Acid Catalysis Mediated by Aqueous Hydronium Ions Formed by Contacting Zeolite Crystals with Liquid Water

Zeolites are crystalline microporous aluminosilicates widely used as solid acids in catalytic routes to clean and sustainable energy carriers and chemicals from biogenic and fossil feedstocks. This study addresses how zeolites act as weak polyprotic acids and dissociate to form extra-crystalline hydronium (H3O+) ions in liquid water. The extent of their dissociation depends on the energy required to form the conjugate framework anions, which becomes unfavorable as the extent of dissociation increases intracrystalline charge densities because repulsive interactions ultimately preclude the detachment of all protons as catalytically relevant H3O+(aq) ions. The extent of dissociation is accurately described using electrostatic repulsion formalisms that account for aqueous H3O+ concentrations for all zeolite concentrations, Al densities, and frameworks. Probed by hydrolysis of cellulose, the most abundant biogenic polymer, this study demonstrates that zeolites catalyze this reaction exclusively through the formation of the extra-crystalline H3O+ ions at rates strictly proportional to their concentrations in the aqueous phase, irrespective of their provenance from zeolites differing in framework structure or Al content, without the purported involvement of acid sites at extracrystalline surfaces or intervening formation of smaller cellulose oligomers. The results and mechanistic interpretations seamlessly and rigorously bridge the chemistry of solid and liquid acids in aqueous media, while resolving the enduring puzzle of solid acids that catalyze transformations of substrates that cannot enter the voids where acid sites reside.

Advances and challenges in designing active site environments in zeolites for Brønsted acid catalysis

Zeolites contain proton active sites in diverse void environments that stabilize the reactive intermediates and transition states formed in converting hydrocarbons and oxygenates to chemicals and energy carriers. The catalytic diversity that exists among active sites in voids of varying sizes and shapes, even within a given zeolite topology, has motivated research efforts to position and quantify active sites within distinct voids (synthesis-structure) and to link active site environment to catalytic behavior (structure-reactivity). This Feature Article describes advances and challenges in controlling the position of framework Al centers and associated protons within distinct voids during zeolite synthesis or post-synthetic modification, in identifying and quantifying distinct active site environments using characterization techniques, and in determining the influence of active site environments on catalysis. During zeolite synthesis, organic structure directing agents (SDAs) influence Al substitution at distinct lattice positions via intermolecular interactions (e.g., electrostatics, hydrogen bonding) that depend on the size, structure, and charge distribution of organic SDAs and their mobility when confined within zeolitic voids. Complementary post-synthetic strategies to alter intrapore active site distributions include the selective removal of protons by differently-sized titrants or unreactive organic residues and the selective exchange of framework heteroatoms of different reactivities, but remain limited to certain zeolite frameworks. The ability to identify and quantify active sites within distinct intrapore environments depends on the resolution with which a given characterization technique can distinguish Al T-site positions or proton environments in a given zeolite framework. For proton sites in external unconfined environments, various (post-)synthetic strategies exist to control their amounts, with quantitative methods to distinguish them from internal sites that largely depend on using stoichiometric or catalytic probes that only interact with external sites. Protons in different environments influence reactivity by preferentially stabilizing larger transition states over smaller precursor states and influence selectivity by preferentially stabilizing or destabilizing competing transition states of varying sizes that share a common precursor state. We highlight opportunities to address challenges encountered in the design of active site environments in zeolites by closely integrating precise (post-)synthetic methods, validated characterization techniques, well-defined kinetic probes, and properly calibrated theoretical models. Further advances in understanding the molecular details that underlie synthesis-structure-reactivity relationships for active site environments in zeolite catalysis can accelerate the predictive design of tailored zeolites for desired catalytic transformations.

Multilevel quantum mechanical calculations show the role of promoter molecules in the dehydration of methanol to dimethyl ether in H-ZSM-5

Methyl carboxylate esters promote the formation of dimethyl ether (DME) from the dehydration of methanol in H-ZSM-5 zeolite. We employ a multilevel quantum method to explore the possible associative and dissociative mechanisms in the presence, and absence, of six methyl ester promoters. This hybrid method combines density functional theory, with dispersion corrections (DFT-D3), for the full periodic system, with second-order Møller-Plesset perturbation theory (MP2) for small clusters representing the reaction site, and coupled cluster with single, double, and perturbative triple substitution (CCSD(T)) for the reacting molecules. The calculated adsorption enthalpy of methanol, and reaction enthalpies of the dehydration of methanol to DME within H-ZSM-5, agree with experiment to within chemical accuracy (∼4 kJ mol-1). For the promoters, a reaction pathway via an associative mechanism gives lower overall reaction enthalpies and barriers compared to the reaction with methanol only. Each stage of this mechanism is explored and related to experimental data. We provide evidence that suggests the promoter's adsorption to the Brønsted acid site is the most important factor dictating its efficiency.

