Visible-light-driven cuprous oxide nanomotors with surface-heterojunction-induced propulsion

Light-driven rGO/Cu2 + 1O tubular nanomotor with active targeted drug delivery for combination treatment of cancer cells

The unprecedented navigation ability in micro/nanoscale and tailored functionality tunes micro/nanomotors as new target drug delivery systems, open up new horizons for biomedical applications. Herein, we designed a light-driven rGO/Cu2 + 1O tubular nanomotor for active targeting of cancer cells as a drug delivery system. The propulsion performance is greatly enhanced in real cell media (5% glucose cells isotonic solution), attributing to the introduction of oxygen vacancy and reduced graphene oxide (rGO) layer for separating photo-induced electron-hole pairs. The motion speed and direction can be readily modulated. Meanwhile, doxorubicin (DOX) can be loaded quickly on the rGO layer because of π-π bonding effect. The Cu2 + 1O matrix in the tiny robots not only serves as a photocatalyst to generate a chemical concentration gradient as the driving force but also acts as a nanomedicine to kill cancer cells as well. The strong propulsion of light-driven rGO/Cu2 + 1O nanomotors coupled with tiny size endow them with active transmembrane transport, assisting DOX and Cu2 + 1O breaking through the barrier of the cell membrane. Compared with non-powered nanocarrier and free DOX, light-propelled rGO/Cu2 + 1O nanomotors exhibit greater transmembrane transport efficiency and significant therapeutic efficacy. This proof-of-concept nanomotor design presents an innovative approach against tumor, enlarging the list of biomedical applications of light-driven micro/nanomotors to the superficial tissue treatment.

NIR-Mediated Cu2O/Au Nanomotors for Synergistically Treating Hepatoma Carcinoma Cells

We presented a NIR-driven Janus Cu2O/Au nanomotor. The nanomotor has a truncated octahedral structure. By asymmetric Au evaporation, the light response range of Cu2O nanomotor is extended to near-infrared range, and the speed of Cu2O/Au nanomotors under NIR is significantly increased. In promoting apoptosis of hepatocellular carcinoma, except the nanotoxicity of Cu2O itself, the Au layer enhances the photothermal properties, allowing Cu2O/Au nanomotors to induce apoptosis in hepatocellular carcinoma cells by heating them. On the other hand, a Schottky barrier formed at the interface of Cu2O and Au, preventing the recombination of electrons, which makes more electrons react with biomolecules to produce toxic ROS to kill hepatocellular cells. The killing rate of hepatocellular carcinoma cells reached 87 % by the combined effect of nanotoxicity inhibition of proliferation and photothermal & photodynamic therapy (PTT & PDT). Nanomotors in combination with multiple approaches are explored as a new treatment to tumor in this article.

Recent Advances in Light-Driven Semiconductor-Based Micro/Nanomotors: Optimization Strategies and Emerging Applications

Micro/nanomotors represent a burgeoning field of research featuring small devices capable of autonomous movement in liquid environments through catalytic reactions and/or external stimuli. This review delves into recent advancements in light-driven semiconductor-based micro/nanomotors (LDSM), focusing on optimized syntheses, enhanced motion mechanisms, and emerging applications in the environmental and biomedical domains. The survey commences with a theoretical introduction to micromotors and their propulsion mechanisms, followed by an exploration of commonly studied LDSM, emphasizing their advantages. Critical properties affecting propulsion, such as surface features, morphology, and size, are presented alongside discussions on external conditions related to light sources and intensity, which are crucial for optimizing the propulsion speed. Each property is accompanied by a theoretical background and conclusions drawn up to 2018. The review further investigates recent adaptations of LDSM, uncovering underlying mechanisms and associated benefits. A brief discussion is included on potential synergistic effects between different external conditions, aiming to enhance efficiency-a relatively underexplored topic. In conclusion, the review outlines emerging applications in biomedicine and environmental monitoring/remediation resulting from recent LDSM research, highlighting the growing significance of this field. The comprehensive exploration of LDSM advancements provides valuable insights for researchers and practitioners seeking to leverage these innovative micro/nanomotors in diverse applications.

Light-driven micro/nanomotors in biomedical applications

Nanotechnology brings hope for targeted drug delivery. However, most current drug delivery systems use passive delivery strategies with limited therapeutic efficiency. Over the past two decades, research on micro/nanomotors (MNMs) has flourished in the biomedical field. Compared with other driven methods, light-driven MNMs have the advantages of being reversible, simple to control, clean, and efficient. Under light irradiation, the MNMs can overcome several barriers in the body and show great potential in the treatment of various diseases, such as tumors, and gastrointestinal, cardiovascular and cerebrovascular diseases. Herein, the classification and mechanism of light-driven MNMs are introduced briefly. Subsequently, the applications of light-driven MNMs in overcoming physiological and pathological barriers in the past five years are highlighted. Finally, the future prospects and challenges of light-driven MNMs are discussed as well. This review will provide inspiration and direction for light-driven MNMs to overcome biological barriers in vivo and promote the clinical application of light-driven MNMs in the biomedical field.

