Synthesis and soft crystal structure-induced broad emission of (NH3C6H12NH3)InBr5·2H2O

We report a simple synthesis of a new lead-free zero-dimensional (0D) hybrid halide compound, (5P1)InBr5·2H2O [(5P1) = NH3C6H12NH3], which hosts isolated and distorted octahedra of [InBr5(H2O)]2-, surrounded by bulky asymmetric organic cations [(5P1)2+] and H2O molecules. The hybrid crystals exhibit broad self trapped excitonic (STE) emission due to strong anharmonic soft structure.

Dimethylamine Copper(I) Halide Single Crystals: Structure, Physical Properties, and Scintillation Performance

Hybrid copper(I) halides have garnered a significant amount of attention as potential substitutes in luminescence and scintillation applications. Herein, we report the discovery and crystal growth of new zero-dimensional compounds, (C2H8N)3Cu2I5 and (C2H8N)4Cu2Br6. The bromide and iodide have a triclinic structure with space group P1̅ and an orthorhombic structure with space group Pnma, respectively. (C2H8N)3Cu2I5 exhibits cyan emission peaking at 504 nm with a photoluminescence quantum yield (PLQY) of 34.79%, while (C2H8N)4Cu2Br6 shows yellowish-green emission peaking at 537 nm with a PLQY of 38.45%. The temperature-dependent photoluminescence data of both compounds were fitted to theoretical models, revealing that nonradiative intermediate states significantly affect thermal quenching and antiquenching. Electron-phonon interactions, the origin of emission line width broadening and peak shifting, were also investigated via fittings. The scintillation properties of (C2H8N)3Cu2I5 were evaluated, and an X-ray imaging device was successfully fabricated using (C2H8N)3Cu2I5. This work demonstrates the potentiality of copper halides in lighting and X-ray imaging applications.

A Luminescent Hybrid Bimetallic Halide Family with Solvent-Coordinated Rare Earth and Alkaline Earth Metals

Hybrid metal halides are an extraordinary class of optoelectronic materials with extensive applications. To further diversify and study the in-depth structure-property relations, we report here a new family of 21 zero-dimensional hybrid bimetallic chlorides with the general formula A(L)n[BClm] (A=rare earth (RE), alkaline earth metals and Mn; L=solvent ligand; and B=Sb, Bi and Te). The RE(DMSO)8[BCl6] (RE=La, Ce, Sm, Eu, Tb, and Dy; DMSO=dimethyl sulfoxide) series shows broadband emission attributed to triplet radiative recombination from Sb and Bi, incorporating the characteristic emission of RE metals, where Eu(DMSO)8[BiCl6] shows a staggering PL quantum yield of 94 %. The pseudo-octahedral [SbCl5] with Cl vacancy in AII(DMSO)6[SbCl5] (AII=Mg, Ca and Mn) and the square pyramidal [SbCl5] in AII(TMSO)6[SbCl5] (TMSO=tetramethylene sulfoxide) enhance the stereoactive expression of the 5 s2 lone pairs of Sb3+, giving rise to the observation of dual-band emission of singlet and triplet emission, respectively. A series of Te(IV) analogues have been characterized, showing blue-light-excitable single-band emission. This work expands the materials space for hybrid bimetallic halides with an emphasis on harnessing the RE elements, and provides important insights into designing new emitters and regulating their properties.

Photoluminescence Enhancement of 0D Organic-Inorganic Metal Halides via Aggregation-Induced Emission and Halide Substitution

0D organic-inorganic metal halides (OIMHs) provide unprecedented versatility in structures and photoluminescence properties. Here, a series of bluish-white emissive 0D OIMHs, (TPE-TPP)2Sb2BrxCl8-x (x = 1.16 to 8), are prepared by assembling the 1-triphenylphosphonium-4-(1,2,2-triphenylethenyl)benzene cation (TPE-TPP)+ with antimony halides anions. Based on experimental characterizations and theoretical calculations, the emission of the 0D OIMHs are attributed to the fluorescence of the organic cations with aggregation-induced emission (AIE) properties. The 0D structure minimized the molecular motion and intermolecular interactions between (TPE-TPP)+ cations, effectively suppressing the non-radiative recombination processes. Consequently, the photoluminescence quantum efficiency (PLQE) of (TPE-TPP)2Sb2Br1.16Cl6.84 is significantly enhanced to 55.4% as compared to the organic salt (TPE-TPP)Br (20.5%). The PLQE of (TPE-TPP)2Sb2BrxCl8-x can also be readily manipulated by halide substitution, due to the competitive processes between non-radiative recombination on the inorganic moiety and the energy transfer from inorganic to organic. In addition, electrically driven light-emitting diodes (LEDs) are fabricated based on (TPE-TPP)2Sb2Br1.16Cl6.84 emitter, which exhibited bluish-white emission with a maximum external quantum efficiency (EQE) of 1.1% and luminance of 335 cd m-2. This is the first report of electrically driven LED based on 0D OIMH with bluish-white emission.

Recent Advances in Fast-Decaying Metal Halide Perovskites Scintillators

Fast-decaying scintillators show subnanoseconds or nanoseconds lifetime and high time resolution, making them important in nuclear physics, medical diagnostics, scientific research, and other fields. Metal halide perovskites (MHPs) show great potential for scintillator applications owing to their easy synthesis procedure and attractive optical properties. However, MHPs scintillators still need further improvement in decay lifetime. To optimize the decay lifetime, great progress has been achieved recently. In this Perspective, we first summarize the structural characteristics of MHPs in various dimensions, which brings different exciton behaviors. Then, recent advances in designing fast-decaying MHPs according to different exciton behaviors have been concluded, focusing on the photophysical mechanisms to achieve fast-decaying lifetimes. These advancements in decay lifetimes could facilitate the MHPs scintillators in advanced applications, such as time-of-flight positron emission tomography (TOF-PET), photon-counting computed tomography (PCCT), etc. Finally, the challenges and future opportunities are discussed to provide a roadmap for designing novel fast-decaying MHPs scintillators.

High-efficiency color-tunable ultralong room-temperature phosphorescence from organic-inorganic metal halides via synergistic inter/intramolecular interactions

Materials exhibiting highly efficient, ultralong and multicolor-tunable room-temperature phosphorescence (RTP) are of practical importance for emerging applications. However, these are still very scarce and remain a formidable challenge. Herein, using precise structure design, several novel organic-inorganic metal-halide hybrids with efficient and ultralong RTP have been developed based on an identical organic cation (A). The original organic salt (ACl) exhibits red RTP properties with low phosphorescence efficiency. However, after embedding metals into the organic salt, the changed crystal structure endows the resultant metal-halide hybrids with excellent RTP properties. In particular, A2ZnCl4·H2O exhibits the highest RTP efficiency of up to 56.56% with a long lifetime of up to 159 ms. It is found that multiple inter/intramolecular interactions and the strong heavy-atom effect of the rigid metal-halide hybrids can suppress molecular motion and promote the ISC process, resulting in highly stable and localized triplet excitons followed by highly efficient RTP. More crucially, multicolor-tunable fluorescence and RTP achieved by tuning the metal and halogen endow these materials with wide application prospects in the fields of multilevel information encryption and dynamic optical data storage. The findings promote the development of phosphorescent metal-halide hybrids for potential high-tech applications.

Efficient Large-Area (81 cm2) Ternary Copper Halides Light-Emitting Diodes with External Quantum Efficiency Exceeding 13% via Host-Guest Strategy

Ternary copper (Cu) halides are promising candidates for replacing toxic lead halides in the field of perovskite light-emitting diodes (LEDs) toward practical applications. However, the electroluminescent performance of Cu halide-based LEDs remains a great challenge due to the presence of serious nonradiative recombination and inefficient charge transport in Cu halide emitters. Here, the rational design of host-guest [dppb]2Cu2I2 (dppb denotes 1,2-bis[diphenylphosphino]benzene) emitters and its utility in fabricating efficient Cu halide-based green LEDs that show a high external quantum efficiency (EQE) of 13.39% are reported. The host-guest [dppb]2Cu2I2 emitters with mCP (1,3-bis(N-carbazolyl)benzene) host demonstrate a significant improvement of carrier radiative recombination efficiency, with the photoluminescence quantum yield increased by nearly ten times, which is rooted in the efficient energy transfer and type-I energy level alignment between [dppb]2Cu2I2 and mCP. Moreover, the charge-transporting mCP host can raise the carrier mobility of [dppb]2Cu2I2 films, thereby enhancing the charge transport and recombination. More importantly, this strategy enables a large-area prototype LED with a record-breaking area up to 81 cm2, along with a decent EQE of 10.02% and uniform luminance. It is believed these results represent an encouraging stepping stone to bring Cu halide-based LEDs from the laboratory toward commercial lighting and display panels.

