Recent advances in catalysts, electrolytes and electrode engineering for the nitrogen reduction reaction under ambient conditions

Electrocatalysts for Urea Synthesis from CO2 and Nitrogenous Species: From CO2 and N2/NOx Reduction to urea synthesis

The traditional industrial synthesis of urea relies on the energy-intensive and polluting process, namely the Haber-Bosch method for ammonia production, followed by the Bosch-Meiser process for urea synthesis. In contrast, electrocatalytic C-N coupling from carbon dioxide (CO2) and nitrogenous species presents a promising alternative for direct urea synthesis under ambient conditions, bypassing the need for ammonia production. This review provides an overview of recent progress in the electrocatalytic coupling of CO2 and nitrogen sources for urea synthesis. It focuses on the role of intermediate species and active site structures in promoting urea synthesis, drawing from insights into reactants' adsorption behavior and interactions with catalysts tailored for CO2 reduction, nitrogen reduction, and nitrate reduction. Advanced electrocatalyst design strategies for urea synthesis from CO2 and nitrogenous species under ambient conditions are explored, providing insights for efficient catalyst design. Key challenges and prospective directions are presented in the conclusion. Mechanistic studies elucidating the C-N coupling reaction and future development directions are discussed. The review aims to inspire further research and development in electrocatalysts for electrochemical urea synthesis.

Single and dual-atom catalysts towards electrosynthesis of ammonia and urea: a review

Ammonia and urea represent two important chemicals that have contributed to the rapid development of humanity. However, their industrial production requires harsh conditions, consuming excessive energy and resulting in significant greenhouse gas emission. Therefore, there is growing interest in the electrocatalytic synthesis of ammonia and urea as it can be carried out under ambient conditions. Recently, atomic catalysts (ACs) have gained increased attention for their superior catalytic properties, being able to outperform their micro and nano counterparts. This review examines the advantages and disadvantages of ACs and summarises the advancement of ACs in the electrocatalytic synthesis of ammonia and urea. The focus is on two types of AC - single-atom catalysts (SACs) and diatom catalysts (DACs). SACs offer various advantages, including the 100% atom utilization that allows for low material mass loading, suppression of competitive reactions such as hydrogen evolution reaction (HER), and alternative reaction pathways allowing for efficient synthesis of ammonia and urea. DACs inherit these advantages, possessing further benefits of synergistic effects between the two catalytic centers at close proximity, particularly matching the NN bond for N2 reduction and boosting C-N coupling for urea synthesis. DACs also possess the ability to break the linear scaling relation of adsorption energy of reactants and intermediates, allowing for tuning of intermediate adsorption energies. Finally, possible future research directions using ACs are proposed.

Fluorine Domains Induced Ultrahigh Nitrogen Solubility in Ionic Liquids

Fluorinated ionic liquids (ILs) are well-known as electrolytes in the nitrogen (N2) electroreduction reaction due to their exceptional gas solubility. However, the influence of fluorinated functional group on N2 solvation and solubility enhancement remains unclear. Massive molecular dynamics simulations and free energy perturbation methods are conducted to investigate the N2 solubility in 11 traditional and 9 fluorinated ILs. It shows that the fluorinated IL of 1-Ethyl-3-methylimidazolium tris(pentafluoroethyl) trifluorophosphate ([Emim]FAP) exhibits ultrahigh solubility, 4.844 × 10-3, approximately 118 times higher than that of traditional IL 1-Ethyl-3-methylimidazolium nitrate ([Emim]NO3). Moreover, fluorinated ILs with more than 10 C-F bonds possess higher N2 solubility than others and show an exothermic nature during solvation. As the C-F bonds number in ILs decreases, the N2 solubility decreases significantly and displays the opposite endothermic behavior. To understand the ultrahigh N2 solubility in fluorinated ILs, we propose a concept of fluorine densification energy (FDE), referring to the average strength of interaction between atoms per unit volume in ILs with fluorine domains, demonstrating a linear relationship with C-F bonds. Physically, lower FDE results in lower N2-anion pair dissociation energy and higher free volume, finally enhancing the N2 solubility. Consequently, medium to long alkyl fluorine tails within a polar environment defines a distinct fluorine domain, emphasizing FDE's role in enhancing N2 solubility. Overall, these quantitative results will not only deepen the understanding of N2 solvation in ILs but may also shed light on the rational design of IL-based high-performance N2 capture and conversion technologies.