Visualizing Facets Asymmetry Induced Directional Movement of Cadmium Chloride Nanomotor

Nanomotors in solution have many potential applications. However, it has been a significant challenge to realize the directional motion of nanomotors. Here, we report cadmium chloride tetrahydrate (CdCl2·4H2O) nanomotors with remarkable directional movement under electron beam irradiation. Using in situ liquid phase transmission electron microscopy, we show that the CdCl2·4H2O nanoparticle with asymmetric surface facets moves through the liquid with the flat end in the direction of motion. As the nanomotor morphology changes, the speed of movement also changes. Finite element simulation of the electric field and fluid velocity distribution around the nanomotor assists the understanding of ionic self-diffusiophoresis as a driving force for the nanomotor movement; the nanomotor generates its own local ion concentration gradient due to different chemical reactivities on different facets.

Light-driven MOF-based micromotors with self-floating characteristics for water sterilization

Three-dimensional motion (especially in the Z-axis direction) of metal-organic frameworks (MOFs)-based micromotors (MOFtors) is essential but still in its infancy. Herein, we propose a simple strategy for designing light-driven MOFtors that move in the Z-axis direction and efficiently kill Staphylococcus aureus (S. aureus). The as-prepared polypyrrole nanoparticles (PPy NPs) with excellent photothermal properties are combined with ZIF-8 through a simple in situ encapsulation method, resulting in multi-wavelength photothermally-responsive MOFtors (PPy/ZIF-8). Under the irradiation of near-infrared (NIR)/ultraviolet (UV)/blue light, the MOFtors all exhibited negative phototaxis and high-speed motion behaviour with the highest speed of 2215 ± 338 μm s-1. In addition, it is proved that these MOFtors can slowly self-float up in an aqueous environment. The light irradiation will accelerate the upward movement of the MOFtors, and the time required for the MOFtors to move to the top is negatively correlated with the light intensity. Finally, efficient antibacterial performances (up to 98.89% against S. aureus) are achieved with these light-driven MOFtors owing to the boosted Zn2+ release by vigorous stirring motion and physical entrapment by the upward motion under light irradiation.

Molecular Imprinted BiVO4 Microswimmers for Selective Target Recognition and Removal

Analogous to photosynthetic systems, photoactive semiconductor-based micro/nanoswimmers display biomimetic features that enable unique light harvesting and energy conversion functions and interactions with their surroundings. However, these artificial swimmers are usually non-selective and provide ineffective target recognition, resulting in poor surface analyte binding that affects the overall reactivity and motion efficiency. Here, the surface engineering of light-driven BiVO₄ microswimmers by molecular imprinting polymerization is presented. After embedding surface recognition sites, the modified microswimmers can self-propel in a solution of a target molecule, without requiring toxic fuels, and degrade the target selectively in a pollutant mixture. These findings show that optimizing the design of semiconductor-based microswimmers with specific target recognition cavities on their surface is a promising strategy to achieve selective capture and degradation of organic pollutants, which is otherwise impossible because of the non-selective behavior of photogenerated reactive radicals. Moreover, this study provides a unique strategy to enhance the motion capabilities of single-component photocatalytic microswimmers in a specific chemical environment.

Quantum Dot-Based Micromotors with NIR-I Light Photocatalytic Propulsion and NIR-II Fluorescence

Here, we report the first PbS quantum dot (QD)-based micromotors with NIR-I light-driven photocatalytic propulsion and NIR-II fluorescence. Under the irradiation of NIR-I light (808 nm), PbS QD-doped cuprous oxide (Cu₂O@PbS) micromotors can display efficient propulsion in a variety of biocompatible fuels such as malic acid, glucose, and urea. Among them, the Cu₂O@PbS micromotors exhibit the best propulsion performance in a very low concentration of malic acid, with an average speed as high as 11.86 μm/s. The enhanced NIR-I photocatalytic activity of Cu₂O@PbS micromotors benefits from the doping of NIR-I PbS QDs that can be excited by NIR-I light and exhibit high electron transport efficiency. The doped PbS QDs can effectively increase the absorption efficiency of the micromotors in the NIR-I region while also inhibiting the recombination of photogenerated electron-hole pairs. Interestingly, due to the presence of NIR PbS QDs, the Cu₂O@PbS micromotors demonstrate prominent and stable NIR-II fluorescence (emission wavelength: 1100 nm), which offer promising potential for visualization of their position in vivo. In comparison to other photocatalytic micromotors, the simple fabrication strategy, excellent NIR-II fluorescence, together with the NIR-I light-dependent propulsion behavior of the current Cu₂O@PbS micromotors, thus pave the way for further development of advanced smart "robots" for intelligent biomedical applications.

