Enhancement of the photocatalytic synchronous removal of Cr(vi) and RhB over RP-modified flower-like SnS2

MoS2-CdS composite for photocatalytic reduction of hexavalent chromium and thin film optoelectronic device applications

We introduce an enhanced light-harvesting MoS2-based nanocomposite exhibiting improved solar light induced photocurrent generation, both in solution and solid phases. The MoS2-CdS composite was synthesized via easy to achieve, cost effective, two-step solution process for the photocatalytic potassium dichromate [Cr(VI)] reduction and photocurrent generation in thin-film optoelectronic devices. Incorporating 10 wt% MoS2 into the composite increased the degradation efficiency of CdS from 43.9 to 91.9%. Furthermore, the MoS2-CdS composite demonstrated a 2.88-fold increase in the degradation rate constant and a 2.15% enhancement in the apparent quantum yield compared to controlled CdS. Additionally, the electrical power consumption per order decrease in Cr(VI) reduced from 25.74 kWh m-3 for controlled CdS to 9 kWh m-3 aimed at 10 wt% MoS2-CdS composite, indicating optimal synergy between the counterparts of MoS2-CdS in its composite. The resulting thin-film device with 10 wt% MoS2-CdS exhibited robust photocurrent generation and nonlinear I-V characteristics under solar illumination, attributed to the unique electronic properties of the MoS2-CdS heterojunction, influencing carrier transport via band alignment and interface carrier trapping effects. Moreover, photocurrent generation increased linearly with illumination intensity, and dynamic photo response studies revealed rapid photocurrent generation under illumination. Furthermore, the optoelectronic key parameters of CdS, including photosensitivity, photoresponsivity, and detectivity, were enhanced by factors of 5.09, 3.33, and 12.3, respectively, upon composite formation with MoS2. This study offers novel insights into developing high-performance and cost-effective bimetallic sulfide photocatalysts for efficient solar light-induced photocurrent generation in both solution and solid phases.

A 2D nanoflower-like ordered mesoporous Bi12ZnO20 catalyst with excellent photocatalytic antibacterial properties

The ordered mesoporous ZnO was successfully synthesized using the template method in this article, and Bi ions were etched into ZnO to form two-dimensional nanoflower structures of Bi12ZnO20 with NA3SSA as a guiding agent. The crystal structure, morphology, and optical properties of the photocatalyst were characterized by X-ray diffractometer (XRD), scanning electron microscope (SEM), energy-dispersive spectrometer(EDS), and ultraviolet-visible diffuse reflectance spectrum (UV-vis DRS). Under illumination conditions, the obtained materials exhibited excellent bactericidal ability against both gram-positive and gram-negative bacteria, as well as effective inhibition against fungi. Among them, the bactericidal effect of Pseudomonas aeruginosa was found to be the most rapid, achieving a sterilization rate of 100% within 30 min of light irradiation. Even after three cycles of antibacterial activity testing, the Bi12ZnO20 material still demonstrated good photocatalytic performance. The nanoflower-shaped materials provide an enhanced fluid adsorption capacity and more active centers for photocatalytic reactions while also improving light absorption capacity, photogenerated electron-hole separation efficiency, and electron transport efficiency. The cytotoxicity assessment of Bi12ZnO20 revealed no significant toxic effects. Therefore, this study presents a nanoflower-shaped material with highly efficient photocatalytic antibacterial properties for applications in production and daily life; it holds significant importance in eliminating harmful bacteria and plays a crucial role in environmental protection.

IMPORTANCE

The flower-shaped photocatalytic material Bi12ZnO20, consisting of nanoparticles, was successfully synthesized in this study. Rigorous antibacterial experiments were conducted on various fungi using the material, yielding excellent results. Furthermore, the application of this material for antibacterial treatment of livestock and poultry manure sewage in real-life scenarios demonstrated remarkable efficacy.

