Influence of the particle size and hydrocolloid type on lipid digestion of thickened emulsions

Pre-exposure of Lactobacillus acidophilus to stress conditions impacts the metabolites and bioaccessibility of calcium and carotenoids in fermented dairy products

This study evaluated the impact of fermentation with Lactobacillus acidophilus pre-subjected to acid, osmotic, and oxidative stress conditions on the production of metabolites and the bioaccessibility of nutrients and bioactive compounds in fermented milks and yogurts. The products were added with orange bagasse (additional calcium - Ca source) and buriti pulp (carotenoids source). Gas chromatography coupled with mass spectrometry (GC-MS) and nuclear magnetic resonance (NMR) were used to analyze the volatile and non-volatile compounds metabolites from fermentation, respectively. In vitro digestion assays (dialysis and micellization) evaluated the bioaccessibility of Ca and carotenoids. Results showed that fermentation with L. acidophilus, previously exposed to acid, osmotic, and oxidative stress conditions, increased the production of volatiles such as higher alcohols and compounds derived from amino acid catabolism (1-butanol, 1-decanol, 1-nonanol, nonanoic acid, 2-ethyl 1-hexanol, 1-methoxy-2-propanol). Also, when this microorganism was subjected to osmotic and oxidative stress, an increase in the bioaccessibility of Ca in natural fermented milks from 4.1 % to 13.3-15.5 % and in the same products fortified with orange bagasse from 5.3 % to 9.3-10.8 % (when compared to the non-stressed condition) were observed. Conversely, the use of L. acidophilus - non-stressed or subjected to oxidative stress - reduced the bioaccessibility of carotenoids in products containing buriti pulp from 9.6 % to 7.8 % and 4.1  % (in yogurts); and, from 4.1 % to 2.0 % (in fermented milks), when compared to control. Thus, the pre-exposure of probiotics to stress conditions may impact not only the sensory and biochemical characteristics of fermented products, but also the bioaccessibility of nutrients and bioactive compounds.

Construction and microencapsulation of tea polyphenols W1/O/W2 double emulsion based on modified gluten (MEG)

The objective of this study was to solve instability and low bioavailability of tea polyphenols (TPs), and to explore the application of gluten protein as microcapsule wall material. Modified gluten protein (MEG), β-cyclodextrin (β-CD), xanthan gum (XG) or acacia gum (GA) were used as composite wall materials to encapsulate TPs by double-emulsion technique, and the physicochemical and structural properties of the products were characterized. The results show that the composite wall material effectively encapsulated and enhanced the stability of TPs. CLSM imaging and in vitro digestion simulation further validated the structural integrity in gastric conditions and controlled release properties of microcapsules. When the composite wall materials was MEG:β-CD (2:1)-XG, the superior bioavailability of TPs was 60.35 %. This study provides a preparation method of TPs microcapsules and composite wall materials, which will contribute to the stability and bioavailability of polyphenols and the expansion of the application of gluten.

Antifungal, Antioxidant, and Irritative Potential of Citronella Oil (Cymbopogon nardus) Associated with Phenethyl Ester of Caffeic Acid (CAPE)

The present study aimed to analyze the antifungal, antioxidant, and irritant potential of citronella oil, both isolated and combined with caffeic acid phenethyl ester (CAPE), for topical oral candidiasis. The antioxidant potential was evaluated using two methods, the DPPH test and the reducing power test (FRAP), while the irritant potential of the solutions was assessed through the hen’s egg chorioallantoic membrane test (HET-CAM). The DPPH test (IC50) values for the CITRO III + CAPE III combination were 32 ± 9 mg/mL, and for isolated CAPE, 13 ± 3 mg/mL. The results from the FRAP method revealed a low iron-reducing power for the combination of 1.25 mg/mL of citronella and 0.0775 mg/mL of CAPE (CITRO III + CAPE III), showing no significant difference compared to the isolated solution of 0.15 mg/mL of CAPE. The antibacterial activity of CAPE and isolated citronella in vitro against microorganisms was evaluated using two methods: microdilution and biofilm assay. The results showed that the MIC and MFC values were 0.5 mg/mL for citronella at both tested times (24 h and 48 h). For CAPE, the MFC values were 0.031 mg/mL. For the biofilm assay, the isolated compounds and combinations at 1 min and 6 h showed significantly different results from the controls (p < 0.05). Furthermore, the HET-CAM results demonstrated the absence of irritability. Based on these premises, the antifungal and antioxidant actions, and absence of irritability were proven. Moreover, this work presents a natural antifungal of interest to the pharmaceutical industry.

