Catalyst-electrolyte interface chemistry for electrochemical CO2 reduction

Single Entity Electrocatalysis

Making a measurement over millions of nanoparticles or exposed crystal facets seldom reports on reactivity of a single nanoparticle or facet, which may depart drastically from ensemble measurements. Within the past 30 years, science has moved toward studying the reactivity of single atoms, molecules, and nanoparticles, one at a time. This shift has been fueled by the realization that everything changes at the nanoscale, especially important industrially relevant properties like those important to electrocatalysis. Studying single nanoscale entities, however, is not trivial and has required the development of new measurement tools. This review explores a tale of the clever use of old and new measurement tools to study electrocatalysis at the single entity level. We explore in detail the complex interrelationship between measurement method, electrocatalytic material, and reaction of interest (e.g., carbon dioxide reduction, oxygen reduction, hydrazine oxidation, etc.). We end with our perspective on the future of single entity electrocatalysis with a key focus on what types of measurements present the greatest opportunity for fundamental discovery.

Catalytic Peculiarity of Alkali Metal Cation-Free Electrode/Polyelectrolyte Interfaces Toward CO2 Reduction

A prominent feature of modern electrochemical technologies, such as fuel cells and electrolysis, is the employing of polyelectrolytes instead of liquid electrolytes. Unlike the well-studied electrode/liquid electrolyte interfaces, however, the catalytic characteristics of electrode/polyelectrolyte interfaces remain largely unexplored, mostly due to the lack of reliable probing methods. Herein, we report a universally applicable approach to investigating electrocatalytic reactions at electrode/polyelectrolyte interfaces under normal electrochemical conditions. By coating a thin layer of anion-exchange membrane (AEM) onto the electrode surface, solutions with bulky organic cations were well separated, thus a pure electrode/polyelectrolyte interface can be established in a regular electrochemical setup and studied using in situ spectroscopies, e.g., attenuated total reflectance surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS). We found that the blank Au surface was inert toward the CO2 reduction reaction (CO2RR) in the absence of alkali metal cations, whereas coating with an AEM can dramatically turn on the catalytic activity. ATR-SEIRAS revealed that the hydrogen bond network of water at the Au/AEM interface was enhanced in comparison to that on the blank Au surface, which facilitated the hydrogenation process of the CO2RR. These findings further our fundamental understanding of the catalytic behavior of electrode/polyelectrolyte interfaces and benefit the development of relevant electrochemical technologies.

d-band center engineering of single Cu atom and atomic Ni clusters for enhancing electrochemical CO2 reduction to CO

The rational design of catalysts with atomic dispersion and a deep understanding of the catalytic mechanism is crucial for achieving high performance in CO2 reduction reaction (CO2RR). Herein, we present an atomically dispersed electrocatalyst with single Cu atom and atomic Ni clusters supported on N-doped mesoporous hollow carbon sphere (CuSANiAC/NMHCS) for highly efficient CO2RR. CuSANiAC/NMHCS demonstrates a remarkable CO Faradaic efficiency (FECO) exceeding 90% across a potential range of -0.6 to -1.2 V vs. reversible hydrogen electrode (RHE) and achieves its peak FECO of 98% at -0.9 V vs. RHE. Theoretical studies reveal that the electron redistribution and modulated electronic structure-notably the positive shift in d-band center of Ni 3d orbital-resulting from the combination of single Cu atom and atomic Ni clusters markedly enhance the CO2 adsorption, facilitate the formation of *COOH intermediate, and thus promote the CO production activity. This study offers fresh perspectives on fabricating atomically dispersed catalysts with superior CO2RR performance.

Reactive capture and electrochemical conversion of CO2 with ionic liquids and deep eutectic solvents

Ionic liquids (ILs) and deep eutectic solvents (DESs) have tremendous potential for reactive capture and conversion (RCC) of CO2 due to their wide electrochemical stability window, low volatility, and high CO2 solubility. There is environmental and economic interest in the direct utilization of the captured CO2 using electrified and modular processes that forgo the thermal- or pressure-swing regeneration steps to concentrate CO2, eliminating the need to compress, transport, or store the gas. The conventional electrochemical conversion of CO2 with aqueous electrolytes presents limited CO2 solubility and high energy requirement to achieve industrially relevant products. Additionally, aqueous systems have competitive hydrogen evolution. In the past decade, there has been significant progress toward the design of ILs and DESs, and their composites to separate CO2 from dilute streams. In parallel, but not necessarily in synergy, there have been studies focused on a few select ILs and DESs for electrochemical reduction of CO2, often diluting them with aqueous or non-aqueous solvents. The resulting electrode-electrolyte interfaces present a complex speciation for RCC. In this review, we describe how the ILs and DESs are tuned for RCC and specifically address the CO2 chemisorption and electroreduction mechanisms. Critical bulk and interfacial properties of ILs and DESs are discussed in the context of RCC, and the potential of these electrolytes are presented through a techno-economic evaluation.

Reaction Environment Regulation for Electrocatalytic CO2 Reduction in Acids

The electrocatalytic CO2 reduction reaction (CO2RR) is a sustainable route for converting CO2 into value-added fuels and feedstocks, advancing a carbon-neutral economy. The electrolyte critically influences CO2 utilization, reaction rate and product selectivity. While typically conducted in neutral/alkaline aqueous electrolytes, the CO2RR faces challenges due to (bi)carbonate formation and its crossover to the anolyte, reducing efficiency and stability. Acidic media offer promise by suppressing these processes, but the low Faradaic efficiency, especially for multicarbon (C2+) products, and poor electrocatalyst stability persist. The effective regulation of the reaction environment at the cathode is essential to favor the CO2RR over the competitive hydrogen evolution reaction (HER) and improve long-term stability. This review examines progress in the acidic CO2RR, focusing on reaction environment regulation strategies such as electrocatalyst design, electrode modification and electrolyte engineering to promote the CO2RR. Insights into the reaction mechanisms via in situ/operando techniques and theoretical calculations are discussed, along with critical challenges and future directions in acidic CO2RR technology, offering guidance for developing practical systems for the carbon-neutral community.

Easily constructed porous silver films for efficient catalytic CO2 reduction and Zn-CO2 batteries

For the electroreduction of carbon dioxide into high value-added chemicals, highly active and selective catalysts are crucial, and metallic silver is one of the most intriguing candidate materials available at a reasonable cost. Herein, through a novel two-step operation of Ag paste/SBA-15 coating and HF etching, porous silver films on a commercial carbon paper with a waterproofer (p-Ag/CP) could be easily fabricated on a large scale as highly efficient carbon dioxide reduction reaction (CO2RR) electrocatalysts with a CO Faraday efficiency (FECO) as high as 96.7% at -1.0 V vs. the reversible hydrogen electrode (RHE), and it still reaches up to 90% FECO over applied potentials ranging from -0.8 to -1.1 V vs. the RHE. Meanwhile, the membrane electrode assembly (MEA) utilizing the p-Ag/CP catalyst has achieved a current density, FECO, and stability of ∼60 mA cm-2, >91%, and 11 h, respectively. Furthermore, the assembled aqueous Zn-CO2 battery using p-Ag/CP cathode yielded a peak power density of 0.34 mW cm-2, 75 charge-discharge cycles for 25 h, and 64% FECO at 2.5 mA cm-2. Compared with flat Ag/CP, the significant enhancement in the CO2RR activity of p-Ag/CP was mainly attributed to the distinctive porous structure and an improved three-phase boundary, which is capable of inducing the stabilization of *COOH intermediates, increased active specific surface areas, fast electron transfer kinetic and mass transportation. Further, theoretical calculations revealed that p-Ag/CP possessed an optimized energy barrier for *COOH intermediates.