Enhanced photocatalytic performance of SnS2 under visible light irradiation: strategies and future perspectives

Tin(II) sulfide (SnS2) has emerged as a promising candidate for visible light photocatalytic materials. As a member of the transition metal dichalcogenides (TMDs) family, SnS2 features a band gap of approximately 2.20 eV and a layered structure, rendering it suitable for visible light activation with a high specific surface area. However, the application of SnS2 as a visible light photocatalyst still requires improvement, particularly in addressing the high recombination of electrons and holes, as well as the poor selectivity inherent in its perfect crystal structure. Therefore, ongoing research focuses on strategies to enhance the photocatalytic performance of SnS2. In this comprehensive review, we analyze recent advances and promising strategies for improving the photocatalytic performance of SnS2. Various successful approaches have been reported, including controlling the reactive facets of SnS2, inducing defects in the crystal structure, manipulating morphologies, depositing noble metals, and forming heterostructures. We provide a detailed understanding of these phenomena and the preparation techniques involved, as well as future considerations for exploring new science in SnS2 photocatalysis and optimizing performance.

Synthesis of novel CuNb2O6/g-C3N4 binary photocatalyst towards efficient visible light reduction of Cr (VI) and dyes degradation for environmental remediation

The further development of an efficient and sustainable water treatment requires the development of a very active and controllable photocatalyst. The heterojunction is a promising site where the activity of such a photocatalyst can be enhanced. Organic dyes have become a severe concern in recent years owing to their significant presence in wastewater. Hexavalent Chromium (Cr (VI)) is a potential carcinogen also exhibiting great persistence in wastewater. So, a low-waste, high-performance materials is required to eliminate organic dyes and Cr (VI) from wastewater. In this study, CNO/g-CN (CuNb₂O₆/g-C₃N₄) photocatalyst synthesized via co-precipitation, followed by calcination which were characterized using physiochemical and photo-electrochemical approaches to identify their structural, photochemical and optical traits. The uniqueness of the synthesized photocatalyst is due to both its efficient photo-reduction of Cr (VI) and photo-degradation of Rhodamine B (RhB), Methylene Blue (MB) and Methyl Orange (MO) under visible light. The CNO/g-CN composite with 30% CNO heterojunctions exhibited the highest photocatalytic activity with Cr (VI) 92.80% photoreduction and efficiency degradation for RhB, MB, MO of 99.6%, 98.50%, 99.0%, respectively, with constant rate (k). This efficient photocatalytic activity is attributed to the lower recombination rate of electron-hole pairs. Free radical trapping experiments showed that ^•O₂^- and h⁺ play an important role in the photodegradation. The study, therefore, opens an alternative route in the synthesis of very efficient binary photocatalysts for application in environmental remediation.

Red Phosphorus: An Up-and-Coming Photocatalyst on the Horizon for Sustainable Energy Development and Environmental Remediation

Photocatalysis is a perennial solution that promises to resolve deep-rooted challenges related to environmental pollution and energy deficit through harvesting the inexhaustible and renewable solar energy. To date, a cornucopia of photocatalytic materials has been investigated with the research wave presently steered by the development of novel, affordable, and effective metal-free semiconductors with fascinating physicochemical and semiconducting characteristics. Coincidentally, the recently emerged red phosphorus (RP) semiconductor finds itself fitting perfectly into this category ascribed to its earth abundant, low-cost, and metal-free nature. More notably, the renowned red allotrope of the phosphorus family is spectacularly bestowed with strengthened optical absorption features, propitious electronic band configuration, and ease of functionalization and modification as well as high stability. Comprehensively detailing RP's roles and implications in photocatalysis, this review article will first include information on different RP allotropes and their chemical structures, followed by the meticulous scrutiny of their physicochemical and semiconducting properties such as electronic band structure, optical absorption features, and charge carrier dynamics. Besides that, state-of-the-art synthesis strategies for developing various RP allotropes and RP-based photocatalytic systems will also be outlined. In addition, modification or functionalization of RP with other semiconductors for promoting effective photocatalytic applications will be discussed to assess its versatility and feasibility as a high-performing photocatalytic system. Lastly, the challenges facing RP photocatalysts and future research directions will be included to propel the feasible development of RP-based systems with considerably augmented photocatalytic efficiency. This review article aspires to facilitate the rational development of multifunctional RP-based photocatalytic systems by widening the cognizance of rational engineering as well as to fine-tune the electronic, optical, and charge carrier properties of RP.

