The effect of citral loading and fatty acid distribution on the oleogels: Physicochemical properties and in vitro digestion

Oleogels containing bioactive substances such as citral (CT) are used as functional food ingredients. However, little information is available on the influence of different oleogel network structure caused by CT addition and fatty acid distribution on its digestion behavior. Coconut oil, palm oil, high oleic peanut oil, safflower seed oil, and perilla seed oil were used in this study. The results showed that perilla seed oil-CT-based oleogels had the highest oil-holding capacity (99.03 ± 0.3), whereas CT addition higher than 10 wt% could lead to the morphology collapse of oleogels. Physical and thermodynamic analyses revealed that CT could reduce oleogel hardness and higher unsaturated fatty acid content is more likely to form oleogel with stable and tight crystalline network. Moreover, the dense structure of oleogels hinders the contact between oleogels and lipase, thus weakening triglyceride digestion. These findings provide valuable insights into the design of oleogels loading with CT.

Fabrication, characterization, and in vitro digestion of gelatin/gluten oleogels from thermally crosslinked electrospun short fiber aerogel templates

In this work, the electrospun short fiber-based oleogels (ESFO) were formed by thermal crosslinking. Gelatin and gluten nanofibers were obtained via electrospinning, then homogenized and transformed into short fiber dispersions. Through freeze-drying, electrospun short fiber-based aerogel (ESF-A) templates were obtained for oil adsorption. All ESF-A exhibited the micromorphology of loose fibrous pore structure and prominent changes of characteristic peaks in the thermal and infrared analyses. Moreover, the highly crosslinked templates owned excellent hydrophobicity and mechanical performances (elastic modulus: 0.25 kPa, yield strength: 14.56 kPa, compressive strength: 52.54 kPa, and the final compression recovery: 91.27%). Meanwhile, the oil adsorption/oil holding capacity could reach 76.56 g/g and 80.04%, respectively. Through thermal crosslinking, ESF-O presented good and controllable rheological/in vitro digestion properties, which were further confirmed by PCA analysis. According to different application conditions, ESF-O properties could be adjusted by different degrees of fiber addition or thermal crosslinking.

Formation, characterization, and application of natural bioactive phytosterol-based oleogels: A review

Oleogels are innovative structured fat systems that can replace detrimental lipids and saturated fats. Among the various gelators used to construct oleogels, phytosterols are regarded as potential oleogelators due to ability to lower blood cholesterol levels and protect patients from cardiovascular illnesses, although little research has been conducted on phytosterols. This article examines the formation, characterization, and application of phytosterol-based oleogels in detail. The oleogelation behaviors of phytosterol-based oleogels are affected by their formulation, which includes phytosterol type, combined oleogelator, proportion, concentration and oil type. These oleogels exhibit potential applications as solid fat substitutes without affecting the texture or sensory properties of food products or as effective delivery vehicles. To encourage the research and implementation of phytosterol-based oleogels, we will ultimately not only highlight problems related to their use in food processing, but also provide a few viewpoints, with the goal of providing fresh insights for advancing trends.

Oleogel Systems for Chocolate Production: A Systematic Review

In response to the growing demand for healthier food options, this review explores advances in oleogel systems as an innovative solution to reduce saturated fats in chocolates. Although appreciated for its flavor and texture, chocolate is high in calories, mainly due to cocoa butter (CB), which is rich in saturated fats. Oleogels, three-dimensional structures formed by structuring agents in edible oils, stand out in terms of mimicking saturated fats' physical and sensory properties without compromising the quality of chocolate. This study reviews how oleogels could improve chocolate's stability and sensory quality, exploring the potential of pectin-rich agro-industrial by-products as sustainable alternatives. It also explores the need for physicochemical evaluations of both oleogel and oleogel-based chocolate.

