Signal Modulation of Organic Photoelectrochemical Transistor by a Z-Scheme Photocathodic Gate: An Innovative Dual Amplification Strategy for Sensitive Aptasensing Application

Pursuing a more efficient signal amplification strategy is highly demanded for improving the performance of the promising cathodic photoelectrochemical (PEC) sensors. In this work, we present an extremely effective dual signal amplification strategy by the integration of a Z-scheme nanohybrids-based photocathode with the effective signal modulation of an organic photoelectrochemical transistor (OPECT) device. Specifically, photocathodic gate material of CdTe-BiOBr nanohybrids with a Z-scheme electron-transfer route was designed and synthesized for preliminary improvement of the activity of the photogate; afterward, signal modulation of the OPECT system by the photocathodic gate of CdTe-BiOBr was then accomplished for further signal amplification by 2 orders of magnitude. As a result, the output PEC signal of CdTe-BiOBr was enhanced by 17.5-fold as compared to BiOBr, and the channel current (IDS) of the OPECT device was 117-fold magnified than its gate current (IG) response. Exemplified by tetracycline (TC) as a model target and aptamer as the specific recognition element, a versatile cathodic aptasensing platform was constructed based on the proposed OPECT device. The introduced OPECT aptasensor merits advantages, including a good linear range (1.0 × 10-12 to 1.0 × 10-6 M), a low limit of detection (4.2 × 10-13 M), and superior sensitivity than the traditional PEC methods for TC detection, which represents a universal protocol for developing the innovative photocathodic OPECT sensing platform toward accurate analysis.

Effect of perylene assembly shapes on photoelectrochemical properties and ultrasensitive biosensing behaviors toward dopamine

In this study, a photoelectrochemical (PEC) sensor based on perylene diimide derivatives (PDIs) was developed for the ultrasensitive quantification of dopamine (DA). PDIs were able to form self-assembled semiconductor nanostructures by strong π-π stacking, suitable for photoactive substances. Moreover, the shape of the PDI significantly affected the PEC properties of these nanostructures. The results showed that amino PDI with two-dimensional (2D) wrinkled layered nanostructures exhibited superior PEC properties relative to one-dimensional (1D) nanorods and fiber-based nanostructures (methyl and carboxyl PDIs). Based on these results, a mechanism for PEC sensor action was then proposed. The presence of 2D amino-PDI resulted in accelerated charge separation and transport. Furthermore, dopamine acted as effective electron donor to cause an increase in photocurrent. The as-obtained sensor was then used to detect small molecules like DA. A blue light optimized sensor at an applied potential of 0.7 V showed a detection limit of 1.67 nM with a wide linear range of 5 nM to 10 μM. On the other hand, the sensor presented acceptable reliability in determining DA in real samples. A recovery rate between 97.99 and 101.0% was obtained. Overall, controlling the morphology of semiconductors can influence PEC performance, which is a useful finding for the future development of PEC sensors.

Advanced growth of 2D MXene for electrochemical sensors

Over the last few years, electroanalysis has made significant advancements, particularly in developing electrochemical sensors. Electrochemical sensors generally include emerging Photoelectrochemical and Electrochemiluminescence sensors, which combine optical techniques and traditional electrochemical bio/non-biosensors. Numerous EC-detecting methods have also been designed for commercial applications to detect biological and non-biological markers for various diseases. Analytical applications have recently focused significantly on one of the novel nanomaterials, the MXene. This material is being extensively investigated for applications in electrochemical sensors due to its unique mechanical, electronic, optical, active functional groups and thermal characteristics. This study extensively discusses the salient features of MXene-based electrochemical sensors, photoelectrochemical sensors, enzyme-based biosensors, immunosensors, aptasensors, electrochemiluminescence sensors, and electrochemical non-biosensors. In addition, their performance in detecting various substances and contaminants is thoroughly discussed. Furthermore, the challenges and prospects the MXene-based electrochemical sensors are elaborated.

