Bio-inspired wettability patterns for biomedical applications

Fabrication of polymeric microspheres for biomedical applications

Polymeric microspheres (PMs) have attracted great attention in the field of biomedicine in the last several decades due to their small particle size, special functionalities shown on the surface and high surface-to-volume ratio. However, how to fabricate PMs which can meet the clinical needs and transform laboratory achievements to industrial scale-up still remains a challenge. Therefore, advanced fabrication technologies are pursued. In this review, we summarize the technologies used to fabricate PMs, including emulsion-based methods, microfluidics, spray drying, coacervation, supercritical fluid and superhydrophobic surface-mediated method and their advantages and disadvantages. We also review the different structures, properties and functions of the PMs and their applications in the fields of drug delivery, cell encapsulation and expansion, scaffolds in tissue engineering, transcatheter arterial embolization and artificial cells. Moreover, we discuss existing challenges and future perspectives for advancing fabrication technologies and biomedical applications of PMs.

A Wettability Contrast SERS Droplet Assay for Multiplexed Analyte Detection

Droplet assay platforms have emerged as a significant methodology, providing distinct advantages such as sample compartmentalization, high throughput, and minimal analyte consumption. However, inherent complexities, especially in multiplexed detection, remain a challenge. We demonstrate a novel strategy to fabricate a plasmonic droplet assay platform (PDAP) for multiplexed analyte detection, enabling surface-enhanced Raman spectroscopy (SERS). PDAP efficiently splits a microliter droplet into submicroliter to nanoliter droplets under gravity-driven flow by wettability contrast between two distinct regions. The desired hydrophobicity and adhesive contrast between the silicone oil-grafted nonadhesive hydrophilic zone with gold nanoparticles is attained through (3-aminopropyl) triethoxysilane (APTES) functionalization of gold nanoparticles (AuNPs) using a scotch-tape mask. The wettability contrast surface facilitates the splitting of aqueous droplets with various surface tensions (ranging from 39.08 to 72 mN/m) into ultralow volumes of nanoliters. The developed PDAP was used for the multiplexed detection of Rhodamine 6G (Rh6G) and Crystal Violet (CV) dyes. The limit of detection for 120 nL droplet using PDAP was found to be 134 pM and 10.1 nM for Rh6G and CV, respectively. These results align with those from previously reported platforms, highlighting the comparable sensitivity of the developed PDAP. We have also demonstrated the competence of PDAP by testing adulterant spiked milk and obtained very good sensitivity. Thus, PDAP has the potential to be used for the multiplexed screening of food adulterants.

Tuning Hydrophobicity of Paper Substrates for Effective Colorimetric detection of Glucose and Nucleic acids

This study investigated the colorimetric response of standard glucose, serum glucose, and nucleic acid assays on various paper surfaces with different wettability, including hydrophilic, hydrophobic, and nearly superhydrophobic surfaces. Water contact angles (WCA) formed by water droplets on each surface were measured using ImageJ software. The hydrophilic surface showed no contact angle, while the hydrophobic and nearly superhydrophobic surfaces exhibited contact angles of 115.667° and 133.933°, respectively. The colorimetric sensitivity of the standard glucose assay was analyzed on these surfaces, revealing enhanced sensitivity on the nearly superhydrophobic surface due to the high molecular crowding effect owing to its non-wetting behavior and eventually confined reaction product at the sample loading zone. The hydrophobic nature of the surface restricts the spreading and diffusion of the reaction product, leading to a controlled and localized concentration of the assay product leading to moderate colorimetric intensity. On the other hand, the hydrophilic surface showed the least enhancement in colorimetric sensitivity; this is attributed to the high wettability of the hydrophilic surface causing the reaction product to spread extensively, resulting in a larger area of dispersion and consequently a lower colorimetric intensity. The measured limit of detection (LOD) for nucleic acid on nearly superhydrophobic surfaces was found to be 16.15 ng/µL, which was almost four-fold lower than on hydrophilic surfaces (60.08 ng/µL). Additionally, the LODs of standard glucose and clinical serum samples were two-fold lower on nearly superhydrophobic surfaces compared to hydrophilic surfaces. Our findings clearly highlight the promising potential of utilizing superhydrophobic surfaces to significantly enhance colorimetric sensitivity in paper-based diagnostic applications. This innovative approach holds promise for advancing point-of-care diagnostics and improving disease detection in resource-limited settings.