Effect of different gelators on the physicochemical properties and microstructure of coconut oleogels

BACKGROUND

The inherent properties of coconut oil (CO), including its elevated saturated fatty acid content and low melting point, make it suitable for application in plastic fat processing. The present study explores the physicochemical characteristics, micromorphology and oxidative stability of oleogels produced from CO using various gelators [ethylcellulose (EC), β-sitosterol/γ-oryzanol (PS) and glyceryl monostearate (MG)] to elucidate the formation mechanisms of coconut oleogels (EC-COO, PS-COO and MG-COO).

RESULTS

Three oleogel systems exhibited a solid-like behavior, with the formation of crystalline forms dominated by β and β'. Among them, PS-COO exhibited enhanced capability with respect to immobilizing liquid oils, resulting in solidification with high oil-binding capacity, moderate hardness and good elasticity. By contrast, MG-COO demonstrated inferior stability compared to PS-COO and EC-COO. Furthermore, MG-COO and PS-COO demonstrated antioxidant properties against CO oxidation, whereas EC-COO exhibited the opposite effect. PS-COO and EC-COO exhibited superior thermodynamic behavior compared to MG-COO.

CONCLUSION

Three oleogels based on CO were successfully prepared. The mechanical strength, storage modulus and thermodynamic stability of the CO oleogel exhibited concentration dependence with increasing gelling agent addition. PS-COO demonstrated relatively robust oil-binding capacity and oxidative stability, particularly with a 15% PS addition. This information contributes to a deeper understanding of CO-based oleogels and offers theoretical insights for their application in food products. © 2024 Society of Chemical Industry.

Interfacial crystallized oleogel emulsion with improved freeze-thaw stability and tribological properties: Influence of cooling rate

In this study, the influence of cooling rate on the freeze-thaw stability, rheological and tribological properties of interfacial crystalized oleogel emulsion was investigated. Results showed that slower cooling rate could promote formation of larger crystals and stronger network in oleogels. Additionally, oleogel emulsions showed higher freeze-thaw stability than those stabilized solely by emulsifiers. The slower cooling rate resulted in larger crystals adsorbed at the droplet surface. This led to greater steric hindrance that prevented the migration of oil droplets with higher resistance to disruption by ice crystals. The rheological and tribological measurements suggested that with appropriate amount of crystals, the tribological properties were better maintained for emulsions prepared at slow cooling rate after freeze-thaw treatment. This strategy greatly enriched oleogel emulsion formulations and provided important clues for potential applications in food products involved with freeze-thaw treatment.

Controlling release of astaxanthin in β-sitosterol oleogel-based emulsions via different self-assembled mechanisms and composition of the oleogelators

In this study, three types of β-sitosterol-based oleogels (β-sitosterol + γ-oryzanol oleogels, β-sitosterol + lecithin, oleogels and β-sitosterol + monostearate oleogels), loaded with astaxanthin, were employed as the oil phase to create oleogel-based emulsions (SO, SL, and SM) using high-pressure homogenization. The microstructure revealed that fine-scale crystals were dispersed within the oil phase of the droplets in the β-sitosterol oleogel-based emulsion. The bioaccessibility of astaxanthin was found to be 58.13 %, 51.24 %, 36.57 %, and 45.72 % for SM, SL, SO, and the control group, respectively. Interestingly, the release of fatty acids was positively correlated with the availability of astaxanthin (P = 0.981). Further analysis of FFAs release and kinetics indicated that the structural strength of the oil-phase in the emulsions influenced the degree and rate of lipolysis. Additionally, the micellar fraction analysis suggested that the nature and composition of the oleogelators in SM and SL also impacted lipolysis and the bioaccessibility of astaxanthin. Furthermore, interfacial binding of lipase and isothermal titration calorimetry (ITC) measurements revealed that the oleogel network within the oil phase of the emulsion acted as a physical barrier, hindering the interaction between lipase and lipid. Overall, β-sitosterol oleogel-based emulsions offer a versatile platform for delivering hydrophobic molecules, enhancing the bioavailability of active compounds, and achieving sustained release.

