Understanding molecular surface doping of large bandgap organic semiconductors and overcoming the contact/access resistance in organic field-effect transistors

Dedoping of Intraband Silver Selenide Colloidal Quantum Dots through Strong Electronic Coupling at Organic/Inorganic Hybrid Interfaces

Colloidal quantum dot (CQD) infrared (IR) photodetectors can be fabricated and operated with larger spectral tunability, fewer limitations in terms of cooling requirements and substrate lattice matching, and at a potentially lower cost than detectors based on traditional bulk materials. Silver selenide (Ag2Se) has emerged as a promising sustainable alternative to current state-of-the-art toxic semiconductors based on lead, cadmium, and mercury operating in the IR. However, an impeding gap in available absorption bandwidth for Ag2Se CQDs exists in the short-wave infrared (SWIR) region due to degenerate doping by the environment, switching the CQDs from intrinsic interband semiconductors in the near-infrared (NIR) to intraband absorbing CQDs in the mid-wave infrared (MWIR). Herein, we show that the small molecular p-type dopant 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4-TCNQ) can be used to extract electrons from the 1Se state of MWIR active Ag2Se CQDs to activate their intrinsic energy gap in the SWIR window. We demonstrate quenching of the MWIR Ag2Se absorbance peak, shifting of nitrile vibrational peaks characteristic of charge-neutral F4-TCNQ, as well as enhanced CQD absorption around ∼2500 nm after doping both in ambient and under air-free conditions. We elucidate the doping mechanism to be one that involves an integer charge transfer akin to doping in semiconducting polymers. These indications of charge transfer are promising milestones on the path to achieving sustainable SWIR Ag2Se CQD photodetectors.

Charge-Transfer Complexes in Organic Field-Effect Transistors: Superior Suitability for Surface Doping

We demonstrate the key role of charge-transfer complexes in surface doping as a successful methodology for improving channel field-effect mobility and reducing the threshold voltage in organic field-effect transistors (OFETs), as well as raising the film conductivity. Demonstrated here for 2,7-dioctyl[1]benzothieno[3,2-b][1]benzothiophene (C₈-BTBT) doped with 2,2'-(perfluoronaphthalene-2,6-diylidene)dimalononitrile (F₆TCNNQ), channel doping by sequential deposition is consistently rationalized by the development of a cocrystalline structure that forms and evolves from the surface of the organic semiconductor film without trading the thin-film structure integrity. This scenario brings higher benefits for the device operation than doping by codeposition, where a decrease in the field-effect mobility of the device, even for a dopant content of only 1 mol %, makes codeposition less suitable. Insight into the structural and electronic properties of the interface satisfactorily explains the improved performance of OFETs upon the incorporation of the dopant and provides an understanding of the mechanism of doping in this system.

Enhanced Performance of Organic Field-Effect Transistors by a Molecular Dopant with High Electron Affinity

Organic field-effect transistors (OFETs) are attractive for next-generation electronics, while doping plays an important role in their performance optimization. In this work, a soluble molecular dopant with high electron affinity, CN6-CP, is investigated to manipulate the performance of OFETs with a p-type organic semiconductor as the transport layer. The performance of the model 2,7-didodecyl[1]benzothieno[3,2-b][1]benzothiophene (C12-BTBT) bottom-gate top-contact (BGTC) OFETs is greatly optimized upon doping by CN6-CP, and the field-effect mobility is improved from 5.5 to 11.1 cm2 V-1 s-1, with a widely tunable threshold voltage from -40 to +5 V. Improvements in performance also appear in CN6-CP doped BGBC OFETs. As compared with commonly used molecular dopant F4-TCNQ, CN6-CP exhibits excellent doping effects and great potential for organic electronic applications.

Advanced Organic Transistor-Based Sensors Utilizing a Solvatochromic Medium with Twisted Intramolecular Charge-Transfer Behavior and Its Application to Ammonia Gas Detection

Here, we designed and developed an organic field-effect transistor (OFET)-based gas sensor by applying solvatochromic dye (Nile red, NR) with twisted intramolecular charge-transfer (TICT) behavior depending on the polarity of the surrounding molecules, as an auxiliary NR sensing medium (aNR-SM). As a polar molecule approaches, intra-charge transfers from the donor diethylamine group to the ketone group occur in the NR molecule, resulting in the twisting of the donor functional group and thereby increasing its dipole moment. Using this characteristic, NR was applied as an auxiliary sensing medium to the OFET for detecting ammonia (NH₃), a representative toxic gas. The Top-NR case, where the aNR-SM covers only the top of the organic semiconductor layer, showed the best gas sensing performance, and its response and recovery rates were improved by 46 and 94%, respectively, compared to the pristine case. More importantly, a sensitivity of 0.87 ± 0.045 ppm^-1 % was measured, having almost perfect linearity (0.999) over the range of measured NH₃ concentrations, which is the result of solving the saturation problem in the sensing characteristics of the OFET-based gas sensor. Our result not only improved the sensing performance of the OFET-based sensor but also made an important advance in that the reliability of the sensing performance was easily secured by applying solvatochromic and TICT behaviors of an auxiliary sensing medium.

Bulk versus Contact Doping in Organic Semiconductors

This study presents a comparative theoretical analysis of different doping schemes in organic semiconductor devices. Especially, an in-depth investigation into bulk and contact doping methods is conducted, focusing on their direct impact on the terminal characteristics of field-effect transistors. We use experimental data from a high-performance undoped organic transistor to prepare a base simulation framework and carry out a series of predictive simulations with various position- and density-dependent doping conditions. Bulk doping is shown to offer an overall effective current modulation, while contact doping proves to be rather useful to overcome high-barrier contacts. We additionally demonstrate the concept of selective channel doping as an alternative and establish a critical understanding of device performances associated with the key electrostatic features dictated by interfaces and applied voltages.

Organic single crystals of cyano-substituted p-phenylene vinylene derivatives as transistors with low surface trap density

We obtained two high-quality lamellar crystals of cayno-substituted p-phenylene vinylene derivatives and fabricated their transistors. The transistors demonstrated hysteresis-free, low subthreshold swing values of 0.15 and 0.10 V dec-1, and high mobilities of 0.56 and 2.73 cm2 V-1 s-1, respectively. More importantly, the low defect density of 1 per 9.22 × 103 and 1.82 × 104 molecules, respectively, confirmed their high crystal quality.