Atomic/molecular layer deposition strategies for enhanced CO2 capture, utilisation and storage materials

Elevated levels of carbon dioxide (CO2) in the atmosphere and the diminishing reserves of fossil fuels have raised profound concerns regarding the resulting consequences of global climate change and the future supply of energy. Hence, the reduction and transformation of CO2 not only mitigates environmental pollution but also generates value-added chemicals, providing a dual remedy to address both energy and environmental challenges. Despite notable advancements, the low conversion efficiency of CO2 remains a major obstacle, largely attributed to its inert chemical nature. It is imperative to engineer catalysts/materials that exhibit high conversion efficiency, selectivity, and stability for CO2 transformation. With unparalleled precision at the atomic level, atomic layer deposition (ALD) and molecular layer deposition (MLD) methods utilize various strategies, including ultrathin modification, overcoating, interlayer coating, area-selective deposition, template-assisted deposition, and sacrificial-layer-assisted deposition, to synthesize numerous novel metal-based materials with diverse structures. These materials, functioning as active materials, passive materials or modifiers, have contributed to the enhancement of catalytic activity, selectivity, and stability, effectively addressing the challenges linked to CO2 transformation. Herein, this review focuses on ALD and MLD's role in fabricating materials for electro-, photo-, photoelectro-, and thermal catalytic CO2 reduction, CO2 capture and separation, and electrochemical CO2 sensing. Significant emphasis is dedicated to the ALD and MLD designed materials, their crucial role in enhancing performance, and exploring the relationship between their structures and catalytic activities for CO2 transformation. Finally, this comprehensive review presents the summary, challenges and prospects for ALD and MLD-designed materials for CO2 transformation.

Surfactant Directionally Assembled at the Electrode-Electrolyte Interface for Facilitating Electrocatalytic Aldehyde Hydrogenation

Electrocatalytic hydrogenation of unsaturated aldehydes to unsaturated alcohols is a promising alternative to conventional thermal processes. Both the catalyst and electrolyte deeply impact the performance. Designing the electrode-electrolyte interface remains challenging due to its compositional and structural complexity. Here, we employ the electrocatalytic hydrogenation of 5-hydroxymethylfurfural (HMF) as a reaction model. The typical cationic surfactant, cetyltrimethylammonium bromide (CTAB), and its analogs are employed as electrolyte additives to tune the interfacial microenvironment, delivering high-efficiency hydrogenation of HMF and inhibition of the hydrogen evolution reaction (HER). The surfactants experience a conformational transformation from stochastic distribution to directional assembly under applied potential. This oriented arrangement hampers the transfer of water molecules to the interface and promotes the enrichment of reactants. In addition, near 100 % 2,5-bis(hydroxymethyl)furan (BHMF) selectivity is achieved, and the faradaic efficiency (FE) of the BHMF is improved from 61 % to 74 % at -100 mA cm-2. Notably, the microenvironmental modulation strategy applies to a range of electrocatalytic hydrogenation reactions involving aldehyde substrates. This work paves the way for engineering advanced electrode-electrolyte interfaces and boosting unsaturated alcohol electrosynthesis efficiency.

Copper/Polyaniline Interfaces Confined CO2 Electroreduction for Selective Hydrocarbon Production

Polyaniline (PANI) provides an attractive organic platform for CO2 electrochemical reduction due to the ability to adsorb CO2 molecules and in providing means to interact with metal nanostructures. In this work, a novel PANI supported copper catalyst has been developed by coupling the interfacial polymerization of PANI and Cu. The hybrid catalyst demonstrates excellent activity towards production of hydrocarbon products including CH4 and C2H4, compared with the use of bare Cu. A Faradaic efficiency of 71.8 % and a current density of 16.9 mA/cm2 were achieved at -0.86 V vs. RHE, in contrast to only 22.2 % and 1.0 mA/cm2 from the counterpart Cu catalysts. The remarkably enhanced catalytic performance of the hybrid PANI/Cu catalyst can be attributed to the synergistic interaction between the PANI underlayer and copper. The PANI favours the adsorption and binding of CO2 molecules via its nitrogen sites to form *CO intermediates, while the Cu/PANI interfaces confine the diffusion or desorption of the *CO intermediates favouring their further hydrogenation or carbon-carbon coupling to form hydrocarbon products. This work provides insights into the formation of hydrocarbon products on PANI-modified Cu catalysts, which may guide the development of conducting polymer-metal catalysts for CO2 electroreduction.

Synthesis of a Triangle-Fused Six-Pointed Star and Its Electrocatalytic CO2 Reduction Activity

As electrocatalysts, molecular catalysts with large aromatic systems (such as terpyridine, porphyrin, or phthalocyanine) have been widely applied in the CO2 reduction reaction (CO2RR). However, these monomeric catalysts tend to aggregate due to strong π-π interactions, resulting in limited accessibility of the active site. In light of these challenges, we present a novel strategy of active site isolation for enhancing the CO2RR. Six Ru(Tpy)2 were integrated into the skeleton of a metallo-organic supramolecule by stepwise self-assembly in order to form a rhombus-fused six-pointed star R1 with active site isolation. The turnover frequency (TOF) of R1 was as high as 10.73 s-1 at -0.6 V versus reversible hydrogen electrode (vs RHE), which is the best reported value so far at the same potential to our knowledge. Furthermore, by increasing the connector density on R1's skeleton, a more stable triangle-fused six-pointed star T1 was successfully synthesized. T1 exhibits exceptional stability up to 126 h at -0.4 V vs RHE and excellent TOF values of CO. The strategy of active site isolation and connector density increment significantly enhanced the catalytic activity by increasing the exposure of the active site. This work provides a starting point for the design of molecular catalysts and facilitates the development of a new generation of catalysts with a high catalytic performance.

Theoretical Study of Electrocatalytic CO2 Reduction Mechanism on Typical MXenes under Realistic Conditions

MXenes are a revolutionary class of two-dimensional materials that have been recently demonstrated to exhibit promising capability of electrocatalytic CO2 reduction reaction (CO2RR) in theory and experiment. In electrocatalytic reactions, the active phases, the mechanism, and the performance can be greatly influenced by electrochemical conditions such as applied electrode potential, pH, and electrolyte. Therefore, in this first-principles study, the stable surface structures of three typical MXenes (V2C, Mo2C, and Ti3C2) with variation of electrocatalytic conditions were determined by the Pourbaix phase diagrams. Additionally, the reaction mechanism for CO2RR toward C1 products was investigated based on the thermal dynamically stable phases. The computation revealed that surfaces of all three MXenes are dominated by H* termination throughout the practical CO2RR electrochemical condition ranges. Meanwhile, the bicarbonate ions, which serve as the major electrolyte in CO2RR, show thermal dynamic unfavorability to adsorb on the surfaces. Among the three types of MXenes, V2CH exhibits higher activity in generating CO and HCOOH through the CO2RR, while Mo2CH exhibits higher activity in producing HCHO, CH3OH, and CH4. This comprehensive study provides crucial insights into the mechanism of electrocatalytic CO2RR on MXenes under realistic electrochemical conditions.

