Machine-Learning-Accelerated Surface Exploration of Reconstructed BiVO4(010) and Characterization of Their Aqueous Interfaces

Understanding the semiconductor-electrolyte interface in photoelectrochemical (PEC) systems is crucial for optimizing the stability and reactivity. Despite the challenges in establishing reliable surface structure models during PEC cycles, this study explores the complex surface reconstructions of BiVO4(010) by employing a computational workflow integrated with a state-of-the-art active learning protocol for a machine-learning interatomic potential and global optimization techniques. Within this workflow, we identified 494 unique reconstructed surface structures that surpass conventional chemical intuition-driven, bulk-truncated models. After constructing the surface Pourbaix diagram under Bi- and V-rich electrolyte conditions using density functional theory and hybrid functional calculations, we proposed structural models for the experimentally observed Bi-rich BiVO4 surfaces. By performing hybrid functional molecular dynamics simulations with the explicit treatment of water molecules on selected reconstructed BiVO4(010) surfaces, we observed water dissociation from molecular water. Our findings demonstrate significant water dissociation on reconstructed Bi-rich surfaces, highlighting the critical role of bare and undercoordinated Bi sites (only observable in reconstructed surfaces) in driving hydration processes. Our work establishes a foundation for understanding the role of complex, reconstructed Bi surfaces in surface hydration and reactivity. Additionally, our theoretical framework for exploring surface structures and predicting reactivity in multicomponent oxides offers a precise approach to describing complex surface and interface processes in PEC systems.

Red and near-infrared light-activated photoelectrochemical nanobiosensors for biomedical target detection

Photoelectrochemical (PEC) nanobiosensors integrate molecular (bio)recognition elements with semiconductor/plasmonic photoactive nanomaterials to produce measurable signals after light-induced reactions. Recent advancements in PEC nanobiosensors, using light-matter interactions, have significantly improved sensitivity, specificity, and signal-to-noise ratio in detecting (bio)analytes. Tunable nanomaterials activated by a wide spectral radiation window coupled to electrochemical transduction platforms have further improved detection by stabilizing and amplifying electrical signals. This work reviews PEC biosensors based on nanomaterials like metal oxides, carbon nitrides, quantum dots, and transition metal chalcogenides (TMCs), showing their superior optoelectronic properties and analytical performance for the detection of clinically relevant biomarkers. Furthermore, it highlights the innovative role of red light and NIR-activated PEC nanobiosensors in enhancing charge transfer processes, protecting them from biomolecule photodamage in vitro and in vivo applications. Overall, advances in PEC detection systems have the potential to revolutionize rapid and accurate measurements in clinical diagnostic applications. Their integration into miniaturized devices also supports the development of portable, easy-to-use diagnostic tools, facilitating point-of-care (POC) testing solutions and real-time monitoring.

Untangling the Effect of Carbonaceous Materials on the Photoelectrochemical Performance of BaTaO2N

The water oxidation reaction is a rate-determining step in solar water splitting. The number of surviving photoexcited holes is one of the most influencing factors affecting the photoelectrochemical water oxidation efficiency of photocatalysts. The solar-to-hydrogen energy conversion efficiency of BaTaO2N is still far below the benchmark efficiency set for practical applications, notwithstanding its potential as a 600 nm-class photocatalyst in solar water splitting. To improve its efficiency in photoelectrochemical water splitting, this study offers a straightforward route to develop photocatalytic materials based on the combination of BaTaO2N and carbonaceous materials with different dimensions. The impact of diverse carbonaceous materials, such as fullerene, g-C3N4, graphene, carbon nanohorns, and carbon nanotubes, on the photoelectrochemical behavior of BaTaO2N has been examined. Notably, the use of graphene and g-C3N4 remarkably improves the photoelectrochemical performance of the composite photocatalysts through a higher photocurrent and acting as electron reservoirs. Consequently, a marked reduction in recombination rates, even at low overpotentials, leads to a higher accumulation of photoexcited holes, resulting in 2.6- and 1.7-fold increased BaTaO2N photocurrent densities using graphene and g-C3N4, respectively. The observed trends in the dark for the oxygen reduction reaction (ORR) potential align with the increase in the photocurrent density, revealing a good correlation between opposite phenomena. Importantly, the enhancement observed implies an underlying accumulation phenomenon. The verification of this concept lies in the evidence provided by oxygen reduction and is in line with photoredox flux matching during photocatalysis. This research underscores the intricate interplay between carbonaceous materials and oxynitride photocatalysts, offering a strategic approach to enhancing various photocatalytic capabilities.

