Alumina-Hydroxyapatite Millimetric Spheres for Cadmium(II) Removal in Aqueous Medium

Heavy metals can act as selective agents in the development and proliferation of antibiotic-resistant bacteria through a process called coselection. In the year 2050, an estimated 10 million deaths will be caused by antibiotic-resistant bacteria; therefore, the presence of heavy metals in bodies of water represents an environmental and sanitary threat that requires efficient treatment processes and/or materials for their removal. In the present study, the effect of the hydroxyapatite coating on the adsorbent capacity of cadmium in alumina spheres was evaluated. The hydroxyapatite coating on the alumina sphere increased the surface area from 0.66 to 0.96 m2/g and the number of acid sites from 0.064 to 0.306 meq/g and displaced the IEP of hydroxyapatite from 5.37 to 4.2, increasing the Cd2+ adsorbing capacity from 59.87 mg/g to 89.37 mg/g and promoting adsorption by surface complexation. Alumina-hydroxyapatite spheres stand out for their improved adsorbent properties and easy handling, which positioned this material as a potential alternative in adsorption processes.

Synthesis of dye-sensitized TiO2/Ag doped nano-composites using UV photoreduction process for phenol degradation: A comparative study

This study investigates a comparison between the photocatalytic action of two nanocomposites (TiO₂ and TiO₂(Ag) doped) on the degradation of phenol from water. The nanocomposites were synthesized by the UV photo-reduction process to get a silver metal loading of 0.25, 0.5, 0.75, and 1% (w/w). In addition to this, Eriochrome Cyanine Red (ECR) and Eosin Yellow (EY) both anionic dyes were used for sensitization of Ag-doped TiO₂ photo-catalyst such as TiO₂(Ag)ECR and TiO₂(Ag)EY. The TiO₂(Ag-1.0)EY photo-catalyst indicated higher absorbance compared to the TiO₂(Ag-1.0)ECR in the 400-700 nm range (visible range). The degradation of phenol was tested by varying the pH, silver loading and catalyst dosage. The maximum degradation of phenol was 98% in 180 min at pH 7 in presence of 1% (w/w) silver loading with 0.5 gL^-1 dosage of photo-catalyst TiO₂(Ag-1.0)EY. At this condition, the reduction in the phenol concentration was noticed from 20 mg/L to 0.4 mg/L.

Recent progress in nanomaterial-functionalized membranes for removal of pollutants

Membrane technology has gained tremendous attention for removing pollutants from wastewater, mainly due to their affordable capital cost, miniature equipment size, low energy consumption, and high efficiency even for the pollutants present in lower concentrations. In this paper, we review the literature to summarize the progress of nanomaterial-modified membranes for wastewater treatment applications. Introduction of nanomaterial in the polymeric matrix influences membrane properties such as surface roughness, hydrophobicity, porosity, and fouling resistance. This review also covers the importance of functionalization strategies to prepare thin-film nanocomposite hybrid membranes and their effect on eliminating pollutants. Systematic discussion regarding the impact of the nanomaterials incorporated within membrane, toward the recovery of various pollutants such as metal ions, organic compounds, dyes, and microbes. Successful examples are provided to show the potential of nanomaterial-functionalized membranes for regeneration of wastewater. In the end, future prospects are discussed to develop nanomaterial-based membrane technology.

Mesoporous maltose/calcium oxalate hybrid material with abundant reaction sites and its efficient Pb(ii) removal from diverse water bodies

Maltose/calcium oxalate exhibits high capacity and selective adsorption of Pb(ii) due to the synergistic mechanism of ion exchange, electrostatic and complexation.

Aqueous Adsorption of Heavy Metals on Metal Sulfide Nanomaterials: Synthesis and Application

Heavy metals pollution of aqueous solutions generates considerable concerns as they adversely impact the environment and health of humans. Among the remediation technologies, adsorption with metal sulfide nanomaterials has proven to be a promising strategy due to their cost-effective, environmentally friendly, surface modulational, and amenable properties. Their excellent adsorption characteristics are attributed to the inherently exposed sulfur atoms that interact with heavy metals through various processes. This work presents a comprehensive overview of the sequestration of heavy metals from water using metal sulfide nanomaterials. The common methods of synthesis, the structures, and the supports for metal sulfide nano-adsorbents are accentuated. The adsorption mechanisms and governing conditions and parameters are stressed. Practical heavy metal remediation application in aqueous media using metal sulfide nanomaterials is highlighted, and the existing research gaps are underscored.

Wireless Tags with Hybrid Nanomaterials for Volatile Amine Detection

Quality control in the production and processing of raw meat is currently one of the biggest concerns for food industry and would benefit from portable and wireless sensors capable of detecting the onset of spoilage. Raw meat is a natural source of biogenic and volatile amines as byproducts of decarboxylation reactions, and the levels of these compounds can be utilized as quality control parameters. We report herein a hybrid chemiresistor sensor based on inorganic nanofibers of SiO₂:ZnO (an n-type material) and single-walled carbon nanotubes functionalized with 3,5-dinitrophenyls (a p-type material) with dosimetric sensitivity ∼40 times higher for amines than for other volatile organic compounds, which also provides excellent selectivity. The hybrid nanomaterial-based chemiresistor sensory material was used to convert radio-frequency identification tags into chemically actuated resonant devices, which constitute wireless sensors that can be potentially employed in packaging to report on the quality of meat. Specifically, the as-developed wireless tags report on cumulative amine exposure inside the meat package, showing a decrease in radio-frequency signals to the point wherein the sensor ceased to be smartphone-readable. These hybrid material-modified wireless tags offer a path to scalable, affordable, portable, and wireless chemical sensor technology for food quality monitoring without the need to open the packaging.

Selective and rapid removal of Mo(VI) from water using functionalized Fe3O4-based Mo(VI) ion-imprinted polymer

Fe₃O₄ nanoparticles-based magnetic Mo(VI) surface ion-imprinted polymer (Mo(VI)-MIIP) was elaborated employing 4-vinyl pyridine as a functional monomer. The adsorbent preparation was confirmed by Fourier-transform infrared spectroscopy, scanning electron microscopy, energy dispersive X-ray spectrometry, X-ray diffraction, vibrating sample magnetometer, thermogravimetric analysis, and surface area analysis. Batch adsorption experiments showed that the maximum adsorption capacity of Mo(VI)-MIIP was 296.40 mg g^-1 at pH 3, while that of the magnetic non-imprinted polymer (MNIP) was only 147.10 mg g^-1. The adsorption isotherm model was well fitted by the Langmuir isotherm model. The adsorption experiments revealed that Mo(VI)-MIIP reached adsorption equilibrium within 30 min, and the kinetics data fitting showed that the pseudo-second-order kinetics model suitably described the adsorption process. Mo(VI)-MIIP exhibited an excellent adsorption selectivity to Mo(VI) in binary mixtures of Mo(VI)/Cr(VI), Mo(VI)/Cu(II), Mo(VI)/H₂PO4₄^-, Mo(VI)/Zn(II), and Mo(VI)/I^-, with relative selectivity coefficients toward MNIP of 13.71, 30.27, 20.01, 23.53, and 15.89, respectively. After six consecutive adsorption-desorption cycles, the adsorption capacity of Mo(VI)-MIIP decreased by 9.5% (from 228.4 mg g^-1 to 206.7 mg g^-1 at initial Mo(VI) concentration of 250 mg L^-1), demonstrating its reusability.