4,4-Dimethylsterols Reduces Fat Accumulation via Inhibiting Fatty Acid Amide Hydrolase In Vitro and In Vivo

4,4-Dimethylsterols constitute a unique class of phytosterols responsible for regulating endogenous cannabinoid system (ECS) functions. However, precise mechanism through which 4,4-dimethylsterols affect fat metabolism and the linkage to the ECS remain unresolved. In this study, we identified that 4,4-dimethylsterols, distinct from 4-demethseterols, act as inhibitors of fatty acid amide hydrolases (FAAHs) both in vivo and in vitro. Genetic ablation of FAAHs (faah-1) abolishes the effects of 4,4-dimethylsterols on fat accumulation and locomotion behavior in a Caenorhabditis elegans model. We confirmed that dietary intervention with 4,4-dimethylsterols in a high-fat diet (HFD) mouse model leads to a significant reduction in body weight (>11.28%) with improved lipid profiles in the liver and adipose tissues and increased fecal triacylglycerol excretion. Untargeted and targeted metabolomics further verified that 4,4-dimethylsterols influence unsaturated fatty acid biosynthesis and elevate oleoyl ethanolamine levels in the intestine. We propose a potential molecular mechanism in which 4,4-dimethylsterols engage in binding interactions with the catalytic pocket (Ser241) of FAAH-1 protein due to the shielded polarity, arising from the presence of 2 additional methyl groups (CH3). Consequently, 4,4-dimethylsterols represent an unexplored class of beneficial phytosterols that coordinate with FAAH-1 activity to reduce fat accumulation, which offers new insight into intervention strategies for treating diet-induced obesity.

Oleogel classification, physicochemical characterization methods, and typical cases of application in food: a review

The harmful effects of trans and saturated fatty acids have attracted worldwide attention. Edible oleogels, which can structure liquid oils, are promising healthy alternatives to traditional fats. Active research on oleogels is focused on the interaction between unsaturated oils with different fatty acid compositions and low molecular weight or polymer oleogels. The unique network structure inside oleogels has facilitated their application in candies, spreads, meat, and other products. However, the micro- and macro-properties, as well as the functional properties of oleogels vary by preparation method and the system composition. This review discusses the characteristics of oleogels, serving as a reference for the application of oleogels in food products. Specifically, it (i) classifies oleogels and explains the influence of gelling factors on their gelation, (ii) describes the methods for measuring the physicochemical properties of oleogels, and (iii) discusses the current applications of oleogels in food products.

New Insight into Food-Grade Emulsions: Candelilla Wax-Based Oleogels as an Internal Phase of Novel Vegan Creams

Cream-type emulsions containing candelilla wax-based oleogels (EC) were analyzed for their physicochemical properties compared to palm oil-based creams (EP). The microstructure, rheological behavior, stability, and color of the creams were determined by means of non-invasive and invasive techniques. All the formulations exhibited similar color parameters in CIEL*a*b* space, unimodal-like size distribution of lipid particles, and shear-thinning properties. Oleogel-based formulations were characterized by higher viscosity (consistency index: 172-305 mPa·s, macroscopic viscosity index: 2.19-3.08 × 10-5 nm-2) and elasticity (elasticity index: 1.09-1.45 × 10-3 nm-2), as well as greater resistance to centrifugal force compared to EP. Creams with 3, 4, or 5% wax (EC3-5) showed the lowest polydispersity indexes (PDI: 0.80-0.85) 24 h after production and the lowest instability indexes after environmental temperature changes (heating at 90 °C, or freeze-thaw cycle). EC5 had particularly high microstructural stability. In turn, candelilla wax content ≥ 6% w/w accelerated the destabilization processes of the cream-type emulsions due to disintegration of the interfacial layer by larger lipid crystals. It was found that candelilla wax-based lipids had great potential for use as palm oil substitutes in the development of novel vegan cream analogues.