Ti-doped iron phosphide nanoarrays grown on carbon cloth as a self-supported electrode for enhanced electrocatalytic nitrogen reduction

The electrocatalytic nitrogen reduction reaction (eNRR) has been widely recognized as a promising method for green ammonia synthesis. However, the inert NN bond, inferior catalytic activity and small electrochemically active area impede its practical application. To circumvent these problems, we proposed self-supported Ti-doped iron phosphide (FeP) nanorod arrays grown on carbon cloth (Ti-FeP/CC) as an electrode for eNRR. The introduction of Ti doping sites regulated the electron structure of FeP, leading to electron migration from Fe to P, which facilitated N2-to-NH3 conversion. The as-prepared Ti-FeP/CC showed an enhancement of electrochemical surface area (ECSA), high electrical conductivity and well-exposed active sites. Ti-FeP/CC was capable of producing a high NH3 yield of 10.93 μg h-1 cm-2 and faradaic efficiency of 10.77% at an optimal voltage of -0.3 V (vs. RHE) in a 0.1 M Na2SO4 solution with excellent stability and durability during the eNRR process. This work not only presents a promising electrode material for eNRR, but also provides a new insight into rational heteroatom doping for electrocatalysis.

Metal-Based Electrocatalysts for Selective Electrochemical Nitrogen Reduction to Ammonia

Ammonia (NH3) plays a significant role in the manufacture of fertilizers, nitrogen-containing chemical production, and hydrogen storage. The electrochemical nitrogen reduction reaction (e-NRR) is an attractive prospect for achieving clean and sustainable NH3 production, under mild conditions driven by renewable energy. The sluggish cleavage of N≡N bonds and poor selectivity of e-NRR are the primary challenges for e-NRR, over the competitive hydrogen evolution reaction (HER). The rational design of e-NRR electrocatalysts is of vital significance and should be based on a thorough understanding of the structure-activity relationship and mechanism. Among the various explored e-NRR catalysts, metal-based electrocatalysts have drawn increasing attention due to their remarkable performances. This review highlighted the recent progress and developments in metal-based electrocatalysts for e-NRR. Different kinds of metal-based electrocatalysts used in NH3 synthesis (including noble-metal-based catalysts, non-noble-metal-based catalysts, and metal compound catalysts) were introduced. The theoretical screening and the experimental practice of rational metal-based electrocatalyst design with different strategies were systematically summarized. Additionally, the structure-function relationship to improve the NH3 yield was evaluated. Finally, current challenges and perspectives of this burgeoning area were provided. The objective of this review is to provide a comprehensive understanding of metal-based e-NRR electrocatalysts with a focus on enhancing their efficiency in the future.

Recent advances on surface mounted metal-organic frameworks for energy storage and conversion applications: Trends, challenges, and opportunities

Establishing green and reliable energy resources is very important to counteract the carbon footprints and negative impact of non-renewable energy resources. Metal-organic frameworks (MOFs) are a class of porous material finding numerous applications due to their exceptional qualities, such as high surface area, low density, superior structural flexibility, and stability. Recently, increased attention has been paid to surface mounted MOFs (SURMOFs), which is nothing but thin film of MOF, as a new category in nanotechnology having unique properties compared to bulk MOFs. With the advancement of material growth and synthesis technologies, the fine tunability of film thickness, consistency, size, and geometry with a wide range of MOF complexes is possible. In this review, we recapitulate various synthesis approaches of SURMOFs including epitaxial synthesis approach, direct solvothermal method, Langmuir-Blodgett LBL deposition, Inkjet printing technique and others and then correlated the synthesis-structure-property relationship in terms of energy storage and conversion applications. Further the critical assessment and current problems of SURMOFs have been briefly discussed to explore the future opportunities in SURMOFs for energy storage and conversion applications.