Efficient Ultraviolet Circularly Polarized Luminescence in Zero-Dimensional Hybrid Cerium Bromides

Ultraviolet circularly polarized luminescence (UV-CPL) with high photon energy shows great potential in polarized light sources and stereoselective photopolymerization. However, developing luminescent materials with high UV-CPL performance remains challenging. Here, we report a pair of rare earth Ce3+-based zero-dimensional (0D) chiral hybrid metal halides (HMHs), R/S-(C14H24N2)2CeBr7, which exhibits characteristic UV emissions derived from the Ce 5d-4f transition. The compounds show simultaneously high photoluminescent quantum yields of (32-39)% and large luminescent dissymmetry factor (|glum|) values of (1.3-1.5)×10-2. Thus, the figures of merits of R/S-(C14H24N2)2CeBr7 are calculated to be (4.5-5.8)×10-3, which are superior to the reported UV-CPL emissive materials. Additionally, nearly 91 % of their PL intensities at 300 K can be well preserved at 380 K (LED operating temperature) without phase transition or decomposition, demonstrating the excellent structural and optical thermal stabilities of R/S-(C14H24N2)2CeBr7. Based on these enantiomers, the fabricated UV-emitting CP-LEDs exhibit high polarization degrees of ±1.0 %. Notably, the UV-CPL generated from the devices can significantly trigger the enantioselective photopolymerization of diacetylene with remarkable stereoselectivity, and consequently yield polymerized products with the anisotropy factors of circular dichroism (gCD) up to ±3.9×10-2, outperforming other UV-CPL materials and demonstrating their great potential as UV-polarized light sources.

Multifunctional Phosphor with High-Efficient Near-Infrared Emission Based on Antimony-Zinc Halides

Metal halide-based broadband near-infrared (NIR) luminescent materials face problems such as complicated preparation, high cost, low photoluminescence quantum yield, and high excitation energy. Here, incorporating Sb3+ and Br- into (C20H20P)2ZnCl4 crystals allowed for the achievement of efficient broadband near-infrared emission under 400 nm excitation while maintaining satisfactory environmental and thermal stability. The compounds exhibit a broad range of emission bands from 550 to 1050 nm, with a photoluminescence quantum yield of 93.57%. This is a groundbreaking achievement for organic-inorganic hybrid metal halide NIR luminescent materials. The near-infrared emission is suggested to originate from [SbX5]2-, as supported by the femtosecond transient absorption spectra and density-functional theory calculations. This phosphor-based NIR LEDs successfully demonstrate potential applications in night vision, medical imaging, information encryption, and anticounterfeiting.

Achieving Near-Unity Red Light Photoluminescence in Antimony Halide Crystals via Polyhedron Regulation

Exploration of efficient red emitting antimony hybrid halide with large Stokes shift and zero self-absorption is highly desirable due to its enormous potential for applications in solid light emitting, and active optical waveguides. However, it is still challenging and rarely reported. Herein, a series of (TMS)2SbCl5 (TMS=triphenylsulfonium cation) crystals have been prepared with diverse [SbCl5]2- configurations and distinctive emission color. Among them, cubic-phase (TMS)2SbCl5 shows bright red emission with a large Stokes shift of 312 nm. In contrast, monoclinic and orthorhombic (TMS)2SbCl5 crystals deliver efficient yellow and orange emission, respectively. Comprehensive structural investigations reveal that larger Stokes shift and longer-wavelength emission of cubic (TMS)2SbCl5 can be attributed to the larger lattice volume and longer Sb⋅⋅⋅Sb distance, which favor sufficient structural aberration freedom at excited states. Together with robust stability, (TMS)2SbCl5 crystal family has been applied as optical waveguide with ultralow loss coefficient of 3.67 ⋅ 10-4 dB μm-1, and shows superior performance in white-light emission and anti-counterfeiting. In short, our study provides a novel and fundamental perspective to structure-property-application relationship of antimony hybrid halides, which will contribute to future rational design of high-performance emissive metal halides.

Embedding Te4+ into Sn4+-Based Metal Halide To Passivate Structure Defects for High-Performance Light-Emitting Application

Low-dimensional lead-halide hybrids are an emerging class of optical functional material but suffer the problems of toxicity and poor air stability. Among lead-free metal halides, tin(IV)-based metal halides are promising optoelectronic materials due to their robust structure and environmental friendliness. However, their photoluminescence (PL) properties are poor, and the underlying mechanisms are still elusive. Herein, a stable Sn4+-based halide hybrid, (C4H7N2)2SnCl6, was developed, which however exhibits poor PL properties at room temperature (RT) due to the lattice defects and the robust crystal structure. To enhance its PL efficiency, the Te4+ ion with a stereoactive 5s2 lone pair has been introduced into the lattice. As a result, Te4+-doped (C4H7N2)2SnCl6 displays broadband orange emission (∼640 nm) with a PL efficiency of ∼46% at RT. Interestingly, Te4+-doped (C4H7N2)2SnCl6 shows triple emission bands at 80 K, which could be due to the synergistic effect of the organic cations and the self-trapped state induced by Te4+. Additionally, high-performance white light-emitting diodes were prepared using Te4+-doped (C4H7N2)2SnCl6, revealing the potential of this material for lighting applications. This study provides new insight into the PL mechanism of Sn4+-based metal-halide hybrids and thus facilitates the design and development of eco-friendly light-emitting metal halides.

Rigid Phase Formation and Sb3+ Doping of Tin (IV) Halide Hybrids toward Photoluminescence Enhancement and Tuning for Anti-Counterfeiting and Information Encryption

Multi-excitonic emitting materials in luminescent metal halides are emerging candidates for anti-counterfeiting and information encryption applications. Herein, ATPP2SnCl6 (ATPP=acetonyltriphenylphosphonium) phase was designed and synthesized by rationally choosing emissive organic reagent of ATPPCl and non-toxic stable metal ions of Sn4+, and Sb3+ was further doped into ATPP2SnCl6 to tune the photoluminescence with external self-trapped excitons emission. The derived non-toxic ATPP2SnCl6 shows multi-excitonic luminescent centers verified by optical study and differential charge-density from density functional theory calculations. Incorporation of Sb3+ dopants and the increasing concentrations induce the efficient energy transfer therein, thus enhancing photoluminescence quantum yield from 5.1 % to 73.8 %. The multi-excitonic emission inspires the creation of information encryption and decryption by leveraging the photoluminescence from ATPPCl to ATPP2SnCl6 host and ATPP2SnCl6 : Sb3+. This study facilitates the anti-counterfeiting application by employing solution-processable luminescent metal halides materials with excitation-dependent PL properties.

Solid-State Photochemical Cascade Process Boosting Smart Ultralong Room-Temperature Phosphorescence in Bismuth Halides

Molecular ultralong room-temperature phosphorescence (RTP), exhibiting multiple stimuli-responsive characteristics, has garnered considerable attention due to its potential applications in light-emitting devices, sensors, and information safety. This work proposes the utilization of photochemical cascade processes (PCCPs) in molecular crystals to design a stepwise smart RTP switch. By harnessing the sequential dynamics of photo-burst movement (induced by [2+2] photocycloaddition) and photochromism (induced by photogenerated radicals) in a bismuth (Bi)-based metal-organic halide (MOH), a continuous and photo-responsive ultralong RTP can be achieved. Furthermore, utilizing the same Bi-based MOH, diverse application demonstrations, such as multi-mode anti-counterfeiting and information encryption, can be easily implemented. This work thus not only serves as a proof-of-concept for the development of solid-state PCCPs that integrate photosalient effect and photochromism with light-chemical-mechanical energy conversion, but also lays the groundwork for designing new Bi-based MOHs with dynamically responsive ultralong RTP.

