Synthesis and Characterization of Monolayer Colloidal Sheets

Sheet-like colloidal assemblies represent model systems to investigate the structure and properties of two-dimensional materials. Here, we report a simple yet versatile method for the preparation of colloidal monolayer sheet-like assemblies that affords control over the size, crystalline order, flexibility, and defect density. The protocol that we report relies on self-assembly of colloids as a sessile drop of dispersion is evaporated on an oil-covered substrate. In this case, the contact line continually moves as the drop shrinks. Polyethyleneimine polymer-covered micrometer-sized colloidal particles are transported to the air-water interface and assemble to form a monolayer sheet as the drop dries. Cross-linking the polymer renders the colloidal assembly permanent. Interestingly, monodisperse colloidal particles form disordered assemblies when dried from low concentration dispersions, while polycrystalline ordered assemblies form at higher concentrations. We demonstrate that increasing the cross-linker to polymer ratio decreases the flexibility of the assembly. Introduction of different-sized colloidal particles in a sheet leads to increased disorder. Removal of sacrificial particles from the sheet allowed the introduction of "holes" in the sheets. Thus, these colloidal sheets are models for probing the effects of disorder, doping, and vacancies in two-dimensional systems.

Robust Electrostatic-Templated Polymerization for Controllable Synthesis of Stable and Permeable Polyelectrolyte Vesicles

Polymer vesicles are of profound interest for designing delivery vehicles and nanoreactors toward a variety of biomedical and catalytic applications, yet robust synthesis of stable and permeable vesicles remains challenging. Here, we propose an electrostatic-templated polymerization that enables fabrication of polyelectrolyte vesicles with simultaneously regulated stability and permeability. In our design, cationic monomers were copolymerized with cross-linkers in the presence of a polyanionic-neutral diblock copolymer as a template. By properly choosing the block length ratio of the template, we fabricated a type of polyion complex vesicle consisting of a cross-linked cationic membrane, electrostatically assembled with the template copolymer which can be removed by sequential dissociation and separation under concentrated salt. We finally obtained stable polyelectrolyte vesicles of regulated size, membrane permeability, and response properties by tuning the synthesis factors including ionic strength, cross-linker type, and fraction as well as different monomers and concentrations. As a proof-of-concept, lipase was loaded in the designed cationic vesicles, which exhibited enhanced enzyme stability and activity. Our study has developed a novel and robust strategy for controllable synthesis of a new class of stable and permeable polymer (polyelectrolyte) vesicles that feature great potential applications as functional delivery carriers and nanoreactors.

Arginine-Functional Methacrylic Block Copolymer Nanoparticles: Synthesis, Characterization, and Adsorption onto a Model Planar Substrate

Recently, we reported the synthesis of a hydrophilic aldehyde-functional methacrylic polymer (Angew. Chem., 2021, 60, 12032-12037). Herein we demonstrate that such polymers can be reacted with arginine in aqueous solution to produce arginine-functional methacrylic polymers without recourse to protecting group chemistry. Careful control of the solution pH is essential to ensure regioselective imine bond formation; subsequent reductive amination leads to a hydrolytically stable amide linkage. This new protocol was used to prepare a series of arginine-functionalized diblock copolymer nanoparticles of varying size via polymerization-induced self-assembly in aqueous media. Adsorption of these cationic nanoparticles onto silica was monitored using a quartz crystal microbalance. Strong electrostatic adsorption occurred at pH 7 (Γ = 14.7 mg m-2), whereas much weaker adsorption occurred at pH 3 (Γ = 1.9 mg m-2). These findings were corroborated by electron microscopy, which indicated a surface coverage of 42% at pH 7 but only 5% at pH 3.

Polymerization-Induced Self-Assembly: An Emerging Tool for Generating Polymer-Based Biohybrid Nanostructures

The combination of biomolecules and synthetic polymers provides an easy access to utilize advantages from both the synthetic world and nature. This is not only important for the development of novel innovative materials, but also promotes the application of biomolecules in various fields including medicine, catalysis, and water treatment, etc. Due to the rapid progress in synthesis strategies for polymer nanomaterials and deepened understanding of biomolecules' structures and functions, the construction of advanced polymer-based biohybrid nanostructures (PBBNs) becomes prospective and attainable. Polymerization-induced self-assembly (PISA), as an efficient and versatile technique in obtaining polymeric nano-objects at high concentrations, has demonstrated to be an attractive alternative to existing self-assembly procedures. Those advantages induce the focus on the fabrication of PBBNs via the PISA technique. In this review, current preparation strategies are illustrated based on the PISA technique for achieving various PBBNs, including grafting-from and grafting-through methods, as well as encapsulation of biomolecules during and subsequent to the PISA process. Finally, advantages and drawbacks are discussed in the fabrication of PBBNs via the PISA technique and obstacles are identified that need to be overcome to enable commercial application.

