Tautomeric and conformational switching in a new versatile N-rich heterocyclic ligand

Dithiocarbamate-based novel anti-histaminic agents: synthesis, characterization, crystal structure and thermal study

A new N-(4-fluorobenzyl) N-(pyridin-2-ylmethyl) dithiocarbamate ligand (fbpm) having structural similarity to clinically approved antihistaminic drugs (viz. pheniramine, chlorpheniramine, and brompheniramine) and its four metal complexes [Co(fbpm)3] (1), [Ni(fbpm)2] (2), [Cu(fbpm)2] (3), and [Zn(fbpm)2] (4) were successfully synthesized and characterized by various techniques i.e. elemental analysis, FT-IR spectroscopy, HR-MS, NMR spectroscopy, and absorption and emission spectroscopy. Furthermore, complexes 1 and 2 were characterized by single crystal X-ray diffraction. Complex 1 adopts distorted octahedral geometry around the Co(III) center while complex 2 adopts distorted square planar geometry around the Zn(II) center. X-ray data also showed various weak intermolecular C-H⋯F and C-H⋯N hydrogen bonding interactions leading to supramolecular architectures in complexes 1 and 2. The thermal decomposition study of complexes 1-4 analyzed by TGA shows that they are thermally stable up to 150 °C and also gives strong evidence for the formation of respective metal sulfides at higher temperatures. The antihistaminic activity of the ligand (fbpm) and its complexes 1-4 was examined against clonidine and haloperidol-induced catalepsy in Swiss albino mice of either gender in an in vivo animal model. The result shows that these synthesized compounds have antihistaminic potential to inhibit clonidine-induced catalepsy and may be targeted for different allergic conditions. Complex 3 showed maximum reduction in clonidine-induced catalepsy after 180 minutes of treatment when compared with the induced control.

Competitive Intramolecular Hydrogen Bonding: Offering Molecules a Choice

The conformational preferences of N-((6-methylpyridin-2-yl)carbamothioyl)benzamide were studied in solution, the gas phase and the solid state via a combination of NMR, density functional theory (DFT) and single crystal X-ray techniques. This acyl thiourea derivative can adopt two classes of low energy conformation, each stabilized by a different 6-membered intramolecular hydrogen bond (IHB) pseudoring. Analysis in different solvents revealed that the conformational preference of this molecule is polarity dependent, with increasingly polar environments yielding a higher proportion of the minor conformer containing an NH⋅⋅⋅N IHB. The calculated barrier to interconversion is consistent with dynamic behaviour at room temperature, despite the propensity of 6-membered IHB pseudorings to be static. This work demonstrates that introducing competitive IHB pathways can render static IHBs more dynamic and that such systems could have potential as chameleons in drug design.

Elucidating the Polymorphism of Xanthone: A Crystallization and Characterization Study

The aim of this work is to shed light on the polymorphism of xanthones, a class of oxygenated molecules well known for their bioactivity, including antioxidant, anticancer, and anti-inflammatory effects. Understanding the polymorphism of xanthones can enable the design of novel solid products for pharmaceutical, nutraceutical, and agrochemical applications. Prior to this work, two entries accounting for different space groups were deposited for 9-xanthone in the Cambridge Structure Database (CSD): an orthorhombic P212121 and a monoclinic P21 structure solved at room and low temperatures, respectively. However, the very high similarity between these two structures and the lack of clear differences in their physical properties (e.g., thermal behavior) suggested the possibility of the existence of only one crystal structure. In fact, the differences shown in the literature data might be related to the chosen operating parameters, as well as the instrumental resolution of the single-crystal X-ray diffraction experiments. In the work presented here, the ambiguity in the polymorphism of xanthone is investigated using thermal analysis, powder and synchrotron single-crystal XRD, and optical microscopy. Additionally, a workflow for the correct identification of twinned crystal structures, which can be applied to other polymorphic systems, is presented. Such workflow combines the collection of a large data set of high-resolution diffraction patterns using synchrotron radiation with the use of principal component analysis, a dimensionality reduction technique, for a quick and effective identification of phase transitions happening during the data collection. Crystallization experiments were designed to promote the formation of different crystal structures of xanthone that were recrystallized based on past literature and beyond.

Assembly of 1D Helical Energetic Coordination Polymers Using a Flexible Bridged Furazan-triazole Cation

Two new energetic coordination compounds with 1D helical chain structures have been synthesized. First, the polyamine precursor 4,5-diamino-2-((4-amino-1,2,5-oxadiazole-3-yl)methyl)-2,4-dihydro-3H-1,2,4-triazole-3-imino chloride salt (TATAF-Cl) is obtained by incorporating 4-(chloromethyl)-1,2,5-oxadiazol-3-amine with 4H-1,2,4-triazole-3,4,5-triamine. Using a simple hydrothermal method, two energetic complexes, Ag(TATAF)(ClO4)2 (ECP-1) and Ag(TATAF)(NO3)2·H2O (ECP-2), with a helical 1D MOF structure of furazan and triazole were synthesized. Compounds ECP-1 and ECP-2 have relatively high nitrogen and oxygen content (N + O%: 52.04%, 61.04%), excellent crystal density (2.229 g cm-3, 2.116 g cm-3 at 298 K) and high heat of detonation (1.18 kcal g-1, 1.06 kcal g-1), good detonation performance (P: 35.34 GPa, 29.52 GPa; Dv: 8412 m s-1, 7794 m s-1), and moderate sensitivity (IS: 8 J, 13 J; FS: 72 N, 64 N). Structurally, the Ag+ of the two ECPs is coordinated with two energetic cations, two perchlorates, or one nitrate via tetragonal coordination to form a single helical structure that is interspersed up and down in two directions.