Achieving Strong Circularly Polarized Luminescence through Cascade Cationic Insertion in Lead-free Hybrid Metal Halides

Generating circularly polarized luminescence (CPL) with simultaneous high photoluminescence quantum yield (PLQY) and dissymmetry factor (glum) is difficult due to usually unmatched electric transition dipole moment (μ) and magnetic transition dipole moment (m) of materials. Herein we tackle this issue by playing a "cascade cationic insertion" trick to achieve strong CPL (with PLQY of ~100 %) in lead-free metal halides with high glum values reaching -2.3×10-2 without using any chiral inducers. Achiral solvents of hydrochloric acid (HCl) and N, N-dimethylformamide (DMF) infiltrate the crystal lattice via asymmetric hydrogen bonding, distorting the perovskite structure to induce the "intrinsic" chirality. Surprisingly, additional insertion of Cs+ cation to substitute partial (CH3)2NH2 + transforms the chiral space group to achiral but the crystal maintains chiroptical activity. Further doping of Sb3+ stimulates strong photoluminescence as a result of self-trapped excitons (STEs) formation without disturbing the crystal framework. The chiral perovskites of indium-antimony chlorides embedded on LEDs chips demonstrate promising potential as CPL emitters. Our work presents rare cases of chiroptical activity of highly luminescent perovskites from only achiral building blocks via spontaneous resolution as a result of symmetry breaking.

Yellow-Orange Emission in Sb3+-Doped Hexakis(thiocarbamidium) Hexabromoindium(III) Tribromide

A luminescent zero-dimensional organic-inorganic hybrid indium halide (TUH)6[In1-xSbxBr6]Br3 (TU = thiourea, 0 ≤ x ≤ 0.0998) was synthesized via the solvothermal method. In structures, resolved by single-crystal X-ray diffraction, isolated distorted [InBr6]3- and [SbBr6]3- octahedra are linked to organic TUH+ cations by intermolecular N-H···Br and N-H···S hydrogen bonds. The crystals were characterized by elemental analysis, TG-DSC, powder X-ray diffraction, FTIR analysis, and steady-state absorption and photoluminescence spectroscopy. (TUH)6[In1-xSbxBr6]Br3 exhibits a broadband yellow-orange emission centered at 595-602 nm with a half-width of 141-149 nm (0.48-0.52 eV) and a large Stokes shift of 232-238 nm (1.33-1.35 eV). This emission can be attributed to the self-trapped exciton emission of triplet states of the octahedral anion [SbBr6]3- or [InBr6]3-. Two possible emission mechanisms were discussed. Doping with Sb3+ leads to a significant increase in photoluminescence quantum yield from 25.7 at x = 0 to 48.4% at x = 0.0065, when excited at 365 nm, indicating the potential use of (TUH)6[In1-xSbxBr6]Br3 compounds in the field of photonics.

Manipulating Chiroptical Activities in 0D Chiral Hybrid Manganese Bromides by Solvent Molecular Engineering

0D hybrid metal halides (0D HMHs) with fully isolated inorganic units provide an ideal platform for studying the correlations between chiroptical activities and crystal structures at atomic levels. Here, through the incorporation of different solvent molecules, a series of 0D chiral manganese bromides (RR/SS-C20H28N2)3MnBr8·2X (X = C2H5OH, CH3OH, or H2O) are synthesized to elucidate their chiroptical properties. They show negligible circular dichroism signals of Mn absorptions due to C2v-symmetric [MnBr4]2- tetrahedra. However, they display distinct circularly polarized luminescence (CPL) signals with continuously increased luminescence asymmetry factors (glum) from 10-4 (X = C2H5OH) to 10-3 (X = H2O). The increased glum value is structurally revealed to originate from the enhancement of [MnBr4]2- tetrahedral bond-angle distortions, due to the presence of different solvent molecules. Furthermore, (RR/SS-C20H28N2)MnBr4·H2O enantiomers with larger bond-angle distortions of [MnBr4]2- tetrahedra are synthesized based on hydrobromic acid-induced structural transformation of (RR/SS-C20H28N2)3MnBr8·2H2O enantiomers. Therefore, such (RR/SS-C20H28N2)MnBr4·H2O enantiomers exhibit enhanced CPL signals with |glum| up to 1.23 × 10-2. This work provides unique insight into enhancing chiroptical activities in 0D HMH systems.

The luminescent properties of metal halides are determined by the inorganic framework and solvent molecules

The luminescent properties of metal halides are usually considered to be determined by the inorganic framework. In this work, we propose that the luminescent properties of metal halides are determined by both the inorganic framework and the solvent [Denoted as (inorganic framework + n·solvent molecules), n = 0, 1, 2…] through the abundant solvatochromic or thermochromic effect of tetrabutylammonium lead bromides [TPB, T = TBA (tetrabutylammonium), P = Pb (lead), B = Br (bromide)] containing water (H2O) and ethanol (EtOH). One-dimensional (1D) TPB can form ligands of [[Pb5Br18]8- + 2H2O(H)], [[Pb5Br18]8- + 2H2O(H) + 2H2O] and [[Pb5Br18]8- + 2EtOH] by solvent or heat treatment has completely different luminescent properties resulting from different solvents. They exhibit broad spectral emission due to strong electron-phonon coupling, as do other 1D metal halides. However, the 1D TPB containing only [[Pb5Br18]8- achieves extremely rare narrow-band green emission, with full width at half maximum (FWHM) of 21 nm at room temperature and 8 nm at low temperature, color gamut covers 95 % of the International Telecommunication Union recommendation 2020 standard. This work provides new guidance for the modulation of photophysical properties of metal halides, as well as new materials for the display and smart materials fields.

Lead-free Perovskite with Distorted [InX6]3- Octahedron Induced by Organic Cation and Enhanced PLQY by Sb Doping

In-based halide perovskites have attracted a lot of attention because of their unique broadband emission properties. Herein, a series of In-based hybrid perovskites of (H2MP)2InCl7·H2O (1), (H2EP)2InCl7·H2O (2), (H2MP)2InBr7·H2O (3), and (H2EP)2InBr7·H2O (4) were synthesized under the control of halogen ions and organic cations. 1, 2, and 4 exhibit obvious photoluminescence properties with peaks at 392, 442, and 652 nm, respectively. The effects of the different components on the crystal structure and photoluminescence properties are discussed by calculating the structural distortion of the [InX6]3- octahedron. The photoluminescence properties of 1 and 4 were significantly improved after Sb3+ doping with PLQY values of 57.12 and 41.53%. Finally, a white LED was successfully fabricated with the two doped compounds coated onto the 365 nm blue LED chip.

HgBr2: an easily growing wide-spectrum birefringent crystal

Birefringent materials are of great significance to the development of modern optical technology; however, research on halide birefringent crystals with a wide transparent range remains limited. In this work, mercuric bromide (HgBr2) has been investigated for the first time as a promising birefringent material with a wide transparent window spanning from ultraviolet (UV) to far-infrared (far-IR) spectral regions (0.34-22.9 μm). HgBr2 has an exceptionally large birefringence (Δn, 0.235 @ 546 nm), which is 19.6 times that of commercial MgF2. The ordered linear motif [Br-Hg-Br] with high polarizability anisotropy within the molecule is the inherent source of excellent birefringence, making it an efficient building block for birefringent materials. In addition, HgBr2 can be easily grown under mild conditions and remain stable in air for prolonged periods. Studying the birefringent properties of HgBr2 crystals would provide new ideas for future exploration of wide-spectrum birefringent materials.