Electrochemical Nitrogen Fixation for Green Ammonia: Recent Progress and Challenges

Ammonia, a key feedstock used in various industries, has been considered a sustainable fuel and energy storage option. However, NH3 production via the conventional Haber-Bosch process is costly, energy-intensive, and significantly contributing to a massive carbon footprint. An electrochemical synthetic pathway for nitrogen fixation has recently gained considerable attention as NH3 can be produced through a green process without generating harmful pollutants. This review discusses the recent progress and challenges associated with the two relevant electrochemical pathways: direct and indirect nitrogen reduction reactions. The detailed mechanisms of these reactions and highlight the recent efforts to improve the catalytic performances are discussed. Finally, various promising research strategies and remaining tasks are presented to highlight future opportunities in the electrochemical nitrogen reduction reaction.

Advances in Spin Catalysts for Oxygen Evolution and Reduction Reactions

Searching for high effective catalysts has been an endless effort to improve the efficiency of green energy harvesting and degradation of pollutants. In the past decades, tremendous strategies are explored to achieve high effective catalysts, and various theoretical understandings are proposed for the improved activity. As the catalytic reaction occurs at the surface or edge, the unsaturated ions may lead to the fluctuation of spin. Meanwhile, transition metals in catalysts have diverse spin states and may yield the spin effects. Therefore, the role of spin or magnetic moment should be carefully examined. In this review, the recent development of spin catalysts is discussed to give an insightful view on the origins for the improved catalytic activity. First, a brief introduction on the applications and advances in spin-related catalytic phenomena, is given, and then the fundamental principles of spin catalysts and magnetic fields-radical reactions are introduced in the second part. The spin-related catalytic performance reported in oxygen evolution/reduction reaction (OER/ORR) is systematically discussed in the third part, and general rules are summarized accordingly. Finally, the challenges and perspectives are given. This review may provide an insightful understanding of the microscopic mechanisms of catalytic phenomena and guide the design of spin-related catalysts.

In silico design of single transition metal atom anchored defective boron carbide monolayers as high-performance electrocatalysts for the nitrogen reduction reaction

Development of low-cost and high-efficiency single atom catalysts (SACs) is essential for catalyzing nitrogen reduction reactions (NRR) under ambient conditions. Current SACs suffer from low selectivity and poor activity, making it hard for them to meet the requirements of industrial applications. Here, we present a graphene-like BC₃ monolayer as a substrate for single metal atoms. The catalytic performance of 4d and 5d metal atoms anchored in a vacancy containing BC₃ monolayer for NRR is systematically investigated by first-principles calculations. We find that Re@V_B is outstanding among all candidates, exhibiting high catalytic activity and selectivity, with a low limiting potential of -0.28 V. A new descriptor involving the active site and its environment is proposed, which has a volcano relationship with several factors in the catalytic process, establishing a link between the intrinsic properties of the active site and the catalytic performance. This study opens a new route to designing efficient catalysts with BC₃ as a substrate.

Electrochemical Nitrogen Reduction to Ammonia Under Ambient Conditions: Stakes and Challenges

Aqueous electrochemical nitrogen reduction (ENR) to ammonia (NH₃ ) under ambient conditions is considered as an alternative to the energy-intensive Haber-Bosch process for ammonia production. Many metal, non-metal, carbon-based materials along with metal-chalcogenides, metal-nitrides have been explored for their ENR activity. The reported NH₃ production through ENR is still in the micro-gram level and often falls in the range of NH₃ and NO_x contaminations from the surrounding. The quantification of NH₃ at very low concentration possess enormous challenge in this field and thus many reported ENR electrocatalysts suffer from reproducibility issue. This review highlights in detail the challenges associated with ENR in aqueous medium and necessitates standardization of protocols to quantify the low concentration of NH₃ free of false-positives. It concludes the prospects of electrochemical NH₃ production through lithium-mediated N₂ reduction.

