Fundamental insights and recent advances in catalytic oxidation processes using ozone for the control of volatile organic compounds

The development of technologies for highly efficient treatment of emissions containing low concentrations of volatile organic compounds (VOCs) remains an important challenge. Catalytic oxidation with ozone (catalytic ozonation) is useful for the oxidative decomposition of VOCs, particularly aromatic compounds, under ambient temperature conditions. Only inexpensive transition metal oxides are required as catalysts, and Mn-based catalysts are widely used for catalytic ozonation. This review describes the oxidation reaction mechanisms, reaction pathways of aromatic hydrocarbons, and dependence of the catalytic ozonation activity on the reaction conditions. The reasons why Mn oxides are effective in catalytic ozonation are also explained. The structure of the catalytic active sites and the types of supporting materials contributing to the reaction are also discussed in detail, with the aim of establishing a VOC control technology. In addition, recent progress in catalytic oxidation processes using ozone as an oxidant has been outlined, focusing on catalyst materials and reaction conditions.

Catalytic Ozonation of Polluter Benzene from -20 to >50 °C with High Conversion Efficiency and Selectivity on Mullite YMn2O5

Catalytic decomposition of aromatic polluters at room temperature represents a green route for air purification but is currently challenged by the difficulty of generating reactive oxygen species (ROS) on catalysts. Herein, we develop a mullite catalyst YMn₂O₅ (YMO) with dual active sites of Mn³⁺ and Mn⁴⁺ and use ozone to produce a highly reactive O* upon YMO. Such a strong oxidant species on YMO shows complete removal of benzene from -20 to >50 °C with a high CO_x selectivity (>90%) through the generated reactive species O* on the catalyst surface (60 000 mL g^-1 h^-1). Although the accumulation of water and intermediates gradually lowers the reaction rate after 8 h at 25 °C, a simple treatment by ozone purging or drying in the ambient environment regenerates the catalyst. Importantly, when the temperature increases to 50 °C, the catalytic performance remains 100% conversion without any degradation for 30 h. Experiments and theoretical calculations show that such a superior performance stems from the unique coordination environment, which ensures high generation of ROS and adsorption of aromatics. Mullite's catalytic ozonation degradation of total volatile organic compounds (TVOC) is applied in a home-developed air cleaner, resulting in high efficiency of benzene removal. This work provides insights into the design of catalysts to decompose highly stable organic polluters.

Promoting the Catalytic Ozonation of Toluene by Introducing SO42- into the α-MnO2/ZSM-5 Catalyst to Tune Both Oxygen Vacancies and Acid Sites

Mn-based catalysts hold the promise of practical applications in catalytic ozonation of toluene at room temperature, yet improvement of toluene conversion and CO_x selectivity remains challenging. Here, an innovative α-MnO₂/ZSM-5 catalyst modified with SO₄^2- was successfully prepared, and both characterizations and density functional theory (DFT) calculations showed that SO₄^2- introduction facilitated the formation of oxygen vacancies, Lewis and Brönsted acid sites, and active oxygen species and enhanced the adsorption ability of toluene on α-MnO₂/ZSM-5. Characterizations also showed that SO₄^2- introduction made the catalyst possess larger specific surface area, superior reducibility, and stronger surface acidity. As a result, α-MnO₂/ZSM-5 with a S/Mn molar ratio of 0.019 exhibited the best toluene conversion and CO_x selectivity, 87 and 94%, respectively, after the reaction for 8 h at 30 °C under an initial concentration of 5 ppm toluene and 45 ppm ozone, relative humidity of 45%, and space velocity of 32,000 h^-1, far superior to those of non-noble catalysts reported to date under comparable reaction conditions. The synergistic role of increased oxygen vacancies and acid sites of α-MnO₂/ZSM-5 modified with SO₄^2- resulted in excellent toluene conversion and CO_x selectivity. The findings represented a critical step toward the rational design and synthesis of highly efficient catalysts for catalytic ozonation of toluene.

Review on Catalytic Oxidation of VOCs at Ambient Temperature

As an important air pollutant, volatile organic compounds (VOCs) pose a serious threat to the ecological environment and human health. To achieve energy saving, carbon reduction, and safe and efficient degradation of VOCs, ambient temperature catalytic oxidation has become a hot topic for researchers. Firstly, this review systematically summarizes recent progress on the catalytic oxidation of VOCs with different types. Secondly, based on nanoparticle catalysts, cluster catalysts, and single-atom catalysts, we discuss the influence of structural regulation, such as adjustment of size and configuration, metal doping, defect engineering, and acid/base modification, on the structure-activity relationship in the process of catalytic oxidation at ambient temperature. Then, the effects of process conditions, such as initial concentration, space velocity, oxidation atmosphere, and humidity adjustment on catalytic activity, are summarized. It is further found that nanoparticle catalysts are most commonly used in ambient temperature catalytic oxidation. Additionally, ambient temperature catalytic oxidation is mainly applied in the removal of easily degradable pollutants, and focuses on ambient temperature catalytic ozonation. The activity, selectivity, and stability of catalysts need to be improved. Finally, according to the existing problems and limitations in the application of ambient temperature catalytic oxidation technology, new prospects and challenges are proposed.