Capillary Manganese Halide Needle-Like Array Scintillator with Isolated Light Crosstalk for Micro-X-Ray Imaging

The exacerbation of inherent light scattering with increasing scintillator thickness poses a major challenge for balancing the thickness-dependent spatial resolution and scintillation brightness in X-ray imaging scintillators. Herein, a thick pixelated needle-like array scintillator capable of micrometer resolution is fabricated via waveguide structure engineering. Specifically, this involves integrating a straightforward low-temperature melting process of manganese halide with an aluminum-clad capillary template. In this waveguide structure, the oriented scintillation photons propagate along the well-aligned scintillator and are confined within individual pixels by the aluminum reflective cladding, as substantiated from the comprehensive analysis including laser diffraction experiments. Consequently, thanks to isolated light-crosstalk channels and robust light output due to increased thickness, ultrahigh spatial resolutions of 60.8 and 51.7 lp mm-1 at a modulation transfer function (MTF) of 0.2 are achieved on 0.5 mm and even 1 mm thick scintillators, respectively, which both exceed the pore diameter of the capillary arrays' template (Φ = 10 µm). As far as it is known, these micrometer resolutions are among the highest reported metal halide scintillators and are never demonstrated on such thick scintillators. Here an avenue is presented to the demand for thick scintillators in high-resolution X-ray imaging across diverse scientific and practical fields.

Integrating Full-Color 2D Optical Waveguide and Heterojunction Engineering in Halide Microsheets for Multichannel Photonic Logical Gates

Ensuring information security has emerged as a paramount concern in contemporary human society. Substantial advancements in this regard can be achieved by leveraging photonic signals as the primary information carriers, utilizing photonic logical gates capable of wavelength tunability across various time and spatial domains. However, the challenge remains in the rational design of materials possessing space-time-color multiple-resolution capabilities. In this work, a facile approach is proposed for crafting metal-organic halides (MOHs) that offer space-time-color resolution. These MOHs integrate time-resolved room temperature phosphorescence and color-resolved excitation wavelength dependencies with both space-resolved ex situ optical waveguides and in situ heterojunctions. Capitalizing on these multifaceted properties, MOHs-based two-dimensional (2D) optical waveguides and heterojunctions exhibit the ability to tune full-color emissions across the spectra from blue to red, operating within different spatial and temporal scales. Therefore, this work introduces an effective methodology for engineering space-time-color resolved MOH microstructures, holding significant promise for the development of high-density photonic logical devices.

Centimeter-Sized Single Crystals of Tetrahedral Manganese (II) Halide Hybrids for Wide-Color Gamut Backlighting Displays

Phosphors with narrow-band green emissions and high photoluminescent quantum efficiency (PLQY) are significantly required for backlighting displays with wider color gamut. In this work, two centimeter-sized manganese (II) halide single crystals TMG2MnCl4 and TMG2MnBr4 (TMG = 1,1,3,3-tetramethylguanidine) are synthesized, exhibiting bright narrow-band green emissions with high PLQYs up to 62% and 90%, respectively. The narrow-band green light emission is located at 520 nm with a full-width at half-maximum (FWHM) of only 57 nm. The photoluminescence mechanisms of two single crystals are elaborated. Two white-light-emitting diodes for backlighting displays (BD-WLEDs) based on them are fabricated, exhibiting the widest color gamut of 122% National Television Standards Committee (NTSC), and a luminous efficacy reached ≈93 lm W-1 with excellent luminescence stability at high temperatures. These properties indicate the potential applications of tetrahedral manganese (II) hybrids in wide-color gamut backlighting displays.

1D Cu(I)-based chiral organic-inorganic hybrid material with second harmonic generation and circular polarized luminescence

In recent years, organic-inorganic hybrid materials have demonstrated exceptional performance in nonlinear optics, attracting widespread attention. However, there are relatively few examples of coordination compounds synthesized with Cu as the metal center that exhibit excellent nonlinear optical properties. In this study, we successfully synthesized a pair of enantiomers named R/S-Cu2I2 by reacting chiral ligands with CuI. The crystal structure reveals a one-dimensional copper-iodide chain structure built by Cu2I2 clusters, and its ordered arrangement in space provides not only a strong second harmonic generation (SHG) signal (1.24 × KDP) but also a large birefringence (0.15@1064 nm). Under excitation at 395 nm, the crystals exhibit red fluorescence peaked at 675 nm. The CD spectra of R/S-Cu2I2 show a distinct mirror-symmetric Cotton effect, and their CPL signals are corresponding and opposite in the emission range, with a maximum glum of approximately ±2.5 × 10-3. Theoretical calculations using density functional theory were also carried out to enhance our understanding of the correlation between their structures and optical properties.

Structural Phase Transition in 0D (3,5-DMP)2Bi1-xSbxCl5 Metal Halides: Expression of the Lone Pair Effect and Polyhedral Distortion

Low-dimensional Bi/Sb-based organic-inorganic metal halides (OIMHs) have attracted immense attention from the research community because of their structural diversity and efficient luminescence properties. Further understanding of the relationship between the structure and luminescence properties of these materials is of utmost importance for tuning the luminescence properties for various practical applications. Herein, we have synthesized two lead-free Bi/Sb-based novel OIMHs, (3,5-DMP)2BiCl5 and (3,5-DMP)2SbCl5 [(3,5-DMP) = 3,5-dimethylpiperidine], with zero-dimensional (0D) structures and crystallizing in triclinic (P1 ¯ space group) and monoclinic (P21/c space group) crystal systems, respectively. Both the compounds behave as typical semiconductors with indirect optical band gaps of 3.34 and 3.36 eV for pristine Bi and Sb compounds. These compounds exhibit higher environmental and thermal stability at ambient conditions. Gradual substitution of Sb at the Bi site in (3,5-DMP)2Bi1-xSbxCl5 resulted in the introduction of structural strain due to the significant expression of the lone pair effect, thus leading to a structural transition from the triclinic to monoclinic phase. The effect of the structural phase transition on the optical properties is also studied in (3,5-DMP)2Bi1-xSbxCl5. This work may offer new direction and guidance for exploring various 0D hybrid metal halides and tuning the structures for improvement in the luminescence properties.

Passivation of Organic-Inorganic Hybrid Perovskite with Poly(lactic Acid) to Achieve Stable Red-Light Flexible Films

Low-dimensional organic-inorganic hybrid perovskites (OIHPs) have shown significant potential in the optoelectronic field due to their adjustable structure and properties. However, the poor air stability and flexibility of the OIHP crystals limit their further development. Herein, three OIHP crystals have been synthesized using cadmium chloride and the isomer of phenylenediamine as raw materials. Mn2+ doping turns on the red-light emission of Cd-based OIHPs at around 625 nm. Interestingly, the organic ligands with different steric hindrance can induce a transition of the OIHP structure from two dimensions (2D) to one dimension (1D), thereby regulating the quantum yield of red luminescence in the range of 38.4% to nearly 100%. It is found that the surface-exposed amino groups are easy to oxidize, resulting in the instability of these OIHP crystals. Therefore, poly(lactic acid) (PLA) is selected to passivate OIHPs through hydrogen bonding between C═O of PLA and -NH2 on the surface of OIHPs. As a result, the production of OIHP-based flexible films with highly efficient and stable red emission can be obtained after being encapsulated by PLA. They demonstrate enormous application potential in flexible X-ray imaging. This study not only realizes stable perovskite films but also provides an effective design idea for red flexible scintillators.

HCOO- Doping-Induced Multiexciton Emissions in Cs3Cu2I5 Crystals for Efficient X-Ray Scintillation

Self-trapped exciton (STE) luminescence, typically associated with structural deformation of excited states, has attracted significant attention in metal halide materials recently. However, the mechanism of multiexciton STE emissions in certain metal halide crystals remains largely unexplored. This study investigates dual luminescence emissions in HCOO- doped Cs3Cu2I5 single crystals using transient and steady-state spectroscopy. The dual emissions are attributed to intrinsic STE luminescence originating from the host lattice and extrinsic STE luminescence induced by external dopants, respectively, each of which can be triggered independently at distinct energy levels. Theoretical calculations reveal that multiexciton emission originates from structural distortion of the host and dopant STEs within the 0D lattice in their respective excited states. By meticulously tuning the excitation wavelength and selectively exciting different STEs, the dynamic alteration of color change in Cs3Cu2I5:HCOO- crystals is demonstrated. Ultimately, owing to an extraordinarily high photoluminescence quantum yield (99.01%) and a diminished degree of self-absorption in Cs3Cu2I5:HCOO- crystals, they exhibit remarkable X-ray scintillation characteristics with light yield being improved by 5.4 times as compared to that of pristine Cs3Cu2I5 crystals, opening up exciting avenues for achieving low-dose X-ray detection and imaging.