Electrodeposition: An efficient method to fabricate self-supported electrodes for electrochemical energy conversion systems

The development of electrocatalysts for energy conversion systems is essential for alleviating environmental problems and producing useful energy sources as alternatives to fossil fuels. Improving the catalytic performance and stability of electrocatalysts is a major challenge in the development of energy conversion systems. Moreover, understanding their electrode structure is important for enhancing the energy efficiency. Recently, binder-free self-supported electrodes have been investigated because the seamless contact between the electrocatalyst and substrate minimizes the contact resistance as well as facilitates fast charge transfer at the catalyst/substrate interface and high catalyst utilization. Electrodeposition is an effective and facile method for fabricating self-supported electrodes in aqueous solutions under mild conditions. Facile fabrication without a polymer binder and controlability of the compositional and morphological properties of the electrocatalyst make electrodeposition methods suitable for enhancing the performance of energy conversion systems. Herein, we summarize recent research on self-supported electrodes fabricated by electrodeposition for energy conversion reactions, particularly focusing on cathodic reactions of electrolyzer system such as hydrogen evolution, electrochemical CO2 reduction, and electrochemical N2 reduction reactions. The deposition conditions, morphological and compositional properties, and catalytic performance of the electrocatalyst are reviewed. Finally, the prospective directions of electrocatalyst development for energy conversion systems are discussed.

Tetrahedral W4cluster confined in graphene-like C2N enables electrocatalytic nitrogen reduction from theoretical perspective

Exploring the format of active site is essential to further the understanding of an electrocatalyst working under ambient conditions. Herein, we present a DFT study of electrocatalytic nitrogen reduction (eNRR) on W₄tetrahedron embedded in graphene-like C₂N (denoted as W₄@C₂N). Our results demonstrate that N-affinity of active sites on W₄dominate over single-atom site, rendering *NH₂ + (H⁺ + e^-) →*NH₃invariably the potential-determining step (PDS) of eNRR via consecutive or distal route (U_L = -0.68 V) to ammonia formation. However, *NHNH₂ + (H⁺ + e^-) →*NH₂NH₂has become the PDS (U_L = -0.54 V) via enzymatic route towards NH₂NH₂formation and thereafter desorption, making W₄@C₂N a potentially promising catalyst for hydrazine production from eNRR. Furthermore, eNRR is competitive with hydrogen evolution reaction (U_L = -0.78 V) on W₄@C₂N, which demonstrated sufficient thermal stability and electric property for electrode application.

Progress in Mo/W-based electrocatalysts for nitrogen reduction to ammonia under ambient conditions

Ammonia (NH₃), possessing high hydrogen content and energy density, has been widely employed for fertilizers and value-added chemicals in green energy carriers and fuels. However, the current NH₃ synthesis largely depends on the traditional Haber-Bosch process, which needs tremendous energy consumption and generates greenhouse gas, resulting in severe energy and environmental issues. The electrochemical strategy of converting N₂ to NH₃ under mild conditions is a potentially promising route to realize an environmentally friendly concept. Among various catalysts, molybdenum/tungsten-based electrocatalysts have been widely used in electrochemical catalytic and energy conversion. This review describes the latest progress of molybdenum/tungsten-based electrocatalysts for the electrochemical nitrogen reduction reaction. The fundamental roles of morphology, doping, defects, heterojunction, and coupling regulation in improving electrocatalytic performance are mainly discussed. Besides, some tailoring strategies for enhancing the conversion efficiency of N₂ to NH₃ over Mo/W-based electrocatalysts are also summarized. Finally, the existing challenges and limitations of N₂ fixation are proposed, as well as possible future perspectives, which will provide a platform for further development of advanced Mo/W-based N₂ reduction systems.