Bioaccessibility, Intestinal Absorption and Anti-Inflammatory Activity of Curcuminoids Incorporated in Avocado, Sunflower, and Linseed Beeswax Oleogels

Beeswax oleogels (OGs), with a mechanical strength similar to pork backfat, were formulated with avocado (A), sunflower (S), and linseed (L) oils, applying a central composite design plus star point, and were evaluated as oral delivery vehicles of curcuminoids (OGACur, OGSCur, OGLCur). The incorporation of curcumin into the OG matrix significantly delayed both the formation of peroxides and conjugated trienes (K268 values), and the degradation rate of curcumin decreased with the increase of the oil polyunsaturated fatty acids (PUFA) content. The oil structuring did not affect the bioaccessibility of curcuminoids (>55% in all the OGs, regardless of the oil type), but it did reduce the release of fatty acids (~10%) during in vitro gastrointestinal digestion. The intestinal absorption, evaluated in Caco-2 cell monolayers, was higher for the micelle-solubilized curcumin from the digested OG than from unstructured oils, and it showed high anti-inflammatory potential by inhibiting the tumor necrosis factor-α (TNF-α) production compared to the positive control, both before and after the stimulation of ThP-1 cells with LPS. Regardless of the oil type, these beeswax-based OGs with gel-like behavior designed as fat replacers may be promising vehicles for the oral delivery of curcuminoids.

Oleogelation of extra virgin olive oil by different gelators affects lipid digestion and polyphenol bioaccessibility

The possibility to steer extra virgin olive oil (EVOO) digestion and polyphenol bioaccessibility through oleogelation was investigated. EVOO was converted into oleogels using lipophilic (monoglycerides, rice wax, sunflower wax, phytosterols) or hydrophilic (whey protein aerogel particles, WP) gelators. In-vitro digestion demonstrated that the oleogelator nature influenced both lipid digestion and polyphenol bioaccessibility. WP-based oleogels presented ∼100% free fatty acid release compared to ∼64% for unstructured EVOO and ∼40 to ∼55% for lipophilic-based oleogels. This behavior was attributed to the ability of WP to promote micelle formation through oleogel destructuring. Contrarily, the lower lipolysis of EVOO gelled with lipophilic gelators compared to unstructured EVOO suggested that the gelator obstructed lipase accessibility. Tyrosol and hydroxytyrosol bioaccessibility increased for WP oleogels (∼27%), while liposoluble-based oleogels reduced it by 7 to 13%. These findings highlight the deep effect of the gelator choice on the digestion fate of EVOO components in the human body.

Comparison of diosgenin-vegetable oils oleogels with various unsaturated fatty acids: Physicochemical properties, in-vitro digestion, and potential mechanism

This study aimed to evaluate the influence of gelation and unsaturated fatty acids on the reduced extent of lipolysis between diosgenin (DSG)-based oleogels and oils with various unsaturated fatty acids. Overall, the lipolysis of oleogels was significantly lower than oils. The highest reduced extent of lipolysis (46.23 %) was obtained in linseed oleogels (LOG) while sesame oleogels possessed the lowest (21.17 %). It was suggested LOG discovered the strong van der Waals force to induce the robust gel strength and tight cross-linked network and then increase the contact difficulty between lipase and oils. Correlation analysis revealed that C18:3n-3 was positively correlated with hardness and G' while C18:2n-6 was negative. Thus, the effect on the reduced extent of lipolysis with abundant C18:3n-3 was most significant while that rich in C18:2n-6 was least. These discoveries provided a deepening insight into DSG-based oleogels with various unsaturated fatty acids to design desirable properties.

Surfactant-free oleogel-based emulsion stabilized by co-assembled ceramide/lecithin crystals with controlled digestibility

BACKGROUND

There is increasing interest in the development of oleogel-based emulsions. However, they usually contained surfactants for stabilization, especially small-molecular weight surfactants, which may have adverse health impacts.