Switchable Electrostatically Templated Polymerization

We report a switchable, templated polymerization system where the strength of the templating effect can be modulated by solution pH and/or ionic strength. The responsiveness to these cues is incorporated through a dendritic polyamidoamine-based template of which the charge density depends on pH. The dendrimers act as a template for the polymerization of an oppositely charged monomer, namely sodium styrene sulfonate. We show that the rate of polymerization and maximum achievable monomer conversion are directly related to the charge density of the template, and hence the environmental pH. The polymerization could effectively be switched "ON" and "OFF" on demand, by cycling between acidic and alkaline reaction environments. These findings break ground for a novel concept, namely harnessing co-assembly of a template and growing polymer chains with tunable association strength to create and control coupled polymerization and self-assembly pathways of (charged) macromolecular building blocks.

Linear and Star Block Copolymer Nanoparticles Prepared by Heterogeneous RAFT Polymerization Using an ω,ω-Heterodifunctional Macro-RAFT Agent

Herein, an ω,ω-heterodifunctional macromolecular reversible addition-fragmentation chain transfer (macro-RAFT) agent containing two different RAFT end groups was synthesized and employed to mediate aqueous photoinitiated RAFT dispersion polymerization of a methacrylic monomer. Because of the different RAFT controllability of two RAFT end groups toward methacrylic monomers, the RAFT end group with good controllability dominated the polymerization while the other RAFT end group with poor controllability was unreacted, leading to the formation of linear block copolymers. Because of the unique structure of the linear block copolymers, a diverse set of block copolymer nanoparticles with rich RAFT groups at the interface of the hydrophilic corona/the hydrophobic core were successfully prepared. Finally, μ-A(BC)C miktoarm star block copolymer nanoparticles were prepared by RAFT seeded emulsion polymerization of an acrylic monomer, which enables the further morphological control over polymer nanoparticles. We believe that the utilization of an ω,ω-heterodifunctional macro-RAFT agent in heterogeneous RAFT polymerization will offer considerable opportunities for the rational synthesis of well-defined molecular architectures and polymer nanoparticles.

(Bio)degradable and Biocompatible Nano-Objects from Polymerization-Induced and Crystallization-Driven Self-Assembly

Polymerization-induced self-assembly (PISA) and crystallization-driven self-assembly (CDSA) techniques have emerged as powerful approaches to produce a broad range of advanced synthetic nano-objects with high potential in biomedical applications. PISA produces nano-objects of different morphologies (e.g., spheres, vesicles and worms), with high solids content (∼10-50 wt %) and without additional surfactant. CDSA can finely control the self-assembly of block copolymers and readily forms nonspherical crystalline nano-objects and more complex, hierarchical assemblies, with spatial and dimensional control over particle length or surface area, which is typically difficult to achieve by PISA. Considering the importance of these two assembly techniques in the current scientific landscape of block copolymer self-assembly and the craze for their use in the biomedical field, this review will focus on the advances in PISA and CDSA to produce nano-objects suitable for biomedical applications in terms of (bio)degradability and biocompatibility. This review will therefore discuss these two aspects in order to guide the future design of block copolymer nanoparticles for future translation toward clinical applications.

Construction of Supramolecular Systems That Achieve Lifelike Functions

The Nobel Prize in Chemistry was awarded in 1987 and 2016 for research in supramolecular chemistry on the "development and use of molecules with structure-specific interactions of high selectivity" and the "design and production of molecular machines", respectively. This confirmed the explosive development of supramolecular chemistry. In addition, attempts have been made in systems chemistry to embody the complex functions of living organisms as artificial non-equilibrium chemical systems, which have not received much attention in supramolecular chemistry. In this review, we explain recent developments in supramolecular chemistry through four categories: stimuli-responsiveness, time evolution, dissipative self-assembly, and hierarchical expression of functions. We discuss the development of non-equilibrium supramolecular systems, including the use of molecules with precisely designed properties, to achieve functions found in life as a hierarchical chemical system.