Dual-Plasmon Resonance Coupling Promoting Directional Photosynthesis of Nitrate from Air

Photocatalysis, particularly plasmon-mediated photocatalysis, offers a green and sustainable approach for direct nitrogen oxidation into nitrate under ambient conditions. However, the unsatisfactory photocatalytic efficiency caused by the limited localized electromagnetic field enhancement and short hot carrier lifetime of traditional plasmonic catalysts is a stumbling block to the large-scale application of plasmon photocatalytic technology. Herein, we design and demonstrate the dual-plasmonic heterojunction (Bi/Csx WO3 ) achieves efficient and selective photocatalytic N2 oxidation. The yield of NO3 - over Bi/Csx WO3 (694.32 μg g-1  h-1 ) are 2.4 times that over Csx WO3 (292.12 μg g-1  h-1 ) under full-spectrum irradiation. The surface dual-plasmon resonance coupling effect generates a surge of localized electromagnetic field intensity to boost the formation efficiency and delay the self-thermalization of energetic hot carriers. Ultimately, electrons participate in the formation of ⋅O2 - , while holes involve in the generation of ⋅OH and the activation of N2 . The synergistic effect of multiple reactive oxygen species drives the direct photosynthesis of NO3 - , which achieves the overall-utilization of photoexcited electrons and holes in photocatalytic reaction. The concept that the dual-plasmon resonance coupling effect facilitates the directional overall-utilization of photoexcited carriers will pave a new way for the rational design of efficient photocatalytic systems.

The state-of-the-art development of photocatalysts for the degradation of persistent herbicides in wastewater

Herbicides are one of the most recurring pollutants in the aquatic system due to their widespread usage in the agriculture sector for weed control. Semiconductor-based photocatalysts have gained recognition due to their ability to degrade and mineralize pollutants into harmless by-products completely. Lately, many studies have been done to design photocatalysts with efficient separation of photogenerated charge carriers and enhanced light absorption. Photocatalyst engineering through doping with metal and non-metal elements and the formation of heterojunction are proven effective for minimizing the recombination of electron-hole pairs and enlarging the absorption in the visible light region. This review focuses on discussing and evaluating the recent progress in the types of photocatalysts and their performance in the remediation of herbicides in wastewater. The development of innovative hybrid technologies is also highlighted. The limitations and challenges of photocatalysis technology in the present literature have been identified, and future studies are recommended.

Bismuth Oxyhalide-Based Materials (BiOX: X = Cl, Br, I) and Their Application in Photoelectrocatalytic Degradation of Organic Pollutants in Water: A Review

An important target of photoelectrocatalysis (PEC) technology is the development of semiconductor-based photoelectrodes capable of absorbing solar energy (visible light) and promoting oxidation and reduction reactions. Bismuth oxyhalide-based materials BiOX (X = Cl, Br, and I) meet these requirements. Their crystalline structure, optical and electronic properties, and photocatalytic activity under visible light mean that these materials can be coupled to other semiconductors to develop novel heterostructures for photoelectrochemical degradation systems. This review provides a general overview of controlled BiOX powder synthesis methods, and discusses the optical and structural features of BiOX-based materials, focusing on heterojunction photoanodes. In addition, it summarizes the most recent applications in this field, particularly photoelectrochemical performance, experimental conditions and degradation efficiencies reported for some organic pollutants (e.g., pharmaceuticals, organic dyes, phenolic derivatives, etc.). Finally, as this review seeks to serve as a guide for the characteristics and various properties of these interesting semiconductors, it discusses future PEC-related challenges to explore.