Inhibitory effects of nobiletin-mediated interfacial instability of bile salt emulsified oil droplets on lipid digestion

Previous lipase inhibitors studies mainly focus on the binding between inhibitors and lipase, ignoring the impact of inhibitors on the oil-water interface of lipid droplets. This study aimed to investigate the effect of nobiletin (NBT) from Citri Reticulatae Pericarpium on the oil-water interface properties and lipid digestion. Here, we found that NBT could destroy bile salt (BS)-stabilized lipid droplets and thus inhibited free fatty acid release, owing to the interaction between NBT and BS at the oil-water interface, and reducing the stability of the oil-water interface (the stability index decreased from 91.15 ± 2.6 % to 66.5 ± 3.6 %). Further, the molecular dynamics simulation and isothermal titration calorimetry revealed that NBT could combine with BS at oil-water interface through intermolecular interactions, including hydrogen bonds, Van der Waals force, and steric hindrance. These results suggest that the interfacial instability of NBT mediated BS emulsified oil droplets may be another pathway to inhibit lipid digestion.

Desserts Enriched with a Nanoemulsion Loaded with Vitamin D3 and Omega-3 Fatty Acids for Older People

The food industry is challenged to develop nutritious and palatable foods that satisfy older people's needs. So, this work aimed to study the incorporation of nanoemulsions enriched with vitamin D3 and omega-3 fatty acids into two desserts (yogurt and fruit puree), characterizing their nutritional profile, viscosity, and color properties and evaluating their in vitro bioaccessibility and sensory response. The results showed that adding nanoemulsion modified the nutrition profile of desserts due to increasing lipids and calories. The desserts' physical properties were also affected, with a decrease in viscosity and a lightening of color. Regarding digestion, the enriched desserts presented a low release of free fatty acids (14.8 and 11.4%, respectively). However, fruit puree showed the highest vitamin D3 and omega-3 fatty acid in vitro bioaccessibility (48.9 and 70.9%, respectively). In addition, older consumers found this dessert more acceptable than yogurt due to the adequate intensity of its sensory attributes (aroma, flavor, sweetness, and consistency). Therefore, the fruit puree can be enriched with nanoemulsions loaded with vitamin D3 and omega-3 fatty acids to improve the bioaccessibility of lipid bioactive compounds and sensory performance, offering a health-enhancing option for older consumers.

Construction of various lipid carriers to study the transdermal penetration mechanism of sinomenine hydrochloride

OBJECTIVE

To investigate the transdermal mechanisms and compare the differences in transdermal delivery of Sinomenine hydrochloride (SN) between solid lipid nanoparticles (SLN), liposomes (LS), and nanoemulsions (NE).

METHODS

SN-SLN, SN-LS and SN-NE were prepared by ultrasound, ethanol injection and spontaneous emulsification, respectively. FTIR, DSC, in vitro skin penetration, activation energy (Ea) analysis were used to explore the mechanism of drug penetration across the skin.

RESULTS

The particle size and encapsulation efficiency were 126.60 nm, 43.23 ± 0.48%(w/w) for SN-SLN, 224.90 nm, 78.31 ± 0.75%(w/w) for SN-LS, and 83.22 nm, 89.01 ± 2.16%(w/w) for SN-LS. FTIR and DSC showed the preparations had various levels of impacts on the stratum corneum's lipid structure which was in the order of SLN > NE > LS. Ea values of SN-SLN, SN-LS, and SN-NE crossing the skin were 2.504, 1.161, and 2.510 kcal/mol, respectively.

CONCLUSION

SLN had a greater degree of alteration on the skin cuticle, which allows SN to permeate skin more effectively.