Block Copolymer Vesicles with Tunable Membrane Thicknesses and Compositions Prepared by Aqueous Seeded Photoinitiated Polymerization-Induced Self-Assembly at Room Temperature

Block copolymer vesicles with diverse functionalities and intrinsic hollow structures have received considerable attention due to their broad applications in biomedical fields, including drug delivery, bioimaging, theranostics, gene therapy, etc. However, efficient preparation of block copolymer vesicles with tunable membrane thicknesses and compositions under mild conditions is still a challenge. Herein, we report an aqueous seeded photoinitiated polymerization-induced self-assembly (photo-PISA) for the precise preparation of block copolymer vesicles at room temperature. By changing the total degree of polymerization (DP) of the hydrophobic block in seeded photo-PISA, one can easily tune the membrane thickness without compromising the morphology of vesicles. Moreover, by adding different comonomers such as hydrophobic monomers, hydrophilic monomers, and cross-linkers into seeded photo-PISA, vesicles with different compositions could be prepared without compromising the morphology and colloidal stability. Polymerization kinetics show that seeded photo-PISA can skip the step of in situ self-assembly with a short homogeneous polymerization stage being observed. To demonstrate potential biological applications, enzymatic nanoreactors were constructed by loading horseradish peroxidase (HRP) inside vesicles via seeded photo-PISA. The enzymatic properties of these nanoreactors could be easily regulated by changing the membrane thickness and hydrophobicity. It is expected that this method can provide a facile platform for the precise preparation of block copolymer vesicles that may find applications in different fields.

Host-guest complexation modulated aqueous polymerization-induced self-assembly for monodisperse hierarchical nanoflowers

This work presents a one-step synthesis of monodisperse nanoflowers by aqueous polymerization-induced self-assembly (PISA), modulated by host-guest interactions. Owing to the low monomer swelling of nanoparticles restricted by host-guest complexation, hierarchical surficial micellar structures were generated at the outer surface of the vesicles, forming fractal nanoflowers with a diameter polydispersity as low as 1.01. Our method allows the straightforward synthesis of monodisperse hierarchical nanoparticles for a wide range of applications.

Liquid-Phase Condensation via Macromolecular Crowding in Polymerization-Induced Electrostatic Self-Assembly

Macromolecular crowding plays a key role in liquid-phase condensation of proteins and membraneless organelles yet is largely unexplored for artificial liquid materials. Herein, we present a strategy for direct access to multiphase liquid condensates with individual charged/neutral subdomains, by introducing macromolecular crowding to our previous protocol of liquid-liquid phase-separation-driven polymerization-induced electrostatic self-assembly (LLPS-PIESA). We show that reversible addition fragmentation chain transfer (RAFT) aqueous dispersion photo-copolymerization of a charged monomer with a specific neutral monomer, in the presence of a polar macrochain transfer agent (CTA) and an oppositely charged polyion, can induce self-sorting and macromolecular crowding. LLPS-PIESA proceeds via liquid-phase condensation of as-assembled nascent clusters up to biologically important nanostructured multiphase condensates with individual charged/neutral subdomains.

Hierarchical polyion complex vesicles from PAMAM dendrimers

Hierarchical dendrimer-based polyion complex (PIC) vesicles with multiple compartments have attracted considerable attention as functional delivery vehicles and nano-carriers. Formation of these vesicles relies on the electrostatic assembly of asymmetric polyelectrolytes, namely branched dendrimers with linear polyion-neutral diblock copolymers. However, successful incorporation of dendrimers in vesicle lamellae is challenging due to the compact structure of dendrimers, and therefore, vesicles reported so far are prepared mainly with low generation dendrimers which lack the cavity required for carrier functions. Here, we present a new assembly combination of amine-terminated dendrimer polyamidoamine (PAMAM) with polyion-neutral diblock copolymer poly (styrene sulphonate-b-ethylene oxide) (PSS-b-PEO). The strong charge interaction between the building blocks leads to stable and well-defined PIC vesicles that can tolerate not only different PSS block lengths but, more importantly, also different dendrimer generations from 2 to 7. As a consequence, high generation dendrimers with a cavity can be packed in the vesicle wall, and one obtains hierarchical PIC vesicles with multiple compartments, namely the dendrimer cavity for loading small hydrophobic cargo, and the vesicle lumen for encapsulating hydrophilic macromolecules. Our study demonstrates that combining proper building blocks enables to manipulate the charge interactions, which is essential for controlling the dendrimer packing and the formation of PIC vesicles. These findings should be helpful for understanding the assembly of asymmetric (linear / branched) polyelectrolyte complexes, as well as for designing new hierarchical PIC vesicles for controlled delivery of multiple active substances.