Dynamics of bulk and surface oxide evolution in copper foams for electrochemical CO2 reduction

Oxide-derived copper (OD-Cu) materials exhibit extraordinary catalytic activities in the electrochemical carbon dioxide reduction reaction (CO2RR), which likely relates to non-metallic material constituents formed in transitions between the oxidized and the reduced material. In time-resolved operando experiment, we track the structural dynamics of copper oxide reduction and its re-formation separately in the bulk of the catalyst material and at its surface using X-ray absorption spectroscopy and surface-enhanced Raman spectroscopy. Surface-species transformations progress within seconds whereas the subsurface (bulk) processes unfold within minutes. Evidence is presented that electroreduction of OD-Cu foams results in kinetic trapping of subsurface (bulk) oxide species, especially for cycling between strongly oxidizing and reducing potentials. Specific reduction-oxidation protocols may optimize formation of bulk-oxide species and thereby catalytic properties. Together with the Raman-detected surface-adsorbed *OH and C-containing species, the oxide species could collectively facilitate *CO adsorption, resulting an enhanced selectivity towards valuable C2+ products during CO2RR.

Recent advances in the role of interfacial liquids in electrochemical reactions

The interfacial liquid, situated in proximity to an electrode or catalyst, plays a vital role in determining the activity and selectivity of crucial electrochemical reactions, including hydrogen evolution, oxygen evolution/reduction, and carbon dioxide reduction. Thus, there has been a growing interest in better understanding the behavior and the catalytic effect of its constituents. This minireview examines the impact of interfacial liquids on electrocatalysis, specifically the effects of water molecules and ionic species present at the interface. How the structure of interfacial water, distinct from the bulk, can affect charge transfer kinetics and transport of species is presented. Furthermore, how cations and anions (de)stabilize intermediates and transition states, compete for adsorption with reaction species, and act as local environment modifiers including pH and the surrounding solvent structure are described in detail. These effects can promote or inhibit reactions in various ways. This comprehensive exploration provides valuable insights for tailoring interfacial liquids to optimize electrochemical reactions.

Mechanistic Insights into Surfactant-Modulated Electrode-Electrolyte Interface for Steering H2O2 Electrosynthesis

Electrocatalytic reactions taking place at the electrified electrode-electrolyte interface involve processes of proton-coupled electron transfer. Interfacial protons are delivered to the electrode surface via a H2O-dominated hydrogen-bond network. Less efforts are made to regulate the interfacial proton transfer from the perspective of interfacial hydrogen-bond network. Here, we present quaternary ammonium salt cationic surfactants as electrolyte additives for enhancing the H2O2 selectivity of the oxygen reduction reaction (ORR). Through in situ vibrational spectroscopy and molecular dynamics calculation, it is revealed that the surfactants are irreversibly adsorbed on the electrode surface in response to a given bias potential range, leading to the weakening of the interfacial hydrogen-bond network. This decreases interfacial proton transfer kinetics, particularly at high bias potentials, thus suppressing the 4-electron ORR pathway and achieving a highly selective 2-electron pathway toward H2O2. These results highlight the opportunity for steering H2O-involved electrochemical reactions via modulating the interfacial hydrogen-bond network.

Accelerating the Reaction Kinetics of CO2 Reduction to Multi-Carbon Products by Synergistic Effect between Cation and Aprotic Solvent on Copper Electrodes

Improving the selectivity of electrochemical CO2 reduction to multi-carbon products (C2+ ) is an important and highly challenging topic. In this work, we propose and validate an effective strategy to improve C2+ selectivity on Cu electrodes, by introducing a synergistic effect between cation (Na+ ) and aprotic solvent (DMSO) to the electrolyte. Based on constant potential ab initio molecular dynamics simulations, we first revealed that Na+ facilitates C-C coupling while inhibits CH3 OH/CH4 products via reducing the water network connectivity near the electrode. Furthermore, the water network connectivity was further decreased by introducing an aprotic solvent DMSO, leading to suppression of both C1 production and hydrogen evolution reaction with minimal effect on *OCCO* hydrogenation. The synergistic effect enhancing C2 selectivity was also experimentally verified through electrochemical measurements. The results showed that the Faradaic efficiency of C2 increases from 9.3 % to 57 % at 50 mA/cm2 under a mixed electrolyte of NaHCO3 and DMSO compared to a pure NaHCO3 , which can significantly enhance the selectivity of the C2 product. Therefore, our discovery provides an effective electrolyte-based strategy for tuning CO2 RR selectivity through modulating the microenvironment at the electrode-electrolyte interface.

Selective and Efficient CO2 Electroreduction to Formate on Copper Electrodes Modified by Cationic Gemini Surfactants

Electroreduction of CO2 into valuable chemicals and fuels is a promising strategy to mitigate energy and environmental problems. However, it usually suffers from unsatisfactory selectivity for a single product and inadequate electrochemical stability. Herein, we report the first work to use cationic Gemini surfactants as modifiers to boost CO2 electroreduction to formate. The selectivity, activity and stability of the catalysts can be all significantly enhanced by Gemini surfactant modification. The Faradaic efficiency (FE) of formate could reach up to 96 %, and the energy efficiency (EE) could achieve 71 % over the Gemini surfactants modified Cu electrode. In addition, the Gemini surfactants modified commercial Bi2 O3 nanosheets also showed an excellent catalytic performance, and the FE of formate reached 91 % with a current density of 510 mA cm-2 using the flow cell. Detailed studies demonstrated that the double quaternary ammonium cations and alkyl chains of the Gemini surfactants played a crucial role in boosting electroreduction CO2 , which can not only stabilize the key intermediate HCOO* but also provide an easy access for CO2 . These observations could shine light on the rational design of organic modifiers for promoted CO2 electroreduction.

Local reaction environment in electrocatalysis

Beyond conventional electrocatalyst engineering, recent studies have unveiled the effectiveness of manipulating the local reaction environment in enhancing the performance of electrocatalytic reactions. The general principles and strategies of local environmental engineering for different electrocatalytic processes have been extensively investigated. This review provides a critical appraisal of the recent advancements in local reaction environment engineering, aiming to comprehensively assess this emerging field. It presents the interactions among surface structure, ions distribution and local electric field in relation to the local reaction environment. Useful protocols such as the interfacial reactant concentration, mass transport rate, adsorption/desorption behaviors, and binding energy are in-depth discussed toward modifying the local reaction environment. Meanwhile, electrode physical structures and reaction cell configurations are viable optimization methods in engineering local reaction environments. In combination with operando investigation techniques, we conclude that rational modifications of the local reaction environment can significantly enhance various electrocatalytic processes by optimizing the thermodynamic and kinetic properties of the reaction interface. We also outline future research directions to attain a comprehensive understanding and effective modulation of the local reaction environment.

Investigating Electrode-Ionomer Interface Phenomena for Electrochemical Energy Applications

The endeavor to develop high-performance electrochemical energy applications has underscored the growing importance of comprehending the intricate dynamics within an electrode's structure and their influence on overall performance. This review investigates the complexities of electrode-ionomer interactions, which play a critical role in optimizing electrochemical reactions. Our examination encompasses both microscopic and meso/macro scale functions of ionomers at the electrode-ionomer interface, providing a thorough analysis of how these interactions can either enhance or impede surface reactions. Furthermore, this review explores the broader-scale implications of ionomer distribution within porous electrodes, taking into account factors like ionomer types, electrode ink formulation, and carbon support interactions. We also present and evaluate state-of-the-art techniques for investigating ionomer distribution, including electrochemical methods, imaging, modeling, and analytical techniques. Finally, the performance implications of these phenomena are discussed in the context of energy conversion devices. Through this comprehensive exploration of intricate interactions, this review contributes to the ongoing advancements in the field of energy research, ultimately facilitating the design and development of more efficient and sustainable energy devices.