Biomimetic 3D efficient fog harvester by synergistic wettability effect

By collecting water in the air, it is an important way to solve the problem of water shortage in arid and semi-arid areas. Improving the efficiency of fog harvesting is still a great challenge to be overcome. The use of 3D structure is an excellent strategy, here, a Multiple-biomimetic 3D hydrophilic and superhydrophobic fog harvester with a hump-valley structure was prepared by the combination of thermal processing and spraying. Inspired by biological water collection in nature, a 3D porous sponge surface with hydrophilic valley and superhydrophobic hump was obtained by two-step treatment. This surface structure showed excellent fog harvesting performance, which was 185 % higher than the original sponge. This structure accelerates the capture, transfer and transport of droplets during the fog harvesting process and greatly improves the efficiency of fog harvest. The results show that the chemical gradient and structural gradient actuation we constructed on the melamine sponge surface can effectively improve the fog collection efficiency. A surface with a linear hump-valley mixed wettability pattern is designed, and it is proved that fog collection efficiency can be effectively improved at the droplet capture and transfer stage and transport stage respectively. This study highlights a simple and cheap integrated fog harvester material design.

A UV-Resistant Heterogeneous Wettability-Patterned Surface

Preparing UV-resistant heterogeneous wettability patterns is critical for the practical application of surfaces with heterogeneous wettability. However, combining UV-resistant superhydrophobic and superhydrophilic materials on heterogeneous surfaces is challenging. Inspired by the structure of cell membranes, a UV-resistant heterogeneous wettability-patterned surface (UPS) is designed via laser ablation of the coating of multilayer structures. UV-resistant superhydrophobic silica patterns can be created in situ on surfaces covered with superhydrophilic TiO2 nanoparticles. The UV resistance time of the UPS with a TiO2 -based surface is more than two orders of magnitude higher than that obtained with other surface molecular modification methods that require a mask. The cell-membrane-like structure of the UPS regulates the migration of internal siloxane chain segments in the hydrophilic and hydrophobic regions of the surface. The UPS enables efficient patterning of functional materials under UV irradiation, controlling the wetting behavior of liquids in open-air systems. Furthermore, its heterogeneous wettability remains stable even after 50 h of intense UV irradiation (365 nm, 500 mW cm-2 ). These UV-resistant heterogeneous wettability patterned surfaces will likely be applied in microfluidics, cell culture, energy conversion, and water collection in the future.

Manufacture of a modular fog harvesting system combining 3D printing and wettability-contrasting patterns

A modular fog harvesting system consisting of a water collection module and a water tank module is designed and manufactured with 3D printing technology and can be assembled like Lego bricks within a reasonable range. Combined with a Namib-beetle-inspired hybrid-patterned surface, this system shows a significant capacity for fog harvesting.

Hierarchical hydrogel microarrays fabricated based on a microfluidic printing platform for high-throughput screening of stem cell lineage specification

2D cell cultures are suitable for rapid exploration of the factors in the extracellular matrix affecting the development of cells. The technology of the micrometre-sized hydrogel array provides a feasible, miniaturized, and high-throughput strategy for the process. However, current microarray devices lack a handy and parallelized methodology in sample treatment, which makes the process of high-throughput cell screening (HTCS) expensive and inefficient. Here, based on the functionalization of micro-nano structures and the fluid control capability of microfluidic chips, we build a microfluidic spotting-screening platform (MSSP). The MSSP can print 20000 microdroplet spots within 5 min, coupled with a simple strategy for parallel addition of compound libraries. Compared with open microdroplet arrays, the MSSP can control the evaporation rate of nanoliter droplets, providing a stable fabrication platform for hydrogel-microarray-based materials. As a proof-of-concept demonstration, the MSSP successfully controlled the adhesion, adipogenic, and osteogenic differentiation behavior of mesenchymal stem cells by rationally designing the substrate stiffness, adhesion area, and cell density. We anticipate that the MSSP may provide an accessible and promising tool for hydrogel-based HTCS. STATEMENT OF SIGNIFICANCE: High-throughput screening of cells is a common approach to improve the efficiency of biological experiments, and one challenge of the existing technologies is to achieve rapid and precise cell screening with a low-cost and simple strategy. Through the integration of the microfluidic and micro-nanostructure technologies, we fabricated a microfluidic spotting-screening platforms. Benefiting from the flexible control of the fluids, the device can print 20000 microdroplet spots within 5 min, coupled with a simple procedure for parallel addition of compound libraries. High-throughput screening of stem cell lineage specification has also been achieved by the platform, which provides a high-throughput, high-content information extraction strategy for cell-biomaterial interaction research.