Controlling product selectivity and catalyst lifetime by altering acid strength, cavity size of SAPO, and diffusion rate of methanol in the MTO reaction: DFT and MD calculations

The initiation mechanisms of the MTO process over silicoaluminophosphate (SAPO) catalysts with zeolite-like structures using first-principles calculations have been investigated. The supramolecular system of silicoaluminophosphates consisting of inorganic cages with Brønsted acid sites and trapped organic compounds was used as a catalyst in the MTO reaction. To study the structure-property relationship in more detail, the effect of acidity and cage size of different types of SAPOs (SAPO-18, SAPO-34, and SAPO-17 with CHA, AEI, and ERI structures, respectively) in the aromatic cycle of hydrocarbon pool mechanism was investigated. The differences in reaction barriers can be explained by the cage size, pore topology, and environment of framework protons of materials. Product selectivity was controlled by using cavity-type zeolite, the steric constraint of the cavity for the formation of critical intermediates, and acidic strength. The results show that ethylene selectivity increases as the cavity size decreases, and the elliptical pore size of the structures decreases, thereby decreasing the acidity of the zeolite structure, leading to an increase in propylene selectivity. SAPO-18 exhibits the longest reaction lifetime and has the highest amount of carbonaceous material after reaction completion. SAPO-17 with small pore and cavity size is selective to ethylene, although it shows a rapid catalyst deactivation rate.

Unveiling the mechanisms of carboxylic acid esterification on acid zeolites for biomass-to-energy: A review of the catalytic process through experimental and computational studies

In recent years, there has been significant interest from industrial and academic areas in the esterification of carboxylic acids catalyzed by acidic zeolites, as it represents a sustainable and economically viable approach to producing a wide range of high-value-added products. However, there is a lack of comprehensive reviews that address the intricate reaction mechanisms occurring at the catalyst interface at both the experimental and atomistic levels. Therefore, in this review, we provide an overview of the esterification reaction on acidic zeolites based on experimental and theoretical studies. The combination of infrared spectroscopy with atomistic calculations and experimental strategies using modulation excitation spectroscopy techniques combined with phase-sensitive detection is presented as an approach to detecting short-lived intermediates at the interface of zeolitic frameworks under realistic reaction conditions. To achieve this goal, this review has been divided into four sections: The first is a brief introduction highlighting the distinctive features of this review. The second addresses questions about the topology and activity of different zeolitic systems, since these properties are closely correlated in the esterification process. The third section deals with the mechanisms proposed in the literature. The fourth section presents advances in IR techniques and theoretical calculations that can be applied to gain new insights into reaction mechanisms. Finally, this review concludes with a subtle approach, highlighting the main aspects and perspectives of combining experimental and theoretical techniques to elucidate different reaction mechanisms in zeolitic systems.

Ion-Sieve-Confined Synthesis of Size-Tunable Ru for Electrochemical Hydrogen Evolution

The controllable and low-cost synthesis of nanometal particles is highly desired in scientific and industrial research. Herein, size-tunable Ru nanoparticles were synthesized by using a novel ion-sieve-confined reduction method. The H2TiO3 ion-sieve was used to adsorb Ru3+ into the hydroxyl-enriched porous [TiO3]2- layers. The confined environment of the interlayer space facilitates Ru-Ru collision and bonding during annealing, achieving a precise reduction from Ru3+ to Ru0 without additional reductants. Owing to the confinement effect, Ru0 nanoparticles are uniformly embedded in the pores on the surface of the postannealed TiO2 matrix (Ru@TiO2). Ru@TiO2 exhibited a lower overpotential than Pt/C (57 vs 87 mV at 10 mA cm-2) for the HER in 0.1 M KOH solution. The confinement-induced reduction of metal ions was also preliminarily proved in ion-exchanged zeolites, which provides facile and abundant approaches for the size-controllable synthesis of nanometal catalysts with high catalytic activity.

