Removal and Oxidation of Low Concentration tert-Butanol from Potable Water using Nonthermal Plasma Coupled with Metal Oxide Adsorption

Taste and odor are crucial factors in evaluating the quality of drinking water for consumers. Geosmin is an example of a pollutant commonly found in potable water responsible for earthy and musty taste, and odor even at low concentrations. We have investigated the use of a hybrid two-step adsorption-mineralization process for low-level volatile organic compounds removal from potable water using dielectric barrier discharge over common metal oxides (MO). The system proposed is a proof of principle with tert-butanol (TBA) used as a model compound for geosmin removal/degradation during wastewater treatment when combined with an appropriate metal oxide adsorbent. Initial assessments of the adsorption properties of titania by density functional theory (DFT) calculations and experimental tests indicated that the adsorption of geosmin and TBA with water present results in only weak interactions between the sorbate and the metal oxide. In contrast, the DFT results show that alumina could be a suitable adsorbent for these tertiary alcohols and were reinforced by experimental studies. We find that while there is a competitive effect between the water and TBA adsorption from gaseous/liquid feed, the VOC can be removed, and the alumina will be regenerated by the reactive oxygen species (ROS) produced by a dielectric barrier discharge (DBD). The use of alumina in conjunction with NTP leads to efficient degradation of the adsorbate and the formation of oxygenated intermediates (formates, carbonates, and carboxylate-type species), which could then be mineralized for the regeneration of the adsorbent. A reaction mechanism has been proposed based on the in-situ infrared measurements and DFT calculations, while the removal of TBA with conventional heating is indicative of a gradual desorption process as a function of temperature rather than the destruction of the adsorbate. Furthermore, steady performance was observed after several adsorption-regeneration cycles, indicating no alteration of the adsorption properties of alumina during the NTP treatment and demonstrating the potential of the approach to be applied in the treatment of high throughput of water, without the challenges faced by the biocatalysts or formation of toxic byproducts.

Recent advances in the abatement of volatile organic compounds (VOCs) and chlorinated-VOCs by non-thermal plasma technology: A review

Most of the volatile organic compounds (VOCs) and especially the chlorinated volatile organic compounds (Cl-VOCs), are regarded as major pollutants due to their properties of volatility, diffusivity and toxicity which pose a significant threat to human health and the eco-environment. Catalytic degradation of VOCs and Cl-VOCs to harmless products is a promising approach to mitigate the issues caused by VOCs and Cl-VOCs. Non-thermal plasma (NTP) assisted catalysis is a promising technology for the efficient degradation of VOCs and Cl-VOCs with higher selectivity under relatively mild conditions compared with conventional thermal catalysis. This review summarises state-of-the-art research of the in plasma catalysis (IPC) of VOCs degradation from three major aspects including: (i) the design of catalysts, (ii) the strategies of deep catalytic degradation and by-products inhibition, and (iii) the fundamental research into mechanisms of NTP activated catalytic VOCs degradation. Particular attention is also given to Cl-VOCs due to their characteristic properties of higher stability and toxicity. The catalysts used for the degradation Cl-VOCs, chlorinated by-products formation and the degradation mechanism of Cl-VOCs are systematically reviewed in each chapter. Finally, a perspective on future challenges and opportunities in the development of NTP assisted VOCs catalytic degradation were discussed.

Non-thermal plasma activated CO2 hydrogenation over K- and La- promoted layered-double hydroxide supported Ni catalysts

The catalytic conversion of CO2 to CH4 and CO over nickel particles supported on layered-double hydroxide (MgAl) with different metal promoters was investigated under non-thermal plasma (NTP) conditions. It has been shown that lanthanum-promoted Ni catalysts significantly enhanced the CO2 conversion in comparison to the 10Ni/MgAl catalyst (33.4% vs. 89.3%). In comparison, for the potassium-promoted catalysts, CO2 conversion is similar to that of 10Ni/MgAl but the CO selectivity increased significantly (35.7% vs. 62.0%). The introduction of La and K to Ni catalysts increased the Ni dispersion and improved the reducibility of Ni species, thus affecting CO2 conversion and product selectivity. In situ DRIFTS showed similar reaction pathways for La- and K- promoted catalysts with Ni catalysts. However, the La and K promoters significantly improved the formation of formate species on the Ni surface, facilitating CO2 conversion to useful products.

Observation of surface species in plasma-catalytic dry reforming of methane in a novel atmospheric pressure dielectric barrier discharge in situ IR cell

Our in situ operando IR DBD cell makes it possible to study the surface species formed in a plasma-catalytic system.

Direct Observation of Plasma-Stimulated Activation of Surface Species Using Multimodal In Situ/Operando Spectroscopy Combining Polarization-Modulation Infrared Reflection-Absorption Spectroscopy, Optical Emission Spectroscopy, and Mass Spectrometry

Nonthermal plasmas (NTPs) produce reactive chemical environments, including electrons, ions, radicals, and vibrationally excited molecules, that can drive chemistry at temperatures at which such species are thermally inaccessible. There has been growing interest in the integration of conventional catalysis with reactive NTPs to promote novel chemical transformations. Unveiling the full potential of plasma-catalytic processes requires a comprehensive understanding of plasma-catalytic synergies, including characterization of plasma-catalytic surface interactions. In this work, we report on a newly designed multimodal spectroscopic instrument combining polarization-modulation infrared reflection-absorption spectroscopy (PM-IRAS), mass spectrometry, and optical emission spectroscopy (OES) for the investigation of plasma-surface interactions such as those found in plasma catalysis. In particular, this tool has been utilized to correlate plasma-phase chemistry with both surface chemistry and gas-phase products in situ (1) during the deposition of carbonaceous surface species via NTP-promoted nonoxidative coupling of methane and (2) during subsequent activation of surface deposits with an atmospheric pressure and temperature argon plasma jet on both nickel (Ni) and silicon dioxide (SiO₂) surfaces. For the first time, the activation of carbonaceous surface species by a NTP on Ni and SiO₂ surfaces to form hydrogen gas and C₂ hydrocarbons was directly observed, where both PM-IRAS and OES measurements suggest that they may form through different pathways. This unique tool for studying plasma-surface interactions could enable more rational design of plasma-stimulated catalytic processes.

Non-Thermal Plasma for Process and Energy Intensification in Dry Reforming of Methane

Plasma-assisted dry reforming of methane (DRM) is considered as a potential way to convert natural gas into fuels and chemicals under near ambient temperature and pressure; particularly for distributed processes based on renewable energy. Both catalytic and photocatalytic technologies have been applied for DRM to investigate the CH4 conversion and the energy efficiency of the process. For conventional catalysis; metaldoped Ni-based catalysts are proposed as a leading vector for further development. However; coke deposition leads to fast deactivation of catalysts which limits the catalyst lifetime. Photocatalysis in combination with non-thermal plasma (NTP), on the other hand; is an enabling technology to convert CH4 to more reactive intermediates. Placing the catalyst directly in the plasma zone or using post-plasma photocatalysis could generate a synergistic effect to increase the formation of the desired products. In this review; the recent progress in the area of NTP-(photo)catalysis applications for DRM has been described; with an in-depth discussion of novel plasma reactor types and operational conditions including employment of ferroelectric materials and nanosecond-pulse discharges. Finally, recent developments in the area of optical diagnostic tools for NTP, such as optical emission spectroscopy (OES), in-situ FTIR, and tunable diode laser absorption spectroscopy (TDLAS), are reviewed.