An in situ exosomal miRNA sensing biochip based on multi-branched localized catalytic hairpin assembly and photonic crystals

Exosomal microRNAs (miRNAs) are emerging as attractive non-invasive and reliable biomarkers for disease diagnosis. In situ exosomal miRNA detection can avoid laborious and time-consuming exosome lysis, RNA extraction and effectively improve the accuracy. However, in situ exosomal miRNA detection is hampered by the low abundance of the targets and low permeability of the probes. Herein, an in situ exosomal miRNA sensing biochip based on multi-branched localized catalytic hairpin assembly (MLCHA) and photonic crystals (PCs) was proposed. The MLCHA probes could penetrate into the exosomes nondestructively due to its rigidity and generate amplified fluorescence signal upon recognizing the target miRNA. And then, the fluorescence signal was further enhanced by PCs to improve the sensitivity. The developed biosensor can not only detect exosomal miRNA in a concentration-dependent manner but also distinguish samples from cancer state and healthy state, which is potential for non-invasive clinical diagnostics.

Patterning Wettability for Open-Surface Fluidic Manipulation: Fundamentals and Applications

Effective manipulation of liquids on open surfaces without external energy input is indispensable for the advancement of point-of-care diagnostic devices. Open-surface microfluidics has the potential to benefit health care, especially in the developing world. This review highlights the prospects for harnessing capillary forces on surface-microfluidic platforms, chiefly by inducing smooth gradients or sharp steps of wettability on substrates, to elicit passive liquid transport and higher-order fluidic manipulations without off-the-chip energy sources. A broad spectrum of the recent progress in the emerging field of passive surface microfluidics is highlighted, and its promise for developing facile, low-cost, easy-to-operate microfluidic devices is discussed in light of recent applications, not only in the domain of biomedical microfluidics but also in the general areas of energy and water conservation.

Oscillations of Drops with Mobile Contact Lines on the International Space Station: Elucidation of Terrestrial Inertial Droplet Spreading

We analyze shape oscillations of sessile water drops with fully mobile contact lines (CL) aboard the International Space Station. The unique microgravity environment enables the study of centimeter-sized droplets with associated inertial-capillary motions. Plane-normal substrate vibrations induce resonance behaviors quantified by frequency scans from which the natural frequencies and mode shapes are identified for nine different hydrophobic surfaces. Experimental observations agree well with, and validate, a recent spectral prediction of mobile CL sessile drop oscillations. The experimental findings help elucidate terrestrial droplet inertial spreading, a poorly understood phenomenon pervasive in many processes.

Biomimetic Rose Petal Structures Obtained Using UV-Nanoimprint Lithography

This study aims to produce a hydrophobic polymer film by mimicking the hierarchical micro/nanostructures found on the surface of rose petals. A simple and two-step UV-based nanoimprint lithography was used to copy rose petal structures on the surface of a polyurethane acrylate (PUA) film. In the first step, the rose petal was used as a template, and its negative replica was fabricated on a commercial UV-curable polymer film. Following this, the negative replica was used as a stamp to produce rose petal mimetic structures on UV curable PUA film. The presence of these structures on PUA influenced the wettability behavior of PUA. Introducing the rose petal mimetic structures led the inherently hydrophilic material to display highly hydrophobic behavior. The neat PUA film showed a contact angle of 65°, while the PUA film with rose petal mimetic structures showed a contact angle of 138°. Similar to natural materials, PUA with rose petal mimetic structures also displayed the water pinning effect. The water droplet was shown to have adhered to the surface of PUA even when the surface was turned upside down.

