Evolution of Mn-Bi2O3 from the Mn-doped Bi3O4Br electro(pre)catalyst during the oxygen evolution reaction

Mn-doped Bi3O4Br has been synthesized using a solvothermal route. The undoped Bi3O4Br and Mn-Bi3O4Br materials possess orthorhombic unit cells with two distinct Bi sites forming a layered atomic arrangement. The shift in the (020) plane in the powder X-ray diffraction (PXRD) pattern confirms Mn-doping in the Bi3O4Br lattice. Elemental mapping indicated 7% Mn doping in the Bi3O4Br lattice structure. A core-level X-ray photoelectron study (XPS) indicates the presence of BiIII and MnII valence-states in Mn-Bi3O4Br. Doping with a cation (MnII) containing a different charge and ionic radius resulted in vacancy/defects in Mn-Bi3O4Br which further altered its electronic structure by reducing the indirect band gap, beneficial for electron conduction and electrocatalysis. The irreversible MnII to MnIII transformation at a potential of 1.48 V (vs. RHE) precedes the electrochemical oxygen evolution reaction (OER). The Mn-doped electrocatalyst achieved 10 mA cm-2 current density at 337 mV overpotential, while the pristine Bi3O4Br required 385 mV overpotential to reach the same activity. The pronounced OER activity of the Mn-Bi3O4Br sample over the pristine Bi3O4Br highlights the necessity of MnII doping. The superior activity of the Mn-Bi3O4Br catalyst over that of Bi3O4Br is due to a low Tafel slope, better double-layer capacitance (Cdl), and small charge-transfer resistance (Rct). The chronoamperometry (CA) study depicts long-term stability for 12 h at 20 mA cm-2. An electrolyzer fabricated as Pt(-)/(+)Mn-Bi3O4Br can deliver 10 mA cm-2 at a cell potential of 2.05 V. The post-CA-OER analyses of the anode confirmed the leaching of [Br-] followed by in situ formation of Mn-doped Bi2O3 as the electrocatalytically active species. Herein, an ultra-low Mn-doping into Bi3O4Br leads to an improvement in the electrocatalytic performance of the inactive Bi3O4Br material.

Comprehensive Insights into the Family of Atomically Thin 2D-Materials for Diverse Photocatalytic Applications

2D materials with their fascinating physiochemical, structural, and electronic properties have attracted researchers and have been used for a variety of applications such as electrocatalysis, photocatalysis, energy storage, magnetoresistance, and sensing. In recent times, 2D materials have gained great momentum in the spectrum of photocatalytic applications such as pollutant degradation, water splitting, CO2 reduction, NH3 production, microbial disinfection, and heavy metal reduction, thanks to their superior properties including visible light responsive band gap, improved charge separation and electron mobility, suppressed charge recombination and high surface reactive sites, and thus enhance the photocatalytic properties rationally as compared to 3D and other low-dimensional materials. In this context, this review spot-lights the family of various 2D materials, their properties and their 2D structure-induced photocatalytic mechanisms while giving an overview on their synthesis methods along with a detailed discussion on their diverse photocatalytic applications. Furthermore, the challenges and the future opportunities are also presented related to the future developments and advancements of 2D materials for the large-scale real-time photocatalytic applications.

Construction of S-Scheme CuS/Bi5O7I Heterojunction for Boosted Photocatalytic Disinfection with Visible Light Exposure