Electrocatalytic Reduction of Nitrogen to Ammonia: the Roles of Lattice O and N in Reduction at Vanadium Oxynitride Surfaces

Vanadium oxynitride and other earth-abundant oxynitrides are of growing interest for the electrocatalytic reduction of nitrogen to NH₃. A major unresolved issue, however, concerns the roles of lattice N and lattice O in this process. Electrochemistry and photoemission data reported here demonstrate that both lattice N and dissolved N₂ are reduced to NH₃ by cathodic polarization of vanadium oxynitride films at pH 7. These data also show that ammonia production from lattice N occurs in the presence or absence of N₂ and involves the formation of V≡N: intermediates or similar unsaturated VN surface states on a thin vanadium oxide overlayer. In contrast, N₂ reduction proceeds in the presence or absence of lattice N and without N incorporation into a vanadium oxide lattice. Thus, both lattice N and N₂ reduction mechanisms involve oxide-supported V surface sites ([V]_O) in preference to N-supported sites ([V]_N). This result is supported by density functional theory-based calculations showing that the formation of V≡N:, V-N═N-H, and a few other plausible reaction intermediates is consistently energetically favored at [V]_O rather than at [V]_N surface sites. Similar effects are predicted for the oxynitrides of other oxophilic metals, such as Ti.

Single-, double-, and triple-atom catalysts on graphene-like C2N enable electrocatalytic nitrogen reduction: insight from first principles

The *NHx intermediates on Mn@C2N are highly stable for n = 3 and unstable for n = 1, rendering Mn@C2N as the optimal candidate for driving the eNRR owing to its moderate binding with NHx (x = 0, 1, 2, 3).

Nanocarbon for Energy Material Applications: N2 Reduction Reaction

Nanocarbons are an important class of energy materials and one relevant application is for the nitrogen reduction reaction, i.e., the direct synthesis of NH₃ from N₂ and H₂ O via photo- and electrocatalytic approaches. Ammonia is also a valuable energy or hydrogen vector. This perspective paper analyses developments in the field, limiting discussion to nanocarbon-based electrodes. These aspects are discussed: i) active sites related to charge density differences on C atoms associated to defects/strains, ii) doping with heteroatoms, iii) introduction of isolated metal ions, iv) creation and in situ dynamics of metal oxide(hydroxide)/nanocarbon boundaries, and v) nanocarbon characteristics to control the interface. Discussion is focused on the performances and mechanistic aspects. Aim is not a systematic state-of-the-art report but to highlight the need to use a different perspective in studying this challenging reaction by using selected papers. Notwithstanding the large differences in the proposed nature of the active sites, fall all within a restricted range of performances, far from the targets. A holistic approach is emphasized to make a breakthrough advance.

Computational Screening of First-Row Transition-Metal Based Alloy Catalysts-Ligand Induced N2 Reduction Reaction Selectivity

Large-scale ammonia production through sustainable strategies from naturally abundant N₂ under ambient conditions represents a major challenge from a future perspective. Ammonia is one of the promising carbon-free alternative energy carriers. The high energy required for N≡N bond dissociation during the Haber-Bosch process demands extreme reaction conditions. This problem could be circumvented by tuning Fe catalyst composition with the help of an induced ligand effect on the surface. In this work, we utilized density functional theory calculations on the Fe(110) surface alloyed with first-row transition-metal (TM) series (Fe-TM) to understand the catalytic activity that facilitates the electrochemical nitrogen reduction reaction (NRR). We also calculated the selectivity against the competitive hydrogen evolution reaction (HER) under electrochemical conditions. The calculated results are compared with those from earlier reports on the periodic Fe(110) and Fe(111) surfaces, and also on the (110) surface of the Fe₈₅ nanocluster. Surface alloying with late TMs (Co, Ni, Cu) shows an improved NRR activity, whereas the low exchange current density observed for Fe-Co indicates less HER activity among them. Considering various governing factors, Fe-based alloys with Co (Fe-Co) showed enhanced overall performance compared to the periodic surface as well as other pure iron-based structures previously reported. Therefore, the iron-alloy based structured catalysts may also provide more opportunities in the future for enhancing NRR performance via electrochemical reduction pathways.