High Internal Phase Emulsions Stabilized with Ultrasound-Modified Spirulina Protein for Curcumin Delivery

Spirulina protein (SP) is recognized as a nutritious edible microbial protein and holds potential as a natural emulsifier. Due to the inherent challenges SP faces in stabilizing high internal phase emulsions (HIPEs), ultrasonic techniques were utilized for modification. Noticeable alterations in the structural and functional properties of SP were observed following ultrasonic treatment at various power levels (0, 100, 300, and 500 W). Ultrasound treatment disrupted non-covalent interactions within the protein polymer structure, leading to the unfolding of molecular structures and the exposure of hydrophobic groups. Importantly, the particle size of SP was reduced the most at an ultrasonic power of 300 W, and the three-phase contact angle reached its peak at 84.3°. The HIPEs stabilized by SP modified with 300 W ultrasonication have high apparent viscosity and modulus values and strong storage stability under different environmental conditions. Additionally, the encapsulation of curcumin in HIPEs led to improved retention of curcumin across various settings. The bioavailability increased to 35.36, which is 2.8 times higher than the pure oil. These findings suggest that ultrasound-modified SP is a promising emulsifier for HIPEs, and is expected to encapsulate hydrophobic nutrients such as curcumin more effectively.

The digestion fates of lipids with different unsaturated levels in people with different age groups

The digestion behavior of lipids plays a crucial role in their nutritional bioaccessibility, which subsequently impacts human health. This study aims to investigate potential variations in lipid digestion profiles among individuals of different ages, considering the distinct physiological functions of the gastrointestinal tract in infants, aging populations, and healthy young adults. The digestion fates of high oleic peanut oil (HOPO), sunflower oil (SO), and linseed oil (LINO) were investigated using in vitro digestion models representing infants, adults, and elders. Comparatively, lipid digestion proved to be more comprehensive in adults, leading to free fatty acid (FFA) levels of 64.53%, 62.32%, and 57.90% for HOPO, SO, and LINO, respectively. Besides, infants demonstrated propensity to selectively release FFAs with shorter chain lengths and higher saturation levels during the digestion. In addition, in the gastric phase, particle sizes among the elderly were consistently larger than those observed in infants and adults, despite adults generating approximately 15% FFAs within the stomach. In summary, this study enhances our fundamental comprehension of how lipids with varying degrees of unsaturation undergo digestion in diverse age groups.

Fatty Acid Release and Gastrointestinal Oxidation Status: Different Methods of Processing Flaxseed

Flaxseed has been recognized as a superfood worldwide due to its abundance of diverse functional phytochemicals and nutrients. Various studies have shown that flaxseed consumption is beneficial to human health, though methods of processing flaxseed may significantly affect the absorption and metabolism of its bioactive components. Hence, flaxseed was subjected to various processing methods including microwaving treatment, microwave-coupled dry milling, microwave-coupled wet milling, and high-pressure homogenization. In vitro digestion experiments were conducted to assess the impact of these processing techniques on the potential gastrointestinal fate of flaxseed oil. Even though more lipids were released by the flaxseed at the beginning of digestion after it was microwaved and dry-milled, the full digestion of flaxseed oil was still restricted in the intestine. In contrast, oil droplets were more evenly distributed in wet-milled flaxseed milk, and there was a greater release of fatty acids during simulated digestion (7.33 ± 0.21 μmol/mL). Interestingly, wet-milled flaxseed milk showed higher oxidative stability compared with flaxseed powder during digestion despite the larger specific surface area of its oil droplets. This study might provide insight into the choice of flaxseed processing technology for better nutrient delivery efficiency.

Plant-Based Oil-in-Water Food Emulsions: Exploring the Influence of Different Formulations on Their Physicochemical Properties

