The mechanism of bending in a plastically flexible crystal

Low-Temperature Flexibility of Chiral Organic Crystals with Highly Efficient Second-Harmonic Generation

Flexible crystals with unique mechanical properties have presented potential for applications in optoelectronics, soft robotics and sensors. However, there have been no reports of low-temperature-resistant flexible crystals with second-order nonlinear optical properties (NLO). Here, we report flexible chiral Schiff-base crystals capable of efficient second harmonic generation (SHG). Both enantiomers and the racemic form of these crystals are mechanically flexible in two directions at both room temperature and at 77 K, although their mechanical responses differ. The enantiomers display SHG with an intensity of up to 12 times that of potassium dihydrogenphosphate (KDP) when pumped at 980 nm, and they also have high laser-induced damage thresholds (LDT). Even when bent, the crystals retain strong second harmonic generation, although with a different intensity distribution depending on the polarization, compared to when they are straight. This work describes the first instance of flexible organic single-crystalline material with NLO properties and lays the foundation for the development of mechanically flexible organic NLO materials.

Gas Release as an Efficient Strategy to Tune Mechanical Properties and Thermoresponsiveness of Dynamic Molecular Crystals

Dynamic molecular crystals combining multiple and finely tunable functionalities are attracting and an increasing attention due to their potential applications in a broad range of fields as efficient energy transducers and stimuli-responsive materials. In this context, a multicomponent organic salt, piperazinium trifluoroacetate (PZTFA), endowed with an unusual multidimensional responsive landscape is reported. Crystals of the salt undergo smooth plastic deformation under mechanical stress and thermo-induced jumping. Furthermore, via controlled crystal bending and release of trifluoroacetic acid from the lattice, which is anticipated from the design of the material, both the mechanical response and the thermoresponsive behavior are efficiently tuned while partially preserving the crystallinity of the system. In particular, mechanical deformation hampers guest release and hence the macroscopic jumping effect, while trifluoroacetic acid release stiffens the crystals. These complex adaptive responses establish a new crystal engineering strategy to gain further control over dynamic organic crystals.

A Thermosalient and Mechanically Compliant Organic Crystalline Optical Waveguide Switcher

The dense and ordered molecular arrangements endow dynamic molecular crystals with fast response, rapid energy conversion, low energy dissipation, and strong coupling between heat/light and mechanical energy. Most of the known dynamic crystals can only respond to a single stimulus, and materials that can respond to multiple stimuli are rare. Here, we report an organic crystalline material that can be bent plastically and is also thermosalient, as its crystals can move when they undergo a reversible phase transition. The crystals transmit light regardless of their shape or crystalline phase. The combination of light transduction and reversible thermomechanical deformation provides an opportunity to switch the waveguiding capability of the material in a narrow temperature range, which holds a tremendous potential for applications in heat-averse electronic components, such as central processing units. Unlike existing electronics, the material we report here is completely organic and therefore much lighter, potentially reducing the overall weight of electronic circuits.

Flexible molecular crystals for optoelectronic applications

The cornerstones of the advancement of flexible optoelectronics are the design, preparation, and utilization of novel materials with favorable mechanical and advanced optoelectronic properties. Molecular crystalline materials have emerged as a class of underexplored yet promising materials due to the reduced grain boundaries and defects anticipated to provide enhanced photoelectric characteristics. An inherent drawback that has precluded wider implementation of molecular crystals thus far, however, has been their brittleness, which renders them incapable of ensuring mechanical compliance required for even simple elastic or plastic deformation of the device. It is perplexing that despite a plethora of reports that have in the meantime become available underpinning the flexibility of molecular crystals, the "discovery" of elastically or plastically deformable crystals remains limited to cases of serendipitous and laborious trial-and-error approaches, a situation that calls for a systematic and thorough assessment of these properties and their correlation with the structure. This review provides a comprehensive and concise overview of the current understanding of the origins of crystal flexibility, the working mechanisms of deformations such as plastic and elastic bending behaviors, and insights into the examples of flexible molecular crystals, specifically concerning photoelectronic changes that occur in deformed crystals. We hope this summary will provide a reference for future experimental and computational efforts with flexible molecular crystals aimed towards improving their mechanical behavior and optoelectronic properties, ultimately intending to advance the flexible optoelectronic technology.

