Synthesis and applications of amino-functionalized carbon nanomaterials

Effect of functionalization on the adsorption performance of carbon nanotube as a drug delivery system for imatinib: molecular simulation study

In this study, efficiency of functionalized carbon nanotube as a potential delivery system for imatinib anti-cancer drug was investigated. Accordingly, carboxyl and hydroxyl functionalized carbon nanotube were inspected as a notable candidate for the carriage of this drug in aqueous media. For this purpose, possible interactions of imatinib with pure and functionalized carbon nanotube were considered in aqueous media. The compounds were optimized in gas phase using density functional calculations. Solvation free energies and association free energies of the optimized structures were then studied by Monte Carlo simulation and perturbation method in water environment. Outcomes of quantum mechanical calculations presented that pure and functionalized carbon nanotubes can act as imatinib drug adsorbents in gas phase. However, results of association free energy calculations in aqueous solution indicated that only carboxyl and hydroxyl functionalized carbon nanotubes could interact with imatinib. Monte Carlo simulation results revealed that electrostatic interactions play a vital role in the intermolecular interaction energies after binding of drug and nanotube in aqueous solution. Computed solvation free energies in water showed that the interactions with functionalized carbon nanotubes significantly enhance the solubility of imatinib, which could improve its in vivo bioavailability.

A dual-mode sensing platform coupling two-signal ratiometric and colorimetric methods for detecting Au3+ based on surface state-regulated carbon nanodot

The considerable risk posed by Au3+ residues to the environment and human health has sparked interest in researching Au3+ monitoring techniques. The detection results in the usual ratio mode are more reliable. In this work, we develop a dual-mode strategy based on reducing carbon dots coupling with two-signal ratiometric and colorimetric methods for high-sensitivity, good-selectivity, and wide-range detection of Au3+. Cyan carbon dots (C-CDs) were synthesized by a simple and efficient one-step hydrothermal method. The C-CDs with rich amino group used m-phenylenediamine as carbon source, which made it have the potential as a reducing agent. After the addition of Au3+, Au3+ was reduced to Au0, generating stable gold nanoparticles (AuNPs). The fluorescence signal (F490) of C-CDs decreased. At the same time, the large size of AuNPs enhances the second-order scattering signal (S770) and produces the UV-visible absorption peak of AuNPs. Therefore, the dual-mode sensing strategy combining S770/F490 ratiometric and colorimetric detection of Au3+ is realized with high accuracy and sensitivity. Au3+ was determined in real samples and a good recovery was obtained. The dual-mode method has good performance and practicality, so it shows great potential for environment testing in a simple and reliable way.

Adsorbents for the Uranium Capture from Seawater for a Clean Energy Source and Environmental Safety: A Review

On the global level, uranium is considered the main nuclear energy source, and its removal from terrestrial ores is enough to last until the end of the current century. Therefore, a major focus is attracted toward the capture of uranium from a sustainable source (seawater). Uranium recovery from seawater has been reported over the last few decades, and recently many efforts have been devoted to the preparation of such adsorbents with higher selectivity and adsorption capacity. The purpose of this review is to report the advancement in adsorbent preparation and modification of porous materials. It also discusses challenges such as adsorbent selectivity, low uranium concentration in seawater, contact time, biofouling, and the solution to the problems necessary to ensure a better adsorption performance of the adsorbent.

Characterization of emerging 2D materials after chemical functionalization

The chemical modification of 2D materials has proven a powerful tool to fine tune their properties. With this motivation, the development of new reactions has moved extremely fast. The need for speed, together with the intrinsic heterogeneity of the samples, has sometimes led to permissiveness in the purification and characterization protocols. In this review, we present the main tools available for the chemical characterization of functionalized 2D materials, and the information that can be derived from each of them. We then describe examples of chemical modification of 2D materials other than graphene, focusing on the chemical description of the products. We have intentionally selected examples where an above-average characterization effort has been carried out, yet we find some cases where further information would have been welcome. Our aim is to bring together the toolbox of techniques and practical examples on how to use them, to serve as guidelines for the full characterization of covalently modified 2D materials.