The global focus on incorporating natural ingredients into the diet for health improvement encompasses ω-3 polyunsaturated fatty acids (PUFAs) derived from plant sources, such as flaxseed oil. ω-3 PUFAs are susceptible to oxidation, but oil-in-water (O/W) emulsions can serve to protect PUFAs from this phenomenon. This study aimed to create O/W emulsions using flaxseed oil and either soy lecithin or Quillaja saponins, thickened with modified starch, while assessing their physical properties (oil droplet size, ζ-potential, and rheology) and physical stability. Emulsions with different oil concentrations (25% and 30% w/w) and oil-to-surfactant ratio (5:1 and 10:1) were fabricated using high-pressure homogenization (800 bar, five cycles). Moreover, emulsions were thickened with modified starch and their rheological properties were measured. The physical stability of all emulsions was assessed over a 7-day storage period using the TSI (Turbiscan Stability Index). Saponin-stabilized emulsions exhibited smaller droplet diameters (0.11-0.19 µm) compared to lecithin (0.40-1.30 µm), and an increase in surfactant concentration led to a reduction in droplet diameter. Both surfactants generated droplets with a high negative charge (-63 to -72 mV), but lecithin-stabilized emulsions showed greater negative charge, resulting in more intense electrostatic repulsion. Saponin-stabilized emulsions showed higher apparent viscosity (3.9-11.6 mPa·s) when compared to lecithin-stabilized ones (1.19-4.36 mPa·s). The addition of starch significantly increased the apparent viscosity of saponin-stabilized emulsions, rising from 11.6 mPa s to 2117 mPa s. Emulsions stabilized by saponin exhibited higher stability than those stabilized by lecithin. This study confirms that plant-based ingredients, particularly saponins and lecithin, effectively produce stable O/W emulsions with flaxseed oil, offering opportunities for creating natural ingredient-based food emulsions.

Retrograded octenylsuccinylated maize starch-based emulgels for a promising oral delivery system of curcumin

Emulgels are a type of soft solid delivery system that exploit the merits of both emulsions and gels, namely, bioactive encapsulability and structural stability, respectively. We utilized retrograded/octenylsuccinylated maize starch (ROMS) to fabricate the curcumin-loaded emulgel. Emulgels (oil volume fraction, 0.20) prepared with 1-4 % w/w ROMS exhibited fluid-like behaviors while emulgels with 5-8 % w/w ROMS exhibited a gel-like consistency. Compared to a fluidic emulsion stabilized with 3 % w/w octenylsuccinylated maize starch, the emulgels showed more sustained lipolysis and controlled curcumin release patterns. These results were attributed to rigid ROMS structures at the outer layer of oil droplets, hindering the lipase approach onto the oil/water interface and curcumin diffusion from the interface. Additionally, the bioaccessibility of curcumin in ROMS-stabilized emulgels was enhanced >9.6-fold compared to that of a curcumin solution. Furthermore, emulgels prepared with 8 % w/w ROMS exhibited a high yield stress (376.4 Pa) and maintained appearance and droplet size for 60 days of storage at 4 °C. Consequently, this emulgel has potential as a lipophilic bioactive-containing soft gel with sustained digestion and controlled release properties. Our findings may provide insights into rational delivery system designs.

Modification of the interfacial structure of droplet-stabilised emulsions during in vitro dynamic gastric digestion: Impact on in vitro intestinal lipid digestion

The in-vitro gastrointestinal digestion behaviour of an oil-in-water emulsion with an interface consisting of nano-sized droplets coated with caseinate particles, referred to as a droplet-stabilised emulsion (DSE), was explored using the human gastric simulator and pH-stat models. A caseinate-particle-stabilised emulsion (PSE) was used as a control, with a similar droplet size distribution and the same composition as the DSE. The nanodroplet-stabilised interface of the DSE was preserved during the first 180 min of gastric digestion. During 240 min, the droplet sizes of the DSE and the PSE increased from 22.71 ± 1.14 to 63.34 ± 6.57 μm and from 17.98 ± 1.16 to 85.11 ± 9.35 μm respectively. The small droplet size of the DSE that was released from the gastric phase contributed to slightly higher total free fatty acid (FFA) release (56.18 ± 3.55%) than that from the PSE (49.4 ± 2.67%). The FFA release rate of the DSE (1.21 % min^-1) was greater than that of the PSE (1.06 % min^-1) during the first 30 min of small intestinal digestion; similar FFA release rates (0.5 µmol s^-1 m^-2 × 10^-4) were obtained for both emulsions beyond 30 min of digestion. This study provides new information on lipid digestion using a novel interfacial layer that was stabilised with nanodroplets.