Catalytic decontamination of organic/inorganic pollutants in water and green H2 generation using nanoporous SnS2 micro-flower structured film

Recycling water and generation of H₂ simultaneously as a green technology can be a key attraction in establishing environmental sustainability. Towards this endeavor, nanoporous SnS₂ film electrodes deposited by a solution process on nickel foam demonstrate a promising electrocatalytic activity towards generation of H₂ gas at cathode while the anodic reaction leads to the decomposition of urea-waste at the rate of 10 mA cm^-2 in 1 M KOH with a lower cell-potential of 1.38 V vs RHE. The SnS₂ electrode also demonstrates an excellent catalytic activity towards hydrogen evolution reaction in a wide pH range (0-14). In addition, the SnS₂ film deposited on an FTO-substrate shows 97.56% photocatalytic-degradation of methylene-blue dye within 180 min under irradiation of visible light with a good recyclability of the photocatalyst, suggesting its high potentiality for the practical application. The demonstrated good electro- and photo-catalytic activities can be ascribed to the nanoporous structure of SnS₂ film in a flower like 3D-fashion, offering availability of abundant active catalytic sites. Our results demonstrate the application of SnS₂ nanoporous film as catalyst can be a significant greenery path for the removal of harmful inorganic/organic hazardous wastes from waste-water with simultaneous generation of green H₂ fuel.

Ultrahigh piezocatalytic capability in eco-friendly BaTiO3 nanosheets promoted by 2D morphology engineering

Piezocatalysis, converting mechanical vibration into chemical energy, is an emerging technology to address environmental issues. In this work, we propose an efficient method to significantly improve the piezocatalytic activity by morphology engineering rather than composition design. The catalytic property in BaTiO₃ nanocrystallites with diverse morphologies is investigated by dye degradation and hydrogen production under ultrasonic vibration. The BaTiO₃ nanosheets exhibit an excellent piezocatalytic activity with a degradation rate of 0.1279 min^-1 for Rhodamine B, far beyond those in previous piezocatalytic literature and even comparable to excellent photocatalysts, and also a high hydrogen production rate of 92 μmol g^-1 h^-1. Compared with nanowires and nanoparticles, the 2D morphology greatly enhances the piezocatalytic activity in nanosheets owing to much larger piezoelectric potential. This proves that the piezocatalytic property is dominated by the morphology-dependent piezoelectricity, rather than specific surface area as other catalysis. Dominated by bending vibrating mode, the piezocatalytic activity reaches a maximum at the piezoelectric resonating frequency, and it increases with the ultrasonic power. Moreover, it has good reusability and wide versatility for catalytic degradation. This work gives an in-depth understanding of piezocatalytic mechanism and provides a way to develop high performance and eco-friendly piezocatalysts.

Highly Efficient Visible Light Photodegradation of Cr(VI) Using Electrospun MWCNTs-Fe3O4@PES Nanofibers

The development of highly efficient photocatalysis has been prepared by two different methods for the photodegradation of Cr(VI) from an aqueous solution under visible light. The electrospun polyethersulfone (PES)/iron oxide (Fe3O4) and multi-wall carbon nanotubes (MWCNTs) composite nanofibers have been prepared using the electrospinning technique. The prepared materials were characterized by SEM and XRD analysis. The result reveals the successful fabrication of the composite nanofiber with uniformly and smooth nanofibers. The effect of numerous parameters were explored to investigate the effects of pH value, contact time, concentration of Cr(VI), and reusability. The MWCNTs-Fe3O4@PES composite nanofibers exhibited excellent photodegradation of Cr(VI) at pH 2 in 80 min. The photocatalysis materials are highly stable without significant reduction of the photocatalytic efficiency of Cr(VI) after five cycles. Therefore, due to its easy separation and reuse without loss of photocatalytic efficiency, the photocatalysis membrane has tremendous potential for the removal of heavy metals from aqueous solutions.