Heterojunction-based photocatalytic nitrogen fixation: principles and current progress

Nitrogen fixation is considered one of the grand challenges of the 21st century for achieving the ultimate vision of a green and sustainable future. It is crucial to develop and design sustainable nitrogen fixation techniques with minimal environmental impact as an alternative to the energy-cost intensive Haber-Bosch process. Heterojunction-based photocatalysis has recently emerged as a viable solution for the various environmental and energy issues, including nitrogen fixation. The primary advantages of heterojunction photocatalysts are spatially separated photogenerated charge carriers while retaining high oxidation and reduction potentials of the individual components, enabling visible light-harvesting. This review summarises the fundamental principles of photocatalytic heterostructures, the reaction mechanism of the nitrogen reduction reaction, ammonia detection methods, and the current progress of heterostructured photocatalysts for nitrogen fixation. Finally, future challenges and prospects are briefly discussed for the emerging field of heterostructured photocatalytic nitrogen fixation.

Lithium-mediated electrochemical nitrogen reduction: Mechanistic insights to enhance performance

Green synthesis of ammonia by electrochemical nitrogen reduction reaction (NRR) shows great potential as an alternative to the Haber-Bosch process but is hampered by sluggish production rate and low Faradaic efficiency. Recently, lithium-mediated electrochemical NRR has received renewed attention due to its reproducibility. However, further improvement of the system is restricted by limited recognition of its mechanism. Herein, we demonstrate that lithium-mediated NRR began with electrochemical deposition of lithium, followed by two chemical processes of dinitrogen splitting and protonation to ammonia. Furthermore, we quantified the extent to which the freshly deposited active lithium lost its activity toward NRR due to a parasitic reaction between lithium and electrolyte. A high ammonia yield of 0.410 ± 0.038 μg s^-1 cm^-2 geo and Faradaic efficiency of 39.5 ± 1.7% were achieved at 20 mA cm^-2 geo and 10 mA cm^-2 geo, respectively, which can be attributed to fresher lithium obtained at high current density.

Bi2O3 nanosheets arrays in-situ decorated on carbon cloth for efficient electrochemical reduction of nitrate

Excessive nitrate in industrial wastewater is still an important environmental protection issue for human beings. As nitrate promoter metal, Sn has been extensively studied in nitrate reduction reaction (NITRR). However, it suffers from high selectivity of nitrite as the final product at times. As the same main group as Sn, bismuth-based materials have exhibited excellent performance in the field of electrochemical reduction reactions but were rarely investigated for NITRR. In this study, Bi₂O₃ nanosheets in-situ decorated on carbon cloth (Bi₂O₃-CC) was synthesized and it showed larger surface area and higher electrical conductivity than those of dropped Bi₂O₃ nanosheets onto carbon cloth (Bi₂O₃/CC). Experimental results show that the nitrate removal efficiency of Bi₂O₃-CC increased by 12.7% than that of Bi₂O₃/CC at the same condition. Besides, the presence of Cl^- benefits the NITRR process since the reaction of Bi₂O₃ and Cl^- in acidic conditions can accelerate the conversion of Bi³⁺ to Bi⁰. The mechanism of the NITRR process was proposed based on the electrochemical and scavenging experiments. It was found that both the direct electron transfer and atomic H∗ contribute to the electrochemical reduction of nitrate to ammonia. More importantly, when Bi₂O₃-CC was applied to actual garbage fly ash wastewater, most nitrates were converted to ammonia. The designed Bi₂O₃-CC is a high-potential material for converting nitrate in industrial wastewater to valuable feedstock chemical ammonia with high efficiency.