Multisite Fine-Tuning in Hybrid Cadmium Halides Enables Wide Range Emissions for Anti-Counterfeiting

Achieving tunable emissions spanning the spectrum, from blue to near-infrared (NIR) light, within a single component is a formidable challenge with significant implication, particularly in tailoring multicolor luminescence for anti-counterfeiting purposes. In this study, we demonstrate a broad spectrum of emissions, covering blue to red and extending into NIR light in [BPy]2CdX4 : xSb3+ (BPy=Butylpyridinium; X=Cl, Br; x=0 to 0.08) through precise multisite structural fine-tuning. Notably, the multicolor emissions from [BPy]2CdBr4 : Sb3+ manifest a distinctive pattern, transitioning from blue to yellow in tandem with the host [BPy]2CdBr4 and further extending from yellow to NIR with its homologous [BPy]2CdCl4 : Sb3+, resulting in the simultaneous presence of intersecting and independent emission colors. Detailed modulation of chemical composition enables partial luminescence switching, facilitating the creation of diverse patterns with multicolor luminescence by employing [BPy]2CdX4 : xSb3+ as phosphors. This study for the first time successfully implements several groups of tunable emission colors in a single matrix via multisite fine-tuning. Such an effective strategy not only develops the specific relationships between tunable emissions and adjustable compositions, but also introduces a cost-effective and straightforward approach to achieving unique, high-level, plentiful-color and multiple-information-storage labels for advanced anti-counterfeiting applications.

Excitation-Selective and Double-Emissive Lead-Free Binary Hybrid Metal Halides for White Light-Emitting Diode and X-Ray Scintillation

Zero-dimensional (0D) organic metal halides comprising heterogeneous metal cations in single phase can achieve multiple luminous emissions enabling them toward multifunctional light-emitting applications. Herein, A novel single crystal of (C8H20N)4SbMnCl9 containing two luminescent centers of [SbCl5]2- pentahedrons and [MnCl4]2- tetrahedrons is reported. The large distance between Sb-Sb, Mn-Mn, and Sb-Mn as well as theory calculation indicate negligible interaction between individual centers, thus endowing (C8H20N)4SbMnCl9 with excitation-dependable and efficient luminescence. Under near-UV excitation, only orange emission originates from self-trapped excitons recombination in [SbCl5]2- pentahedron occurs with photoluminescence quantum yield (PLQY) of 91.5%. Under blue-light excitation, only green emission originating from 4T1-6A1 transition of Mn2+ in [MnCl4]2- tetrahedrons occurs with PLQY of 66.8%. Interestingly, upon X-ray illumination, both emissions can be fully achieved due to the high-energy photon absorption. Consequently, (C8H20N)4SbMnCl9 is employed as phosphors to fabricate white light-emitting diodes optically pumped by n-UV chip and blue-chip thanks to its excitation-dependable property. Moreover, it also shows promising performance as X-ray scintillator with low detection limit of 60.79 nGyair S-1, steady-state light yield ≈54% of commerical scintillaotr LuAG:Ce, high resolution of 13.5 lp mm-1 for X-ray imaging. This work presents a new structural design to fabricate 0D hybrids with multicolor emissions.

Multi-stimuli-responsive luminescence enabled by crown ether anchored chiral antimony halide phosphors

Stimuli-responsive optical materials have provided a powerful impetus for the development of intelligent optoelectronic devices. The family of organic-inorganic hybrid metal halides, distinguished by their structural diversity, presents a prospective platform for the advancement of stimuli-responsive optical materials. Here, we have employed a crown ether to anchor the A-site cation of a chiral antimony halide, enabling convenient control and modulation of its photophysical properties. The chirality-dependent asymmetric lattice distortion of inorganic skeletons assisted by a crown ether promotes the formation of self-trapped excitons (STEs), leading to a high photoluminescence quantum yield of over 85%, concomitant with the effective circularly polarized luminescence. The antimony halide enantiomers showcase highly sensitive stimuli-responsive luminescent behaviours towards excitation wavelength and temperature simultaneously, exhibiting a versatile reversible colour switching capability from blue to white and further to orange. In situ temperature-dependent luminescence spectra, time-resolved luminescence spectra and theoretical calculations reveal that the multi-stimuli-responsive luminescent behaviours stem from distinct STEs within zero-dimensional lattices. By virtue of the inherent flexibility and adaptability, these chiral antimony chlorides have promising prospects for future applications in cutting-edge fields such as multifunctional illumination technologies and intelligent sensing devices.

Zero-dimensional hybrid tin halides with stable broadband light emissions

Considering the instability and toxicity of 3D Pb-based perovskite nanocrystals, lead-free low-dimensional organic-inorganic hybrid metal halides have attracted widespread attention as potential substitutes. Herein, two new tin-based 0D halides [H4BAPP]SnBr5·Br and [H4BAPP]SnCl5·Cl·H2O (BAPP = 1,4-bis(3-aminopropyl)piperazine) were synthesized successfully based on [SnX5]3- as an emission center. Typically, [H4BAPP]SnBr5·Br and [H4BAPP]SnCl5·Cl·H2O display broadband yellow and yellow-green light emissions originating from the radiative recombination of self-trapped excitons (STEs). The photoluminescence quantum yields (PLQYs) of the two compounds were calculated to be 19.27% and 2.36%, respectively. Furthermore, the excellent chemical and thermal stability and broadband light emissions reveal their potential application in solid-state white lighting diodes.

Temperature-controlled tunable emission of Bi3+-doped Rb2SnCl6 all-inorganic vacancy ordered lead-free perovskite for advanced anticounterfeiting

At present, tuning the luminescence characteristics of phosphors by external physical stimuli such as temperature and pressure has attracted the interest of researchers. However, the emission-tunable luminescence processes by temperature or pressure in lead-free perovskite with ordered vacancy materials have not been systematically studied. In this study, Bi3+-doped Rb2SnCl6 crystals were successfully synthesized using a simple precipitation method, and these crystals demonstrated a remarkable enhancement of luminescence intensity compared with the unannealed ones at 140-200 °C, and with a red-shift in the emission peak from 450 to 500 nm. It was found that the annealing treatment increased the Bi-Cl bond length leading to emission red-shift and achieved the change in the emission intensity due to the band gap modulation of the material. Furthermore, a candidate material for the color-changing optical security strategies was obtained by combining the Bi3+-doped Rb2SnCl6 phosphor and printing ink. This work is a valuable reference for the rational design of luminescent perovskites with promising new functionalities and stimulates the great potential of luminescent perovskites in developing promising phosphors for advanced anticounterfeiting.

RGB tri-luminescence in organic-inorganic zirconium halide perovskites

Materials with two or more fluorescence features under different excitation sources have great potential in optical applications, but luminous materials with three emission characteristics have been largely undeveloped. Here, we report a novel zero-dimensional (0D) organic-inorganic hybrid ((C2H5)4N)2ZrCl6 perovskite with multiple emissions. The zirconium-based perovskite exhibits a red emission around 620 nm, a green emission at 527 nm, and a blue emission around 500 nm. The red and green emissions come from self-trapped excitons (STEs) and the d-d transitions of Zr(iv), respectively, which are caused by distortion of the [ZrCl6]2- octahedra. The blue emission is caused by thermally activated delayed fluorescence (TADF), which is similar to that of Cs2ZrCl6. The absolute photoluminescence quantum yield (PLQY) of the red and blue double emission is up to 83% and the PLQY of the green emission is 27%. With different combinations of ((C2H5)4N)2ZrCl6 samples, we achieve a variety of applications, including a two-color luminescent anti-counterfeiting device, a white light-emitting diode (WLED) with a color rendering index (CRI) of 95 and information encryption with different excitations. We also synthesize other hybrid zirconium perovskites with tri-luminescence through a similar method. Our work provides a potential set of excitation-dependent luminescent materials and is expected to expand the basic research and practical applications of multi-luminescence materials.

