A theoretical study of atomically dispersed MN4/C (M = Fe or Mn) as a high-activity catalyst for the oxygen reduction reaction

Nitrogen, sulfur co-coordinated iron single-atom catalysts with the optimized electronic structure for highly efficient oxygen reduction in Zn-air battery and fuel cell

Atomically dispersed iron-nitrogen-carbon (FesbndNsbndC) materials have been considered ideal catalysts for the oxygen reduction. Unfortunately, designing and adjusting the electronic structure of single-atom Fe sites to boost the kinetics and activity still faces grand challenges. In this work, the coordination environment engineering is developed to synthesize the FeSA/NSC catalyst with the tailored N, S co-coordinated Fe atomic site (Fe-N3S site). The structural characterizations and theoretical calculations demonstrate that the incorporation of sulfur can optimize the charge distribution of Fe atoms to weaken the adsorption of OH* and facilitate the desorption of OH*, thus leading to enhanced kinetics process and intrinsic activity. As a result, the S-modified FeSA/NSC exhibits outstanding catalytic activity with the half-wave potentials (E1/2) of 0.915 V and 0.797 V, as well as good stability, in alkaline and acidic electrolytes, respectively. Impressively, the excellent performance of FeSA/NSC is further confirmed in Zn-air batteries (ZABs) and fuel cells, with high peak power densities (146 mW cm-2 and 0.259 W cm-2).

Precise Engineering of the Electrocatalytic Activity of FeN4-Embedded Graphene on Oxygen Electrode Reactions by Attaching Electrides

Using first-principles calculations combined with a constant-potential implicit solvent model, we comprehensively studied the activity of oxygen electrode reactions catalyzed by electride-supported FeN4-embedded graphene (FeN4Cx). The physical quantities in FeN4Cx/electrides, i.e., work function of electrides, interlayer spacing, stability of heterostructures, charge transferred to Fe, d-band center of Fe, and adsorption free energy of O, are highly intercorrelated, resulting in activity being fully expressed by the nature of the electrides themselves, thereby achieving a precise modulation in activity by selecting different electrides. Strikingly, the FeN4PDCx/Ca2N and FeN4PDCx/Y2C systems maintain a high oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) activity with the overpotential less than 0.46 and 0.62 V in a wide pH range. This work provides an effective strategy for the rational design of efficient bifunctional catalysts as well as a model system with a simple activity-descriptor, helping to realize significant advances in energy devices.

Enhanced Four-Electron Selective Oxygen Reduction Reaction at Carbon-Nanotube-Supported Sulfonic-Acid-Functionalized Copper Phthalocyanine

In the present work, the oxygen reduction reaction (ORR) is explored in an acidic medium with two different catalytic supports (multi-walled carbon nanotubes (MWCNTs) and nitrogen-doped multi-walled carbon nanotubes (NMWCNTs)) and two different catalysts (copper phthalocyanine (CuPc) and sulfonic acid functionalized CuPc (CuPc-SO3 - )). The composite, NMWCNTs-CuPc-SO3 - exhibits high ORR activity (assessed based on the onset potential (0.57 V vs. reversible hydrogen electrode) and Tafel slope) in comparison to the other composites. Rotating ring disc electrode (RRDE) studies demonstrate a highly selective four-electron ORR (less than 2.5 % H2 O2 formation) at the NMWCNTs-CuPc-SO3 - . The synergistic effect of the catalyst support (NMWCNTs) and sulfonic acid functionalization of the catalyst (in CuPc-SO3 - ) increase the efficiency and selectivity of the ORR at the NMWCNTs-CuPc-SO3 - . The catalyst activity of NMWCNTs-CuPc-SO3 - has been compared with many reported materials and found to be better than several catalysts. NMWCNTs-CuPc-SO3 - shows high tolerance for methanol and very small deviation in the onset potential (10 mV) between the linear sweep voltammetry responses recorded before and after 3000 cyclic voltammetry cycles, demonstrating exceptional durability. The high durability is attributed to the stabilization of CuPc-SO3 - by the additional coordination with nitrogen (Cu-Nx ) present on the surface of NMWCNTs.