Small Organic Molecular Electrocatalysts for Fuels Production

In recent years, heterocyclic organic compounds have been explored as molecular electrocatalysts in relevant reactions for energy conversion and storage. Merging mimetics of biological systems that perform hydride transfer with rational synthetic chemical design has opened many opportunities for organic molecules to be tuned at the atomic level conferring them interesting reactivities. These molecular electrocatalysts represent an alternative to traditional metallic materials and metal complexes employed for water oxidation, hydrogen production, and carbon dioxide reduction. This minireview describes recent reports concerning design, catalytic activity and the mechanism of synthetic molecular electrocatalysts towards solar fuels production.

Enhancing Electroreduction CO2 to Hydrocarbons via Tandem Electrocatalysis by Incorporation Cu NPs in Boron Imidazolate Frameworks

Due to the higher value of deeply-reduced products, electrocatalytic CO2 reduction reaction (CO2 RR) to multi-electron-transfer products has received more attention. One attractive strategy is to decouple individual steps within the complicated pathway via multi-component catalysts design in the concept of tandem catalysts. Here, a composite of Cu@BIF-144(Zn) (BIF = boron imidazolate framework) is synthesized by using an anion framework BIF-144(Zn) as host to impregnate Cu2+ ions that are further reduced to Cu nanoparticles (NPs) via in situ electrochemical transformation. Due to the microenvironment modulation by functional BH(im)3 - on the pore surfaces, the Cu@BIF-144(Zn) catalyst exhibits a perfect synergetic effect between the BIF-144(Zn) host and the Cu NP guest during CO2 RR. Electrochemistry results show that Cu@BIF-144(Zn) catalysts can effectively enhance the selectivity and activity for the CO2 reduction to multi-electron-transfer products, with the maximum FECH4 value of 41.8% at -1.6 V and FEC2H4 value of 12.9% at -1.5 V versus RHE. The Cu@BIF-144(Zn) tandem catalyst with CO-rich microenvironment generated by the Zn catalytic center in the BIF-144(Zn) skeleton enhanced deep reduction on the incorporated Cu NPs for the CO2 RR to multi-electron-transfer products.

Catalysts and electrolyzers for the electrochemical CO2 reduction reaction: from laboratory to industrial applications

To cope with the urgent environmental pressure and tight energy demand, using electrocatalytic methods to drive the reduction of carbon dioxide molecules and produce a variety of fuels and chemicals, is one of the effective pathways to achieve carbon neutrality. In recent years, many significant advances in the study of the electrochemical carbon dioxide reduction reaction (CO2RR) have been made, but most of the works exhibit low current density, small electrode area and poor long-term stability, which are not suitable for large-scale industrial applications. Herein, combining the research achievements obtained in laboratories and the practical demand of industrial production, we summarize recent frontier progress in the field of the electrochemical CO2RR, including the fundamentals of catalytic reactions, catalyst design and preparation, and the construction of electrolyzers. In addition, we discuss the bottleneck problem of industrial CO2 electrolysis, and further present the prospect of the essential issues to be solved by the available technology for industrial electrolysis. This review can provide some basic understanding and knowledge accumulation for the development and practical application of electrochemical CO2RR technology.

Charged Microdroplets as Microelectrochemical Cells for CO2 Reduction and C-C Coupling

Charged microdroplets offer novel electrochemical environments, distinct from traditional solid-liquid or solid-liquid-gas interfaces, due to the intense electric fields at liquid-gas interfaces. In this study, we propose that charged microdroplets serve as microelectrochemical cells (MECs), enabling unique electrochemical reactions at the gas-liquid interface. Using electrospray-generated microdroplets, we achieved multielectron CO2 reduction and C-C coupling to synthesize ethanol using molecular catalysts. These catalysts effectively harness and relay electrons, enhancing the longevity of solvated electrons and enabling multielectron reactions. Importantly, we revealed the intrinsic relationship between the size and charge density of a MEC and its reaction selectivity. Employing in situ mass spectrometry, we identified reaction intermediates (molecular catalyst adducts with HCOO) and oxidation products, elucidating the CO2 reduction mechanism and the comprehensive reaction procedure. Our research underscores the promising role of charged microdroplets in pioneering new electrochemical systems.

Hollow carbon-based materials for electrocatalytic and thermocatalytic CO2 conversion

Electrocatalytic and thermocatalytic CO2 conversions provide promising routes to realize global carbon neutrality, and the development of corresponding advanced catalysts is important but challenging. Hollow-structured carbon (HSC) materials with striking features, including unique cavity structure, good permeability, large surface area, and readily functionalizable surface, are flexible platforms for designing high-performance catalysts. In this review, the topics range from the accurate design of HSC materials to specific electrocatalytic and thermocatalytic CO2 conversion applications, aiming to address the drawbacks of conventional catalysts, such as sluggish reaction kinetics, inadequate selectivity, and poor stability. Firstly, the synthetic methods of HSC, including the hard template route, soft template approach, and self-template strategy are summarized, with an evaluation of their characteristics and applicability. Subsequently, the functionalization strategies (nonmetal doping, metal single-atom anchoring, and metal nanoparticle modification) for HSC are comprehensively discussed. Lastly, the recent achievements of intriguing HSC-based materials in electrocatalytic and thermocatalytic CO2 conversion applications are presented, with a particular focus on revealing the relationship between catalyst structure and activity. We anticipate that the review can provide some ideas for designing highly active and durable catalytic systems for CO2 valorization and beyond.

Regulating the Innocuity of Urea Electro-Oxidation via Cation-mediated Adsorption

Urea electrolysis is an emerging technology that bridges efficient wastewater treatment and hydrogen production with lower electricity costs. However, conventional Ni-based catalysts could easily overoxidize urea into the secondary contaminant NOx - , and enhancing the innocuity of urea electrolysis remains a grand challenge to be achieved. Herein, we tailored the electrode-electrolyte interface of an unconventional cation effect on the anodic oxidation of urea to regulate its activity and selectivity. Smaller cations of Li+ were discovered to increase the Faradaic efficiency (FE) of the innocuous N2 product from the standard value of ~15 % to 45 %, while decreasing the FEs of the over-oxidized NOx - product from ~80 % to 46 %, pointing to a more sustainable process. The kinetic and computational analysis revealed the dominant residence of cations on the outer Helmholtz layer, which forms the interactions with the surface adsorbates. The Li+ hydration shells and rigid hydrogen bonding network interact strongly with the adsorbed urea to decrease its adsorption energy and subjection to C-N cleavage, thereby directing it toward the N2 pathway. This work emphasizes the tuning of the interactions within the electrode-electrolyte interface for enhancing the efficiency and sustainability of electrocatalytic processes.