Utilization of carbon-based nanomaterials for wastewater treatment and biogas enhancement: A state-of-the-art review

The management of environmental pollution and carbon dioxide (CO2) emissions is a challenge that has spurred increased research interest in determining sustainable alternatives to decrease biowaste. This state-of-the-art review aimed to describe the preparation and utilization of carbon-based nanomaterials (CNM) for biogas enhancement and wastewater contaminant (dyes, color, and dust particles) removal. The novelty of this review is that we elucidated that the performance of CNMs in the anaerobic digestion (AD) varies from one system to another. In addition, this review revealed that increasing the pyrolysis temperature can facilitate the transition from one CNM type to another and outlined the methods that can be used to develop CNMs, including arc discharge, chemical exfoliation, and laser ablation. In addition, this study showed that methane (CH4) yield can be slightly increased (e.g. from 33.6% to 60.89%) depending on certain CNM factors, including its type, concentration, and feedstock. Temperature is a fundamental factor involved in the method and carbon sources used for CNM synthesis. This review determined that graphene oxide is not a good additive for biogas and CH4 yield improvement compared with other types of CNM, such as graphene and carbon nanotubes. The efficacy of CNMs in wastewater treatment depends on the temperature and pH of the solution. Therefore, CNMs are good adsorbents for wastewater contaminant removal and are a promising alternative for CO2 emissions reduction. Further research is necessary to determine the relationship between CNM synthesis and preparation costs while accounting for other factors such as gas flow, feedstock, consumption time, and energy consumption.

Anion-π catalysis on carbon allotropes

Anion-π catalysis, introduced in 2013, stands for the stabilization of anionic transition states on π-acidic aromatic surfaces. Anion-π catalysis on carbon allotropes is particularly attractive because high polarizability promises access to really strong anion-π interactions. With these expectations, anion-π catalysis on fullerenes has been introduced in 2017, followed by carbon nanotubes in 2019. Consistent with expectations from theory, anion-π catalysis on carbon allotropes generally increases with polarizability. Realized examples reach from enolate addition chemistry to asymmetric Diels-Alder reactions and autocatalytic ether cyclizations. Currently, anion-π catalysis on carbon allotropes gains momentum because the combination with electric-field-assisted catalysis promises transformative impact on organic synthesis.

Hybrid Zn-β-Aminoporphyrin-Carbon Nanotubes: Pyrrolidine and Direct Covalent Linkage Recognition, and Multiple-Photo Response

To unveil and shape the molecular connectivity in (metallo)porphyrin-carbon nanotube hybrids are of main relevance for the multiple medicinal, photoelectronic, catalytic, and photocatalytic applications of these materials. Multi-walled carbon nanotubes (MWCNTs) were modified through 1,3-dipolar cycloaddition reactions with azomethine ylides generated in situ and carrying pentafluorophenyl groups, followed by immobilization of the β-amino-tetraphenylporphyrinate Zn(II). The functionalities were confirmed via XPS and FTIR, whereas Raman spectroscopy showed disruptions on the graphitic carbon nanotube surface upon both steps. The functionalization extension, measured via TGA mass loss and corroborated via XPS, was 0.2 mmol·g-1. Photophysical studies attest to the presence of the different porphyrin-carbon nanotube connectivity in the nanohybrid. Significantly different emission spectra and fluorescence anisotropy of 0.15-0.3 were observed upon variation of excitation wavelength. Vis-NIR absorption and flash photolysis experiments showed energy/charge transfer in the photoactivated nanohybrid. Moreover, evidence was found for direct reaction of amino groups with a carbon nanotube surface in the presence of molecular dipoles such as the zwitterionic sarcosine amino acid.

Size-dependent activity of carbon dots for photocatalytic H2 generation in combination with a molecular Ni cocatalyst

Carbon dots (CDs) are low-cost light-absorbers in photocatalytic multicomponent systems, but their wide size distribution has hampered rational design and the identification of the factors that lead to their best performance. To address this challenge, we report herein the use of gel filtration size exclusion chromatography to separate amorphous, graphitic, and graphitic N-doped CDs depending on their lateral size to study the effect of their size on photocatalytic H2 evolution with a DuBois-type Ni cocatalyst. Transmission electron microscopy and dynamic light scattering confirm the size-dependent separation of the CDs, whereas UV-vis and fluorescence spectroscopy of the more monodisperse fractions show a distinct response which computational modelling attributes to a complex interplay between CD size and optical properties. A size-dependent effect on the photocatalytic H2 evolution performance of the CDs in combination with a molecular Ni cocatalyst is demonstrated with a maximum activity at approximately 2-3 nm CD diameter. Overall, size separation leads to a two-fold increase in the specific photocatalytic activity for H2 evolution using the monodisperse CDs compared to the as synthesized polydisperse samples, highlighting the size-dependent effect on photocatalytic performance.