RESULTS

Herein, a surfactant-free oleogel-based emulsion stabilized by co-assembled ceramide/lecithin (CER/LEC) crystals was developed. The formation and stabilization mechanisms were explored. The different molar ratios of gelator (LEC and CER) in emulsions resulted in different crystal morphology, crystallinity as well as different emulsion properties. This suggested that appropriate crystallinity, crystal size, and interfacial distribution of these crystals provided higher surface coverage against droplets coalescence, thus better emulsion stabilization. Both X-ray diffractograms and contact angle results confirmed that the crystals which were primarily responsible for emulsion stabilization, are co-assembled crystals consisted of both gelators (CER and LEC). Furthermore, the percentage of free fatty acids (FFAs%) results revealed a negative relationship between lipid digestibility and crystal concentration.

CONCLUSIONS

This strategy greatly enriched surfactant-free oleogel-based emulsion formulations, as well as their potential applications in healthy lipid-based products and novel food delivery systems with controlled lipid digestibility. © 2022 Society of Chemical Industry.

Construction of interfacial crystallized oleogel emulsion with improved thermal stability

In this study, we reported a facile strategy to produce an interfacial crystallized oleogel emulsion for improved thermal stability. The interfacial crystallization of ceramide (non-interfacial active oleogelator) was achieved by addition of a surface active compound, which was demonstrated by interfacial rheology tests and polarized light microscopy. For successfully prepared interfacial crystallized emulsions, smaller particle size was observed when the gelator concentration was lower. However, better thermal stability was achieved when oleogelator concentration was higher than 1 wt%. Results from differential scanning calorimetry, X-ray diffraction and Fourier transform infrared spectroscopy suggested that the interfacial adsorption of ceramide was due to its co-crystallization with the emulsifier driven by hydrogen bonds formed by multiple sites. It provided appropriate crystallinity and steric repulsion for oleogel emulsions against oil droplet coalescence during heating process. This strategy greatly enriches oleogel emulsion formulations and their potential applications in food products involved with thermal treatment.

Oleogels as a Fat Substitute in Food: A Current Review

Fats and oils in food give them flavor and texture while promoting satiety. Despite the recommendation to consume predominantly unsaturated lipid sources, its liquid behavior at room temperature makes many industrial applications impossible. Oleogel is a relatively new technology applied as a total or partial replacement for conventional fats directly related to cardiovascular diseases (CVD) and inflammatory processes. Some of the complications in developing oleogels for the food industry are finding structuring agents Generally Recognized as Safe (GRAS), viable economically, and that do not compromise the oleogel palatability; thus, many studies have shown the different possibilities of applications of oleogel in food products. This review presents applied oleogels in foods and recent proposals to circumvent some disadvantages, as reaching consumer demand for healthier products using an easy-to-use and low-cost material can be intriguing for the food industry.

Steering protein and lipid digestibility by oleogelation with protein aerogels

The aim of the present work was to assess the effect of an innovative oleogelation strategy, the aerogel-template approach, on protein and lipid digestibility. Whey protein isolate (WP) was converted into aerogel particles via supercritical CO₂ drying. Oleogels were then prepared by absorption of sunflower (SO) or flaxseed (FLX) oil (80%, w/w) into the aerogel particle template and subjected to in vitro digestion. WP aerogel-templated oleogels showed a specific destructuring behaviour during digestion. Confocal micrographs clearly demonstrated that the original oleogel structure was lost at the gastric level, with the release of oil droplets smaller (D₃₂ < 10 μm) than those observed in the case of the unstructured oils (D₃₂ > 30 μm), stabilised by undigested aerogel proteins. Sodium dodecyl sulphate polyacrylamide gel electrophoresis (SDS-PAGE) and bicinchoninic acid (BCA) assay confirmed that aerogelation reduced the gastric proteolysis of WP from nearly 100% to 70%. The digestion of the SO oleogel led to similar gastric protein digestibility. In contrast, in the case of the FLX oleogel, gastric proteolysis decreased to 40%, suggesting a role of the oil nature in steering WP aerogel digestion. In all cases, upon intestinal digestion aerogel proteins resulted completely hydrolysed. The lipolysis degree of SO (75%) and FLX (34%) oil in the oleogels was higher than that of the unstructured SO (66%) and FLX (24%) oils, due to the larger surface offered by smaller oil droplets to the action of intestinal lipases. This was confirmed by dynamic light scattering, showing a shift towards smaller size in the digestive micelle distribution of oleogels at the end of the intestinal phase. Oleogelation through the WP aerogel-template approach could be regarded as a strategy to steer lipid digestibility while also modulating the release of bioaccessible peptides.