Polymeric Metal Halides with Bright Luminescence and Versatile Processability

Most of current metal halide materials, including all inorganic and organic-inorganic hybrids, are crystalline materials with poor workability and plasticity that limit their application scope. Here, we develop a novel class of materials termed polymeric metal halides (PMHs) through introducing polycations into antimony-based metal halide materials as A-site cations. A series of PMHs with orange-yellow broadband emission and large Stokes shift originating from inorganic self-trapped excitons are successfully prepared, which meanwhile exhibit the excellent processability and formability of polymers. The versatility of these PMHs is manifested as the broad choices of polycations, the ready extension to manganese- and copper-based halides, and the tolerance to molar ratios between polycations and metal halides in the formation of PMHs. The merger of polymer chemistry and inorganic chemistry thus provides a novel generic platform for the development of metal halide functional materials.

Development of Quasi-Two-Dimensional Perovskites and Their Application in Light-Emitting Diodes

Quasi-two-dimensional (quasi-2D) perovskites have attracted much attention due to their outstanding properties, such as inherent quantum-well structure, strong dielectric and quantum confinement, large exciton binding energy, and high photoluminescence quantum yield. By virtue of these superior merits, quasi-2D perovskites have shown great potential for next-generation light-emitting diodes (LEDs). Herein, this review presents an overview of the basic properties of quasi-2D perovskites and their photoluminescence modulations by large organic cation engineering, monovalent cation engineering, halogen engineering, defect passivation engineering, and dimensionality engineering. Furthermore, the strategies of charge-transport layer optimization, interfacial engineering, light-outcoupling efficiency improvement, and operating stability improvement are summarized for fabricating high-performance quasi-2D perovskite LEDs (PeLEDs). Finally, the challenges and outlook for the future development of quasi-2D PeLEDs are unambiguously proposed.

Designing Optical Anisotropy: Silver-Aminoalkylpyridine Nitrate Complexes with Tunable Structures

To introduce a design strategy for improving optical properties, two silver-amino alkylpyridine nitrate complexes, AgC6H8N3O3 and Ag2C14H20N6O6, were successfully synthesized using a recrystallization method. By employing polarizable π-conjugated [NO3-] ions, two types of pyridine ligands, and silver cations with a high affinity for pyridine, we obtained a one-dimensional chain structure with 4-aminomethylpyridine (AgC6H8N3O3) and a zero-dimensional molecular compound by introducing a relatively flexible aliphatic chain with 4-(2-aminoethyl)pyridine (Ag2C14H20N6O6). The compounds crystallize in the triclinic crystal system with the centrosymmetric P-1 space group, exhibiting a change in orientation between the π-conjugated system and the silver ion. Despite similar optical band gaps (3.69 eV for AgC6H8N3O3 and 3.73 eV for Ag2C14H20N6O6), AgC6H8N3O3 shows higher absorption in the 350-600 nm range. Electronic structure calculations support the ultraviolet absorption findings, suggesting that charge transfer with π-conjugated systems influences birefringence. Ag2C14H20N6O6 exhibits experimental birefringence (0.261@546.1 nm) surpassing that of AgC6H8N3O3 (0.212@546.1 nm), placing it among the highest recorded values within metal-pyridine incorporating nitrate complexes. The nonconventional orientation of π-conjugated [NO3-] ions contributes to this phenomenon, enhancing the action of free π-conjugated orbitals. This design strategy for micromodulating the alignment of the π-conjugated system promises to be an effective approach for enhancing optical properties, such as birefringence.

A 0D hybrid lead-free halide with near-unity photoluminescence quantum yield toward multifunctional optoelectronic applications

Zero-dimensional (0D) hybrid metal halides have emerged as highly efficient luminescent materials, but integrated multifunction in a structural platform remains a significant challenge. Herein, a new hybrid 0D indium halide of (Im-BDMPA)InCl6·H2O was designed as a highly efficient luminescent emitter and X-ray scintillator toward multiple optoelectronic applications. Specifically, it displays strong broadband yellow light emission with near-unity photoluminescence quantum yield (PLQY) through Sb3+ doping, acting as a down-conversion phosphor to fabricate high-performance white light emitting diodes (WLEDs). Benefiting from the high PLQY and negligible self-absorption characteristics, this halide exhibits extraordinary X-ray scintillation performance with a high light yield of 55 320 photons per MeV, which represents a new scintillator in 0D hybrid indium halides. Further combined merits of a low detection limit (0.0853 μGyair s-1), ultra-high spatial resolution of 17.25 lp per mm and negligible afterglow time (0.48 ms) demonstrate its excellent application prospects in X-ray imaging. In addition, this 0D halide also exhibits reversible luminescence off-on switching toward tribromomethane (TBM) but fails in any other organic solvents with an ultra-low detection limit of 0.1 ppm, acting as a perfect real-time fluorescent probe to detect TBM with ultrahigh sensitivity, selectivity and repeatability. Therefore, this work highlights the multiple optoelectronic applications of 0D hybrid lead-free halides in white LEDs, X-ray scintillation, fluorescence sensors, etc.

Cd8(BO3)4SiO4: Metal Cation Inducing the Formation of Isolated [BO3] and [SiO4] Units in Borate Silicate

The first compound of cadmium-borate silicate Cd8(BO3)4SiO4, crystallizing in space group P42/n (no. 86), has been successfully synthesized by the conventional high-temperature solution method and melts congruently. The zero-dimensional anionic groups of Cd8(BO3)4SiO4 are isolated [BO3] triangles and isolated [SiO4] tetrahedra which are filled in the framework formed by [CdO6] polyhedra. It has a moderate birefringence (Δn = 0.053 at 546 nm), which is measured by experiment and evaluated by first-principles calculations; meanwhile, the source of birefringence is revealed through the response electronic distribution anisotropy method. The UV-vis-NIR diffuse reflectance spectrum indicates that Cd8(BO3)4SiO4 possesses a wide optical transparency range, with a UV cutoff edge at about 254 nm. This work enriches the structure chemistry of borate silicates, and we discussed the possible methods for the exploration and synthesis of novel optical crystals possessing zero-dimensional anionic groups in the borate silicate system.

Supramolecular assembly of blue and green halide perovskites with near-unity photoluminescence

The metal-halide ionic octahedron is the optoelectronic unit for halide perovskites, and a crown ether-assisted supramolecular assembly approach can pack various ionic octahedra into tunable symmetries. In this work, we demonstrate near-unity photoluminescence quantum yield (PLQY) blue and green emission with the supramolecular assembly of hafnium (Hf) and zirconium (Zr) halide octahedral clusters. (18C6@K)2HfBr6 powders showed blue emission with a near-unity PLQY (96.2%), and green emission was also achieved with (18C6@K)2ZrCl4Br2 powders at a PLQY of 82.7%. These highly emissive powders feature facile low-temperature solution-based synthesis conditions and maintain high PLQY in solution-processable semiconductor inks under ambient conditions, and they were used in thin-film displays and emissive three-dimensional-printed architectures that exhibited high spatial resolution.

