Pt nanoparticles on Ti3C2Tx-based MXenes as efficient catalysts for the selective hydrogenation of nitroaromatic compounds to amines

Photo-thermal Catalytic Hydrogenation of Halogenated Nitrobenzenes over Ni/P25 Catalyst

As haloanilines (HANs) are important organic intermediates and fine chemicals, their preparation over non-noble-metal-based catalysts by catalytic hydrogenation has attracted wide attention. However, the reaction suffers from relatively harsh conditions. Herein, we found that a 3.5%Ni/P25 catalyst exhibited superior photo-thermal catalytic activity with a TOFs of 5207 h-1 for hydrogenation of p-chloronitrobenzene (p-CNB) to p-chloroaniline under a 300 W full spectrum, which was much higher than that of photo- and thermal catalysis alone. Moreover, the 3.5%Ni/P25 catalyst could be recycled 4 times and was effective for the hydrogenation of various halonitrobenzenes (HNBs) with superior selectivity. Furthermore, the kinetic research showed that the excellent catalytic performance could be attributed to the better activation and dissociation of H2 by photo-thermal catalysis and the hydrogenation of p-CNB obeyed the condensation routine by ionic hydrogenation over 3.5%Ni/P25.

Enhanced Stability and Catalytic Activity of a Nanocatalyst with Reusable Ionic Liquid Hydrogels for the Reduction of Organic Pollutants

Nitroaromatic compounds have a wide range of applications. However, they pose a significant threat to both the environment and human health. Ionic liquid hydrogels (ILs-gels) have emerged as a cost-effective and environmentally friendly option for various applications. However, conventional ILs-gels are known to possess mechanical flaws or defects. The procedure utilized a facile synthesis route that involved the polymerization of acrylamide (AM) and ionic liquids (ILs) to create a novel candidate for nanoparticle absorption. This study resolved this issue by creating toughened hydrophobic combined hydrogels synthesized through the addition of SiO2@poly(butyl acrylate) core-shell inorganic-organic hybrid latex particles (SiO2@PBA) to the AM-ILs mixture. The SiO2@PBA particles were chosen to provide the hydrogels with exceptional stretchability (up to 4050% strain) and high mechanical properties (tensile strength of 126 kPa) by acting as both a nanotoughener and a cross-linking point for hydrophobic linkage. Additionally, the P(AM/ILs)-SiO2@PBA hydrogel served as a template for the in situ and stable formation of palladium (Pd) nanoparticles. By incorporation of these Pd nanoparticles as catalysts into P(AM/ILs)-SiO2@PBA hydrogel carriers, the resulting P(AM/ILs)-SiO2@PBA/Pd hydrogels exhibited the ability to catalyze the degradation of p-nitrophenol. Remarkably, even after 15 applications, the efficiency of the degradation process remained consistently above 90%. Thus, the innovative SiO2@PBA toughened ILs-hydrogel design strategy can be utilized to develop robust and stretchable hydrogel materials for catalytic use in the sewage disposal industry.

Deoxygenative Hydroboration of Aromatic Nitro Compounds Catalyzed by Tetra(diisopropylamido) Rare-Earth Metal-Lithium Bimetallic Complexes

The first example of the reduction of a nitro compound with HBPin catalyzed by tetra(diisopropylamido) rare-earth metal-lithium bimetallic complexes LiRE(NiPr2)4(THF) (RE = La, Nd, Sm, Gd, and Y) was disclosed. A series of aromatic nitro compounds were reduced to N-borylamines in high yields (up to 99%). The derivatives of N-borylamines─amides and carbamates─were obtained in a sequential one-pot manner. Furthermore, kinetic studies of the deoxygenative hydroboration of nitro compounds were carried out.

Recent catalytic applications of MXene-based layered nanomaterials

The urgent issues related to the catalytic processes and energy applications have accelerated the development of hybrid and smart materials. MXenes are a new family of atomic layered nanostructured materials that require considerable research. Tailorable morphologies, strong electrical conductivity, great chemical stability, large surface-to-volume ratios, tunable structures, among others are some significant characteristics that make MXenes appropriate for various electrochemical reactions, including dry reforming of methane, hydrogen evolution reaction, methanol oxidation reaction, sulfur reduction reaction, Suzuki-Miyaura coupling reaction, water-gas shift reaction, and so forth. MXenes, on the other hand, have a fundamental drawback of agglomeration, as well as poor long-term recyclability and stability. One possibility for overcoming the restrictions is the fusion of nanosheets or nanoparticles with MXenes. Herein, the relevant literature on the synthesis, catalytic stability and reusability, and applications of several MXene-based nanocatalysts are deliberated including the merits and cons of the newer MXene-based catalysts.