In this paper, a novel S-scheme CuS/Bi5O7I heterojunction was successfully constructed using a two-step approach comprising the alkaline hydrothermal method and the adsorption–deposition method, and it consisted of Bi5O7I microrods with CuS particles covering the surface. The photocatalytic antibacterial effects on Escherichia coli (E. coli) were systematically examined with visible light exposure. The results suggested that the 3%-CuS/Bi5O7I composite showed the optimal antibacterial activity, completely inactivating E. coli (5 × 108 cfu/mL) in 180 min of irradiation. Moreover, the bacterial inactivation process was scientifically described. •O2− and h+ were the major active species for the inactivation of the bacteria. In the early stages, SOD and CAT initiated the protection system to avoid the oxidative destruction of the active species. Unfortunately, the antioxidant protection system was overwhelmed thereafter, which led to the destruction of the cell membrane, as evidenced by the microstructure changes in E. coli cells. Subsequently, the leakage of intracellular components including K+, proteins, and DNA resulted in the unavoidable death of E. coli. Due to the construction of the S-scheme heterojunction, the CuS/Bi5O7I composite displayed the boosted visible light harvesting, the high-efficiency separation of photogenerated electrons and holes, and a great redox capacity, contributing to an outstanding photocatalytic disinfection performance. This work offers a new opportunity for S-scheme Bi5O7I-based heterojunctions with potential application in water disinfection.

Iron doped BiOBr loaded on carbon spheres for improved visible-light-driven detoxification of 2-chloroethyl sulfide

In this study, flower-like porous iron doped bismuth oxybromide on porous activated carbon visible light catalysts (BiOBr/Fe@AC) were prepared by a reactive imidazole ionic liquid surfactant assisted solvothermal process. The morphologies, structures, optical properties and photocatalytic properties were investigated in detail. The morphology of the synthesized Fe doped BiOBr composites gradually changed from a regular spherical shape to a non-specific shape with the increase of the alkyl chain length of the ionic liquid surfactants. The photocurrent of BiOBr/Fe@AC composites is greatly influenced by the content of Fe, the type of carbon sphere and the size of the composites. The photocatalytic activity of the obtained BiOBr/Fe@AC composites was evaluated by the degradation of 2-chloroethyl sulfide (CEES) under visible light. The BiOBr/Fe@AC composites exhibited significantly enhanced photocatalytic performance compared to that of pure BiOBr and the 10.0% Fe doped BiOBr/Fe@AC composite displayed the highest photocatalytic activity. The main active species were determined to be holes and superoxide radicals by electron spin resonance (ESR) analysis and free radical trapping experiments. The introduction of iron can improve the separation and transfer rate of photoinduced charges. Carbon spheres can enhance light harvesting, improve electron transfer and increase the number of catalytic active sites. Iron and carbon embellishment is an effective strategy to enhance the photocatalytic efficiency of BiOBr. Finally, a possible photocatalytic mechanism of BiOBr/Fe@AC has been proposed.

Enhanced photocatalytic degradation of bisphenol A by magnetically separable bismuth oxyiodide magnetite nanocomposites under solar light irradiation

Bismuth oxyiodide/magnetite (BiOI/Fe₃O₄) nanocomposites were synthesized by a hydrothermal reaction. The synthesized BiOI/Fe₃O₄ was used to remove bisphenol A (BPA) from an aqueous solution under simulated solar light. The molar ratio of Bi to Fe in BiOI/Fe₃O₄ significantly affected BPA degradation, with the optimal BiOI/Fe₃O₄ (2:1) ratio in the composites. Optimum operating conditions such as a catalyst dosage of 1.0 g/L, an initial BPA concentration of 10 mg/L, and pH 7 gave a complete degradation of completely removed BPA within 30 min. The primary reactive oxygen species were verified as superoxide radicals and holes in oxidative species experiments. The magnetic BiOI/Fe₃O₄ could be easily collected from an aqueous solution by an external magnet, and its reusability was successfully demonstrated through recycling experiments. Furthermore, the derivatives in BiOI/Fe₃O₄ photocatalytic reactions were investigated, and a possible BPA degradation pathway was proposed. These results show that BiOI/Fe₃O₄ nanocomposites have great potential for BPA removal from water and wastewater treatment systems.