Optically and Electrocatalytically Decoupled Si Photocathodes with a Porous Carbon Nitride Catalyst for Nitrogen Reduction with Over 61.8% Faradaic Efficiency

The photoelectrochemical (PEC) approach is attractive as a promising route for the nitrogen reduction reaction (NRR) toward ammonia (NH₃ ) synthesis. However, the challenges in synergistic management of optical, electrical, and catalytic properties have limited the efficiency of PEC NRR devices. Herein, to enhance light-harvesting, carrier separation/transport, and the catalytic reactions, a concept of decoupling light-harvesting and electrocatalysis by employing a cascade n⁺ np⁺ -Si photocathode is implemented. Such a decoupling design not only abolishes the parasitic light blocking but also concurrently improves the optical and electrical properties of the n⁺ np⁺ -Si photocathode without compromising the efficiency. Experimental and density functional theory studies reveal that the porous architecture and N-vacancies promote N₂ adsorption of the Au/porous carbon nitride (PCN) catalyst. Impressively, an n⁺ np⁺ -Si photocathode integrating the Au/PCN catalyst exhibits an outstanding PEC NRR performance with maximum Faradaic efficiency (FE) of 61.8% and NH₃ production yield of 13.8 µg h^-1 cm^-2 at -0.10 V versus reversible hydrogen electrode (RHE), which is the highest FE at low applied potential ever reported for the PEC NRR.

Proton conducting membranes for hydrogen and ammonia production

Dense proton conducting membranes possess 100% hydrogen selectivity and excellent stability under practical conditions, and serve as promising technologies for hydrogen and ammonia production.

Comparing Molecular Mechanisms in Solar NH3 Production and Relations with CO2 Reduction

Molecular mechanisms for N2 fixation (solar NH3) and CO2 conversion to C2+ products in enzymatic conversion (nitrogenase), electrocatalysis, metal complexes and plasma catalysis are analyzed and compared. It is evidenced that differently from what is present in thermal and plasma catalysis, the electrocatalytic path requires not only the direct coordination and hydrogenation of undissociated N2 molecules, but it is necessary to realize features present in the nitrogenase mechanism. There is the need for (i) a multi-electron and -proton simultaneous transfer, not as sequential steps, (ii) forming bridging metal hydride species, (iii) generating intermediates stabilized by bridging multiple metal atoms and (iv) the capability of the same sites to be effective both in N2 fixation and in COx reduction to C2+ products. Only iron oxide/hydroxide stabilized at defective sites of nanocarbons was found to have these features. This comparison of the molecular mechanisms in solar NH3 production and CO2 reduction is proposed to be a source of inspiration to develop the next generation electrocatalysts to address the challenging transition to future sustainable energy and chemistry beyond fossil fuels.

The synthetic strategies for single atomic site catalysts based on metal-organic frameworks

Metal-organic frameworks (MOFs) are a good platform for the fabrication of single atomic site catalysts (SACs) due to their large specific surface area, rich pore structure, large number of unsaturated coordination metal sites and their intriguing and controllable structures. The influencing factors of each strategy used to synthesize SACs based on MOFs, such as the finetuning ligand strategy, heteroatom doping (N, P, S) strategy, space restriction strategy, bimetallic strategy, metal cluster defect strategy, substrate to capture strategy, and various post-treatment strategies have not been discussed. Here, we will discuss the influencing factors of each strategy and the relationship between the different methods, which are used to synthesize SACs based on MOFs.

Plasma modification of vanadium oxynitride surfaces: Characterization by in situ XPS experiments and DFT calculations

Plasma modification of transition metal nitride/oxynitride (MO_xN_y) surfaces for enhanced surface properties is highly desirable, given the scalability of such methods and limitations of thermal treatments. In situ x-ray excited photoelectron spectroscopy demonstrates that the O₂ plasma oxidation of VO_xN_y films generates non-lattice N1s surface features with binding energies near 396.5 eV, which are associated with the nitrogen reduction reaction activity but not observed upon thermal oxidation. The NH₃ plasma generates N1s surface features near 400.5 eV binding energy. The O₂+NH₃ plasma generates both types of N1s features. Annealing in UHV to <1000 K reverses plasma-induced changes to N1s spectra. Density functional theory (DFT) calculations integrated with the experiments indicate that the plasma-induced N1s features at ∼396.5 eV and 400.5 eV are V≡N: and V-NH₂ sites, respectively, with significantly lower thermal stabilities than lattice N sites. These results provide practical insight regarding the plasma modification of MO_xN_y surfaces for important applications.