Antimony Doping Enabled Photoluminescence Quantum Yield Enhancement in 0D Inorganic Bismuth Halide Crystals

Owing to the exterior self-trapped excitons (STEs) with adjustable fluorescence beams, low-dimensional ns2-metal halides have recently received considerable attention in solid-state light-emitting applications. However, the photoluminescence (PL) mechanism in metal halides remains a major challenge in achieving high efficiency and controllable PL properties because the excited-state energy of ns2 conformational ions varies inhomogeneously with their coordination environments. Here, a novel zero-dimensional (0D) lead-free bismuth-based Rb3BiCl6·0.5H2O crystal was reported as a pristine crystal to modulate the optical properties. By doping Sb3+ ions with 5s2 electrons into Rb3BiCl6·0.5H2O crystals, bright orange emission at room temperature was obtained with a photoluminescence quantum yield of 39.7%. Optical characterizations and theoretical studies show that the Sb3+ doping can suppress the strong exciton-phonon coupling, optimize the electronic energy band structure, improve the thermal activation energy, soften the structural lattice of the host crystals, deepen the STE states, and ultimately lead to strong photoluminescence. This work manifests a fruitful manipulation in ripening bismuth-based halides with high-efficiency PL properties, and the PL enhancement mechanisms will guide future research in the exploration of emerging luminescent materials.

Lead Halide Hybrids Templated by Two Coordinating Ligands for Enhanced and Stable Self-Trapped Emission

Lead halide hybrids templated by coordinating ligands are a class of ultrastable broadband self-trapped emitters that overcome the stability problems of conventional ionically bound halide hybrids. However, enhancing their photoluminescence (PL) performances by crystal engineering remains a huge challenge. Herein, for the first time, we have successfully employed the synthetic strategy of two coordinating ligands to synthesize a series of layered lead halide coordination polymers, [Pb6X10]2+(chdc2-)(2,2'-bpy)2 (X = Cl/Br, chdc = trans-1,4-cyclohexanedicarboxylate), which involves chdc as a pillaring strut and 2,2'-bpy as a chelating ligand. The introduction of a chelating ligand (2,2'-bpy) enables stronger lattice distortion of lead halide layers and enhances UV-light absorption and ligand-to-metal charge transfer (LMCT) process, thereby achieving a substantial improvement of photoluminescence quantum yields (PLQYs) over the control layered materials templated by a single chdc ligand. This class of lead halide hybrids templated by two coordinating ligands exhibit chemical "inertness" after being subjected to various chemical conditions for 48 h, maintaining stable and efficient broadband emission. Density functional theory calculations and femtosecond transient absorption spectra (fs-TA) demonstrate that the broadband emission originates from self-trapped excitons, which are more populated with the LMCT contribution from 2,2'-bpy. This study shows a rational strategy at the molecular level to modulate the photophysical properties of chemically robust lead halide coordination polymers.

Antimony-Triggered Tunable White Light Emission in Lead-Free Zero-Dimensional Indium Halide with Ultrastable CCT of White Light Emitting Diodes

A highly efficient and easily tunable luminescence is significant for solid-state luminescent (SSL) materials. However, achieving a photoluminescence quantum yield (PLQY) close to unity and tuning the emission remain challenging tasks. Metal doping strategies enable resolution of these issues. Herein, we report the preparation of a novel organic-inorganic lead-free indium-based metal halide hybrid (MP)3InCl6•EtOH (MP = C4H10ON) with a typical zero-dimension structure. When excited at 320 nm, (MP)3InCl6•EtOH exhibits a dual emission band at 420 and 600 nm, which originates from the organic cation [MP] and the [InCl6]3- octahedral unit. The photoluminescence can be significantly enhanced through Sb3+ doping, resulting in an increase in PLQY from 0.78% to near unity. Multiple emission color tunings have been achieved by regulating the Sb doping level and the radiation wavelength, resulting in a change in emission color from blue → white → orange. Optical characterizations reveal that the significantly enhanced emission centered at 600 nm can be attributed to more efficient absorption, closely associated with an additional 1S0 → 3P1 transition in the inorganic octahedron [In(Sb)Cl6]3- due to Sb3+ doping. With its excellent optical performance, a white light emitting diode (WLED) has been successfully fabricated by coating the mixture of (MP)3InCl6•EtOH:15%Sb3+ with blue phosphor BaMgAl10O17:Eu2+ onto a UV LED chip. The WLED device exhibits perfect white light emission with regard to the International Commission on Illumination (CIE) coordinates of (0.36, 0.34). Significantly, the WLED device maintains a stable correlated color temperature (CCT) range of 4119-4393 K and CIE coordinates (x: 0.37-0.34, y: 0.35-0.33) as the driven current varies from 20 to 200 mA, demonstrating outstanding stability across different power levels. This work not only presents a novel system for achieving remarkably enhanced luminescent performance and tuning emission bands in 0D metal halides but also represents a significant step toward achieving resistance to color drifting for stable WLEDs.

Zero-Dimensional Hybrid Antimony Chloride with Near-Unity Broad-Band Orange-Red Emission toward Solid-State Lighting

Zero-dimensional (0D) hybrid metal halides are attractive owing to their distinctive structure as well as photoluminescence (PL) characteristics. To discover 0D hybrid metal halides with high photoluminescence quantum yield and good stability is of great significance for white light-emitting diodes (LEDs). Herein, a novel hybrid antimony chloride (CTP)2SbCl5 is synthesized, which shows a bright broad-band orange-red emission peaking at 620 nm under the low energy excitation (365 nm), achieving an excellent photoluminescence quantum yield of 96.8%. In addition, (CTP)2SbCl5 shows an additional emission peaking at 470 nm when excited at high energy (323 nm). PL spectra and density functional theory results demonstrate that the observed dual-band emission originates from the singlet and triplet self-trapped excitons confined in isolated [SbCl5]2- square pyramids. Moreover, (CTP)2SbCl5 presents relatively superior air stability, and the PL intensity still maintains 78% of the initial PL intensity when exposed to the air for above 2 weeks. Benefiting from high-efficiency PL emission and good stability of (CTP)2SbCl5, a stable warm white LED device with a 92.3% color rendering index was prepared by coating blue phosphor BaMgAl10O17:Eu2+, green (Sr,Ba)2SiO4:Eu2+, and orange-red (CTP)2SbCl5 on a 365 nm LED chip. This work provides an efficient luminescent material and also demonstrates the potential application of 0D hybrid antimony chloride in solid-state lighting.

Pressure-Regulated Excitonic Transitions in Emergent Metal Halides

ConspectusEmergent metal halides are generating significant interest as novel optical materials, and their diverse applications have brought them to the spotlight of chemistry and material science. The optical properties of semiconducting metal halides are fundamentally dominated by excitonic transitions, which refer to the complex processes of excitonic formation, self-trapping, as well as subsequent transitions of intersystem crossing (ISC) and internal conversion (IC). In this regard, high pressure has recently opened a new research dimension to regulate excitonic transitions in metal halides via continuous structural modulations, to understand the intriguing excitonic emissions from a new perspective. In this Account, we aim to rationalize the fundamental strategy for modulating and optimizing the optical properties of metal halides based on delicate exciton regulation via high-pressure method. First, the band gaps of metal halides that are directly related to the efficiency of excitonic formation, are accurately modulated through contraction, distortion, and destruction of metal-halogen polyhedra under compression. Then, considerable enhancement of self-trapped exciton emission is demonstrated by inducing proper polyhedral distortions via high-pressure method. Furthermore, the emission energy of metal halides could also be controllably and widely tuned through pressure-modulated excitonic transitions. Upon compression on different metal halides, excitonic IC is promoted with sufficient polyhedral distortions, and different sets of ISC could also be achieved. In the end, we emphasize the significance of high-pressure investigations in uncovering the complex excitonic transitions in emergent metal halides and predicting novel metal halides with desired optical properties at ambient conditions. It is expected that these discussions could inspire researchers in different fields to perform interdisciplinary high-pressure studies on novel functional materials.