Ultrasensitive photoelectrochemical biosensor for DNA 5-methylcytosine analysis based on co-sensitization strategy combined with bridged DNA nanoprobe

Altered DNA methylation in the form of 5-methylcytosine (5-mC) patterns is correlated with disease diagnosis, prognosis, and treatment response. Therefore, accurate analysis of 5-mC is of great significance for the diagnosis of diseases. Here, an efficient enhanced photoelectrochemical (PEC) biosensor was designed for the quantitative analysis of DNA 5-mC based on a cascaded energy level aligned co-sensitization strategy coupling with the bridged DNA nanoprobe (BDN). Firstly, Au nanoparticle/graphite phase carbon nitride/titanium dioxide (AuNPs/g-C₃N₄@TiO₂) nanocomposite was synthesized through in situ growth of AuNPs on g-C₃N₄@TiO₂ surface as a matrix to provide a stable background signal. Next, BDN with a high mass transfer rate synthesized from a pair of DNA tetrahedral as nanomechanical handles was used as a capture probe to bind to the target sequence. The polydopamine nanosphere was applied to load with CdTe QDs (PDANS-CdTe QDs) as a photocurrent label of 5-mC antibodies. When the 5-mC existed, a large number of PDANS-Ab-CdTe QDs were introduced to the electrode surface, the formed CdTe QDs/AuNPs/g-C₃N₄@TiO₂ co-sensitive structure could effectively enhance the electron transfer capability and photocurrent response rate due to the effective cascade energy level arrangement, leading to a significantly enhanced photocurrent signal. The proposed PEC biosensor manifested a wide range from 10^-17 M to 10^-7 M and a detection limit of 2.2 aM. Meanwhile, the excellent performance indicated the practicability of the designed strategy, thus being capable of the clinical diagnosis of 5-mC.

Plasmonic heterostructure Bi2S3/Ti3C2 with continuous photoelectron injection mediated near-infrared self-powered photoelectrochemical sensing

Herein, a novel near-infrared (NIR) self-powered photoelectrochemical platform was constructed based on nonmetallic plasmon Ti₃C₂ MXene coupled with sulphur vacancy engineered Bi₂S₃. The continuous photoelectron injection from Bi₂S₃ to Ti₃C₂ MXene induced a stable SPR effect and high photoelectric conversion efficiency, which is beneficial for developing high-performance NIR self-powered biosensors. As a proof of concept, a sensitive NIR self-powered sensor was constructed by conjunction with an aptamer using Microcystin-RR as a model analyte, which is one of the most common and toxic hepatotoxins released by cyanobacteria.

A fluorescent biosensor based on exponential amplification reaction-initiated CRISPR/Cas12a (EIC) strategy for ultrasensitive DNA methyltransferase detection

DNA methyltransferase (DNA MTase) catalyzes the process of DNA methylation, and the aberrant DNA MTase activity is closely associated with cancer incidence and progression. Inspired by the exponential amplification reaction (EXPAR) characteristics, we developed an EXPAR-initiated CRISPR/Cas12a (EIC) strategy for sensitively detecting DNA MTase activity. A hairpin probe (HP) was designed with a palindromic sequence in the stem as substrate and NH₂-modified 3' end to prevent nonspecific amplification. HP could be methylated by DNA adenine methyltransferase (Dam MTase) and then digested by DpnI to generate an oligonucleotide that can serve as an EXPAR primer. With the assistance of Nt.BstNBI nicking enzyme and Vent(exo-) polymerase, this primer bound to template and induced EXPAR. Interestingly, the product of Cycle 1 in EXPAR can function as primer to initiate Cycle 2. Both EXPAR products can further activate the collateral cleavage of CRISPR/Cas12a-crRNA, resulting in the fragmentation of fluorescence reporters and fluorescence recovery. Due to the highly efficient amplification (about 5 times signal-to-noise of SDA) and the robust trans-cleavage of CRISPR/Cas12a, the EIC system owned an extreme limit of detection (LOD) of 2 × 10^-4 U/mL and a broad detection range from 2 × 10^-4 to 10 U/mL for Dam MTase. In addition, this method has succeeded in inhibitor screening and evaluation, showing magnificent promise in drug discovery and cancer therapy.