Bioinspired Hydrophobicity for Enhancing Electrochemical CO2 Reduction

Electrochemical carbon dioxide reduction (CO2 R) is a promising pathway for converting greenhouse gasses into valuable fuels and chemicals using intermittent renewable energy. Enormous efforts have been invested in developing and designing CO2 R electrocatalysts suitable for industrial applications at accelerated reaction rates. The microenvironment, specifically the local CO2 concentration (local [CO2 ]) as well as the water and ion transport at the CO2 -electrolyte-catalyst interface, also significantly impacts the current density, Faradaic efficiency (FE), and operation stability. In nature, hydrophobic surfaces of aquatic arachnids trap appreciable amounts of gases due to the "plastron effect", which could inspire the reliable design of CO2 R catalysts and devices to enrich gaseous CO2 . In this review, starting from the wettability modulation, we summarize CO2 enrichment strategies to enhance CO2 R. To begin, superwettability systems in nature and their inspiration for concentrating CO2 in CO2 R are described and discussed. Moreover, other CO2 enrichment strategies, compatible with the hydrophobicity modulation, are explored from the perspectives of catalysts, electrolytes, and electrolyzers, respectively. Finally, a perspective on the future development of CO2 enrichment strategies is provided. We envision that this review could provide new guidance for further developments of CO2 R toward practical applications.

Enrichment Strategies for Efficient CO2 Electroreduction in Acidic Electrolytes

Electrochemical CO2 reduction reaction (CO2 RR) has been recognized as an appealing route to remarkably accelerate the carbon-neutral cycle and reduce carbon emissions. Notwithstanding great catalytic activity that has been acquired in neutral and alkaline conditions, the carbonates generated from the inevitable reaction of the input CO2 with the hydroxide severely lower carbon utilization and energy efficiency. By contrast, CO2 RR in an acidic condition can effectively circumvent the carbonate issues; however, the activity and selectivity of CO2 RR in acidic electrolytes will be decreased significantly due to the competing hydrogen evolution reaction (HER). Enriching the CO2 and the key intermediates around the catalyst surface can promote the reaction rate and enhance the product selectivity, providing a promising way to boost the performance of CO2 RR. In this review, the catalytic mechanism and key technique challenges of CO2 RR are first introduced. Then, the critical progress of enrichment strategies for promoting the CO2 RR in the acidic electrolyte is summarized with three aspects: catalyst design, electrolyte regulation, and electrolyzer optimization. Finally, some insights and perspectives for further development of enrichment strategies in acidic CO2 RR are expounded.

Stability Issues in Electrochemical CO2 Reduction: Recent Advances in Fundamental Understanding and Design Strategies

Electrochemical CO2 reduction reaction (CO2 RR) offers a promising approach to close the anthropogenic carbon cycle and store intermittent renewable energy in fuels or chemicals. On the path to commercializing this technology, achieving the long-term operation stability is a central requirement but still confronts challenges. This motivates to organize the present review to systematically discuss the stability issue of CO2 RR. This review starts from the fundamental understanding on the destabilization mechanisms of CO2 RR, with focus on the degradation of electrocatalyst and change of reaction microenvironment during continuous electrolysis. Subsequently, recent efforts on catalyst design to stabilize the active sites are summarized, where increasing atomic binding strength to resist surface reconstruction is highlighted. Next, the optimization of electrolysis system to enhance the operation stability by maintaining reaction microenvironment especially mitigating flooding and carbonate problems is demonstrated. The manipulation on operation conditions also enables to prolong CO2 RR lifespan through recovering catalytically active sites and mass transport process. This review finally ends up by indicating the challenges and future opportunities.

Observing the Evolution of Metal Oxides in Liquids

Metal oxides with diverse compositions and structures have garnered considerable interest from researchers in various reactions, which benefits from transmission electron microscopy (TEM) in determining their morphologies, phase, structural and chemical information. Recent breakthroughs have made liquid-phase TEM a promising imaging platform for tracking the dynamic structure, morphology, and composition evolution of metal oxides in solution under work conditions. Herein, this review introduces the recent advances in liquid cells, especially closed liquid cell chips. Subsequently, the recent progress including particle growth, phase transformation, self-assembly, core-shell nanostructure growth, and chemical etching are introduced. With the late technical advances in TEM and liquid cells, liquid-phase TEM is used to characterize many fundamental processes of metal oxides for CO2 reduction and water-splitting reactions. Finally, the outlook and challenges in this research field are discussed. It is believed this compilation inspires and stimulates more efforts in developing and utilizing in situ liquid-phase TEM for metal oxides at the atomic scale for different applications.

1,2-Azolylamidino ruthenium(II) complexes with DMSO ligands: electro- and photocatalysts for CO2 reduction

New 1,2-azolylamidino complexes fac-[RuCl(DMSO)3(NHC(R)az*-κ2N,N)]OTf [R = Me (2), Ph (3); az* = pz (pyrazolyl, a), indz (indazolyl, b)] are synthesized via chloride abstraction from their corresponding precursors cis,fac-[RuCl2(DMSO)3(az*H)] (1) after subsequent base-catalyzed coupling of the appropriate nitrile with the 1,2-azole previously coordinated. All the compounds are characterized by 1H NMR, 13C NMR and IR spectroscopy. Those derived from MeCN are also characterized by X-ray diffraction. Electrochemical studies showed several reduction waves in the range of -1.5 to -3 V. The electrochemical behavior in CO2 media is consistent with CO2 electrocatalytic reduction. The catalytic activity expressed as [icat(CO2)/ip(Ar)] ranged from 1.7 to 3.7 for the 1,2-azolylamidino complexes at voltages of ca. -2.7 to -3 V vs. ferrocene/ferrocenium. Controlled potential electrolysis showed rapid decomposition of the Ru catalysts. Photocatalytic CO2 reduction experiments using compounds 1b, 2b and 3b carried out in a CO2-saturated MeCN/TEOA (4 : 1 v/v) solution containing a mixture of the catalyst and [Ru(bipy)3]2+ as the photosensitizer under continuous irradiation (light intensity of 150 mW cm-2 at 25 °C, λ > 300 nm) show that compounds 1b, 2b and 3b allowed CO2 reduction catalysis, producing CO and trace amounts of formate. The combined turnover number for the production of formate and CO is ca. 100 after 8 h and follows the order 1b < 2b ≈ 3b.

Probing Cation Effects on *CO Intermediates from Electroreduction of CO2 through Operando Raman Spectroscopy

Cations in an electrolyte modulate microenvironments near the catalyst surface and affect product distribution from an electrochemical CO2 reduction reaction, and thus, their interaction with intermediate states has been tried to be probed. Herein, we directly observed the cation effect on *CO intermediates on the Cu(OH)2-derived catalyst in real time through operando surface-enhanced Raman spectroscopy at high overpotentials (-1.0 VRHE). Atop *CO peaks are composed of low-frequency binding *CO (*COLFB) and high-frequency binding *CO (*COHFB) because of their adsorption sites. These two *CO intermediates are found to have different sensitivities to the cation-induced field, and each *CO is proposed to be suitably stabilized for efficient C-C coupling. The proportions between *COHFB and *COLFB are dependent on the type of alkali cations, and the increases in the *COHFB ratio have a high correlation with selective C2H4 production under K+ and Cs+, indicating that *COHFB is the dominant and fast active species. In addition, as the hydrated cation size decreases, *COLFB is more sensitively red-shifted than *COHFB, which promotes C-C coupling and suppresses C1 products. Through time-resolved operando measurements, dynamic changes between the two *CO species are observed, showing the rapid initial adsorption of *COHFB and subsequently reaching a steady ratio between *COLFB and *COHFB.