Detoxifying SARS-CoV-2 antiviral drugs from model and real wastewaters by industrial waste-derived multiphase photocatalysts

The use of antiviral drugs has surged as a result of the COVID-19 pandemic, resulting in higher concentrations of these pharmaceuticals in wastewater. The degradation efficiency of antiviral drugs in wastewater treatment plants has been reported to be too low due to their hydrophilic nature, and an additional procedure is usually necessary to degrade them completely. Photocatalysis is regarded as one of the most effective processes to degrade antiviral drugs. The present study aims at synthesizing multiphase photocatalysts by a simple calcination of industrial waste from ammonium molybdate production (WU photocatalysts) and its combination with WO₃ (WW photocatalysts). The X-ray diffraction (XRD) results confirm that the presence of multiple crystalline phases in the synthesized photocatalysts. UV-Vis diffuse reflectance spectra reveal that the synthesized multiphase photocatalysts absorb visible light up to 620 nm. Effects of calcination temperature of industrial waste (550-950 °C) and WO₃ content (0-100%) on photocatalytic activity of multiphase photocatalysts (WU and WW) for efficient removal of SARS-CoV-2 antiviral drugs (lopinavir and ritonavir) in model and real wastewaters are studied. The highest k₁ value is observed for the photocatalytic removal of ritonavir from model wastewater using WW4 (35.64 ×10^-2 min^-1). The multiphase photocatalysts exhibit 95% efficiency in the photocatalytic removal of ritonavir within 15 of visible light irradiation. In contrast, 60 min of visible light irradiation is necessary to achieve 95% efficiency in the photocatalytic removal of lopinavir. The ecotoxicity test using zebrafish (Danio rerio) embryos shows no toxicity for photocatalytically treated ritonavir-containing wastewater, and the contrary trend is observed for photocatalytically treated lopinavir-containing wastewater. The synthesized multiphase photocatalysts can be tested and applied for efficient degradation of other SARS-CoV-2 antiviral drugs in wastewater in the future.

Computational predictions of adaptive aromaticity for the design of singlet fission materials

The concept of adaptive aromaticity has been demonstrated as an alternative strategy for the design of singlet fission materials.

A Schottky-Barrier-Free Plasmonic Semiconductor Photocatalyst for Nitrogen Fixation in a "One-Stone-Two-Birds" Manner

Plasmonic photocatalysis has received much attention owing to attractive plasmonic enhancement effects in improving the solar-to-chemical conversion efficiency. However, the photocatalytic efficiencies have remained low mainly due to the short carrier lifetime caused by the rapid recombination of plasmon-generated hot charge carriers. Although plasmonic metal-semiconductor heterostructures can improve the separation of hot charge carriers, a large portion of the hot charge carriers are lost when they cross the Schottky barrier. Herein, a Schottky-barrier-free plasmonic semiconductor photocatalyst, MoO_{3- x} , which allows for efficient N₂ photofixation in a "one-stone-two-birds" manner, is demonstrated. The oxygen vacancies in MoO_{3- x} serve as the "stone." They "kill two birds" by functioning as the active sites for the chemisorption of N₂ molecules and inducing localized surface plasmon resonance for the generation of hot charge carriers. Benefiting from this unique strategy, plasmonic MoO_{3- x} exhibits a remarkable photoreactivity for NH₃ production up to the wavelength of 1064 nm with apparent quantum efficiencies over 1%, and a solar-to-ammonia conversion efficiency of 0.057% without any hole scavenger. This work shows the great potential of plasmonic semiconductors to be directly used for photocatalysis. The concept of the Schottky-barrier-free design will pave a new path for the rational design of efficient photocatalysts.

Fundamentals and applications of photoelectrocatalysis as an efficient process to remove pollutants from water: A review