Theoretical Assessment of the Mechanism and Active Sites in Alkene Dimerization on Ni Monomers Grafted onto Aluminosilicates: (Ni-OH)+ Centers and C-C Coupling Mediated by Lewis Acid-Base Pairs

Ni-based solids are effective catalysts for alkene dimerization, but the nature of active centers and identity and kinetic relevance of bound species and elementary reactions remain speculative and based on organometallic chemistry. Ni centers grafted onto ordered MCM-41 mesopores lead to well-defined monomers that are rendered stable by the presence of an intrapore nonpolar liquid, thus enabling accurate experimental inquiries and indirect evidence for grafted (Ni-OH)⁺ monomers. Density functional theory (DFT) treatments presented here confirm the plausible involvement of pathways and active centers not previously considered as mediators of high turnover rates for C₂-C₄ alkenes at cryogenic temperatures. (Ni-OH)⁺ species act as Lewis acid-base pairs that stabilize C-C coupling transition states by polarizing two alkenes in opposite directions via concerted interactions with the O and H atoms in these pairs. DFT-derived activation barriers for ethene dimerization (59 kJ mol^-1) are similar to measured values (46 ± 5 kJ mol^-1) and the weak binding of ethene on (Ni-OH)⁺ is consistent with kinetic trends that require sites to remain essentially bare at subambient temperatures and high alkene pressures (1-15 bar). DFT treatments of classical metallacycle and Cossee-Arlman dimerization routes (Ni⁺ and Ni²⁺-H grafted onto Al-MCM-41, respectively) show that such sites bind ethene strongly and lead to saturation coverages, in contradiction with observed kinetic trends. These C-C coupling routes at acid-base pairs in (Ni-OH)⁺ differ from molecular catalysts in (i) the type of elementary steps; (ii) the nature of active centers; and (iii) their catalytic competence at subambient temperatures without requiring co-catalysts or activators.

Role of Chiral Skeleton in Chiral Phosphoric Acids Catalyzed Asymmetric Transfer Hydrogenation: A DFT Study

Chiral phosphoric acids (CPAs) have received considerable attention due to their high activity for enantioselective transformations. However, the role of various chiral skeletons of CPAs in regulating the mechanism and enantioselectivity of asymmetric transfer hydrogenation has remained unclear. Density functional theory (DFT) calculations are performed to elucidate the role of chiral skeletons on the acidity, mechanism, enantioselectivity, and kinetic stabilities of transition states (TSs) in Asymmetric Transfer Hydrogen (ATH) reaction catalyzed by five CPAs. We found that the acidity of CPAs is strongly dependent on the chiral skeleton. The origin of enantioselectivity of ATH reaction arises from the differential noncovalent interactions between TSs and CPAs. Moreover, the shape and size of the catalyst pocket depending on chiral skeletons play key roles in the stability of TSs and the enantioselectivity of ATH. This study might facilitate to design and computationally screening of CPAs and guide the strategic choice of CPA skeletons to reduce the experimental workload.

Catalytic production and application of bio-renewable butyl butyrate as jet fuel blend- A review

Butyl butyrate (BB) derived from bio-renewable resources is the most promising jet fuel blend. This review highlights essential properties of jet fuel, including calorific value, kinematic viscosity, freezing point, flash point, auto-ignition temperature, and density to compare with different bio-renewable chemicals, which are compatible to be blended with the jet fuel. A detailed discussion follows on the importance of intermediate formation, reaction mechanism, and catalyst properties that are critical towards the production of bio-renewable resource-derived BB. BB is primarily produced via the esterification of butyric acid (BA) in butanol (BuOH) with or without using a catalyst. The corresponding reactions are carried out in both homogeneous and heterogeneous phases, provided it has acidic properties. Thus, a wide range of acidic catalysts such as [HSO₃-pmim] HSO₄ ionic liquids, heteropolyacid, methanesulfonic acid, Dowex 50 Wx8-400 resins, and sulfonated char causes up to 98%, 97.9%, 93.2%, 95.3%, and 90% of BB yield, respectively are critically reviewed. Moreover, reaction mechanism, product, and by-product formation that primarily dictate the BB yield and selectivity have been comprehensively reviewed. In addition, catalytic and mechanistic insights on BB production from other bio-renewable resources such as butyric anhydride, butyraldehyde, dibutyl ether, and methanol have been discussed in this review.