Shape memory and self-healing in a molecular crystal with inverse temperature symmetry breaking

Mechanically responsive molecular crystals have attracted increasing attention for their potential as actuators, sensors, and switches. However, their inherent structural rigidity usually makes them vulnerable to external stimuli, limiting their usage in many applications. Here, we present the mechanically compliant single crystals of penciclovir, a first-line antiviral drug, achieved through an unconventional ferroelastic transformation with inverse temperature symmetry breaking. These crystals display a diverse set of self-restorative behaviors well above room temperature (385 K), including ferroelasticity, superelasticity, and shape memory effects, suggesting their promising applications in high-temperature settings. Crystallographic analysis reveals that cooperative molecular displacement within the layered crystal structure is responsible for these unique properties. Most importantly, these ferroelastic crystals manifest a polymer-like self-healing behavior even after severe cracking induced by thermal or mechanical stresses. These findings suggest the potential for similar memory and restorative effects in other molecular crystals featuring layered structures and provide valuable insights for leveraging organic molecules in the development of high-performance, ultra-flexible molecular crystalline materials with promising applications.

Elastic Organic Crystals Exhibiting Amplified Spontaneous Emission Waveguides with Standard Red Chromaticity of the Rec.2020 Gamut

The use of mechanically flexible molecular crystals as optical transuding media is demonstrated for a plethora of applications; however, the spectral peaks of optical outputs located mainly in the range of 400-600 nm are insufficient for practical telecommunication and full-color display applications. Herein, two elastically bendable organic crystals are reported that show red emission of the rec.709 gamut under 365 nm UV light irradiation yet generate rec.2020 gamut red optical waveguides and amplified spontaneous emissions when irradiated by a 355 nm laser. Capitalizing on the extended π-conjugation and donor-acceptor character, as well as mechanical elasticity, these organic crystals exhibit flexible optical waveguides with Commission Internationale de L'Eclairage (CIE) coordinates of (0.70, 0.29), nearly identical to the red chromaticity of the rec.2020 gamut required for ultrahigh-definition (UHD) displays. Notably, one of the elastic crystals functions as a soft resonance cavity, resulting in amplified spontaneous emission waveguides with CIE coordinates of (0.71, 0.29) and the standard red chromaticity of the rec.2020 gamut, both in straight and bent states. This study presents a new avenue for the development of high-purity red-emissive crystalline materials to create all-organic, lightweight, and mechanically compliant optical telecommunication and UHD display devices.

Photoactuators Based on Plastically Flexible α-Cyanostilbene Molecular Crystals Driven by the Solid-State [2+2] Cycloaddition Reaction

Organic photomechanical molecular crystals are promising candidates for photoactuators, which have potential applications as smart materials in various fields. However, it is still challenging to fabricate photomechanical molecular crystals with flexibility because most of the molecular crystals are brittle and the mechanism of flexible crystals remains controversial. Here, a plastically flexible α-cyanostilbene crystal has been synthesized that can undergo solid-state [2+2] cycloaddition reaction under violet or UV irradiation and exhibits excellent photomechanical bending properties. A hook-shaped crystal can lift 0.7 mg object upward by 1.5 cm, which proves its potential for application as photoactuators. When complex with the agarose polymer, the molecules will be in the form of macroscopic crystals, which can drive the composite films to exhibit excellent photomechanical bending performance. Upon irradiation with UV light, the composite film can quickly lift 18.0 mg object upward by 0.3 cm. The results of this work may facilitate the application of macroscale crystals as photoactuators.

Crystal property engineering using molecular-supramolecular equivalence: mechanical property alteration in hydrogen bonded systems

Most crystal engineering strategies exercised until now mainly rely on the alteration of weak non-covalent interactions to design structures and thus properties. Examples of mechanical property alteration for a given structure type are rare with only a few halogen bonded cases. The modular nature of halogen bonds with interaction strength tunability makes the task straightforward to obtain property differentiated crystals. However, the design of such crystals using hydrogen bond interactions has proven to be non-trivial, because of its relatively higher difference in bonding energies, and more importantly, disparate geometries of the functional groups. In the present crystal property engineering exercise, with the support of CSD analysis, we replaced a supramolecular precursor that leads to plastically bendable crystals, with a molecular equivalent, and obtained an equivalent crystal structure. As a result, the new structure, with comparable hydrogen bonding chains, produces elastically bendable single crystals (as opposed to plastically bendable crystals). In addition, the crystals show multidirectional (here two) elastic bending as well as rare elastic twisting. The occurrence of multiple isostructural examples, including a solid solution, with identical properties further demonstrates the general applicability of the proposed model. Crystals cannot display the concerned mechanical property in the absence of the desired structure type and fracture in a brittle manner on application of an external stress. Nanomechanical experiments and energy framework calculations also complement our results. To the best of our knowledge, this is the first example of a rational crystal engineering exercise using solely hydrogen bond interactions to obtain property differentiated crystals. This strategy namely molecular-supramolecular equivalence has been unexplored till now to tune mechanical properties, and hence is useful for crystal property engineering.