Water pollution is an environmental problem in constant raising because of population growing, industrial development, agricultural frontier expansion, and principally because of the lack of wastewater treatment technology to remove organic recalcitrant and toxic pollutants from industrial and domestic wastewater. Recalcitrant compounds are a serious environmental and health problem mainly due to their toxicity and potential hazardous effects on living organisms, including human beings. Conventional wastewater treatments have not been able to remove efficiently pollutants from water; however, electrochemical advanced oxidation processes (EAOPs) are able to solve this environmental concern. One of the most recent EAOPs technology is photoelectrocatalysis (PEC), it consists in applying an external bias potential to a semiconductor film placed over a conductive substrate to avoid the recombination of photogenerated electron-hole (e^-/h⁺) pairs, increasing h⁺ availability and hydroxyl radicals' formation, responsible for promoting the degradation/mineralization of organic pollutants in aqueous medium. This review summarizes the recent advances in PEC as a promising technology for wastewater treatment. It addresses the fundamentals and kinetic aspects of PEC. An analysis of photoanode materials and of the configuration of photoelectrochemical reactors is also presented, including an analysis of the influence of the main operational parameters on the treatment of contaminated water. Finally, the most recent applications of PEC are reviewed, and the challenges and perspectives of PEC in wastewater treatment are discussed.

Photoelectrocatalytic degradation of glyphosate on titanium dioxide synthesized by sol-gel/spin-coating on boron doped diamond (TiO2/BDD) as a photoanode

The construction of a photoanode with several layers of titanium oxysulfate as a precursor to form titanium dioxide-TiO2 on boron doped diamond-BDD (TiO2/BDD), and its application for the photoelectro-degradation of glyphosate in aqueous medium are presented. The study was divided into three stages: i) optimization of the number of layers of the TiO2 precursor to modify BDD using a novel method combining Sol-gel/Spin-Coating; ii) characterization of the TiO2/BDD electrodes, by scanning electron microscopy-SEM, dispersive energy spectroscopy-EDX, Ray diffraction-XRD, contact angle, and electrochemical response by cyclic voltammetry using [Fe(CN)6]3-/4- system; iii) degradation of glyphosate (50 mg L-1) by electrochemical oxidation on BDD and photoelectrocatalysis on TiO2/BDD in dark and UV-light conditions, at different current densities, for 5 h. The glyphosate degradation and mineralization were evaluated by High-Performance Liquid Chromatography, Total Organic Carbon, Chemical Oxygen Demand and inorganic-ions concentration (NO3-, PO43-, and NH4+). Also, the aminomethylphosphonic acid-AMPA was quantified by HPLC, as a degradation intermediate. Using five layers of the TiO2 precursor, in the construction of TiO2/BDD photoanode, and a lower contact angle, greater photoelectrocatalysis against the [Fe(CN)6]3-/4- redox system and better degradation of glyphosate compared to BDD without modification were achieved. The formation of TiO2 nanoparticles (14.79 ± 3.43 nm) in anatase phase on BDD was verified by SEM and XRD. Additionally, glyphosate degradation and mineralization were 2.3 times faster by photoelectrocatalysis on TiO2/BDD, relative to BDD, at 3 mA cm-2 and UV-light. Thus, the presence of TiO2 on BDD increases the rate and efficiency of glyphosate degradation with respect to electrochemical oxidation on BDD.

Comparative Photo-Electrochemical and Photocatalytic Studies with Nanosized TiO2 Photocatalysts towards Organic Pollutants Oxidation

The size of TiO2 can significantly affect both its photocatalytic and photo-electrochemical properties, thus altering the photooxidation of organic pollutants in air or water. In this work, we give an account of the photo-electrochemical and photocatalytic features of some nanosized TiO2 commercial powders towards a model reaction, the photooxidation of acetone. Cyclic voltammograms (CV) of TiO2 particulate electrodes under UV illumination experiments were carried out in either saturated O2 or N2 solutions for a direct correlation with the photocatalytic process. In addition, the effect of different reaction conditions on the photocatalytic efficiency under UV light in both aqueous and gaseous phases was also investigated. CV curves with the addition of acetone under UV light showed a negative shift of the photocurrent onset, confirming the efficient transfer of photoproduced reactive oxygen species (ROSs), e.g., hydroxyl radicals or holes to acetone molecules. The photocatalytic experiments showed that the two nano-sized samples exhibit the best photocatalytic performance. The different photoactivity of the larger-sized samples is probably attributed to their morphological differences, affecting both the amount and distribution of free ROSs involved in the photooxidation reaction. Finally, a direct correlation between the photocatalytic measurements in gas phase and the photo-electrochemical measurements in aqueous phase is given, thus evincing the important role of the substrate-surface interaction with similar acetone concentrations.