Construction of tetrahedral CoO4 vacancies for activating the high oxygen evolution activity of Co3-xO4-δ porous nanosheet arrays

Synthesis of Co@CoO/C by micro-tube method and their electrochemical performances

Lithium-ion batteries (LIBs) are promising secondary batteries that are widely used in portable electronic devices, electric vehicles and smart grids. The design and synthesis of high-performance electrode materials play a crucial role in achieving lithium-ion batteries with high energy density, prolonged cycle life, and superior safety. CoO has attracted significant attention as a negative electrode material for lithium-ion batteries due to its high theoretical capacity and abundant resources. However, its limited conductivity and suboptimal cycling performance impede its potential applications. The study proposes a novel micro-tube reaction method for the synthesis of Co@CoO/C, utilizing Kapok fiber as a template with a special hollow structure. The microstructure and composition of the samples were characterized using X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). After conducting electrochemical performance tests, it was discovered that at a current density of 100 mA/g and within the range of 0.01-3.0 V for 50 charge and discharge cycles. Co@CoO/C composite negative electrode exhibits a reversible lithium insertion specific capacity of 499.8 mAh/g and keep a discharge capacity retention rate of 97.6 %. The greatly improved lithium storage and stability performance of Co@CoO/C composite anode is mainly attributed to the synergistic effect between Co@CoO nanoparticles and the kapok carbon microtubule structure.

Transforming the Electrochemical Behaviors of Cobalt Oxide from "Supercapacitator" to "Battery" by Atomic-Level Structure Engineering for Inspiring the Advance of Co-Based Batteries

Cobalt-based electrodes receive emerging attention for their high theoretical capacity and rich valence variation ability, but state-of-the-art cobalt-based electrodes present performance far below the theoretical value. Herein, the in-depth reaction mechanisms in the alkaline electrolyte are challenged and proven to be prone to the surface-redox pseudocapacitor behavior due to the low adsorption energy to OH. Using the atomic-level structure engineering strategy after substitution metal searching, the adsorption energy is effectively enhanced, and the peak of CoOOH can be observed from in situ characterization for the first time, leading to the successful transition of charge storage behavior from "supercapacitor" to "battery". When used in a Zn-Co battery as a proof of concept, it shows comprehensive electrochemical performance with a flat discharge voltage plateau of ≈1.7 V, an optimal energy density of 506 Wh kg^-1 , and a capacity retention ratio of 85.1% after 2000 cycles, shining among the reported batteries. As a practical demonstration, this battery also shows excellent self-discharge performance with the capacity retention of 90% after a 10 h delay. This work subtly tunes the intrinsic electrochemical properties of the cobalt-based material through atomic-level structure engineering, opening a new opportunity for the advance of energy storage systems.

Coordination-Controlled Catalytic Activity of Cobalt Oxides for Ozone Decomposition

Nowadays, it is still elusive and challenging to discover the active sites of cobalt (Co) cations in different coordination structures, though Co-based oxides show their great potency in catalytic ozone elimination for air cleaning. Herein, different Co-based oxides are controllably synthesized including hexagonal wurtzite CoO-W with Co²⁺ in tetrahedral coordination (Co_Td²⁺) and CoAl spinel with dominant Co_Td²⁺, cubic rock salt CoO-R with Co²⁺ in octahedral coordination (Co_Oh²⁺), MgCo spinel with dominant Co³⁺ in octahedral coordination (Co_Oh³⁺), and Co₃O₄ with mixed Co_Td²⁺ and Co_Oh³⁺. The valences are proved by X-ray photoelectron spectroscopy, and the coordinations are verified by X-ray absorption fine structure analysis. The ozone decomposition performances are Co_Oh³⁺ ∼ Co_Oh²⁺ ≫ Co_Td²⁺, and Co_Oh³⁺ and Co_Oh²⁺ show a lower apparent activation energy of ∼42-44 kJ/mol than Co_Td²⁺ (∼55 kJ/mol). In specific, MgCo shows the highest decomposition efficiency of 95% toward 100 ppm ozone at a high space velocity of 1,200,000 mL/gh, which still retains at 80% after a long-term running of 36 h at room temperature. The high activity is explained by the d-orbital splitting in the octahedral coordination, favoring the electron transfer in ozone decomposition reactions, which is also verified by the simulation. These results show the promising prospect of the coordination tuning of Co-based oxides for highly active ozone decomposition catalysts.