CX-ASAP: a high-throughput tool for the serial refinement and analysis of crystallographic data collected under varying conditions

CX-ASAP is a new open-source software project designed to greatly reduce the time required to analyse crystallographic data collected under varying conditions. Scripted in Python3, CX-ASAP can automatically refine, finalize and analyse data collections with wide-ranging temperatures, pressures etc. This is achieved using a reference structure, allowing for quick identification of problems, phase changes and even model comparison. The modular design means that new features and customized scripts can be easily added, tailoring the capabilities to the specific needs of the user. It is envisioned that CX-ASAP will help to close the growing gap between fast collection times and slow data finalization.

Crystals of Aliphatic Derivatives of [Cu(acac)2 ] have Distinct Atomic-Scale Mechanisms of Bending

Molecular crystals displaying elastic flexibility have important applications in the fields of optoelectronics and nanophotonic technologies. Understanding the mechanisms by which these materials bend is critical to the design of future materials incorporating these properties. Based on the known elastic properties of bis(acetylacetonato)copper(II), a series of 14 aliphatic derivatives are synthesized and crystallized. All those which grew in a needle morphology display noticeable elasticity, with 1D chains of π-stacked molecules parallel to the long metric length of the crystal a consistent crystallographic feature. Crystallographic mapping is used to measure the mechanism of elasticity at an atomic-scale. Symmetric derivatives with ethyl and propyl side chains are found to have different mechanisms of elasticity, which are further distinguished from the previously reported mechanism of bis(acetylacetonato)copper(II). While crystals of bis(acetylacetonato)copper(II) are known to bend elastically via a molecular rotation mechanism, the elasticity of the compounds presented is facilitated by expansion of their π-stacking interactions.

Plastic Deformation in a Molecular Crystal Enables a Piezoresistive Response

Organic materials are promising candidates for the development of efficient sensors for many medicinal and materials science applications. Single crystals of a small molecule, 4-trifluoromethyl phenyl isothiocyanate (4CFNCS), exhibit plastic deformation when bent, twisted, or coiled. Synchrotron micro-focus X-ray diffraction mapping of the bent region of the crystal confirms the mechanism of deformation. The crystals are incorporated into a flexible piezoresistive sensor using a composite constituting PEDOT: PSS/4CFNCS, which shows an impressive performance at high-pressure ranges (sensitivity 0.08 kPa^-1 above 44 kPa).

Plastic bending in a semiconducting coordination polymer crystal enabled by delamination

Coordination polymers (CPs) are a class of crystalline solids that are considered brittle, due to the dominance of directional coordination bonding, which limits their utility in flexible electronics and wearable devices. Hence, engineering plasticity into functional CPs is of great importance. Here, we report plastic bending of a semiconducting CP crystal, Cu-Trz (Trz = 1,2,3-triazolate), that originates from delamination facilitated by the discrete bonding interactions along different crystallographic directions in the lattice. The coexistence of strong coordination bonds and weak supramolecular interactions, together with the unique molecular packing, are the structural features that enable the mechanical flexibility and anisotropic response. The spatially resolved analysis of short-range molecular forces reveals that the strong coordination bonds, and the adaptive C–H···π and Cu···Cu interactions, synergistically lead to the delamination of the local structures and consequently the associated mechanical bending. The proposed delamination mechanism offers a versatile tool for designing the plasticity of CPs and other molecular crystals.

Flexible organic crystals. Understanding the tractable co-existence of elastic and plastic bending

As an emerging class of flexible materials, mechanically bendable molecular crystals are broadly classified as elastic or plastic. Nevertheless, flexible organic crystals with mutually exclusive elastic and plastic traits, with contrasting structural requirements, co-existing under different stress settings are exceptional; hence, it is imperative to establish the concurring factors that beget this rare occurrence. We report a series of halogen-substituted benzil crystals showing elastic bending (within ∼2.45% strain), followed by elastoplastic deformation under ambient conditions. Under higher stress settings, they display exceptional plastic flexibility that one could bend, twist, or even coil around a capillary tube. X-ray diffraction, microscopy, and computational data reveal the microscopic and macroscopic basis for the exciting co-existence of elastic, elastoplastic, and plastic properties in the crystals. The layered molecular arrangement and the weak dispersive interactions sustaining the interlayer region provide considerable tolerance towards breaking and making upon engaging or releasing the external stress; it enables restoring the original state within the elastic strain. Comparative studies with oxalate compounds, wherein the twisted diketo moiety in benzil was replaced with a rigid and coplanar central oxalate moiety, enabled us to understand the effect of the anisotropy factor on the crystal packing induced by the C[double bond, length as m-dash]O⋯C tetral interactions. The enhanced anisotropy depreciated the elastic domain, making the oxalate crystals more prone to plastic deformation. Three-point bending experiments and the determined Young's moduli further corroborate the co-existence of the elastic and plastic realm and highlight the critical role of the underlying structural elements that determine the elastic to plastic transformation. The work highlights the possible co-existence of orthogonal mechanical characteristics in molecular crystals and further construed the concurrent role of microscopic and macroscopic elements in attaining this exceptional mechanical trait.