Hydride-doped Ag17Cu10 nanoclusters as high-performance electrocatalysts for CO2 reduction

The atomically precise metal electrocatalysts for driving CO2 reduction reactions are eagerly pursued as they are model systems to identify the active sites, understand the reaction mechanism, and further guide the exploration of efficient and practical metal nanocatalysts. Reported herein is a nanocluster-based electrocatalyst for CO2 reduction, which features a clear geometric and electronic structure, and more importantly excellent performance. The nanocatalysts with the molecular formula of [Ag17Cu10(dppm)4(PhC≡C)20H4]3+ have been obtained in a facile way. The unique metal framework of the cluster, with silver, copper, and hydride included, and dedicated surface structure, with strong (dppm) and labile (alkynyl) ligands coordinated, endow the cluster with excellent performance in electrochemical CO2 reduction reaction to CO. With the atomically precise electrocatalysts in hand, not only high reactivity and selectivity (Faradaic efficiency for CO up to 91.6%) but also long-term stability (24 h), are achieved.

Multiscale CO2 Electrocatalysis to C2+ Products: Reaction Mechanisms, Catalyst Design, and Device Fabrication

Electrosynthesis of value-added chemicals, directly from CO2, could foster achievement of carbon neutral through an alternative electrical approach to the energy-intensive thermochemical industry for carbon utilization. Progress in this area, based on electrogeneration of multicarbon products through CO2 electroreduction, however, lags far behind that for C1 products. Reaction routes are complicated and kinetics are slow with scale up to the high levels required for commercialization, posing significant problems. In this review, we identify and summarize state-of-art progress in multicarbon synthesis with a multiscale perspective and discuss current hurdles to be resolved for multicarbon generation from CO2 reduction including atomistic mechanisms, nanoscale electrocatalysts, microscale electrodes, and macroscale electrolyzers with guidelines for future research. The review ends with a cross-scale perspective that links discrepancies between different approaches with extensions to performance and stability issues that arise from extensions to an industrial environment.

Acidic CO2 Electrolysis Addressing the "Alkalinity Issue" and Achieving High CO2 Utilization

Electrochemical CO2 reduction reaction (CO2 RR) provides a promising approach for sustainable chemical fuel production of carbon neutrality. Neutral and alkaline electrolytes are predominantly employed in the current electrolysis system, but with striking drawbacks of (bi)carbonate (CO3 2- /HCO3 - ) formation and crossover due to the rapid and thermodynamically favourable reaction between hydroxide (OH- ) with CO2 , resulting in low carbon utilization efficiency and short-lived catalysis. Very recently, CO2 RR in acidic media can effectively address the (bi)carbonate issue; however, the competing hydrogen evolution reaction (HER) is more kinetically favourable in acidic electrolytes, which dramatically reduces CO2 conversion efficiency. Thus, it is a big challenge to effectively suppress HER and accelerate acidic CO2 RR. In this review, we begin by summarizing the recent progress of acidic CO2 electrolysis, discussing the key factors limiting the application of acidic electrolytes. We then systematically discuss addressing strategies for acidic CO2 electrolysis, including electrolyte microenvironment modulation, alkali cations adjusting, surface/interface functionalization, nanoconfinement structural design, and novel electrolyzer exploitation. Finally, the new challenges and perspectives of acidic CO2 electrolysis are suggested. We believe this timely review can arouse researchers' attention to CO2 crossover, inspire new insights to solve the "alkalinity problem" and enable CO2 RR as a more sustainable technology.

Unraveling the reaction mechanisms for furfural electroreduction on copper

Electrochemical routes for the valorization of biomass-derived feedstock molecules offer sustainable pathways to produce chemicals and fuels. However, the underlying reaction mechanisms for their electrochemical conversion remain elusive. In particular, the exact role of proton-electron coupled transfer and electrocatalytic hydrogenation in the reaction mechanisms for biomass electroreduction are disputed. In this work, we study the reaction mechanism underlying the electroreduction of furfural, an important biomass-derived platform chemical, combining grand-canonical (constant-potential) density functional theory-based microkinetic simulations and pH dependent experiments on Cu under acidic conditions. Our simulations indicate the second PCET step in the reaction pathway to be the rate- and selectivity-determining step for the production of the two main products of furfural electroreduction on Cu, i.e., furfuryl alcohol and 2-methyl furan, at moderate overpotentials. We further identify the source of Cu's ability to produce both products with comparable activity in their nearly equal activation energies. Furthermore, our microkinetic simulations suggest that surface hydrogenation steps play a minor role in determining the overall activity of furfural electroreduction compared to PCET steps due to the low steady-state hydrogen coverage predicted under reaction conditions, the high activation barriers for surface hydrogenation and the observed pH dependence of the reaction. As a theoretical guideline, low pH (<1.5) and moderate potential (ca. -0.5 V vs. SHE) conditions are suggested for selective 2-MF production.

Dynamic Metal-Ligand Coordination Boosts CO2 Electroreduction

The interfacial structure of heterogeneous catalysts determines the reaction rate by adjusting the adsorption behavior of reaction intermediates. Unfortunately, the catalytic performance of conventionally static active sites has always been limited by the adsorbate linear scaling relationship. Herein, we develop a triazole-modified Ag crystal (Ag crystal-triazole) with dynamic and reversible interfacial structures to break such a relationship for boosting the catalytic activity of CO₂ electroreduction into CO. On the basis of surface science measurements and theoretical calculations, we demonstrated the dynamic transformation between adsorbed triazole and adsorbed triazolyl on the Ag(111) facet induced by metal-ligand conjugation. During CO₂ electroreduction, Ag crystal-triazole with the dynamically reversible transformation of ligands exhibited a faradic efficiency for CO of 98% with a partial current density for CO as high as -802.5 mA cm^-2. The dynamic metal-ligand coordination not only reduced the activation barriers of CO₂ protonation but also switched the rate-determining step from CO₂ protonation to the breakage of C-OH in the adsorbed COOH intermediate. This work provided an atomic-level insight into the interfacial engineering of the heterogeneous catalysts toward highly efficient CO₂ electroreduction.

Upcycling air pollutants to fuels and chemicals via electrochemical reduction technology

The intensification of fossil fuel usage results in significant air pollution levels. Efforts have been put into developing efficient technologies capable of converting air pollution into valuable products, including fuels and valuable chemicals (e.g., CO₂ to hydrocarbon and syngas and NO_x to ammonia). Among the strategic efforts to mitigate the excessive concentration of CO₂ and NO_x pollutants in the atmosphere, the electrochemical reduction technology of CO₂ (CO₂RR) and NO_x (NO_xRR) emerges as one of the most promising approaches. It is even more attractive if CO₂RR and NO_xRR are paired with renewables to store intermittent electricity in the form of chemical feedstocks. This review provides an overview of the electrochemical reduction process to convert CO₂ to C₁ and/or C₂₊ chemicals and NO_x to ammonia (NH₃) with a focus on electrocatalysts, electrolytes, electrolyzer, and catalytic reactor designs toward highly selective electrochemical conversion of the desired products. While the attempts in these aspects are enormous, economic consideration and environmental feasibility for actual implementation are not comprehensively provided. We discuss CO₂RR and NO_xRR from the life cycle and techno-economic analyses to perceive the feasibility of the current achievements. The remaining challenges associated with the industrial implementation of electrochemical CO₂ and NO_x reduction are additionally provided.