Progress in the Application of Food-Grade Emulsions

The detailed investigation of food-grade emulsions, which possess considerable structural and functional advantages, remains ongoing to enhance our understanding of these dispersion systems and to expand their application scope. This work reviews the applications of food-grade emulsions on the dispersed phase, interface structure, and macroscopic scales; further, it discusses the corresponding factors of influence, the selection and design of food dispersion systems, and the expansion of their application scope. Specifically, applications on the dispersed-phase scale mainly include delivery by soft matter carriers and auxiliary extraction/separation, while applications on the scale of the interface structure involve biphasic systems for enzymatic catalysis and systems that can influence substance digestion/absorption, washing, and disinfection. Future research on these scales should therefore focus on surface-active substances, real interface structure compositions, and the design of interface layers with antioxidant properties. By contrast, applications on the macroscopic scale mainly include the design of soft materials for structured food, in addition to various material applications and other emerging uses. In this case, future research should focus on the interactions between emulsion systems and food ingredients, the effects of food process engineering, safety, nutrition, and metabolism. Considering the ongoing research in this field, we believe that this review will be useful for researchers aiming to explore the applications of food-grade emulsions.

Effect of flaxseed gum on the brittleness of oleogels based on candelilla wax

The present study aimed to decrease the brittleness of flaxseed oleogels based on candelilla wax (CLW) in combination with flaxseed gum (FG). Effects of flaxseed gum concentrations (0–0.4%) on the characteristics of flaxseed oleogels including oil binding capacity, textural, thermal, and rheological properties, and crystal polymorphisms were investigated. Higher concentrations (≥0.2%) of FG significantly decreased the textural parameters (e.g., hardness, fracturability) of oleogels (p < 0.05), suggesting that FG could decrease brittleness. Rheological results indicated that all flaxseed oleogels exhibited solid-like characteristics because the elastic modulus was larger than the viscous modulus. The elastic modulus of flaxseed oleogels presented a maximum value at 0.1% gum concentration. Any increase in gum concentration beyond this concentration decreased the elastic modulus. Increasing FG concentration up to 0.4% decreased the enthalpy of flaxseed oleogels during the melting process. The β′-polymorphic form is an orthorhombic perpendicular (O_⊥) subcell structure. Similar β′ crystal forms were observed among flaxseed oleogels, indicating that FG did not affect them negatively. The study showed that the physical properties of flaxseed oleogels based on CLW could be significantly changed by FG addition. These results provided a deeper comprehension of the novel system, which should be considered a new way to obtain healthy fats with better plasticity for food applications.

Oleogels using candelilla wax as a gelling agent and flaxseed gum as a structural modifier: preparation and characterization.

Conversion of Whey Protein Aerogel Particles into Oleogels: Effect of Oil Type on Structural Features

Protein aerogel particles prepared by supercritical-CO₂-drying (SCD) of ground whey protein (WP) hydrogels (20% w/w, pH 5.7) were converted into oleogels by dispersion in selected edible oils (castor, cod liver, corn, flaxseed, MCT, peanut and sunflower oil). The obtained oleogels were analysed for oil content, microstructure, rheological properties, and ATR-FTIR spectra. Except for castor oil, solid-like, plastic materials with comparable composition (80% oil, 20% WP) and rheological properties (G′~3.5 × 10⁵ Pa, G″~0.20 × 10⁵ Pa, critical stress~800 Pa, tanδ~0.060) were obtained. Optical and confocal microscopy showed that the generated structure was associated with the capillary-driven absorption of oil into the porous aerogel particles interconnected via particle-particle interactions. In this structure, the oil was stably entrapped. Results evidenced the reduced role of edible oil characteristics with the exception of castor oil, whose high polarity probably favoured particle–oil interactions hindering particle networking. This work demonstrates that WP aerogels could be regarded as versatile oleogel templates allowing the structuring of many edible oils into solid-like materials.