Bis-Pyridine-Based Organogel with AIE Effect and Sensing Performance towards Hg2

A novel gelator (1) based on a bis-pyridine derivative was designed and synthesized, which could form stable gels in methanol, ethanol, acetonitrile, ethyl acetate, DMF/H₂O (4/1, v/v) and DMSO/H₂O (4/1, v/v). The self-assembly process of gelator 1 was studied by field emission scanning electron microscopy (FESEM), UV–vis absorption spectroscopy, fluorescence emission spectroscopy, Fourier transform infrared spectroscopy (FT-IR), X-ray powder diffraction and a water contact angle experiment. Gelator 1 exhibited obvious AIE behavior. On the base of its AIE, the gel of 1 could detect Hg²⁺, which resulted in fluorescence quenching and a gel–sol transition. ¹H NMR titration experiments with Hg²⁺ revealed that the metal coordination interaction induced the fluorescence quenching and the breakdown of the noncovalent interaction in the gel system. This research provides a new molecular mode for designing a functional self-assembly gel system.

Surface Wettability for Skin-Interfaced Sensors and Devices

The practical applications of skin-interfaced sensors and devices in daily life hinge on the rational design of surface wettability to maintain device integrity and achieve improved sensing performance under complex hydrated conditions. Various bio-inspired strategies have been implemented to engineer desired surface wettability for varying hydrated conditions. Although the bodily fluids can negatively affect the device performance, they also provide a rich reservoir of health-relevant information and sustained energy for next-generation stretchable self-powered devices. As a result, the design and manipulation of the surface wettability are critical to effectively control the liquid behavior on the device surface for enhanced performance. The sensors and devices with engineered surface wettability can collect and analyze health biomarkers while being minimally affected by bodily fluids or ambient humid environments. The energy harvesters also benefit from surface wettability design to achieve enhanced performance for powering on-body electronics. In this review, we first summarize the commonly used approaches to tune the surface wettability for target applications toward stretchable self-powered devices. By considering the existing challenges, we also discuss the opportunities as a small fraction of potential future developments, which can lead to a new class of skin-interfaced devices for use in digital health and personalized medicine.

Recent Progress on Bioinspired Antibacterial Surfaces for Biomedical Application

Surface bacterial fouling has become an urgent global challenge that calls for resilient solutions. Despite the effectiveness in combating bacterial invasion, antibiotics are susceptible to causing microbial antibiotic resistance that threatens human health and compromises the medication efficacy. In nature, many organisms have evolved a myriad of surfaces with specific physicochemical properties to combat bacteria in diverse environments, providing important inspirations for implementing bioinspired approaches. This review highlights representative natural antibacterial surfaces and discusses their corresponding mechanisms, including repelling adherent bacteria through tailoring surface wettability and mechanically killing bacteria via engineering surface textures. Following this, we present the recent progress in bioinspired active and passive antibacterial strategies. Finally, the biomedical applications and the prospects of these antibacterial surfaces are discussed.

Facile fabrication of micropattern surfaces with controlled wettability on PDMS-modified fiber membranes for cell patterning

Various cell culture substrates have been developed for cell patterning to control cell distributions and orientations in tissue engineering, drug screening and regenerative medicine. In this study, a preparation method of modified fiber membranes was applied in the field of cell patterning, and the obtained fiber membranes guided the cell distributions and orientations flexibly. The aligned electrospinning fiber membranes were dip-coated with polydimethylsiloxane (PDMS) to improve the stability of wettability, and then it was treated with oxygen plasma with a photomask to obtain a hydrophilic-hydrophobic surface micropattern. The morphologies, wettabilities and chemical structures of the membranes were analyzed by using a scanning electron microscope (SEM), drop shape analysis instrument, energy dispersive spectrometer (EDS) and Fourier transform infrared (FTIR) spectrometer. The L929 cells were cultured on the obtained membranes to observe the controlled cell distributions and orientations by using a SEM and fluorescence microscope. The results indicate that the treated membranes have the ability to control both cell distributions and orientations simultaneously. This method offers a novel approach to develop cell culture substrates for cell patterning in tissue engineering.

High-Performance Heterogeneous Thermocatalysis Caused by Catalyst Wettability Regulation

Catalyst wettability regulation has emerged as an attractive approach for high catalytic performance for the past few years. By introducing appropriate wettability, the molecule diffusion of reactants and products can be enhanced, leading to high activity. Besides this, undesired molecules are isolated for high selectivity of target products and long-term stability of catalyst. Herein, we summarize wettability-induced high-performance heterogeneous thermocatalysis in recent years, including hydrophilicity, hydrophobicity, hybrid hydrophilicity-hydrophobicity, amphiphilicity, and superaerophilicity. Relevant reactions are further classified and described according to the reason for the performance improvement. It should be pointed out that studies of utilizing superaerophilicity to improve heterogeneous thermocatalytic performance have been included for the first time, so this is a comparatively comprehensive review in this field as yet.