Oral behavior of emulsified systems with different particle size and thickening agents under simulated conditions

Food behavior during oral processing plays an essential role in the perception of texture. It depends on different factors, including food structure and composition, as well as its behavior when interacting with saliva. This study aimed to investigate the effect of particle size and thickener type of emulsified systems on physical, rheological, tribological, and oral oily coating properties under oral conditions. Six matrices based on oil-in-water emulsions with different particle sizes (NE-nanoemulsion and CE-conventional emulsions) were prepared using a mixture of emulsifiers (10% w/w) and sunflower oil (10% w/w). Thickened agents were added to the matrices (NE and CE) at different concentrations (3-4.5% w/w of starch-ST or 0.4-0.8% w/w xanthan gum-XG) to obtain equi-viscous samples (NE-EV) with their CE-based counterpart. Results showed a decrease in apparent viscosity values under oral conditions (saliva and shearing at 10 s^-1) during the shear time, but this behavior was more evident in starch-based matrices. The lubrication properties of the different matrices depended mainly on the thickener concentration since equi-viscous samples (NE-ST-EV and NE-XG-EV) showed higher coefficient of friction (CoF) values. Finally, oral oily coating was more related to the oil droplets size than to the type of thickener since all NE-based matrices showed a higher amount of coating retained compared to the CE-based ones. Therefore, NE-based matrices could be used as an alternative to increase mouthfeel sensations in food emulsions.

Preparation of double-layer nanoemulsions with controlled release of glucose as prevention of hypoglycemia in diabetic patients

Encapsulation systems promote targeted delivery to the gastrointestinal tract. An oil-in-water (O/W) nanoemulsion was covered using new delivery system composition based on zein and sodium alginate. The impact of aqueous phase (distilled water and cooked pumpkin puree), pH (2-4), and zein-alginate concentration solution (0.05-0.20% w/v) was investigated on particle size, zeta potential, incorporation efficiency (IE), stability, viscosity, and glucose release from single-layer (SLN) and double-layer nanoemulsion (DLN). DLNs showed a larger droplet size and zeta potential. The slow gradual release of glucose proved effective application of zein/alginate as delivery system for nanoemulsion. Moreover, cooked pumpkin and 0.12% of zein exhibited more delayed release of glucose than distilled water as an aqueous phase of DLN and as a delivery system respectively. Up-to-49% IE, up-to-50% stability in a period of 7-day storage, and controlled-release glucose for 240 min under in vitro gastrointestinal conditions were obtained in DLN. The results of the current study revealed that SLN covered by zein at 0.12% of concentration can be an ideal delivery system composition for patients with hypoglycemia and clinical problems.

Impact of the Simulated Gastric Digestion Methodology on the In Vitro Intestinal Proteolysis and Lipolysis of Emulsion Gels

The aim of this work was to study the impact of the methodology of in vitro gastric digestion (i.e., in terms of motility exerted and presence of gastric emptying) and gel structure on the degree of intestinal proteolysis and lipolysis of emulsion gels stabilized by whey protein isolate. Emulsions were prepared at pH 4.0 and 7.0 using two homogenization pressures (500 and 1000 bar) and then the emulsions were gelled by heat treatment. These gels were characterized in terms of texture analysis, and then were subjected to one of the following gastric digestion methods: in vitro mechanical gastric system (IMGS) or in vitro gastric digestion in a stirred beaker (SBg). After gastric digestion, the samples were subjected to in vitro intestinal digestion in a stirred beaker (SBi). Hardness, cohesiveness, and chewiness were significantly higher in gels at pH 7.0. The degree of proteolysis was higher in samples digested by IMGS–SBi (7–21%) than SBg–SBi (3–5%), regardless of the gel’s pH. For SBg–SBi, the degree of proteolysis was not affected by pH, but when operating the IMGS, higher hydrolysis values were obtained for gels at pH 7.0 (15–21%) than pH 4.0 (7–13%). Additionally, the percentage of free fatty acids (%FFA) released was reduced by 47.9% in samples digested in the IMGS–SBi. For the methodology SBg–SBi, the %FFA was not affected by the pH, but in the IMGS, higher values were obtained for gels at pH 4.0 (28–30%) than pH 7.0 (15–19%). Our findings demonstrate the importance of choosing representative methods to simulate food digestion in the human gastrointestinal tract and their subsequent impact on nutrient bioaccessibility.