What Is Being Measured with P-Bearing NMR Probe Molecules Adsorbed on Zeolites?

Elucidating the nature, strength, and siting of acid sites in zeolites is fundamental to fathom their reactivity and catalytic behavior. Despite decades of research, this endeavor remains a major challenge. Trimethylphosphine oxide (TMPO) has been proposed as a reliable probe molecule to study the acid properties of solid acid catalysts, allowing the identification of distinct Brønsted and Lewis acid sites and the assessment of Brønsted acid strengths. Recently, doubts have been raised regarding the assignment of the ³¹P NMR resonances of TMPO-loaded zeolites. Here, it is shown that a judicious control of TMPO loading combined with two-dimensional ¹H-³¹P HETCOR solid-state NMR, DFT, and ab initio molecular dynamics (AIMD)-based computational modeling provides an unprecedented atomistic description of the host-guest and guest-guest interactions of TMPO molecules confined within HZSM-5 molecular-sized voids. ³¹P NMR resonances usually assigned to TMPO molecules interacting with Brønsted sites of different acid strength arise instead from both changes in the probe molecule confinement effects at ZSM-5 channel system and the formation of protonated TMPO dimers. Moreover, DFT/AIMD shows that the ¹H and ³¹P NMR chemical shifts strongly depend on the siting of the framework aluminum atoms. This work overhauls the current interpretation of NMR spectra, raising important concerns about the widely accepted use of probe molecules for studying acid sites in zeolites.

Recent Advances in Catalytic Confinement Effect within Micro/Meso-Porous Crystalline Materials

Micro/meso-porous crystalline materials with a well-defined pore structure, such as zeolites, carbon nanotubes, and metal-organic frameworks, are of great significance in the development of catalytic systems for scientific and industrial demands. The confinement effect aroused by pore features of porous crystalline materials has triggered great interest in heterogeneous catalysis. Catalytic reactions in confined spaces exhibit unique behaviors compared to those observed on bulk materials. More interestingly, chemical reactivity can be modulated in different ways by the confinement effect, despite the fact that the mechanism on how the confinement effect changes the reaction remains unclear. In this review, a systematic discussion and fundamental understanding is provided concerning the concept of confinement effect, highlighting the impact of confinement effects on diffusion, adsorption/desorption, and catalytic reaction in typical micro/meso-porous crystalline materials, including zeolites, carbon nanotubes, and metal-organic frameworks. Relevant studies demonstrate that confinement effect affords not only shape selectivity against reactants/products, but also modulates surface electron distribution of active species confined within porous environments, thereby successively affecting the catalytic reactivity, selectivity, and stability. This review provides a useful guide for researchers attempting to design excellent porous crystalline catalysts based on the concept of confinement effect in heterogeneous catalysis.

Inhibition of Mitochondrial ATP Synthesis and Regulation of Oxidative Stress Based on {SbW8 O30 } Determined by Single-Cell Proteomics Analysis

The 10-nuclear heteroatom cluster modified {SbW₈ O₃₀ } was successfully synthesized and exhibited inhibitory activity (IC₅₀ =0.29 μM). Based on proteomics analysis, Na₄ Ni₂ Sb₂ W₂ -SbW₈ inhibited ATP production by affecting the expression of 16 related proteins, hindering metabolic functions in vivo and cell proliferation due to reactive oxygen species (ROS) stress. In particular, the low expression of FAD/FMN-binding redox enzymes (relative expression ratio of the experimental group to the control=0.43843) could be attributed to the redox mechanism of Na₄ Ni₂ Sb₂ W₂ -SbW₈ , which was consistent with the effect of polyoxometalates (POMs) and FMN-binding proteins on ATP formation. An electrochemical study showed that Na₄ Ni₂ Sb₂ W₂ -SbW₈ combined with FMN to form Na₄ Ni₂ Sb₂ W₂ -SbW₈ -2FMN complex through a one-electron process of the W atoms. Na₄ Ni₂ Sb₂ W₂ -SbW₈ acted as catalase and glutathione peroxidase to protect the cell from ROS stress, and the inhibition rates were 63.3 % at 1.77 μM of NADPH and 86.06 % at 10.62 μM of 2-hydroxyterephthalic acid. Overall, our results showed that POMs can be specific oxidative/antioxidant regulatory agents.