Droplet motion on sonically excited hydrophobic meshes

The sonic excitation of the liquid droplet on a hydrophobic mesh surface gives rise to a different oscillation behavior than that of the flat hydrophobic surface having the same contact angle. To assess the droplet oscillatory behavior over the hydrophobic mesh, the droplet motion is examined under the external sonic excitations for various mesh screen aperture ratios. An experiment is carried out and the droplet motion is recorded by a high-speed facility. The findings revealed that increasing sonic excitation frequencies enhance the droplet maximum displacement in vertical and horizontal planes; however, the vertical displacements remain larger than those of the horizontal displacements. The resonance frequency measured agrees well with the predictions and the excitation frequency at 105 Hz results in a droplet oscillation mode (n) of 4. The maximum displacement of the droplet surface remains larger for the flat hydrophobic surface than that of the mesh surface with the same contact angle. In addition, the damping factor is considerably influenced by the sonic excitation frequencies; hence, increasing sonic frequency enhances the damping factor, which becomes more apparent for the large mesh screen aperture ratios. The small-amplitude surface tension waves create ripples on the droplet surface.

Quaternized chitin/tannic acid bilayers layer-by-layer deposited poly(lactic acid)/polyurethane nanofibrous mats decorated with photoresponsive complex and silver nanoparticles for antibacterial activity

Chronic wounding treatment based on bacterially infected diabetes suffers an essential limitation in persistent skin injuries due to the resistance of progressive antibiotics, which inhibits the process of healing with wound tissue. Therefore, biologically friendly and nontoxic bio-based mats without antibiotics are taken for granted as a versatile platform for biomedical dressing, but urgently necessitates further functional diversification. Herein, a novel tannic acid (TA)/silver (Ag)-modified poly(lactic acid) (PLA)/Polyurethane (PU) antibacterial hybrid nanofibers were successfully constructed by electrospinning technology. Layer-by-layer (LBL) self-assembly technique was utilized to produce membranes via deposited biocompatible quaternized chitin (QC) and TA. The mats are enabled with outstanding flexibility, antibacterial activity, great hemocompatibility, and good ROS-scavenger in a wounding environment. Consequently, the basis of morphology and structure of electrospun membranes was verified by SEM and FT-IR. Besides, the LBL-structured surface was proved to impart improved wettability and hydrophilic via the test of water contact angle. Additionally, antimicrobial experiments demonstrate the effective broad-spectrum antibacterial ability of as-prepared hybrids, inhibiting infection of gram-positive microbial (S. aureus) as well as gram-negative microbial. Finally, the anti-oxidation performance holds great promise in conducive to the formation favorable physiological environment for wound healing. In conclusion, this work establishes a feasible but effective pathway to construct a multifunctional antibacterial dressing for the skin infection.

Applied surface enhanced Raman Spectroscopy in plant hormones detection, annexation of advanced technologies: A review

Plant hormones are the molecules that control the vigorous development of plants and help to cope with the stress conditions efficiently due to vital and mechanized physiochemical regulations. Biologists and analytical chemists, both endorsed the extreme problems to quantify plant hormones due to their low level existence in plants and the technological support is devastatingly required to established reliable and efficient detection methods of plant hormones. Surface Enhanced Raman Spectroscopy (SERS) technology is becoming vigorously favored and can be used to accurately and specifically identify biological and chemical molecules. Subsistence molecular properties with varying excitation wavelength require the pertinent substrate to detect SERS signals from plant hormones. Three typical mechanisms of Raman signal enhancement have been discovered, electromagnetic, chemical and Tip-enhanced Raman spectroscopy (TERS). Though, complex detection samples hinder in consistent and reproducible results of SERS-based technology. However, different algorithmic models applied on preprocessed data enhanced the prediction performances of Raman spectra by many folds and decreased the fluorescence value. By incorporating SERS measurements into the microfluidic platform, further highly repeatable SERS results can be obtained. This review paper tends to study the fundamental working principles, methods, applications of SERS systems and their execution in experiments of rapid determination of plant hormones as well as several ways of integrated SERS substrates. The challenges to develop an SERS-microfluidic framework with reproducible and accurate results for plant hormone detection are discussed comprehensively and highlighted the key areas for future investigation briefly.