Catalytic Stereoconvergent Synthesis of Homochiral β-CF3, β-SCF3, and β-OCF3 Benzylic Alcohols

We describe an efficient catalytic strategy for enantio- and diastereoselective synthesis of homochiral β-CF₃, β-SCF₃, and β-OCF₃ benzylic alcohols. The approach is based on dynamic kinetic resolution (DKR) with Noyori–Ikariya asymmetric transfer hydrogenation leading to simultaneous construction of two contiguous stereogenic centers with up to 99.9% ee, up to 99.9:0.1 dr, and up to 99% isolated yield. The origin of the stereoselectivity and racemization mechanism of DKR is rationalized by density functional theory calculations. Applicability of the previously inaccessible chiral fluorinated alcohols obtained by this method in two directions is further demonstrated: As building blocks for pharmaceuticals, illustrated by the synthesis of heat shock protein 90 inhibitor with in vitro anticancer activity, and in particular, needle-shaped crystals of representative stereopure products that exhibit either elastic or plastic flexibility, which opens the door to functional materials based on mechanically responsive chiral molecular crystals.

Recrystallization solvent-dependent elastic/plastic flexibility of an n-dodecyl-substituted tetrachlorophthalimide

A long alkyl-chained organic molecule, 4,5,6,7-tetrachloro-2-dodecylisoindoline-1,3-dione (1), was crystallized into needle-like crystals in dichloromethane (1DCM) or plate-like ones in tetrahydrofuran (1THF) depending on the recrystallisation solvent. X-ray crystallography analyses revealed the alkyl chains of the molecules, in which they were assembled differently, with the former responding flexibly bendable and elastic deformation, and the later being a permanent plastic one by external mechanical stress. The elastic modulus (E) and hardness (H) indicating both compliant and soft nature, reflecting their weak interaction in crystals, were quantified from the nano-indentation test.

Indomethacin Polymorph δ Revealed To Be Two Plastically Bendable Crystal Forms by 3D Electron Diffraction: Correcting a 47-Year-Old Misunderstanding

Indomethacin is a clinically classical non-steroidal anti-inflammatory drug that has been marketed since 1965. The third polymorph, Form δ, was discovered by both melt and solution crystallization in 1974. δ-indomethacin cannot be cultivated as large single crystals suitable for X-ray crystallography and, therefore, its crystal structure has not yet been determined. Here, we report the structure elucidation of δ-indomethacin by 3D electron diffraction and reveal the truth that melt-crystallized and solution-crystallized δ-indomethacin are in fact two polymorphs with different crystal structures. We propose to keep the solution-crystallized polymorph as Form δ and name the melt-crystallized polymorph as Form θ. Intriguingly, both structures display plastic flexibility based on a slippage mechanism, making indomethacin the first drug to have two plastic polymorphs. This discovery and correction of a 47-year-old misunderstanding signify that 3D electron diffraction has become a powerful tool for polymorphic structural studies.

Evaluating structure-property relationship in a new family of mechanically flexible co-crystals

A structure-property analysis of ten compositionally and chemically similar co-crystals of N-(pyridin-2-yl)alkylamides and carboxylic acids show that three co-crystals of targets bearing a methyl chain were brittle, while the remaining...

Deformation-induced phosphorescence shift in a 2D elastically flexible organic single crystal: role of chalcogen-centered weak interactions

Mechanically responsive organic luminescent crystals are one of the promising choices of materials for flexible photonic devices. However, the change in phosphorescence emission as a function of the flexibility of a crystal has never been reported. Our current findings demonstrate two-dimensional (2D) and one-dimensional (1D) macroscopic elastic deformability, under mechanical stress, in elastically flexible single crystals of dibenzothiophene, and its brominated derivative, respectively. Unlike the presence of dual fluorescence (FL) and room temperature phosphorescence (RTP) in dibenzothiophene single crystals, the derivative was found to show only RTP. Interestingly, upon elastic deformation, single crystals of the dual emissive dibenzothiophene show a noticeable blue shift (∼20 nm) of RTP emission when compared to their pristine crystals (straight and naturally bent). However, their FL peaks remain nearly unchanged irrespective of the crystal deformation. A hierarchy of structure-elastic functionality to RTP modulation has been quantitatively mapped by rationalizing the role of chalcogen-involved weak interactions.