Influence of coordination structure of Fe-585DV/NxC4-x on the electrocatalytic performance of oxygen reduction reactions

Fe-N-C material, known for its high efficiency, cost-effectiveness, and environmental friendliness, is a promising electrocatalyst in the field of the oxygen reduction reaction (ORR). However, the influence of defects and coordination structures on the catalytic performance of Fe-N-C has not been completely elucidated. In our present investigation, based on density functional theory, we take an Fe adsorbed graphene structure containing a 5-8-5 divacancy (585DV) defect as a research model and investigate the influence of the coordination number of N atoms around Fe (Fe-NxC(4-x)) on the ORR electrocatalyst behavior in alkaline conditions. We find that the Fe-N4 structure exhibits superior ORR catalytic performance than other N coordination structures Fe-NxC4-x (x = 0-3). We explore the reasons for the improved catalytic performance through electronic structure analysis and find that as the N coordination number in the Fe-NxC(4-x) structure increases, the magnetic moment of the Fe single atom decreases. This reduction is conducive to the ORR catalytic performance, indicating that a lower magnetic moment is more favorable for the catalytic process of the ORR within the Fe-NxC(4-x) structure. This study is of great significance for a deeper understanding of the structure-performance relationship in catalysis, as well as for the development of efficient ORR catalysts.

Rational design of M-N4-Gr/V2C heterostructures as highly active ORR catalysts: a density functional theory study

Inspired by the composites of N-doped graphene and transition metal-based materials as well as MXene-based materials, heterostructures (M-N₄-Gr/V₂C) of eight different transition metals (M = Ti, Cr, Mn, Fe, Co, Ni, Cu, and Zn) doped with nitrogen-coordinated graphene and V₂C as potential catalysts for the oxygen reduction reaction (ORR) using density functional theory (DFT) were designed and are described herein. The calculations showed that the heterostructure catalysts (except for Zn-N₄-Gr/V₂C) were thermodynamically stable. Ni-N₄-Gr/V₂C and Co-N₄-Gr/V₂C showed higher activities towards the ORR, with overpotentials as low as 0.32 and 0.45 V, respectively. Excellent catalytic performance results were observed from the change in electronic structure caused by the strong interaction between V₂C and the graphene layers as well as the synergistic effect between the MN₄ groups and the graphene layers. This study further provides insights into the practical application of ORR catalysts for MXene systems through the modulation of the electronic structure of two-dimensional materials.

A DFT study on the activity origin of Fe-N-C sites for oxygen reduction reaction

Iron-nitrogen-carbon materials have been known as the most promising non-noble metal catalyst for proton-exchange membrane fuel cells (PEMFCs), but the genuine active sites for oxygen reduction reaction (ORR) are still arguable. Herein, by the thorough density functional theory investigations, we unravel that the planar Fe2N6 site exhibits excellent ORR catalytic activity over both FeN 3 and FeN 4 sites, and the potential-determining step is determined to be the *OH hydrogenation step with an overpotential of 0.415 V. The ORR activity of Fe 2 N 6 site originates from the low spin magnetic moment (1.11 μ B ), which leads to high antibonding states and low d-band center of the Fe center, further leads to weak binding strength of *OH species. And the density of FeN 4 sites only has little influence on the ORR activity due to the similar interaction between active site and intermediates in ORR. Our research sheds light on the activity origin of iron-nitrogen-carbon materials for ORR.

Exploring high-efficiency electrocatalysts of metal-doped two-dimensional C4N for oxygen reduction, oxygen evolution, and hydrogen evolution reactions by first-principles screening

The HER/ORR/OER on 3d, 4d, and 5d transition metal doped C4N are studied using DFT methods.