Sensitive bioanalytical methods for telomerase activity detection: a cancer biomarker

Telomerase is an enzyme that protects the length of telomeres by adding guanine-rich repetitive sequences. In tumors, gametes, and stem cells, telomerase activity is exerted. Telomerase activity can be a cancer biomarker for therapeutic and diagnosis approaches. So, a number of studies concentrating on the discovery of telomerase activity were reported. Bioanalytical devices, in comparison with other tests, have numerous advantages including low expense, simplicity, and excellent sensitivity and specificity. In this article we reviewed recent studies on the subject of various bioanalytical methods based on different nanomaterials. Optical, electrochemical, and quartz crystal microbalance (QCM) are prominent analytical techniques that are mentioned in this paper.

New Horizons for MXenes in Biosensing Applications

Over the last few decades, biosensors have made significant advances in detecting non-invasive biomarkers of disease-related body fluid substances with high sensitivity, high accuracy, low cost and ease in operation. Among various two-dimensional (2D) materials, MXenes have attracted widespread interest due to their unique surface properties, as well as mechanical, optical, electrical and biocompatible properties, and have been applied in various fields, particularly in the preparation of biosensors, which play a critical role. Here, we systematically introduce the application of MXenes in electrochemical, optical and other bioanalytical methods in recent years. Finally, we summarise and discuss problems in the field of biosensing and possible future directions of MXenes. We hope to provide an outlook on MXenes applications in biosensing and to stimulate broader interests and research in MXenes across different disciplines.

Molecularly Imprinted Polymer Functionalized Bi2S3/Ti3C2TX MXene Nanocomposites for Photoelectrochemical/Electrochemical Dual-Mode Sensing of Chlorogenic Acid

We report the proof-of-concept of molecularly imprinted polymer (MIP) functionalized Bi2S3/Ti3C2TX MXene nanocomposites for photoelectrochemical (PEC)/electrochemical (EC) dual-mode sensing of chlorogenic acid (CGA). Specifically, the in-situ growth of the Bi2S3/Ti3C2TX MXene served as a transducer substrate for molecularly imprinted polymers such as PEC and EC signal generators, due to its high surface area, suitable bandwidth and abundant active sites. In addition, the chitosan as a binder was encapsulated into MIP by means of phase inversion on a fluorine-doped tin dioxide (FTO) electrode. In the determination of CGA as an analytical model, the dual-mode sensor based on MIP functionalized Bi2S3/Ti3C2TX MXene nanocomposites had good selectivity, excellent stability and acceptable reproducibility, which displayed a linear concentration range from 0.0282 μM to 2824 μM for the PEC signal and 0.1412 μM to 22.59 μM for the EC signal with a low detection limit of 2.4 nM and 43.1 nM, respectively. Importantly, two dual-response mode with different transduction mechanisms could mutually conform to dramatically raise the reliability and accuracy of detection compared to single-mode detection. This work is a breakthrough for the design of dual-mode sensors and will provide a reasonable basis for the construction of dual-mode sensor platforms.