Foliar application of Phenylalanine functionalized multi-walled carbon nanotube improved the content of volatile compounds of basil grown in greenhouse

Carbon nanotubes are among the elicitors that have different effects on plants. Basil as a useful and valuable plant has significant medicinal properties; The aim of this research is to study the effect of different concentrations of functionalized multi-walled carbon nanotubes with phenylalanine and non-functionalized in concentrations of (0, 50, 100, 150 and 200 mg.l^-1) and activated carbon on total phenol and flavonoid content, antioxidant capacity, the content of H₂O₂, reactive oxygen species detection, antioxidant enzyme activity, and the concentration of volatile compounds of basil in the greenhouse culture, in an experiment in the form of a completely randomized design with three replications, and in the faculty of sciences of Urmia university's laboratory. The highest content of total phenol, flavonoid, anthocyanin, antioxidant capacity and hydrogen peroxide content were observed in the 200 mg.l^-1 functionalized carbon nanotube. The highest percentage of alpha-Copaene, trans-alpha-Bergamotene, alpha-Guaiene, Bicyclogermacrene, 1,10-di-epi-Cubenol and alpha-Eudesmol compounds at 150 mg.l^-1 of functionalized carbon nanotube and the highest percentage of compounds 1,8-cineole and eugenol was observed at 100 mg.l^-1 of functionalized carbon nanotube. The compounds of linalool, camphor and anethole also showed their highest amount in treatments of 200, 150 and 50 mg.l^-1 of carbon nanotube, respectively. In general, the observations of this research indicated that the use of functionalized carbon nanotubes as a stimulant has increased the antioxidant capacity of basil and on the other hand, it has led to an improving in the content of secondary metabolites.

Tailoring the Chemical Structure of Nitrogen-Doped Carbon Dots for Nano-Aminocatalysis in Aqueous Media

Amine-rich carbon dots (NCDs) have become promising nano-aminocatalytic platforms in organic synthesis. These nanomaterials can be effectively produced through straightforward bottom-up approaches using inexpensive nitrogen-containing molecular precursors as a starting material. However, to date, there is still a limited understanding of how the molecular features of these precursors affect the catalytic activity of the resulting nanoparticles. This study concerns the production of a new family of NCDs, which use l-arginine and different alkyl diamines as starting materials. The surface amines of all these NCDs were comprehensively characterized, thus allowing us to provide a correlation between the structural features of the nanoparticles and their catalytic performance with a selected amino-catalyzed organic transformation. Importantly, the most active nano-aminocatalysts, namely, NCDs-3, were then used as a basis for the formation of a wide variety of functionalized organic compounds in water under mild reaction conditions.

Theoretical mechanism study on the electrochemical benzylation of [60]fullerene derivatives

The electrochemical methodology is available for the functionalization of fullerenes. However, intricate and ambiguous issues remain to be identified for some electrochemical reactions. In this work, density functional theory (DFT) calculations reveal that the electron delocalization of C₆₀ in fullerobenzofuran (RF5) and the C₆₀-fused lactone (RL6) declines with the electron injection of electrochemistry, and clear active sites can be obtained to react with the electrophilic agent. Furthermore, the selectivity of the addition reaction depends on the O^δ- site, which is inclined to react with the C^δ+ of C₆₀ after electron injection or the C^δ+ of PhCH₂⁺, forming a new C-O bond.