Structural evolution of CrN nanocube electrocatalysts during nitrogen reduction reaction

Metal nitrides have been suggested as prospective catalysts for the electrochemical nitrogen reduction reaction (NRR) in order to obtain ammonia at room temperature under ambient pressure. Herein, we report that templated chromium nitride porous microspheres built up by nanocubes (NCs) are an efficient noble-metal-free electrocatalyst for NRR. The CrN NCs catalyst exhibits both a high stability and NH3 yield of 31.11 μg h-1 mgcat.-1 with a Faradaic efficiency (FE) of 16.6% in 0.1 M HCl electrolyte. Complementary physical characterization techniques demonstrate partial oxidation of the pristine CrN NCs during reaction. Structural characterization by means of scanning transmission electron microscopy (STEM) combining electron energy loss spectrum (EELS) and energy dispersive X-ray spectroscopy (EDX) analysis reveals the NC structure to consist of an O-rich core and N-rich shell after NRR. This gradient distribution of nitrogen within the CrN NCs upon completed NRR is distinct to previously reported metal nitride NRR catalysts, because no significant loss of nitrogen occurs at the catalyst surface.

Current Progress of Electrocatalysts for Ammonia Synthesis Through Electrochemical Nitrogen Reduction Under Ambient Conditions

Ammonia, one of the most important chemicals and carbon-free energy carriers, is mainly produced by the traditional Haber-Bosch process operated at high pressure and temperature, which results in massive energy consumption and CO2 emissions. Alternatively, the electrocatalytic nitrogen reduction reaction to synthesize NH3 under ambient conditions using renewable energy has recently attracted significant attention. However, the competing hydrogen evolution reaction (HER) significantly reduces the faradaic efficiency and NH3 production rate. The design of high-performance electrocatalysts with the suppression of the HER for N2 reduction to NH3 under ambient conditions is a crucial consideration for the development of electrocatalytic NH3 synthesis with high FE and NH3 production rate. Five kinds of recently developed electrocatalysts classified by their chemical compositions are summarized, with particular emphasis on the relationship between their optimal electrocatalytic conditions and NH3 production performance. Conclusions and perspectives are provided for the future design of high-performance electrocatalysts for electrocatalytic NH3 production. The Review can give practical guidance for the design of effective electrocatalysts with high FE and NH3 production rates.

Surface-coordinated metal-organic framework thin films (SURMOFs) for electrocatalytic applications

The design and development of highly efficient electrocatalysts are very important in energy storage and conversion. As a kind of inorganic organic hybrid material, metal-organic frameworks (MOFs) have been used as electrocatalysts in electrocatalytic reactions due to their structural diversities and fascinating functionalities. Particularly, MOF thin films are coordinated on substrate surfaces by a liquid phase epitaxial (LPE) layer by layer (LBL) growth method (called surface-coordinated MOF thin films, SURMOFs), and recently have been studied in various applications due to their precisely controlled thickness, preferred growth orientation and homogeneous surface. In this review, we will summarize the preparation and electrocatalysis of SURMOFs and their derived thin films (SURMOF-D). The SURMOF based thin films possess diverse topological structures and flexible properties, providing abundant catalytically active sites and fast charge transfer for efficient electrocatalytic performance in the oxygen evolution reaction (OER), oxygen reduction reaction (ORR), hydrogen evolution reaction (HER), carbon dioxide reduction reaction (CRR), supercapacitors, tandem electrocatalysis and so on. The research challenges and problems of SURMOFs for electrocatalytic applications are also discussed at the end of the review.