In-Situ Fabricating V2O5/TiO2-Carbon Heterojunction from Ti3C2 MXene as Highly Active Visible-Light Photocatalyst

Titanium dioxide is a mainstream photocatalyst, but it still confronts great obstacles of poor visible light absorption and rapid recombination rate of photogenerated carriers. Herein, we describe the design of a highly active visible-light photocatalytic system of graphited carbon layers anchored V2O5/TiO2 heterojunctions derived from Ti3C2 MXene, which demonstrates about 4.58 and 2.79 times higher degradation activity of MB under visible light (λ > 420 nm) than pure V2O5 and TiO2-carbon. Combined with the characterization results, the formed V2O5/TiO2 heterojunction promotes the separation of photogenerated carriers, while the graphitized carbon derived from MXene acts as an electronic reservoir to enhance the absorption of visible light. The ESR results show that superoxide radicals and hydroxyl radicals are the main active species in the reaction system. Therefore, we propose a possible mechanism model to provide a feasible idea for the subsequent design of high-efficiency photocatalysts for environmental treatment.

Boosted CO2 photoreduction performance on Ru-Ti3CN MXene-TiO2 photocatalyst synthesized by non-HF Lewis acidic etching method

Photocatalytic CO₂ reduction to produce value-added products is considered a promising solution to solve the global energy crisis and the greenhouse effect. In this study, Ti₃CN MXene was synthesized using a Lewis acidic etching method without the usage of toxic hydrofluoric acid (HF). Ti₃CN MXene was then used as a support for the in situ hydrothermal growth of TiO₂ and Ru nanoparticles. In the presence of 0.5 wt% Ru, Ru-Ti₃CN-TiO₂ shows CO and CH₄ production rates of 99.58 and 8.97 μmol/g, respectively, in 5 h under Xenon lamp irradiation, more than 20.5 and 9.3 times that of commercial P25. The enhancement in photocatalytic activity was attributed to the synergy between the in-situ growth of TiO₂ on Ti₃CN MXene and Ru nanoparticles. It was proven experimentally that Ti₃CN MXene can provide abundant pathways for electron transfer. The separation and transfer of the photo-induced charge were further increased with the help of Ru and Ti₃CN MXene, leaving more electrons to participate in the subsequent CO₂ reduction reaction. We believe that this work will encourage more attention to designing environment-friendly MXene-based photocatalysts for CO₂ photoreduction using the non-HF method.

Simple preparation of in-situ oxidized titanium carbide MXene for photocatalytic degradation of catechol

Photocatalytic system has been widely applied to treat the highly toxic and refractory aromatics sewage water pollution problem. However, developing highly active and excellent durability photocatalysts is always the long-term...

Electrochemical and optical biosensors based on multifunctional MXene nanoplatforms: Progress and prospects

Two-dimensional (2D) transition metal carbides, carbonitrides, and nitrides (MXene) have emerged as a rising family of atomic layered nanomaterials which undergoes intensive investigations in interdisciplinary applications. The large surface-to-volume ratio, excellent mechanical strength, desirable biocompatibility, along with tunable electronic and optical properties, render 2D MXenes exceptional attractive as versatile nanoplatforms for biosensing. Herein, advanced progress and novel paradigms of MXene-based biosensors are reviewed, focusing on the combination of MXenes with various detection techniques that promotes target recognition and signal transducing. Regarding the nature of transducing signals, MXene-based biosensors are categorized into two groups where MXenes serve as electrical platforms or optical platforms, respectively. The merits of MXenes are critically compared with other 2D materials to illustrate the distinctive advantages of MXenes in biosensing, while challenges such as environmental vulnerability was discussed to guide the sensor design. Facing with the rapid development of wearable electronics and internet of medical things, as well as escalating demanding in precision medicine, perspectives are provided to elucidate the potential of MXenes in propelling advances in these trending biomedical applications.