Overview of Engineering Carbon Nanomaterials Such As Carbon Nanotubes (CNTs), Carbon Nanofibers (CNFs), Graphene and Nanodiamonds and Other Carbon Allotropes inside Porous Anodic Alumina (PAA) Templates

The fabrication and design of carbon-based hierarchical structures with tailored nano-architectures have attracted the enormous attention of the materials science community due to their exceptional chemical and physical properties. The collective control of nano-objects, in terms of their dimensionality, orientation and size, is of paramount importance to expand the implementation of carbon nanomaterials across a large variety of applications. In this context, porous anodic alumina (PAA) has become an attractive template where the pore morphologies can be straightforwardly modulated. The synthesis of diverse carbon nanomaterials can be performed using PAA templates, such as carbon nanotubes (CNTs), carbon nanofibers (CNFs), and nanodiamonds, or can act as support for other carbon allotropes such as graphene and other carbon nanoforms. However, the successful growth of carbon nanomaterials within ordered PAA templates typically requires a series of stages involving the template fabrication, nanostructure growth and finally an etching or electrode metallization steps, which all encounter different challenges towards a nanodevice fabrication. The present review article describes the advantages and challenges associated with the fabrication of carbon materials in PAA based materials and aims to give a renewed momentum to this topic within the materials science community by providing an exhaustive overview of the current synthesis approaches and the most relevant applications based on PAA/Carbon nanostructures materials. Finally, the perspective and opportunities in the field are presented.

Amine-Rich Carbon Dots as Novel Nano-Aminocatalytic Platforms in Organic Synthesis

The development of novel and effective metal-free catalytic systems, which can drive value-added organic transformations in environmentally benign solvents (for instance, water), is highly desirable. Moreover, these new catalysts need to be harmless, easy-to-prepare, and potentially recyclable. In this context, amine-rich carbon dots (CDs) have recently emerged as promising nano-catalytic platforms. These nitrogen-doped nanoparticles, which show dimensions smaller than 10 nm, generally consist of carbon cores that are surrounded by shells containing numerous amino groups. In recent years, organic chemists have used these surface amines to guide the design of several synthetic methodologies under mild operative conditions. This Concept highlights the recent advances in the synthesis of amine-rich carbon dots and their applications in organic catalysis, including forward-looking opportunities within this research field.

Photoluminescence Mechanism of Carbon Dots: Triggering Multiple Color Emissions through Controlling the Degree of Protonation

Carbon dots (CDs) have excellent optical properties, low toxicity and easy preparation, which have led to them being widely used in biomedicine, sensing and optical devices. However, although great progress has been made in the preparation of CDs, the detailed exploration of their photoluminescence (PL) mechanism is still under debate due to their complex structures and surface functionalities. Here, we proposed a single change in the pH of the synthesis condition, which had no effect on the CDs intrinsic core states and avoided the mutual influence of multiple PL origins. The m-phenylenediamine (m–PD) served as a carbon source, whose protonation degree determined the surface state of the resulting CDs and the accompanying fluorescence characteristics. The as-obtained CDs materials can be applied in the chemical sensor and anti-counterfeiting fields in a targeted manner. Therefore, our work not only contributes to the explanation of the CDs PL mechanism, but also obtains a series of CDs materials with controllable PL properties.

The Insolubility Problem of Organic Hole-Transport Materials Solved by Solvothermal Technology: Toward Solution-Processable Perovskite Solar Cells

Generally, the high efficiency of solution-processable perovskite solar cells (PSCs) comes at the expense of using expensive organic matters as a hole-transport material (HTM). Although intense efforts have tried to use commercially available and low-cost macrocyclic molecules as HTM candidates, they still face two enormous challenges: poor solubility and inherent instability. Here, solvothermal treatment for old and insoluble HTMs (phthalocyanine (Pc) and its derivatives) has been proposed, which is unusual due to the occurrence of solubilization for insoluble precursors induced by the carbonization of the dissolved part. Since the macrocyclic structure still exists, the as-prepared new-type carbon dots not only retain the capacity of hole transfer but serve as an effective passivation additive. Synergy makes the all-air-processed carbon-based PSCs (CH₃NH₃PbI₃) fabricated with carbon dots achieve a decent power conversion efficiency of 13.7%. Importantly, organics have undergone solvothermal treatment, completely breaking through the instability bottleneck, which exists in the long-term operation of PSCs. The universality of this methodology will usher exploration into other low-cost insoluble organics and drastically enhance the high-performance cost ratio of PSC equipment.