Catalytic ozonation of VOCs at low temperature: A comprehensive review

VOCs abatement has attracted increasing interest because of the detrimental effects on both atmospheric environment and human beings of VOCs. The assistance of ozone has enabled efficient VOCs removal at low temperature. Thereby, catalytic ozonation is considered as one of the most feasible and effective methods for VOCs elimination. This work systematically reviews the emerging advances of catalytic ozonation of different VOCs (i.e., aromatic hydrocarbons, oxygenated VOCs, chlorinated VOCs, sulfur-containing VOCs, and saturated alkanes) over various functional catalysts. General reaction mechanism of catalytic ozonation including both Langmuir-Hinshelwood and Mars-van-Krevelen mechanisms was proposed depending on the reactive oxygen species involving the reactions. The influence of reaction conditions (water vapor and temperature) is fully discussed. This review also introduces the enhanced VOCs oxidation via catalytic ozonation in the ozone-generating systems including plasma and vacuum ultraviolet. Lastly, the existing challenges of VOCs catalytic ozonation are presented, and the perspective of this technology is envisioned.

3D structured TiO2-based aerogel photocatalyst for the high-efficiency degradation of toluene gas

A 3D TiO2-based aerogel is prepared that improves the mass-transfer efficiency of the gas–solid reaction for the high-efficiency degradation of toluene gas.

Pt/MnOx for toluene mineralization via ozonation catalysis at low temperature: SMSI optimization of surface oxygen species

The problem of deep oxidation of low concentrations of VOCs in industrial tail gas is exceptionally urgent. The preparation of VOCs ozonation catalyst with a high mineralization rate is still a challenge. In this paper, manganese oxide carriers with different morphologies were synthesized by simple methods and used to catalyze ozone mineralization of toluene after loading Pt nanoparticles efficiently. The conversion of toluene over Pt/MnO_x-T catalyst was more than 98 % at ambient temperature, and the mineralization rate of toluene was close to 100 % at 70 °C. Through a variety of characterization methods, the strong metal-support interaction (SMSI) between Pt nanoparticles and carriers was successfully constructed. It was found that SMSI successfully optimized the surface oxygen species and oxygen migration ability of the catalyst, and then realized the high degree of mineralization of toluene at low temperature. This paper guides the subsequent development of Pt-Mn catalysts for catalytic organic pollutants ozonation with high activity.

Heterogeneous ozonation of ofloxacin using MnOx -CeOx /γ-Al2 O3 as a catalyst: Performances, degradation kinetics and possible degradation pathways

In this study, the performance of ofloxacin (OFX) degradation in synthetic wastewater using synthesized MnO_x -CeO_x /γ-Al₂ O₃ as a heterogeneous ozonation catalyst was evaluated. The removal rates of OFX and chemical oxygen demand (COD) during 15-day continuous-flow experiments were 98.2% and 76.7% on average, respectively. An ozone index (mgCOD/mgO₃ ) of 1.09 with a high ozone utilization efficiency of 91.39% was achieved. The pseudo-first-order rate constant of ofloxacin degradation reached 15.216 × 10^-2  min^-1 , which was five times that (3.085 × 10^-2  min^-1 ) without catalysts. The results of gas chromatography-mass spectrometry (GC-MS) demonstrated that a variety of small-molecule organics occurred in the final oxidation products, such as 4-hydroxyl-4-methyl-2-pentanone and 2-oxoadipic acid in addition to homologs of OFX. The results of this study suggested that hydroxyl radicals played critical roles in the degradation and mineralization of OFX via four main pathways: (a) electrophilic addition of nitrogen; (b) breakdown of carbon-carbon double bonds; (c) hydrolysis of ether rings; and (d) halodecarboxylation of carboxyl groups. The biodegradability (BOD₅ /COD) of OFX after catalytic ozonation reached 0.54. PRACTITIONER POINTS: Ofloxacin wastewater was treated using catalytic ozonation in a 15-day continuous experiment with MnO_x -CeO_x /γ-Al₂ O₃ as a catalyst. The ozone index reached 1.09 mgCOD/mgO₃ during ozonation of ofloxacin. The presence of the catalyst increased the reaction rate constant by a factor of five. 4-hydroxy-4-methyl-2-pentanone was the primary ofloxacin oxidation product.