The TDs/aptamer cTnI biosensors based on HCR and Au/Ti3C2-MXene amplification for screening serious patient in COVID-19 pandemic

The accurate assay of cardiac troponin I (cTnI) is very important for acute myocardial infarction (AMI), it also can be employed as an effective index for screening serious patients in COVID-19 pandemic before fatal heart injury to reduce the mortality. A ratiometric sensing strategy was proposed based on electrochemiluminescent (ECL) signal of doxorubicin (Dox)-luminol or the electrochemical (EC) signal of methylene blue (MB) vs. referable EC signal of Dox. The bio-recognitive Tro4-aptamer ensures the high specificity of the sensor by affinity binding to catch cTnI, and the tetrahedral DNA (TDs) on Au/Ti₃C₂-MXene built an excellent sensing matrix. An in situ hybrid chain reaction (HCR) amplification greatly improved the sensitivity. The ratiometric sensing responses ECL_Dox-luminol/Current_Dox or Current_MB/Current_Dox linearly regressed to cTnI concentration in the range of 0.1 fM-1 pM or 0.1 fM-500 fM with the limit of detection (LOD) as 0.04 fM or 0.1 fM, respectively. Served as the reference signal, Current_Dox reflected the variation of sensor, it is very effective to ensure the accuracy of detection to obviate the false results. The proposed biosensors show good specificity, sensitivity, reproducibility and stability, have been applied to determine cTnI in real samples with satisfactory results. They are worth looking forward to be used for screening serious patient of COVID-19 to reduce the mortality, especially in mobile cabin hospital.

A photoelectrochemical biosensor based on SnO2 nanoparticles for phosphatidylcholine detection in soybean oil

A photoelectrochemical (PEC) biosensor based on SnO₂ nanoparticles (SnO₂ NPs) was developed and applied for phosphatidylcholine (PC) detection in soybean oil. SnO₂ NPs were grown on an indium tin oxide (ITO) electrode, polythionine (PTh) was electropolymerized on the surface of ITO/SnO₂ NPs, and choline oxidase (ChO_x) was immobilized to prepare the ITO/SnO₂ NPs/PTh/ChO_x electrode. The developed PEC biosensor can detect PC under visible light irradiation. The experimental conditions for PC detection were as follows: 1.8 mg mL^-1 ChO_x concentration, 0.5 V bias voltage, 18 mW cm^-2 light intensity, and pH 6. The PEC biosensor had a detection limit of 0.005 mM (S/N = 3) and a detection range from 0.03 mM to 4 mM. This PEC biosensor based on SnO₂ NPs was applied to detect PC in soybean oil. The recovery rate tested by the standard addition method was 95.2-107.4%. These findings were consistent with the results obtained by high-performance liquid chromatography (HPLC). Therefore, the proposed PEC biosensor based on SnO₂ NPs has excellent reproducibility, stability, and great potential applications in the PEC analysis of PC in soybean oil.

Sensitive Dual-Mode Biosensors for CYFRA21-1 Assay Based on the Dual-Signaling Electrochemical Ratiometric Strategy and "On-Off-On" PEC Method

Herein, an electrochemical (EC)-photoelectrochemical (PEC) dual-mode biosensor was constructed for cytokeratin 19 fragment 21-1 (CYFRA21-1) assay based on the dual-signaling electrochemical ratiometric strategy and "on-off-on" PEC method. The indium tin oxide (ITO) electrode was modified by 3,4,9,10-perylenetetracarboxylic dianhydride (PTCDA)@C₆₀ and gold nanoparticles (Au NPs), and the double-stranded DNA composed of thiol/methylene blue (MB)-labeled single-stranded DNA (ssDNA) (S0-MB) and antibody/ferrocene (Fc)-labeled ssDNA (Ab1-S1-Fc) was immobilized on the Au NPs/PTCDA@C₆₀/ITO electrode via the Au-S bond between Au NPs and thiol of S0-MB. With the help of another antibody-labeled ssDNA (Ab2-S2), the presence of CYFRA21-1 triggered a typical antigen-antibody sandwich immune reaction (Ab1, CYFRA21-1, and Ab2) and proximity hybridization between Ab1-S1-Fc and Ab2-S2. This caused the release of Ab1-S1-Fc from the modified electrode and the change of S0-MB to a hairpin structure, resulting in a decrease (an increase) of the oxidation peak current of Fc (MB) and an increase of the photocurrent due to the enhancing (inhibiting) effect of MB (Fc) on the photoelectric performance of the Au NPs/PTCDA@C₆₀/ITO electrode. Thus, CYFRA21-1 was detected by the developed EC-PEC dual-mode sensing platform sensitively, and the linear response ranges of 0.001-40 ng/mL with a detection limit of 0.3 pg/mL for the EC technique and 0.0001-4 ng/mL with a detection limit of 0.03 pg/mL for the PEC method were obtained. Furthermore, by changing the specific antibodies of disease-related biomarkers, the developed dual-mode biosensing platform could be readily extended to detect other antigens, implying its great potential applications in biological analysis and early disease diagnosis.