Electro-oxidation of amino-functionalized multiwalled carbon nanotubes

We report the electrochemistry of amino-functionalized multiwalled carbon nanotubes (MWCNTs-NH2) in the pH range from 0.3 to 6.4 using quantitative cyclic voltammetry (CV) and single entity electrochemistry measurements, making comparison with non-functionalized MWCNTs. CV showed the latter to both catalyze the solvent (water) decomposition and to undergo irreversible electro-oxidation forming oxygen containing surface functionality. The MWCNTs-NH2 additionally undergo an irreversible oxidation to an extent which is dependent on the pH of the solution, reflecting the variable amount of deprotonated amino groups present as a function of pH. Nano-impact experiments conducted at the single particle level confirmed the oxidation of both types of MWCNTs, showing agreement with the CV. The pK a of the amino groups in MWCNTs was determined via both electrochemical methods giving consistent values of ca. 2.5.

Iron–iodine co-catalysis towards tandem C–N/C–C bond formation: one-pot regioselective synthesis of 2-amino-3-alkylindoles

An efficient intermolecular C2,3-H aminoalkylation of indoles with 9H-xanthenes and azoles via iron–iodine co-catalyzed tandem C–N/C–C bond formation has been developed.

Extensively amino-functionalized graphene captures carbon dioxide

Amino-functionalized graphene demonstrates certain potential to fix carbon dioxide.

Pyrazole-, isoxazole- and pyrrole-ring fused derivatives of C60: synthesis and electrochemical properties as well as morphological characterization

Pyrazole-, isoxazole- and pyrrole-ring fused derivatives of C60.

Amino-Functionalized Cage-Opened C60 Derivatives

The amino-functionalized cage-opened [60]fullerene derivatives were synthesized by reactions with phenylenediamine. In this reaction, the diamine undergoes direct addition to the α,β-unsaturated carbonyl moiety. Further C-C bond scission is promoted by the intramolecular S_N2 reaction. These amino-functionalized derivatives possess high-lying highest occupied molecular orbital levels as suggested by electrochemical analyses. These compounds showed intense near-infrared absorption bands that tail to 900 nm, reflecting the optical transition with π-π* and charge transfer character.

Novel strategies to oral delivery of insulin: Current progress of nanocarriers for diabetes management

Diabetes mellitus is one of the most serious public health problems in the world. Repeated daily injections of subcutaneous insulin is the standard treatment for patients with type 1 diabetes mellitus; however, subcutaneous insulin injections can potentially cause local discomfort, patient noncompliance, hypoglycemia, failure to regulate glucose homeostasis, infections, and fat deposits at the injection sites. In recent years, numerous attempts have been made to produce safe and efficient nanoparticles for oral insulin delivery. Oral administration is considered the most effective alternative route to insulin injection, but it is accompanied by several challenges related to enzymatic proteolysis, digestive breakdown, and absorption barriers. A number of natural and synthetic polymeric, lipid-based, and inorganic nanoparticles have been investigated for use. Although improvements have recently been made in potential oral insulin delivery systems, these require further investigation before clinical trials are conducted. In this review, new approaches to oral insulin delivery for diabetes treatment are discussed, including polymeric, lipid-based, and inorganic nanoparticles, as well as the clinical trials performed for this purpose.

Functionalized Carbon Materials in Syngas Conversion

Functionalized carbon materials are widely used in heterogeneous catalysis due to their unique properties such as adjustable surface properties, excellent thermal conductivity, high surface areas, tunable porosity, and moderate interactions with guest metals. The transformation of syngas into hydrocarbons (known as the Fischer-Tropsch synthesis) or oxygenates is an exothermic reaction and is typically catalyzed by transition metals dispersed on functionalized supports. Various carbon materials have been employed in syngas conversions not only for improving the performance or decreasing the dosage of expensive active metals but also for building model catalysts for fundamental research. This article provides a critical review on recent advances in the utilization of carbon materials, in particular the recently developed functionalized nanocarbon materials, for syngas conversions to either hydrocarbons or oxygenates. The unique features of carbon materials in dispersing metal nanoparticles, heteroatom doping, surface modification, and building special nanoarchitectures are highlighted. The key factors that control the reaction course and the reaction mechanism are discussed to gain insights for the rational design of efficient carbon-supported catalysts for syngas conversions. The challenges and future opportunities in developing functionalized carbon materials for syngas conversions are briefly analyzed.