Revisiting the Role of Discharge Products in Li-CO2 Batteries

Rechargeable lithium-carbon dioxide (Li-CO2 ) batteries are promising devices for CO2 recycling and energy storage. However, thermodynamically stable and electrically insulating discharge products (DPs) (e.g., Li2 CO3 ) deposited at cathodes require rigorous conditions for completed decomposition, resulting in large recharge polarization and poor battery reversibility. Although progress has been achieved in cathode design and electrolyte optimization, the significance of DPs is generally underestimated. Therefore, it is necessary to revisit the role of DPs in Li-CO2 batteries to boost overall battery performance. Here, a critical and systematic review of DPs in Li-CO2 batteries is reported for the first time. Fundamentals of reactions for formation and decomposition of DPs are appraised; impacts on battery performance including overpotential, capacity, and stability are demonstrated; and the necessity of discharge product management is highlighted. Practical in situ/operando technologies are assessed to characterize reaction intermediates and the corresponding DPs for mechanism investigation. Additionally, achievable control measures to boost the decomposition of DPs are evidenced to provide battery design principles and improve the battery performance. Findings from this work will deepen the understanding of electrochemistry of Li-CO2 batteries and promote practical applications.

Hydrophobic surface efficiently boosting Cu2O nanowires photoelectrochemical CO2 reduction activity

The limited mass transfer of CO₂ and the competitive hydrogen evolution reaction (HER) during photoelectrochemical (PEC) CO₂ reduction usually result in low CO₂ reduction activity. Here, we constructed a Cu₂O/Sn/PTFE photocathode with a hydrophobic surface based on Cu₂O by physical vapor deposition and a dipping method. The CO faradaic efficiency (FE) increased from 34.5% (Cu₂O) to 95.1% (Cu₂O/Sn/PTFE) at -0.7 V vs. RHE, and the FE_H2 decreased from 27.9% (Cu₂O) to 3.8% (Cu₂O/Sn/PTFE). The introduction of the hydrophobic layer enhances the local CO₂ concentration on the electrode surface and effectively isolates H⁺ from the aqueous electrolyte, thereby enhancing the CO₂ reduction activity.

CO2 electrolysis towards large scale operation: rational catalyst and electrolyte design for efficient flow-cell

The electrochemical CO₂ reduction reaction (CO₂RR) to renewable fuels/chemicals is a potential approach towards addressing the carbon neutral economy. To date, a comprehensive analysis of key performance indicators, such as an intrinsic property of catalyst, reaction environment and technological advancement in the flow cell, is limited. In this study, we discuss how the design of catalyst material, electrolyte and engineering gas diffusion electrode (GDE) could affect the CO₂RR in a gas-fed flow cell. Significant emphasis is given to scale-up requirements, such as promising catalysts with a partial current density of ≥100 mA cm^-2 and high faradaic efficiency. Additional experimental hurdles and their potential solutions, as well as the best available protocols for data acquisition for catalyst activity evaluation, are listed. We believe this manuscript provides some insights into the making of catalysts and electrolytes in a rational manner along with the engineering of GDEs towards CO₂RR.

Converting CO2 into Value-Added Products by Cu2 O-Based Catalysts: From Photocatalysis, Electrocatalysis to Photoelectrocatalysis

Converting CO₂ into value-added products by photocatalysis, electrocatalysis, and photoelectrocatalysis is a promising method to alleviate the global environmental problems and energy crisis. Among the semiconductor materials applied in CO₂ catalytic reduction, Cu₂ O has the advantages of abundant reserves, low price and environmental friendliness. Moreover, Cu₂ O has unique adsorption and activation properties for CO₂ , which is conducive to the generation of C₂₊ products through CC coupling. This review introduces the basic principles of CO₂ reduction and summarizes the pathways for the generation of C₁ , C₂ , and C₂₊ products. The factors affecting CO₂ reduction performance are further discussed from the perspective of the reaction environment, medium, and novel reactor design. Then, the properties of Cu₂ O-based catalysts in CO₂ reduction are summarized and several optimization strategies to enhance their stability and redox capacity are discussed. Subsequently, the application of Cu₂ O-based catalysts in photocatalytic, electrocatalytic, and photoelectrocatalytic CO₂ reduction is described. Finally, the opportunities, challenges and several research directions of Cu₂ O-based catalysts in the field of CO₂ catalytic reduction are presented, which is guidance for its wide application in the energy and environmental fields is provided.

Retrospective insights into recent MXene-based catalysts for CO2 electro/photoreduction: how far have we gone?

The electro/photocatalytic CO₂ reduction reaction (CO₂RR) is a long-term avenue toward synthesizing renewable fuels and value-added chemicals, as well as addressing the global energy crisis and environmental challenges. As a result, current research studies have focused on investigating new materials and implementing numerous fabrication approaches to increase the catalytic performances of electro/photocatalysts toward the CO₂RR. MXenes, also known as 2D transition metal carbides, nitrides, and carbonitrides, are intriguing materials with outstanding traits. Since their discovery in 2011, there has been a flurry of interest in MXenes in electrocatalysis and photocatalysis, owing to their several benefits, including high mechanical strength, tunable structure, surface functionality, high specific surface area, and remarkable electrical conductivity. Herein, this review serves as a milestone for the most recent development of MXene-based catalysts for the electrocatalytic and photocatalytic CO₂RR. The overall structure of MXenes is described, followed by a summary of several synthesis pathways classified as top-down and bottom-up approaches, including HF-etching, in situ HF-formation, electrochemical etching, and halogen etching. Additionally, the state-of-the-art development in the field of both the electrocatalytic and photocatalytic CO₂RR is systematically reviewed. Surface termination modulation and heterostructure engineering of MXene-based electro/photocatalysts, and insights into the reaction mechanism for the comprehension of the structure-performance relationship from the CO₂RR via density functional theory (DFT) have been underlined toward activity enhancement. Finally, imperative issues together with future perspectives associated with MXene-based electro/photocatalysts are proposed.

Electrocatalyst Microenvironment Engineering for Enhanced Product Selectivity in Carbon Dioxide and Nitrogen Reduction Reactions

Carbon and nitrogen fixation strategies are regarded as alternative routes to produce valuable chemicals used as energy carriers and fertilizers that are traditionally obtained from unsustainable and energy-intensive coal gasification (CO and CH₄), Fischer-Tropsch (C₂H₄), and Haber-Bosch (NH₃) processes. Recently, the electrocatalytic CO₂ reduction reaction (CO₂RR) and N₂ reduction reaction (NRR) have received tremendous attention, with the merits of being both efficient strategies to store renewable electricity while providing alternative preparation routes to fossil-fuel-driven reactions. To date, the development of the CO₂RR and NRR processes is primarily hindered by the competitive hydrogen evolution reaction (HER); however, the corresponding strategies for inhibiting this undesired side reaction are still quite limited. Considering such complex reactions involve three gas-liquid-solid phases and successive proton-coupled electron transfers, it appears meaningful to review the current strategies for improving product selectivity in light of their respective reaction mechanisms, kinetics, and thermodynamics. By examining the developments and understanding in catalyst design, electrolyte engineering, and three-phase interface modulation, we discuss three key strategies for improving product selectivity for the CO₂RR and NRR: (i) targeting molecularly defined active sites, (ii) increasing the local reactant concentration at the active sites, and (iii) stabilizing and confining product intermediates.

Recent Progress in Electrocatalytic Reduction of CO2

A stable life support system in the spacecraft can greatly promote long-duration, far-distance, and multicrew manned space flight. Therefore, controlling the concentration of CO2 in the spacecraft is the main task in the regeneration system. The electrocatalytic CO2 reduction can effectively treat the CO2 generated by human metabolism. This technology has potential application value and good development prospect in the utilization of CO2 in the space station. In this paper, recent research progress for the electrocatalytic reduction of CO2 was reviewed. Although numerous promising accomplishments have been achieved in this field, substantial advances in electrocatalyst, electrolyte, and reactor design are yet needed for CO2 utilization via an electrochemical conversion route. Here, we summarize the related works in the fields to address the challenge technology that can help to promote the electrocatalytic CO2 reduction. Finally, we present the prospective opinions in the areas of the electrocatalytic CO2 reduction, especially for the space station and spacecraft life support system.