Epoxy-functionalized macroporous carbon with embedded platinum nanoparticles for electrochemical detection of telomerase activity via telomerase-triggered catalytic hairpin assembly

Telomerase is regarded as a crucial biomarker for the early diagnosis of malignant tumors and a valuable therapeutic target. In this work, a telomerase-triggered amplification strategy was designed on the basis of a catalyzed hairpin assembly (CHA) for bridging a signal probe of platinum nanoparticles (Pt NPs) anchored on three-dimensional (3D) epoxy-functionalized macroporous carbon (Pt/MPC-COOH) in an ultrasensitive electrochemical biosensor. Pt/MPC-COOH nanomaterials with interconnected macroporous structure not only immobilized hairpin DNA probe 2 (H2) via an amide reaction (Pt/MPC-COOH-H2), but they also generated an obvious electrochemical signal in response to acetaminophen (AP) oxidation. After the introduction of telomerase, telomerase primer (TP) was extended to a telomerase extension product (TEP) with several hexamer repeats (TTAGGG)n to initiate the CHA cycle, leading to signal amplification. Subsequently, with the TEP-triggered CHA cycle amplification strategy, a large amount of Pt/MPC-COOH-H2 was introduced on the electrode surface for the construction of the electrochemical platform, which realized the sensitive detection of telomerase activity from 10² to10⁷ cells mL^-1 with a limit of detection (LOD) of 9.02 cells mL^-1. This strategy provides a sensitive method for the detection of biomolecules that could be useful for bioanalysis and early clinical diagnoses of diseases.

Oxidized titanium carbide MXene-enabled photoelectrochemical sensor for quantifying synergistic interaction of ascorbic acid based antioxidants system

Antioxidants can protect organization from damage by scavenging of free radicals. When two kinds of antioxidants are consumed together, the total antioxidant capacity might be enhanced via synergistic interactions. Herein, we develop a simple, direct, and effective strategy to quantify the synergistic interaction between ascorbic acid (AA) and other different antioxidants by photoelectrochemical (PEC) technology. MXene Ti₃C₂-TiO₂ composites fabricated via hydrogen peroxide oxidation were applied as sensing material for the antioxidants interaction study. Under excitation of 470 nm wavelength, the photogenerated electrons transfer from the conduction band of TiO₂ nanoparticles to the Ti₃C₂ layers, and the holes in TiO₂ can oxidize antioxidants, leading to an enhanced photocurrent as the detection signal. This PEC sensor exhibits a good linear range to AA concentrations from 12.48 to 521.33 μM as well as obvious antioxidants capability synergism. In particular, the photocurrents of AA + gallic acid (GA) and AA + chlorogenic acid (CHA) mixtures at 476.19 μM increase 1.95 and 2.35 times respectively comparing with the sum of photocurrents of AA and GA or CHA. It is found that the synergistic effect is mainly depending on the fact that AA with the low redox potential (0.246 V vs NHE) can reduce other antioxidants radical to promote regeneration, improving the overall antioxidant performance. Moreover, it is proved that the greater redox potential of antioxidants, the more obvious the synergistic effect. In addition, the sensor was used to real sample assay, which provides available information towards food nutrition analysis, health products design and quality inspection.