Alginate-Based Smart Materials and Their Application: Recent Advances and Perspectives

Nature produces materials using available molecular building blocks following a bottom-up approach. These materials are formed with great precision and flexibility in a controlled manner. This approach offers the inspiration for manufacturing new artificial materials and devices. Synthetic artificial materials can find many important applications ranging from personalized therapeutics to solutions for environmental problems. Among these materials, responsive synthetic materials are capable of changing their structure and/or properties in response to external stimuli, and hence are termed "smart" materials. Herein, this review focuses on alginate-based smart materials and their stimuli-responsive preparation, fragmentation, and applications in diverse fields from drug delivery and tissue engineering to water purification and environmental remediation. In the first part of this report, we review stimuli-induced preparation of alginate-based materials. Stimuli-triggered decomposition of alginate materials in a controlled fashion is documented in the second part, followed by the application of smart alginate materials in diverse fields. Because of their biocompatibility, easy accessibility, and simple techniques of material formation, alginates can provide solutions for several present and future problems of humankind. However, new research is needed for novel alginate-based materials with new functionalities and well-defined properties for targeted applications.

Tailoring Materials with Specific Wettability in Biomedical Engineering

As a fundamental feature of solid surfaces, wettability is playing an increasingly important role in our daily life. Benefitting from the inspiration of biological paradigms and the development in manufacturing technology, numerous wettability materials with elaborately designed surface topology and chemical compositions have been fabricated. Based on these advances, wettability materials have found broad technological implications in various fields ranging from academy, industry, agriculture to biomedical engineering. Among them, the practical applications of wettability materials in biomedical-related fields are receiving remarkable researches during the past decades because of the increasing attention to healthcare. In this review, the research progress of materials with specific wettability is discussed. After briefly introducing the underlying mechanisms, the fabrication strategies of artificial materials with specific wettability are described. The emphasis is put on the application progress of wettability biomaterials in biomedical engineering. The prospects for the future trend of wettability materials are also presented.

Microstructured Surfaces for Reducing Chances of Fomite Transmission via Virus-Containing Respiratory Droplets

Evaporation-induced particle aggregation in drying droplets is of significant importance in the prevention of pathogen transfer due to the possibility of indirect fomite transmission of the infectious virus particles. In this study, particle aggregation was directionally controlled using contact line dynamics (pinned or slipping) and geometrical gradients on microstructured surfaces by the systematic investigation of the evaporation process on sessile droplets and sprayed microdroplets laden with virus-simulant nanoparticles. Using this mechanism, we designed robust particle capture surfaces by significantly inhibiting the contact transfer of particles from fomite surfaces. For the proof-of-concept, interconnected hexagonal and inverted pyramidal microwall were fabricated using ultraviolet-based nanoimprint lithography, which is considered to be a promising scalable manufacturing process. We demonstrated the potentials of an engineered microcavity surface to limit the contact transfer of particle aggregates deposited with the evaporation of microdroplets by 93% for hexagonal microwall and by 96% for inverted pyramidal microwall. The particle capture potential of the interconnected microstructures was also investigated using biological particles, including adenoviruses and lung-derived extracellular vesicles. The findings indicate that the proposed microstructured surfaces can reduce the indirect fomite transmission of highly infectious agents, including norovirus, rotavirus, or SARS-CoV-2, via respiratory droplets.

Simple Method for the Fabrication of Multiple Superwetting Surfaces with Photoresponse

There have been many studies on special wetting surfaces, but most of them just stay superlyophobic in air or underwater. In this work, a membrane with photoresponse is fabricated by spraying hybrid particles of silicon and titanium dioxide. Under the combined action of hybrid particles and 1H,1H,2H,2H-perfluorodecyltrimethoxysilane, the prepared membrane is superhydrophobic in air. Because of the presence of titanium dioxide, the membrane can realize the transformation from superoleophilic underwater to superoleophobic underwater through UV irradiation and heating. Surprisingly, the membranes with superoleophobicity underwater are also superhydrophobic underoil. Thanks to this unique wettability transition, the prepared membrane can be applied to emulsion separation and fog harvesting. This is inspiring for the preparation and the multifunctional application of multiphase media superlyophobic surfaces.