Rapidly reconstructing the active surface of cobalt-based perovskites for alkaline seawater splitting

As a potential oxygen evolution reaction (OER) catalyst, Co-based perovskites have received intensive attention. However, Sr readily accumulates on their surface, and makes them inert toward the OER. Herein, we propose a simple but versatile electrochemical reduction method to reconstruct the active surface of Co-based perovskites within a few seconds. By this method, Sr rapidly precipitates from Co-based perovskites, accompanied by the introduction of Sr and oxygen vacancies. After reconstruction, the electrochemical active surface areas of Co-based perovskites greatly increase, and the OER overpotential of the optimized SrNb_0.1Co_0.7Fe_0.2O_3-δ (ER-SNCF-20s) reaches 278 mV at 10 mA cm^-2. This can be explained by the decrease of overpotentials at the rate-determining step. Using ER-SNCF-20s, the splitting voltage of alkaline natural seawater can reach 1.56 V at 10 mA cm^-2, and remains steady for 300 h. This effort offers a feasible method for reconstructing the active surface of Co-based perovskites.

Boosting photoelectrochemical activity of bismuth vanadate by implanting oxygen-vacancy-rich cobalt (oxy)hydroxide

Surface charge recombination is regarded as a detrimental factor that severely downgrades the photoelectrochemical (PEC) performance of bismuth vanadate (BiVO₄). In this work, we demonstrate defect-rich cobalt (oxy)hydroxides (Co(O)OH) as an excellent cocatalyst nanolayer sheathed on BiVO₄ to substantially improve the PEC water oxidation activity. The self-transformation of metal-organic framework produces an ultrathin Co(O)OH layer rich in oxygen vacancies, which could serve as a powerful hole extraction engine to promote the charge transfer/separation efficiency as well as an excellent oxygen evolution reaction catalyst to accelerate the surface water oxidation kinetics. As a result, the BiVO₄/Co(O)OH hybrid photoanode achieves remarkably inhibited surface charge recombination and presents a prominent photocurrent density of 4.2 mA cm^-2 at 1.23 V vs. RHE, which is around 2.6-fold higher than that of the pristine BiVO₄. Moreover, the Co(O)OH cocatalyst nanolayer significantly reduces the onset potential of BiVO₄ photoanodes by 200 mV. This work provides a versatile strategy for rationally preparing oxygen-vacancy-rich cocatalysts on various photoanodes toward high-efficient PEC water oxidation.

Advanced Transition Metal-Based OER Electrocatalysts: Current Status, Opportunities, and Challenges

Oxygen evolution reaction (OER) is an important half-reaction involved in many electrochemical applications, such as water splitting and rechargeable metal-air batteries. However, the sluggish kinetics of its four-electron transfer process becomes a bottleneck to the performance enhancement. Thus, rational design of electrocatalysts for OER based on thorough understanding of mechanisms and structure-activity relationship is of vital significance. This review begins with the introduction of OER mechanisms which include conventional adsorbate evolution mechanism and lattice-oxygen-mediated mechanism. The reaction pathways and related intermediates are discussed in detail, and several descriptors which greatly assist in catalyst screen and optimization are summarized. Some important parameters suggested as measurement criteria for OER are also mentioned and discussed. Then, recent developments and breakthroughs in experimental achievements on transition metal-based OER electrocatalysts are reviewed to reveal the novel design principles. Finally, some perspectives and future directions are proposed for further catalytic performance enhancement and deeper understanding of catalyst design. It is believed that iterative improvements based on the understanding of mechanisms and fundamental design principles are essential to realize the applications of efficient transition metal-based OER electrocatalysts for electrochemical energy storage and conversion technologies.