Protein-, (Poly)peptide-, and Amino Acid-Based Nanostructures Prepared via Polymerization-Induced Self-Assembly

Proteins and peptides, built from precisely defined amino acid sequences, are an important class of biomolecules that play a vital role in most biological functions. Preparation of nanostructures through functionalization of natural, hydrophilic proteins/peptides with synthetic polymers or upon self-assembly of all-synthetic amphiphilic copolypept(o)ides and amino acid-containing polymers enables access to novel protein-mimicking biomaterials with superior physicochemical properties and immense biorelevant scope. In recent years, polymerization-induced self-assembly (PISA) has been established as an efficient and versatile alternative method to existing self-assembly procedures for the reproducible development of block copolymer nano-objects in situ at high concentrations and, thus, provides an ideal platform for engineering protein-inspired nanomaterials. In this review article, the different strategies employed for direct construction of protein-, (poly)peptide-, and amino acid-based nanostructures via PISA are described with particular focus on the characteristics of the developed block copolymer assemblies, as well as their utilization in various pharmaceutical and biomedical applications.

Amino acid acrylamide mimics: creation of a consistent monomer library and characterization of their polymerization behaviour

A novel consistent approach to mimic the structure of biopolymers via precision polymer synthesis with reversible deactivation radical polymerization (RDRP).

Chemical Feedback in Templated Reaction-Assembly Networks

Chemical feedback between building block synthesis and their subsequent supramolecular self-assembly into nanostructures has profound effects on assembly pathways. Nature harnesses feedback in reaction-assembly networks in a variety of scenarios including virion formation and protein folding. Also in nanomaterial synthesis, reaction-assembly networks have emerged as a promising control strategy to regulate assembly processes. Yet, how chemical feedback affects the fundamental pathways of structure formation remains unclear. Here, we unravel the pathways of a templated reaction-assembly network that couples a covalent polymerization to an electrostatic coassembly process. We show how the supramolecular staging of building blocks at a macromolecular template can accelerate the polymerization reaction and prevent the formation of kinetically trapped structures inherent to the process in the absence of feedback. Finally, we establish a predictive kinetic reaction model that quantitatively describes the pathways underlying these reaction-assembly networks. Our results shed light on the fundamental mechanisms by which chemical feedback can steer self-assembly reactions and can be used to rationally design new nanostructures.

Solvent-Controlled Topological Evolution from Nanospheres to Superhelices

Supramolecular assemblies with diverse morphologies are crucial in determining their biochemical or physical properties. However, the topological evolution and self-assembly intermediates as well as the mechanism remain elusive. Herein, a dynamic morphological evolution from solid nanospheres to superhelical nanofibers is revealed via self-assembly of a minimal l-tryptophan-based derivative (LPWM) with various mixed solvent combinations, including the formation of solid nanospheres, the fusion of nanospheres into pearling necklace, the disintegration of necklace into short nanofibers, the distortion of nanofibers into nanotwists, and the entanglement of nanotwists into superhelices. It is found that the breakage of intramolecular H-bonds and reconstruction of intermolecular H-bonds, as well as the variation of aromatic interactions and hydrophobic effects, are the key driving forces for topological transformation, especially the dimensional evolution. The nanospheres and nanofibers demonstrate discrepant behaviors towards mouse neural stem cell (NSC) differentiation that compared with negligible impact of nanospheres scaffold, the nanofibers scaffold is favorable for NSC differentiation into neurons. The remarkable dynamic regulation of assembly process, together with the NSC differentiation on twisted nanofibers are making this system an ideal model to interpret complex proteins fibrillation processes and investigate the structure-function relationship.

Cross-linking approaches for block copolymer nano-assemblies via RAFT-mediated polymerization-induced self-assembly

This minireview summarizes the current cross-linking approaches to stabilize block copolymer nano-assemblies obtained via RAFT-mediated PISA process.