Controlling the Energetic Properties of N-Methylene-C-Linked 4-Hydroxy-3,5-dinitropyrazole- and Tetrazole-Based Compounds via a Selective Mono- and Dicationic Salt Formation Strategy

In the quest to synthesize high-performing insensitive high-energy density materials (HEDMs), the main challenge is establishing an equilibrium between energy and stability. For this purpose, we explored 4-hydroxy-3,5-dinitropyrazole- and tetrazole-based energetic scaffolds connected via a N-methylene-C bridge. The hydroxy functionality between nitro groups on the pyrazole ring promotes physical stability via inter- and intramolecular hydrogen bonding and contributes to oxygen balance, supporting better energetic performance. Due to two acidic sites (OH and NH) with different reactivities, a series of monocationic and dicationic salts were synthesized, and their overall performance was compared. All compounds synthesized in this study have high physical stability with impact sensitivity >40 J and friction sensitivity >360 N. Monocationic salts were generally found to have better thermal stability with respect to their corresponding dicationic energetic salts, which showed better energetic performance. The salt formation strategy effectively improved the thermal stability of 2 (Td = 168 °C), where most energetic salts have decomposition temperatures higher than 220 °C. All of the compounds were characterized through IR, multinuclear NMR spectroscopy, high-resolution mass spectrometry (HRMS), and elemental analysis. The structure-property relationship was studied using Hirshfeld surface analysis, noncovalent interaction (NCI) analysis, and electrostatic potential studies.

Protein-Targeting Drug Discovery

Protein-driven biological processes play a fundamental role in biomedicine because they are related to pathologies of enormous social impact, such as cancer, neuropathies, and viral diseases, including the one at the origin of the recent COVID-19 pandemic [...].

High-Energy-Density Materials: An Amphoteric N-Rich Bis(triazole) and Salts of Its Cationic and Anionic Species

The synthesis and characterization of the N-rich bis(triazole) compound 1H,4′H-[3,3′-bis(1,2,4-triazole)]-4′,5,5′-triamine (C₄H₇N₉) with a N content of 69.6% by weight is reported. The compound exhibits a rich acid–base behavior because it can accept up to two protons, forming a monocation and a dication, and can lose one proton, forming an anion. Measurement of the acid constants has shown that there exist well-defined pH intervals in which each of the four species is predominant in solution, opening the way to their isolation and characterization by single-crystal X-ray analysis as salts with different counterions. Some energetic salts of the monocation or dication containing oxidizing inorganic counterions (dinitramide, perchlorate, and nitrate) were also prepared and characterized in the solid state for their sensitivity. In particular, the neutral compound shows a very remarkable thermal stability in air, with T_d = 347 °C, and is insensitive to impact and friction. Salts of the dication with energetic counterions, in particular perchlorate and nitrate, show increased sensitivities and reduced thermal stability. The salt of the monocation with dinitramide as the counterion outperforms other dinitramide salts reported in the literature because of its higher thermal stability (T_d = 230 °C in air) and friction insensitiveness.

An energetic, N-rich compound that, depending on the pH, can exist as neutral, singly protonated, doubly protonated, and deprotonated species is shown.

Stabilization of an elusive tautomer by metal coordination

The solid-state isolation of the different tautomers of a chemical compound can be a challenging problem. In many cases, tautomers with an energy very close to the most stable one cannot be isolated (elusive tautomers). In this article, with reference to the 4-methyl-7-(pyrazin-2-yl)-2H-[1,2,4]triazolo[3,2-c][1,2,4]triazole ligand, for which the elusive 3H-tautomer has an energy only 1.4 kcal mol-1 greater than the most stable 2H form, we show that metal complexation is a successful and reliable way for stabilizing the elusive tautomer. We have prepared two complexes of the neutral ligand with CuBr2 and ZnBr2, namely, aquabromidobis[4-methyl-7-(pyrazin-2-yl)-3H-[1,2,4]triazolo[3,2-c][1,2,4]triazole]copper(II) bromide trihydrate, [CuBr(C8H7N7)2(H2O)]Br·3H2O, and dibromido[4-methyl-7-(pyrazin-2-yl)-2H-[1,2,4]triazolo[3,2-c][1,2,4]triazole][4-methyl-7-(pyrazin-2-yl)-3H-[1,2,4]triazolo[3,2-c][1,2,4]triazole]zinc(II) monohydrate, [ZnBr2(C8H7N7)2]·H2O. The X-ray analysis shows that, in both cases, the elusive 3H-tautomer is present. The results of the crystallographic analysis of the two complexes reflect the different coordination preferences of CuII and ZnII. The copper(II) complex is homotautomeric as it only contains the elusive 3H-tautomer of the ligand. The complex can be described as octahedral with tetragonal distortion. Two 3H-triazolotriazole ligands are bis-chelated in the equatorial plane, while a water molecule and a bromide ion in elongated axial positions complete the coordination environment. The zinc(II) complex, on the other hand, is heterotautomeric and contains two bromide ions and two monodentate ligand molecules, one in the 2H-tautomeric form and the other in the 3H-tautomeric form, both coordinated to the metal in tetrahedral geometry. The observation of mixed-tautomer complexes is unprecedented for neutral ligands. The analysis of the X-ray molecular structures of the two complexes allows the deduction of possible rules for a rational design of mixed-tautomer complexes.