Designing of Highly Efficient Oxygen Evolution Reaction Electrocatalysts Utilizing A Correlation Factor: Theory and Experiment

The theoretical prediction of the catalytic activity is very beneficial for the design of highly efficient catalysts. At present, most theoretical descriptors focus on estimating the catalytic activity and understanding the enhancement mechanism of catalysts, while it is also quite important to find a factor to correlate the descriptors with preparation methods. In this work, a correlation factor, the d electron density of transition metal ions, was developed to correlate the d band center values of transition metal ions with the preparation methods of amorphization and Al introduction. According to the results of theoretical simulations, the correlation factor not only exhibited favorable linear relationships with the theoretical overpotentials of (CoFeAl_x)₃O₄ and (CoFeAl_x)₃O₄ + (CoFeAl_x)OOH systems but also correlated with two preparation methods by altering the volume of systems. Based on theoretical guidance, the electrocatalytic activities of the prepared (CoFeAl_x)₃O₄ specimens were gradually improved by the preparation methods of amorphization and Al introduction, and the Am-CoFeAl-2-10h specimen exhibited a low kinetic barrier of 268 mV, fast charge transfer rate, and stable electrocatalytic activity. This strategy could be applied to design highly efficient catalysts by adjusting the correlation factor of the active site with suitable preparation methods.

Rod-like nickel doped Co3Se4/reduced graphene oxide hybrids as efficient electrocatalysts for oxygen evolution reactions

In the oxygen evolution reaction (OER), highly active catalysts are essential for reducing the overpotential and improving the slow kinetics of the process. Cobalt selenide (Co₃Se₄) has always been considered as a promising electrocatalyst for the OER due to the well-suited electronic configuration of the Co ions in it. However, poor exposure of the active sites and low electron conductivity are still its biggest problems. In this study, we report an efficient Ni-doped rod-like Co₃Se₄ hybridized with reduced graphene oxide (Ni-Co₃Se₄/rGO) as an OER electrocatalyst. The Ni doping regulates the electronic structure of Co₃Se₄ and significantly reduces the overpotential of Co₃Se₄ toward the OER under alkaline conditions. Simultaneously, hybridization of the reduced graphene oxide (rGO) enhances the conductivity which leads to the improvement in OER activity. The Ni-Co₃Se₄/rGO catalyst shows a lower overpotential (284 mV at 10 mA cm^-2) as well as a Tafel slope (71 mV dec^-1), which outperformed the benchmark of commercial RuO₂. Moreover, Ni-Co₃Se₄/rGO also shows high stability and long-term durability.

Two dimensional ZIF-derived ultra-thin Cu-N/C nanosheets as high performance oxygen reduction electrocatalysts for high-performance Zn-air batteries

Bottom-up construction of transition copper-nitrogen-carbon (Cu-N-C) electrocatalysts with high-performance and long-term durability for the oxygen reduction reaction (ORR) still remains a great challenge. Herein, we propose a temperature-controlled synthesis strategy with confinement effect for fabrication of a novel two-dimensional dual-metal (Cu/Zn) zeolitic imidazolate framework material, which presents an ultrathin nanosheet morphology after high-temperature thermal treatment (denoted as Cu-N-UNS). By controlling the reaction temperature as well as regulating the ratio of metal ions and taking advantages of the confinement effect of surfactants, the rationally designed ultra-thin carbon layer not only prevents aggregation of transition Cu particles and avoids direct contact with reactants and electrolyte solutions to enhance the durability of electrocatalysts, but also shortens the electronic transmission path between the active transition metal species and carbon surface. Therefore, the electrocatalyst exhibits excellent electrocatalytic performance for the ORR (E1/2 ≈ 0.898 V), which is superior to those of state-of-the-art benchmark noble-metal electrocatalysts. Moreover, the even distribution of Cu-N-C and existence of N-Cu2+-Cu0 active sites make a great contribution to the electrocatalyst activity. Notably, the Cu-N-UNS used as air electrodes for Zn-air batteries also exhibits a high peak power density of ≈134.7 mW cm-2 at a current density of ≈231.9 mA cm-2 with remarkable durability.