Molybdenum Oxycarbide Supported Rh-Clusters with Modulated Interstitial C-O Microenvironments for Promoting Hydrogen Evolution

Tuning the microenvironment and electronic structure of support materials is essential strategy to induce electron transfer between supports and active centers, which is of great importance in optimizing catalytic kinetics. In this study, the molybdenum oxycarbide supported Rh-clusters are synthesized with modulated interstitial C-O microenvironments (Rh/MoOC) for promoting efficient hydrogen evolution in water splitting. Both electronic structure characterizations and theoretical calculations uncover the apparent charge transfer from Rh to MoOC, which optimizes the d-band center, H₂ O adsorption energy, and hydrogen binding energy, thus enhancing its intrinsic hydrogen-evolving activities. In addition, the co-occurrence of interstitial C and O atoms in MoOC supports plays a vital role in the dissociation reaction of water during the hydrogen-evolving process. Impressively, the Rh/MoOC exhibits excellent hydrogen-evolving activities in terms of exceptional turnover frequency values (11.4 and 39.41 H₂ s^-1 in alkaline and acidic media) and mass activities (21.3 and 73.87 A mg^-1 in alkaline and acidic media) at an overpotential of 100 mV, which is more than 40 times higher than that of the benchmark commercial Rh/C catalysts. This work sheds new light on designing water dissociation materials that surpasses most of the reported catalysts.

Molten Salt-Assisted Catalytic Preparation of MoS2/α-MoO3/Graphene as High-Performance Anode of Li-Ion Battery

We report on the facile and scalable catalytic conversion of natural graphite and MoS2 minerals into α-MoO3 nanoribbons incorporated into hexagonal MoS2 and graphene nanosheets, and evaluate the structural, morphological and electrochemical performances of the hybrid nanostructured material obtained. Mechanochemical treatment of raw materials, followed by catalytic molten salt treatment leads to the formation of nanostructures with promising electrochemical performances. We examined the effect of processing temperature on the electrochemical performance of the products. At 1100 °C, an excellent Li-ion storage capacity of 773.5 mAh g−1 is obtained after 180 cycles, considerably greater than that of MoS2 (176.8 mAh g−1). The enhanced capacity and the rate performance of this electrode are attributed to the well-integrated components, characterized by the formation of interfacial molybdenum oxycarbide layer during the synthesis process, contributing to the reduced electrical/electrochemical resistance of the sample. This unique morphology promotes the charge and ions transfer through the reduction of the Li-ion diffusion coefficient (1.2 × 10−18 cm2 s−1), enhancing the pseudocapacitive performance of the electrode; 59.3% at the scan rate of 0.5 mV s−1. This article provides a green and low-cost route to convert highly available natural graphite and MoS2 minerals into nanostructured hybrid materials with promising Li-ion storage performance.

Recent Advances in Carbon Dioxide Adsorption, Activation and Hydrogenation to Methanol using Transition Metal Carbides

The inevitable emission of carbon dioxide (CO₂ ) due to the burning of a substantial amount of fossil fuels has led to serious energy and environmental challenges. Metal-based catalytic CO₂ transformations into commodity chemicals are a favorable approach in the CO₂ mitigation strategy. Among these transformations, selective hydrogenation of CO₂ to methanol is the most promising process that not only fulfils the energy demands but also re-balances the carbon cycle. The investigation of CO₂ adsorption on the surface of heterogeneous catalyst is highly important because the formation of various intermediates which determines the selectivity of product. Transition metal carbides (TMCs) have received considerable attention in recent years because of their noble metal-like reactivity, ceramic-like properties, high chemical and thermal stability. These features make them excellent catalytic materials for a variety of transformations such as CO₂ adsorption and its conversion into value-added chemicals. Herein, the catalytic properties of TMCs are summarize along with synthetic methods, CO₂ binding modes, mechanistic studies, effects of dopant on CO₂ adsorption, and carbon/metal ratio in the CO₂ hydrogenation reaction to methanol using computational as well as experimental studies. Additionally, this Review provides an outline of the challenges and opportunities for the development of potential TMCs in CO₂ hydrogenation reactions.