Carbon Dots: An Innovative Tool for Drug Delivery in Brain Tumors

Brain tumors are particularly aggressive and represent a significant cause of morbidity and mortality in adults and children, affecting the global population and being responsible for 2.6% of all cancer deaths (as well as 30% of those in children and 20% in young adults). The blood-brain barrier (BBB) excludes almost 100% of the drugs targeting brain neoplasms, representing one of the most significant challenges to current brain cancer therapy. In the last decades, carbon dots have increasingly played the role of drug delivery systems with theranostic applications against cancer, thanks to their bright photoluminescence, solubility in bodily fluids, chemical stability, and biocompatibility. After a summary outlining brain tumors and the current drug delivery strategies devised in their therapeutic management, this review explores the most recent literature about the advances and open challenges in the employment of carbon dots as both diagnostic and therapeutic agents in the treatment of brain cancers, together with the strategies devised to allow them to cross the BBB effectively.

Organic Functionalized Carbon Nanostructures for Solar Energy Conversion

This review presents an overview of the use of organic functionalized carbon nanostructures (CNSs) in solar energy conversion schemes. Our attention was focused in particular on the contribution of organic chemistry to the development of new hybrid materials that find application in dye-sensitized solar cells (DSSCs), organic photovoltaics (OPVs), and perovskite solar cells (PSCs), as well as in photocatalytic fuel production, focusing in particular on the most recent literature. The request for new materials able to accompany the green energy transition that are abundant, low-cost, low-toxicity, and made from renewable sources has further increased the interest in CNSs that meet all these requirements. The inclusion of an organic molecule, thanks to both covalent and non-covalent interactions, in a CNS leads to the development of a completely new hybrid material able of combining and improving the properties of both starting materials. In addition to the numerical data, which unequivocally state the positive effect of the new hybrid material, we hope that these examples can inspire further research in the field of photoactive materials from an organic point of view.

Carbon nanotubes as an emerging nanocarrier for the delivery of doxorubicin for improved chemotherapy

Carbon nanotubes (CNTs), a versatile nanocarrier for doxorubicin (DOX) delivery had attracted significant attention in drug delivery of pharmaceuticals. Several properties such as high surface area, high drug loading capacity, stability, ease of functionalization, ultrahigh length to diameter ratio and good cellular uptake make them preferred nanocarrier as multipurpose drug delivery system. Several surface properties of CNTs can be easily modified by covalent/noncovalent functionalization, which can make CNTs a profound nanomaterial. Hydrophobic surface of CNTs facilitated π-π stacking interactions, with several drugs and therapeutic agents having aromatic ring in their structure, for example anthracyclines. In case some drug molecules, electrostatic interaction between drug and CNTs comes into the picture. DOX, an anthracycline anticancer drug, can easily adsorb on the surface of CNTs by π-π stacking interactions. In present article, we have reviewed various CNTs based drug delivery systems for the delivery of DOX alone or in combination with genetic materials and other drug molecules. In addition, we described recent updates in CNTs based drug delivery system for the delivery of DOX, we covered adsorption and desorption, different types of functionalization, to alter the properties of CNTs in vitro and in vivo. CNT attached many targeting ligands for the targeted delivery of DOX have also been discussed.

Addition Reaction between Piperidine and C60 to Form 1,4-Disubstituted C60 Proceeds through van der Waals and Dative Bond Complexes: Theoretical and Experimental Study

A combined computational and experimental study reveals the character of the C₆₀ complexes with piperidine formed under different reaction conditions. The IR and NMR experiments detect the dative bond complex, which according to NMR, is stable in the oxygen-free environment and transforms to the adduct complex in the presence of O₂. Computational studies on the character of reaction channels rationalize the experimental observations. They show that the piperidine dimer rather than a single piperidine molecule is required for the complex formation. The calculations reveal significant differences in the dative bond and adduct complexes' character, suggesting a considerable versatility in their electronic properties modulated by the environment. This capability offers new application potential in several fields, such as in energy storage devices.