Nanobots-based advancement in targeted drug delivery and imaging: An update

Manipulation and targeted navigation of nanobots in complex biological conditions can be achieved by chemical reactions, by applying external forces, and via motile cells. Several studies have applied fuel-based and fuel-free propulsion mechanisms for nanobots movements in environmental sciences and robotics. However, their applications in biomedical sciences are still in the budding phase. Therefore, the current review introduces the fundamentals of different propulsion strategies based on the advantageous features of applied nanomaterials or cellular components. Furthermore, the recent developments reported in various literatures on next-generation nanobots, such as Xenobots with applications of in-vitro and in-vivo drug delivery and imaging were also explored in detail. The challenges and the future prospects are also highlighted with corresponding advantages and limitations of nanobots in biomedical applications. This review concludes that with ever booming research enthusiasm in this field and increasing multidisciplinary cooperation, micro-/nanorobots with intelligence and multifunctions will emerge in the near future, which would have a profound impact on the treatment of diseases.

Fast Cross-Linked Hydrogel as a Green Light-Activated Photocatalyst for Localized Biofilm Disruption and Brush-Free Tooth Whitening

Biofilm-driven caries and tooth discoloration are two major problems in oral health care. The current methods have the disadvantages of insufficient biofilm targeting and irreversible enamel damage. Herein, an injectable sodium alginate hydrogel membrane doped with bismuth oxychloride (Bi₁₂O₁₇Cl₂) and cubic cuprous oxide (Cu₂O) nanoparticles was designed to simultaneously achieve local tooth whitening and biofilm removal through a photodynamic dental therapy process. This fast cross-linked hydrogel could form a biofilm removal coating on the target tooth surface precisely. Afterward, reactive oxygen species was effectively released on demand under green light, which could not only eradicate the biofilm but also whiten the tooth non-destructively in a facile manner without significant damage to both the enamel and biological cells. After the usage, the removal of this hydrogel can also enhance the effect of biofilm destruction and caries prevention.

Solid state molybdenum carbide nanomotors driven via high temperature carbon-decomposition catalytic reactions

The motion of solid state nanomotors, i.e., molybdenum carbide nanoparticles, which were driven via carbon-decomposition catalytic reactions at ∼2900 K, was directly observed by in situ transmission electron microscopy. The nanomotors exhibited unidirectional linear motions inside the hollow space of multiwall carbon nanotubes, reciprocating motions around the nanotube endcaps, and rotational motions in the hollow spaces of carbon nanocapsules. The inner atomic wall-layers of carbon nanotubes and nanocapsules were consumed during the nanomotor motions.

Time series of TEM images observed in the motion of a MoC nanomotor encapsulated in a carbon nanotube during in situ laser irradiation.

Extensive solar light utilizing by ternary C-dots/Cu2O/SrTiO3: Highly enhanced photocatalytic degradation of antibiotics and inactivation of E. coli

Fabrication of a visible-light driven photocatalyst is of great vital for the elimination of antibiotics and microorganism in the wastewater and the construction of sustainable green energy systems. In this work, carbon quantum dots (C-dots) were integrated with Cu₂O/SrTiO₃ p-n heterojunction to optimize the photocatalytic activity. The excellent photocatalytic degradation efficiency of chlortetracycline hydrochloride (CTC·HCl) (92.6% within 90 min) and E. coli inactivation efficiency were observed over C-dots/Cu₂O/SrTiO₃ under visible light irradiation. It is the synergistic effect of p-n heterojunction and modification of C-dots that facilitates the separation and transfer of electron-holes. Meanwhile, the modification of C-dots improves the harvesting of long wavelength solar light of photocatalysts due to its unique up-conversion photoluminescence (UCPL) characteristics. Eventually, the possible photocatalytic degradation path of the catalyst was inferred by LC-MS spectra, and the degradation mechanism was analyzed. This study sheds light on new possibilities for the application of photocatalysts in various light sources and has broad application prospects in water treatment.

Untethered Microrobots for Active Drug Delivery: From Rational Design to Clinical Settings

Recent advances of untethered microrobots, which navigate the complex regions in vivo for therapeutics, have presented promising multiple applications on future healthcare. Microrobots used for active drug delivery system (DDS) have been demonstrated for advanced targeting distribution, improved delivery efficiency, and reduced systemic side effects. In this review, the therapeutic benefits of active DDS are presented compared to the traditional passive DDS, which illustrate the historical reasons for choosing active DDS. An integrated 5D radar chart analysis model containing the core capabilities of the active DDS is innovatively proposed. It would be a practical tool for measurement and mapping of the field of active delivery, followed by the evolutions and bottlenecks of each technical module. The comprehensive consideration of microrobots before clinical application is also discussed from the aspects of robot ethics, dosage, quality control and stability control in actual production. Gastrointestinal and blood administration, as two major clinical scenes of drug delivery, are discussed in detail as examples of the potential bedside applications of active DDS. Finally, combined with the reported analysis model, the current status and future outlook from the translation prospect to the clinical scenes of microrobots are provided.