An efficient way to synthesize biomass-based molybdenum carbide catalyst via pyrolysis carbonization and its application for lignin catalytic pyrolysis

In this study, a simple and rapid method was proposed to synthesize orthorhombic α-Mo₂C as catalyst for lignin catalytic pyrolysis. Biomass in-situ pyrolysis products were used as the carbon source and supporter, the carbonization of Mo precursor was realized under rapid heating. Experimental results show that Pine-Mo₂C catalyst can achieve lignin pyrolysis vapor bond breaking and deoxidation under normal pressure, and the yield of monocyclic aromatic hydrocarbons is 13.26 wt%, of which aromatic hydrocarbons with side chain account for 74%. The side chain aliphatic hydrocarbons of lignin are effectively retained, and hydrogen consumption is minimized. The characterization of catalyst and experiments of guaiacol, 2-phenoxy-1-phenylethanol and 4,4'-biphenol shows that efficient deoxidation is due to targeted attack of catalyst on C-O. Therefore, Pine-Mo₂C shows excellent activity in promoting direct bond breaking deoxidation of lignin.

Understanding the Preparation and Reactivity of Mo/ZSM-5 Methane Dehydroaromatization Catalysts

Methane dehydroaromatization is a promising reaction for the direct conversion of methane to liquid hydrocarbons. The active sites and the mechanism of this reaction remain controversial. This work is focused on the operando X-ray absorption near edge structure spectroscopy analysis of conventional Mo/ZSM-5 catalysts during their whole lifetime. Complemented by other characterization techniques, we derived spectroscopic descriptors of molybdenum precursor decomposition and its exchange with zeolite Brønsted acid sites. We found that the reduction of Mo-species proceeds in two steps and the active sites are of similar nature, regardless of the Mo content. Furthermore, the ZSM-5 unit cell contracts at the beginning of the reaction, which coincides with benzene formation and it is likely related to the formation of hydrocarbon pool intermediates. Finally, although reductive regeneration of used catalysts via methanation is less effective as compared to combustion of coke, it does not affect the structure of the catalysts.

Surface phase structures responsible for the activity and deactivation of the fcc MoC (111)-Mo surface in steam reforming: a systematic kinetic and thermodynamic investigation

Multiscale investigation on MoC surface phase evolution to clarify surface structures responsible for reactivity and deactivation in steam reforming.

A Review of Preparation Strategies for α-MoC1-x Catalysts

Transition metal carbides are attracting growing attention as robust and affordable alternative heterogeneous catalysts to platinum group metals, for a host of contemporary and established hydrogenation, dehydrogenation, and isomerisation reactions. In particular, the metastable α-MoC1-x phase has been shown to exhibit interesting catalytic properties for low temperature processes reliant on O-H and C-H bond activation. While demonstrating exciting catalytic properties, a significant challenge exists in the application of metastable carbides, namely the challenging procedure for their preparation. In this review we will briefly discuss the properties and catalytic applications of α-MoC1-x, followed by a more detailed discussion on available synthesis methods and important parameters that influence carbide properties. Techniques are contrasted with properties of phase, surface area, morphology and Mo:C being considered. Further, we briefly relate these observations to experimental and theoretical studies of α-MoC1-x in catalytic applications. Synthetic strategies discussed are, the original temperature programmed ammonolysis followed by carburisation, alternative oxycarbide or hydrogen bronze precursor phases, heat treatment of moybdate-amide compounds and other low temperature synthetic routes. The importance of carbon removal and catalyst passivation in relation to surface and bulk properties are also discussed. Novel techniques that by-pass the apparent bottle neck of ammonolysis are reported, however a clear understanding of intermediate phases is required to be able to fully apply these techniques. Pragmatically, the scaled application of these techniques requires the pre-pyrolysis wet chemistry to be simple and scalable. Further, there is a clear opportunity to correlate observed morphologies/phases and catalytic properties with findings from computational theoretical studies. Detailed characterisation throughout the synthetic process is essential and will undoubtedly provide fundamental insights that can be used for the controllable and scalable synthesis of metastable α-MoC1-x.