Dimension Tuning of All-Inorganic Ag-Based Metal Halides by Solvent Engineering

Dimension growth of metal halides is important for its properties and applications. However, such dimension control of the metal halides is rarely reported in the literature and the growth mechanism is not clear yet. A minute difference of solvent properties can tremendously alter the process of nucleation and growth of crystals. Herein, an intriguing phenomenon of dimension tuning for Ag-based metal halides is reported. The 1D Cs2 AgCl3 crystals can be obtained in pure DMF while the 2D CsAgCl2 crystals are obtained in pure DMSO. Both exhibit bright yellow emission, which are derived from self-trapping excitons (STEs). The photoluminescence quantum yield (PLQY) of Cs2 AgCl3 (1D) and CsAgCl2 (2D) are 28.46 % and 20.61 %, respectively. In order to understand the mechanism of the dimension change, additional solvents (N,N-dimethylacetamide, DMAC, 1,3-Dimethyl-Tetrahydropyrimidin-2(1H)-one, DMPU) are also selected to process the precursor for crystal growth. By comparing the functional group, dielectric constant, and donor number among the four solvents, we find the donor number plays the predominant role in nucleation process for Cs2 AgCl3 and CsAgCl2 . This research reveals the relationship between coordination ability of the solvent and the dimension of metal halides.

Optical enhancement of highly efficient organic-inorganic oxyfluoride red phosphors via the cation co-doping strategy

Herein, a new organic cationic matrix [N(CH3)4]3MoO3F3 suitable for Mn4+ doping was constructed. Due to the large steric hindrance of N[CH3]4+ (TMA), charge compensation defects can be effectively prevented in the heterovalent Mn4+-doping process, and a high IQE (91.05%) was obtained. Through the cation co-doping strategy, Mg2+/Zn2+/Li+ cations were introduced into the Mo6+ cationic site, which improved the crystallinity of the matrix and reduced energy losses, so as to improve luminescence intensity, QE, thermal stability, water stability and other spectral properties. Meanwhile, [N(CH3)4]2TiF6:Mn4+ phosphors with the same TMA organic cation and equivalent Mn4+ doping were synthesized for comparison, and the effects of the Mg2+ cation co-doping strategy on the spectral properties of phosphors with different matrix types (fluoride/oxyfluoride) and substitution types (equivalent/non-equivalent) were analyzed. These findings provide the basis for the preparation of new luminescent materials. Furthermore, according to the optical properties exhibited by these phosphors, they are packaged into WLED devices with excellent photoelectric properties, which are suitable for indoor lighting and display fields.

Manipulating Lone-Pair-Driven Luminescence in 0D Tin Halides by Pressure-Tuned Stereochemical Activity from Static to Dynamic

The excellent luminescence properties and structural dynamics driven by the stereoactivity of the lone pair in a variety of low-dimensional ns2 metal halides have attracted growing investigations for optoelectronic applications. However, the structural and photophysical aspects of the excited state associated with the lone pair expression are currently open questions. Herein, zero-dimensional Sn-based halides with static stereoactive 5 s2 lone pairs are selected as a model system to understand the correlations between the distinctive lone pair expression and the excited-state structural relaxation and charge carrier dynamics by continuous lattice manipulation. Lattice compression drives 5 s2 lone pair active switching and self-trapped exciton (STE) redistribution by suppressing excited-state structural deformation of the isolated SnBr4 2- units. Our results demonstrate that the static expression of the 5 s2 lone pair results in a red broadband triplet STE emission with a large Stokes shift, while its dynamic expression creates a sky-blue narrowband emission dominated by the radiative recombination of singlet STEs. Our findings and the photophysical mechanism proposed highlight the stereochemical effects of lone pair expression in controlling light emission properties and offer constructive guidelines for tuning the optoelectronic properties in diverse ns2 metal halides.

Breaking the Inherent Interarrangement of [B3O6] Clusters for Nonlinear Optics with Orbital Hybridization Enhancement

The [B3O6] group as a prime functional unit provides borates with intrinsic properties that are modified by coordination to cations. Inherent [B3O6] cluster structures in borates exclusively made of them have a near-plane configuration, with more than 90% of them having a maximum dihedral angle of zero and the remaining ones being less than 13°. Although such an inherent configuration can produce considerable birefringence for good phase-matching ability, this is not conducive to obtaining high conversion efficiency and beam quality due to the walk-off effects in the nonlinear optical process. In this article, two new borate halides Ca2B3O6X (X = Cl and Br) were reported, in which the confinement effects of distorted halogen-centered secondary building blocks compress the existence space of [B3O6] primitives, resulting in the nonparallel arrangement between [B3O6] clusters in this series. Both compounds show large second harmonic generation effects, and more importantly, the broken inherent interarrangement of [B3O6] clusters makes them a moderate birefringence and small walk-off angle. Their moderate birefringence is due to the large angular alignment between [B3O6] clusters, resulting from the orbital hybridization between the Ca s and the O p orbitals of the terminal O atoms on [B3O6] clusters. Our model supports this viewpoint and offers guidelines for rearranging [B3O6] clusters' arrangements in borates.

In situ recrystallization of zero-dimensional hybrid metal halide glass-ceramics toward improved scintillation performance

Zero-dimensional (0D) hybrid metal halide (HMH) glasses are emerging luminescent materials and have gained attention due to their transparent character and ease of processing. However, the weakening of photoluminescence quantum efficiency from crystal to glass phases poses limitations for photonics applications. Here we develop high-performance glass-ceramic (G-C) scintillators via in situ recrystallization from 0D HMH glass counterparts composed of distinct organic cations and inorganic anions. The G-C scintillators maintain excellent transparency and exhibit nearly 10-fold higher light yields and lower detection limits than those of glassy phases. The general in situ recrystallization within the glass component by a facile heat treatment is analyzed via combined experimental elaboration and structural/spectral characterization. Our results on the development of G-Cs can initiate more exploration on the phase transformation engineering in 0D HMHs, and therefore make them highly promising for large-area scintillation screen applications.

Solution-Obtained (NH4)3In0.95Sb0.05Cl6 with High External Photoluminescence Quantum Yield and Excellent Antiquenching Properties

The efficient broad-band emission from low-dimensional metal halides has garnered significant interest. However, most of these materials exhibit poor stability at the operating temperature of light-emitting diodes. In this study, using the solution method (temperature lower than 90 °C), a new compound (NH4)3In0.95Sb0.05Cl6 was obtained with the structure in the Pnma space group featuring unit-cell parameters of a = 12.3871(4) Å, b = 24.9895(9) Å, and c = 7.7844(3) Å. (NH4)3In0.95Sb0.05Cl6 can be prepared by doping (NH4)2InCl5·H2O when the Sb3+ feeding ratio is in the range of 30-80%. Thermal analysis reveals that (NH4)3In0.95Sb0.05Cl6 is stable up to 320 °C. (NH4)3In0.95Sb0.05Cl6 exhibits broad-band yellow-white emission with extremely high internal and external photoluminescence quantum yields of 93 and 77%, respectively. Interestingly, (NH4)3In0.95Sb0.05Cl6 displays remarkable resistance to thermal quenching, retaining 83% of its initial photoluminescence intensity at 80 °C. A white light-emitting diode is fabricated by combining (NH4)3In0.95Sb0.05Cl6 with a commercial phosphor, and a high color rendering of 92.8 was obtained. This work presents an environmentally friendly, efficient, stable UV-excited broad-band emission material for potential solid-state lighting applications.

Water-Molecule-Induced Reversible Fluorescence in a One-Dimensional Mn-Based Hybrid Halide for Anticounterfeiting and Digital Encryption-Decryption

Hybrid metal halides with reversible transformation of structure and luminescence properties have attracted significant attention in anticounterfeiting. However, their long transition time and slow response rate may hinder the rapid identification of confidential information. Here, a one-dimensional hybrid manganese-based halide, i.e., (C5H11N3)MnCl2Br2·H2O, is prepared and demonstrates the phenomenon of water-molecule-induced reversible photoluminescence transformation. Heating for <40 s induces a dynamic transfer of red-emissive (C5H11N3)MnCl2Br2·H2O to green-emissive (C5H11N3)MnCl2Br2. In addition, the green emission can gradually revert to red emission during a cooling process in a moist environment, demonstrating excellent reversibility. It is found that the water molecule acts as an external stimulus to realize the reversible transition between red and green emission, which also exhibits remarkable stability during repeated cycles. Furthermore, with the assistance of heating and cooling, a complex digital encryption-decryption and an optical "AND" logical gate are achieved, facilitating the development of anticounterfeiting information security.