Defect engineering of two-dimensional materials for advanced energy conversion and storage

In the global trend towards carbon neutrality, sustainable energy conversion and storage technologies are of vital significance to tackle the energy crisis and climate change. However, traditional electrode materials gradually reach their property limits. Two-dimensional (2D) materials featuring large aspect ratios and tunable surface properties exhibit tremendous potential for improving the performance of energy conversion and storage devices. To rationally control the physical and chemical properties for specific applications, defect engineering of 2D materials has been investigated extensively, and is becoming a versatile strategy to promote the electrode reaction kinetics. Simultaneously, exploring the in-depth mechanisms underlying defect action in electrode reactions is crucial to provide profound insight into structure tailoring and property optimization. In this review, we highlight the cutting-edge advances in defect engineering in 2D materials as well as their considerable effects in energy-related applications. Moreover, the confronting challenges and promising directions are discussed for the development of advanced energy conversion and storage systems.

What do we talk about, when we talk about single-crystal termination-dependent selectivity of Cu electrocatalysts for CO2 reduction? A data-driven retrospective

We mine from the literature experimental data on the CO₂ electrochemical reduction selectivity of Cu single crystal surfaces. We then probe the accuracy of a machine learning model trained to predict faradaic efficiencies for 11 CO₂ reduction reaction products, as a function of the applied voltage at which the reaction takes place, and the relative amounts of non equivalent surface sites, distinguished according to their nominal coordination. A satisfactory model accuracy is found only when discriminating data according to their provenance. On one hand, this result points at a qualitative agreement across reported experimental CO₂ reduction reactions trends for single-crystal surfaces with well-defined terminations. On the other, this finding hints at the presence of differences in nominally identical catalysts and/or CO₂ reduction reaction measurements, which result in quantitative disagreement between experiments.

Proton Transfer Dynamics-Mediated CO2 Electroreduction

Electrochemical CO₂ reduction reaction (CO₂ RR) is crucial to addressing environmental crises and producing chemicals. Proton activation and transfer are essential in CO₂ RR. To date, few research reviews have focused on this process and its effect on catalytic performance. Recent studies have demonstrated ways to improve CO₂ RR by regulating proton transfer dynamics. This Concept highlights the use of regulating proton transfer dynamics to enhance CO₂ RR for the target product and discusses modulation strategies for proton transfer dynamics and operative mechanisms in typical systems, including single-atom catalysts, molecular catalysts, metal heterointerfaces, and organic-ligand modified metal catalysts. Characterization methods for proton transfer dynamics during CO₂ RR are also discussed, providing powerful tools for the hydrogen-involving electrochemical study. This Concept offers new insights into the CO₂ RR mechanism and guides the design of efficient CO₂ RR systems.

Interfacial pH measurements during CO2 reduction on gold using a rotating ring-disk electrode

Insights into how to control the activity and selectivity of the electrochemical CO₂ reduction reaction are still limited because of insufficient knowledge of the reaction mechanism and kinetics, which is partially due to the lack of information on the interfacial pH, an important parameter for proton-coupled reactions like CO₂ reduction. Here, we used a reliable and sensitive pH sensor combined with the rotating ring-disk electrode technique, in which a functionalized Au ring electrode works as a real-time detector of the OH^- generated during the CO₂ reduction reaction at a gold disk electrode. Variations of the interfacial pH due to both electrochemical and homogeneous reactions are mapped and the correlation of the interfacial pH with these reactions is inferred. The interfacial pH near the disk electrode increases from 7 to 12 with increasing current density, with a sharp increase at around -0.5 V vs. RHE, which indicates a change of the dominant buffering species. Through scan rate-dependent voltammetry and chronopotentiometry experiments, the homogenous reactions are shown to reach equilibrium within the time scale of the pH measurements, so that the interfacial concentrations of different carbonaceous species can be calculated using equilibrium constants. Furthermore, pH measurements were also performed under different conditions to disentangle the relationship between the interfacial pH and other electrolyte effects. The buffer effect of alkali metal cations is confirmed, showing that weakly hydrated cations lead to less pronounced pH gradients. Finally, we probe to which extent increasing mass transport and the electrolyte buffer capacity can aid in suppressing the increase of the interfacial pH, showing that the buffer capacity is the dominant factor in suppressing interfacial pH variations.

A crystal growth kinetics guided Cu aerogel for highly efficient CO2 electrolysis to C2+ alcohols

To realize commercial CO₂ electrochemical reduction to C₂₊ alcohols, the selectivity and production rate should be further improved. Establishing controllable surface sites with a favorable local environment is an interesting route to guide the C₂₊ pathway. Herein, we report a room-temperature one-step synthetic strategy to fabricate a highly stable Cu aerogel as an efficient CO₂ reduction electrocatalyst. Controlling crystal growth kinetics using different reductants is an efficient strategy to modulate the nucleation and growth rate of Cu aerogels, enabling the creation of efficient surface sites for the C₂₊ pathway. Over the Cu aerogel obtained by reducing Cu²⁺ using a weak reductant (NH₃·BH₃), the faradaic efficiency of C₂₊ products could reach 85.8% with the current density of 800 mA cm^-2 at the potential of -0.91 V vs. reversible hydrogen electrode, and the C₂₊ alcohol selectivity was 49.7% with a partial current density of 397.6 mA cm^-2, while the Cu aerogel prepared using a strong reductant (NaBH₄) was favorable to generating CO. Experimental and theoretical studies showed that the selectivity of the reaction depended strongly on the desorption and dimerization of *CO intermediates on the catalysts. The strong reductant induced a defective Cu surface that could facilitate the desorption of the *CO intermediate, subsequently producing CO, whereas the low defect Cu produced using a weak reductant could significantly enhance the selectivity for the C₂₊ product by improving *CO adsorption and the C-C coupling on the catalyst. This work opens a new way for constructing efficient electrocatalysts for CO₂ electroreduction to C₂₊ alcohols.

Nanostructure Engineering of Sn-Based Catalysts for Efficient Electrochemical CO2 Reduction

Excessive anthropogenic CO₂ emission has caused a series of ecological and environmental issues, which threatens mankind's sustainable development. Mimicking the natural photosynthesis process (i.e., artificial photosynthesis) by electrochemically converting CO₂ into value-added products is a promising way to alleviate CO₂ emission and relieve the dependence on fossil fuels. Recently, Sn-based catalysts have attracted increasing research attentions due to the merits of low price, abundance, non-toxicity, and environmental benignancy. In this review, the paradigm of nanostructure engineering for efficient electrochemical CO₂ reduction (ECO₂ R) on Sn-based catalysts is systematically summarized. First, the nanostructure engineering of size, composition, atomic structure, morphology, defect, surficial modification, catalyst/substrate interface, and single-atom structure, are systematically discussed. The influence of nanostructure engineering on the electronic structure and adsorption property of intermediates, as well as the performance of Sn-based catalysts for ECO₂ R are highlighted. Second, the potential chemical state changes and the role of surface hydroxides on Sn-based catalysts during ECO₂ R are introduced. Third, the challenges and opportunities of Sn-based catalysts for ECO₂ R are proposed. It is expected that this review inspires the further development of highly efficient Sn-based catalysts, meanwhile offer protocols for the investigation of Sn-based catalysts.