Recent advancement in Bi5O7I-based nanocomposites for high performance photocatalysts

Bi₅O₇I belongs to the family of bismuth oxyhalides (BiOX, X = Cl, Br, I), having a unique layered structure with an internal electrostatic field that promotes the separation and transfer of photo-generated charge carriers. Interestingly, Bi₅O₇I exhibits higher thermal stability compared to its other BiOX member compounds and absorption spectrum extended to the visible region. Bi₅O₇I has demonstrated applications in diverse fields such as photocatalytic degradation of various organic pollutants, marine antifouling, etc. Unfortunately, owing to its wide band gap of ∼2.9 eV, its absorption lies mainly in the ultraviolet region, and a tiny portion of absorption lies in the visible region. Due to limited absorption, the photocatalytic performance of pure Bi₅O₇I is still facing challenges. In order to reduce the band gap and increase the light absorption capability of Bi₅O₇I, doping and formation of heterostructure strategies have been employed, which showed promising results in the photocatalytic performance. In addition, the plasmonic heterostructures of Bi₅O₇I were also developed to further boost the efficiency of Bi₅O₇I as a photocatalyst. Here, in this review article, we present such recent efforts made for the advanced development of Bi₅O₇I regarding its synthesis, properties and applications. The strategies for photocatalytic performance enhancement have been discussed in detail. Moreover, in the conclusion section, we have presented the current challenges and discussed possible prospective developments in this field.

Ionic liquid-assisted fabrication of metal-organic framework-derived indium oxide/bismuth oxyiodide p-n junction photocatalysts for robust photocatalysis against phenolic pollutants

Constructing a p-n heterojunction is a feasible strategy to manipulate the dynamic behaviors of photogenerated carriers through an internal electric field. Herein, a novel highly efficient indium oxide/bismuth oxyiodide (In₂O₃/BiOI) p-n junction photocatalyst was fabricated using a facile ionic liquid-assisted precipitation method for the first time. The morphologies were modified by adding different amounts of acetic acid solution. Their hierarchical architecture was beneficial for adsorbing contaminants in wastewater, while the in-situ formed p-n heterojunction between BiOI and In₂O₃ facilitated interfacial charge transfer and improved the quantum efficiency. Their visible light-responsive photocatalytic activities were systematically investigated by photocatalytic o-phenylphenol (OPP) and 4-tert-butylphenol (PTBP) oxidation. The degradation rate of OPP over In₂O₃/BiOI-2 was up to 5.67 times higher than that for BiOI. The excellent activity of In₂O₃/BiOI should be attributed to the rapid interfacial charge transfer, depressed carrier recombination, and proper band potentials. Trapping experiments and electron paramagnetic resonance characterizations confirmed the generation of hydroxyl radicals (•OH) and superoxide radicals (•O₂^-), which have played a key role in decomposing pollutants. The intermediate products generated during the photocatalytic degradation of OPP were detected and identified by liquid chromatography-mass spectrometry. Meanwhile, their possible molecular structures and degradation pathways have also been inferred.

Oxygen vacancy and p–n heterojunction in a g-C3N4 nanosheet/CuFeO2 nanocomposite for enhanced photocatalytic N2 fixation to NH3 under ambient conditions

In this article, the nitrogen fixation process over g-C3N4 nanosheets/CuFeO2 p–n heterojunction photocatalyst is presented.

Fabrication of Er3+/Yb3+ Co-Doped Bi5O7I Microsphere With Upconversion Luminescence and Enhanced Photocatalytic Activity for Bisphenol A Degradation

Er3+/Yb3+ co-doped Bi5O7I uniform porous microsphere photocatalysts were synthesized by a two-step chemical method, which possesses excellent photocatalytic performance and upconversion luminescence property. The photocatalytic performance of the photocatalysts was studied by degradation of bisphenol A in aqueous solution under visible light and different monochromatic light irradiation. The photocatalytic performance of Er3+/Yb3+ co-doped Bi5O7I sample is better than that of the pristine Bi5O7I and Er3+-doped Bi5O7I samples. Moreover, Er3+/Yb3+ co-doped Bi5O7I possesses photocatalytic ability with a red light monochromatic LED lamp (3 W, λ = 630 nm) and an infrared monochromatic LED lamp (100 W, λ = 940 nm) irradiation whose wavelength is longer than the absorption-limiting wavelength of pristine Bi5O7I sample. This phenomenon further verified that the upconversion property of Er3+ and Yb3+ causes the improved photocatalytic efficiency of Er3+/Yb3+ co-doped Bi5O7I sample.