An efficient Pt@MXene platform for the analysis of small-molecule natural products

Small-molecule (m/z<500) natural products have rich biological activity and significant application value thus need to be effectively detected. Surface-assisted laser desorption/ionization mass spectrometry (SALDI MS) has become a powerful detection tool for small-molecule analysis. However, more efficient substrates need to be developed to improve the efficiency of SALDI MS. Thus, platinum nanoparticle-decorated Ti₃C₂ MXene (Pt@MXene) was synthesized in this study as an ideal substrate for SALDI MS in positive ion mode and exhibited excellent performance for the high-throughput detection of small molecules. Compared with using MXene, GO, and CHCA matrix, a stronger signal peak intensity and wider molecular coverage was obtained using Pt@MXene in the detection of small-molecule natural products, with a lower background, excellent salt and protein tolerance, good repeatability, and high detection sensitivity. The Pt@MXene substrate was also successfully used to quantify target molecules in medicinal plants. The proposed method has potentially wide application.

Theoretical Predictions, Experimental Modulation Strategies, and Applications of MXene-Supported Atomically Dispersed Metal Sites

Atomically dispersed metal sites (ADMSs) attract immense attention because they can be used in the fields of energy and environmental protection as they are characterized by high atomic utilization efficiency and exhibit high activity. Various supports for anchoring isolated metal atoms are developed to construct ADMSs characterized by highly stable and well-defined structures. This can be achieved by increasing the number of anchoring sites and reinforcing metal-support interactions. MXenes, a new series of 2D nanomaterials, exhibit promising potential in stabilizing isolated metal atoms because of their large specific surface areas and unique surface properties. The high conductivity and hydrophilicity of MXenes can be attributed to the nature of surface functionalization and the properties of tunable structures of the materials. Benefiting from these excellent properties, MXenes can find their applications in various fields. Herein, the precise characterization methods that can be followed to study ADMSs, the construction of MXene-supported ADMSs using theoretical predictions, and experimental modulation strategies are summarized, and their corresponding applications in electrocatalysis, organocatalysis, and advanced battery systems are systematically illustrated. It is hoped that this review will provide insights that can be used for the further development of MXene-supported ADMSs.

Ti3C2Tx (MXene)/Pt nanoparticle electrode for the accurate detection of DA coexisting with AA and UA

Dopamine (DA), uric acid (UA) and ascorbic acid (AA) are biomolecules widely distributed in the human body and play an important role in many physiological processes. An abnormal concentration of them is associated with various diseases. Thus, the accurate and fast detection of them has been one of the major demands in the healthcare industry. In this study, we demonstrate that Ti₃C₂T_x/PtNP modified glassy carbon electrodes (GCEs) show a good electrochemical performance in the detection of DA and UA. However, there is no response signal to AA for either the CV or DPV curve due to the electrostatic repulsion between the negatively charged electrode surface and the negatively charged AA. Ti₃C₂T_x(MXene)/Pt nanoparticles (PtNPs) are prepared by etching Ti₃AlC₂(MAX) with HF and reducing H₂PtCl₆ with a NaBH₄ aqueous solution. The morphology of Ti₃C₂T_x/PtNPs is multilayered accordion-like Ti₃C₂T_x decorated with PtNPs with a diameter of 10-20 nm. Furthermore, it is found that the electrochemical detection of DA will be enhanced by AA. The electrochemical detection rule of AA enhanced DA can be expressed as follows: I_(DA+AA) = 0.011216C_AA + 0.039950C_DA + 1.1175(I_(DA+AA) is the peak current of DA coexisting with AA. C_AA is the concentration of AA. C_DA is the concentration of DA). This can be used as a calibration to correct the concentration of DA when AA and DA coexist. Notably, AA promotes the stability of the electrode because it cleans the oxidation products from the electrode surface in time. In addition, the sensor exhibits good reproducibility and satisfactory recovery results in a real sample.

Synergistic catalytic hydrolysis of ammonia borane to release hydrogen over AgCo@CN

Synergistic catalytic AB hydrolysis to generate hydrogen was achieved over AgCo@CN synthesized by auto-reduction between Co@CN and a Ag precursor.

Synthesis of SDS-Modified Pt/Ti3C2Tx Nanocomposite Catalysts and Electrochemical Performance for Ethanol Oxidation

It is well-known that platinum (Pt) is still the preferred material of anode catalyst in ethanol oxidation, however, the prohibitive high cost and CO poisoning of Pt metal impede the commercialization of fuel cells. Therefore, improving the utilization rate of catalysts and reduce the cost of catalyst become one of the most concerned focus in the construction of fuel cells. In this work, the Pt-based catalysts are synthesized by using different content of sodium dodecyl sulfate (SDS) modified-Ti₃C₂T_x support, and the dispersion regulation function of SDS modified-Ti₃C₂T_x supported on Pt nanoparticles is investigated. The structure, composition and morphology of different catalysts are characterized by X-ray diffraction (XRD), X-ray spectroscopy (EDX), transmission electron microscopy (TEM) and high-resolution TEM, respectively. It is found that the Pt nanoparticles in pure Ti₃C₂T_x surface are serious aggregated and show poor dispersion, whereas the Pt nanoparticles in SDS modified-Ti₃C₂T_x have a better dispersion. The electrochemical results revealed that SDS modified-Ti₃C₂T_x supported Pt nanoparticles has higher electrocatalytic activity and stability in both acidic and alkaline ethanol oxidation when the dosage of SDS increases to 100 mg. These findings indicate that the SDS-Ti₃C₂T_x/Pt catalysts show a promising future of potential applications in fuel cells with modification of Ti₃C₂T_x support.