) is an enzyme capable of the selective hydrolysis of the β-glycosidic bond of glycosides and glycans containing glucose. β-Glc expressed by intestinal microbiota has attracted increasing levels of interest, due to their important roles for the metabolism of exogenous substances in the gut. Using the 2-((6-hydroxy-2,3-dihydro-1H-xanthen-4-yl)methylene)malononitrile fluorophore (DXM-OH, λ_em 636 nm) and the recognition group β-Glucose, an enzymatic activatable turn-on fluorescent probe (DXM-Glc) was developed for the selective and sensitive sensing of β-Glc. In addition, DXM-Glc could be used to sense endogenous β-Glc in living fungal cells. Using DXM-Glc, Pichia terricola M2 was identified as a functional intestinal fungus with β-Glc expression. P. terricola M2 could transform the flavone glycoside Icariin to Icariside Ⅱ efficiently, which confirmed the metabolism of glycosides in the gut mediated by fungi. Furthermore, Icariside Ⅱ could inhibit the proliferation of human endometrial cancer cells (RL 95-2 and ishikawa) significantly, suggesting the metabolic activation of Icariin by intestinal fungi in vivo. Therefore, DXM-Glc as a probe for β-Glc provided a novel technique for the investigation of the metabolism of bioactive substances by intestinal microbiota.

Quantification of 2-chlorohydroquinone based on interaction between N-doped carbon quantum dots probe and photolysis products in fluorescence system

As a member of chlorophenolic compounds, 2-chlorohydroquinone (H₂QCl) has been widely used as intermediates in various chemical industries and leaded to serious threat on the environment. It is urgent to develop simple and robust analytical method for sensitive and selective determination of H₂QCl. Carbon quantum dots (CQDs), a promising photoluminescence nanomaterial, have gained sufficient concern as optical sensors owing to their outstanding photochemical properties. In this work, nitrogen doped carbon quantum dots (N-CQDs) were successfully synthesized by a simple secondary hydrothermal method and applied as a fluorescent probe for the quantitation of H₂QCl. A new fluorescence region centered at excitation wavelength of 310 nm and emission wavelength of 390 nm appeared after nitrogen doping. It was found that the N-CQDs exhibited a high selectivity towards H₂QCl with sensitive fluorescence response and the fluorescence quenching of N-CQDs was linear with the concentration of H₂QCl in the range of 30-90 μM (Y = 0.0049X + 0.1255, R² = 0.996). This is the first time that the dual role of excitation light was observed in the fluorescence detection system. The ultraviolet light acted as not only the excitation energy source for N-CQDs photoluminescence, but also the light source for photolysis of H₂QCl. In the detection process, H₂QCl was degraded to p-benzoquinone by light, and then the CQDs combined with p-benzoquinone through Michael addition reaction under the action of doped nitrogen. The electron transfer from N-CQDs to the linked p-benzoquinone caused the quenching of fluorescence originated from the edge state of N-CQDs. Furthermore, this established method can be applied for the quantitative determination of H₂QCl in environmental water samples with satisfactory recoveries between 94.31 and 105.51%.

A ratiometric fluorescence platform based on carbon dots for visual and rapid detection of copper(II) and fluoroquinolones

A simple smartphone-integrated ratiometric fluorescent sensing system for visual determination of copper ions (Cu²⁺) and fluoroquinolones (FQs) was developed based on carbon dots (CDs) which were synthesized through the high-temperature pyrolysis of citric acid. In this system, with the fluorescence resonance energy transfer effect between CDs and 2,3-diaminophenazine (oxOPD), the detection of Cu²⁺ and ciprofloxacin (CIP, an example for FQs) was realized. Cu²⁺ catalyzes the oxidation of OPD to form oxOPD with yellow fluorescence, resulting in the quenching of CDs. In addition, CIP can inhibit the catalytic activity of Cu²⁺ and induce the recovery of CDs fluorescence. Under the excitation of 400 nm, the changes of CDs fluorescence at 472 nm and oxOPD fluorescence at 556 nm were monitored. The detection results showed that the sensing system exhibited good selectivity and sensitivity to Cu²⁺ and CIP with the limit of detection of 2.32 × 10^-8 mol L^-1 and 0.2 ng mL^-1, respectively. In addition, a smartphone was developed as a portable analyzer to capture the change of fluorescence color and quickly analyze the concentration of Cu²⁺ and CIP. The proposed smartphone-based sensing platform has satisfactory sensitivity, and it has application prospects for detecting Cu²⁺ and FQs in food safety monitoring.

A colorimetric sensing strategy based on enzyme@metal-organic framework and oxidase-like IrO2/MnO2 nanocomposite for α-glucosidase inhibitor screening

A highly sensitive colorimetric sensing strategy based on enzyme@metal-organic framework (GAA@Cu-MOF) and IrO₂/MnO₂ nanocomposite was exploited innovatively for screening of α-glucosidase (GAA) inhibitors. IrO₂/MnO₂ nanocomposite exhibits excellent oxidase-mimicking activity which can directly catalyze the oxidation of 3,3^,5,5^,-tetramethylbenzidine (TMB) into a blue product with an absorption maximum at 652 nm. And GAA@Cu-MOF can decompose L-ascorbic acid-2-O-α-D-glucopyranosyl (AAG) to ascorbic acid (AA). The produced AA can destroy the IrO₂/MnO₂ nanocomposite and reduce its oxidase-like activity. However, the generation of AA is restricted when GAA inhibitors are added to the system, which allows the oxidase-like activity of the IrO₂/MnO₂ nanocomposite to be maintained. In view of this, a method for screening of GAA inhibitors was developed. In addition to enhancing the stability of GAA, the method can also effectively avoid the potential interference of H₂O₂ in the screening process of GAA inhibitors, which helps to improve the sensitivity of the method. Therefore, highly sensitive determination for acarbose and ascorbic acid are achieved with detection limits of 6.27 nM and 1.23 μM, respectively. The proposed method was successfully applied to screen potential GAA inhibitors from oleanolic acid derivatives. Graphical abstract.