Structured edible lipid-based particle systems for oral drug-delivery

Oral administration is the most popular and patient-compliant route for drug delivery, though it raises great challenges due to the involvement of the gastro-intestine (GI) system and the drug bioavailability. Drug bioavailability is directly related to its ability to dissolve, transport and/or absorb through the physiological environment. A great number of drugs are characterized with low water solubility due to their hydrophobic nature, thus limiting their oral bioavailability and clinical use. Therefore, new strategies aiming to provide a protective shell through the GI system and improve drug solubility and permeability in the intestine were developed to overcome this limitation. Lipid-based systems have been proposed as good candidates for such a task owing to their hydrophobic nature which allows high drug loading, drug micellization ability during intestinal digestion due to the lipid content, and the vehicle physical protective environment. The use of edible lipids with high biocompatibility paves the bench-to-bedside translation. Four main types of structured lipid-based drug delivery systems differing in the physical state of the lipid phase have been described in the literature, namely emulsions, solid lipid nanoparticles, nanostructured lipid carriers, and oleogel-based particles. The current review provides a comprehensive overview of the different structured edible lipid-based oral delivery systems investigated up to date and emphasizes the contribution of each system component to the delivery performance, and the oral delivery path of lipids.

Application of Analytical Methods for the Comprehensive Analysis of Oleogels-A Review

Numerous empirical studies have already been conducted on the innovative fat-replacing system defined as oleogel, creating a real urge for setting up a framework for future research, rather than conducting studies with arbitrary methods. This study re-evaluates the utility of some analyses and states some conclusions in order to eliminate the reluctance of food processors and consumers towards the utilization of oleogels as ingredients. The review presents extensively the methods applied for the characterization of various oleogels, while highlighting their addressability or inconveniences. The discussed methods were documented from the research published in the last five years. A classification of the methods is proposed based on their aims or the utility of the results, which either describe the nano-structure and the network formation, the quality of the resulting oleogel or its suitability as food ingredient or other edible purposes. The general conclusions drawn for some classes of oleogels were also revisited, in order to ease the understanding of the oleogel behaviour, to encourage innovative research approaches and to stimulate the progress in the state of art of knowledge.

Formation, structural characteristics and physicochemical properties of beeswax oleogels prepared with tea polyphenol loaded gelators

In this study, a tea polyphenol (TP) loaded beeswax gelator (TP gelator) was constructed and incorporated into soybean oil to improve the oxidative stability of oleogels. The effects of TP on the structure and storage stability of oleogels were investigated. The TP gelator prepared by embedding TP into beeswax improved the dispersity of TP in lipids. The thermal characteristics and X-ray diffraction analysis showed that the components of the TP gelator coexisted homogeneously and TP was well dispersed in beeswax. The Fourier-transform infrared spectra indicated that the phenolic hydroxyl group of TP had intermolecular force with the quaternary ammonium nitrogen in the choline portion of soybean lecithin. The formation of needle-like crystals by beeswax restricted the flow of liquid oil, and TP did not participate in the construction of the internal network structure of the oleogel. In the accelerated storage experiment at 60 °C, the peroxide value of the TP loaded oleogel decreased by 60.6% at the end of the storage period compared with soybean oil. TP was successfully embedded in the oleogel without changing its structure, which not only solved the problem of poor dispersion of TP in oil, but also showed a significant inhibitory effect on lipid oxidation.