In response to macroscopic elastical bending, single crystals of dual emissive dibenzothiophene depict a significant blue shift (∼20 nm) of RTP emission when compared to their pristine crystals (straight and naturally bent).

Recent advances in studying the nonnegligible role of noncovalent interactions in various types of energetic molecular crystals

This highlight summarizes the research progress on the considerable effects of noncovalent interactions on diverse types of energetic materials and enlighten us to explore new factors that affect the key performance of explosives.

Temperature-Reliant Dynamic Properties and Elasto-Plastic to Plastic Crystal (Rotator) Phase Transition in a Metal Oxyacid Salt

Although, dynamic crystals are attractive for use in many technologies, molecular level mechanisms of various solid-state dynamic processes and their interdependence, remain poorly understood. Here, we report a rare example of a dynamic crystal (1), involving a heavy transition metal, rhenium, with an initial two-face elasticity (within ≈1 % strain), followed by elasto-plastic deformation, at room temperature. Further, these crystals transform to a rotator (plastic) crystal phase at ≈105 °C, displaying exceptional malleability. Qualitative and quantitative mechanical tests, X-ray diffraction, μ-Raman and polarized light microscopy experiments reveal that the elasto-plastic deformation involves both partial molecular rotations and slip, while malleability in the rotator phase is facilitated by reorientational motions and increased symmetry (slip planes). Our work, connecting the plastically bendable (1D or 2D) crystals with the rotator phases (3D), is important for designing multi-functional dynamic crystals.

Bending for Better: Flexible Organic Single Crystals with Controllable Curvature and Curvature-Related Conductivity for Customized Electronic Devices

Electronic microdevices of self-bending coronene crystals are developed to reveal an unexplored link between mechanical deformation and crystal function. First, a facile approach towards length/width/curvature-controllable micro-crystals through bottom-up solution crystallization was proposed for high processability and stability. The bending crystal devices show a significant increase beyond seven orders of magnitude in conductivity than the straight ones, providing the first example of deformation-induced function enhancement in crystal materials. Besides, double effects caused by bending, including the change of π electron level as well as the enhancement of carrier mobility, were determined, respectively by the X-ray photoelectric spectroscopy and X-ray crystallography to coexist, contributing to the conductivity improvement. Our findings will promote future creation of flexible organic crystal systems with deformation-enhanced functional features towards customized smart devices.

Mechanically compliant single crystals of a stable organic radical

Mechanically compliant organic crystals are the foundation of the development of future flexible, light-weight single-crystal electronics, and this requires reversibly deformable crystalline organic materials with permanent magnetism. Here, we report and characterize the first instance of a plastically bendable single crystal of a permanent organic radical, 4-(4'-cyano-2',3',4',5'-tetrafluorophenyl)-1,2,3,5-dithiadiazolyl. The weak interactions between the radicals render single crystals of the β phase of this material exceedingly soft, and the S-N interactions facilitate plastic bending. EPR imaging of a bent single crystal reveals the effect of deformation on the three-dimensional spin density of the crystal. The unusual mechanical compliance of this material opens prospects for exploration into flexible crystals of other stable organic radicals towards the development of flexible light-weight organic magnetoresistance devices based on weak, non-hydrogen-bonded interactions in molecular crystals.

Dynamic effects in crystalline coordination polymers

Dynamic macroscopic behaviour of single crystals of coordination polymers when subjected to light, heat, and mechanical force.

A plastically bendable and polar organic crystal

An organic crystal of the polar space group Pc that is capable of plastic bending is reported, and its high dielectric constant and strong second-order harmonic generation (SHG) effect have been demonstrated.

Potential and challenges of engineering mechanically flexible molecular crystals

Crystal adaptronics has undergone tremendous developments that have been utilized to rationalize dynamics in crystals. This highlight discusses about the role of intermolecular interactions in rationalizing mechanical responses in crystals.

Determining the mechanisms of deformation in flexible crystals using micro-focus X-ray diffraction

A newly developed methodology allows for the determination of the mechanisms of deformation in flexible crystals with atomic precision. With broader applications, mapping experiments have wide reaching potential within the field of materials science.