One-step phosphating synthesis of CoP nanosheet arrays combined with Ni2P as a high-performance electrode for supercapacitors

Metal Phosphide Anodes in Sodium-Ion Batteries: Latest Applications and Progress

Sodium-ion batteries (SIBs), as the next-generation high-performance electrochemical energy storage devices, have attracted widespread attention due to their cost-effectiveness and wide geographical distribution of sodium. As a crucial component of the structure of SIBs, the anode material plays a crucial role in determining its electrochemical performance. Significantly, metal phosphide exhibits remarkable application prospects as an anode material for SIBs because of its low redox potential and high theoretical capacity. However, due to volume expansion limitations and other factors, the rate and cycling performance of metal phosphides have gradually declined. To address these challenges, various viable solutions have been explored. In this paper, the recent research progress of metal phosphide materials for SIBs is systematically reviewed, including the synthesis strategy of metal phosphide, the storage mechanism of sodium ions, and the application of metal phosphide in electrochemical aspects. In addition, future challenges and opportunities based on current developments are presented.

High-efficiency activated phosphorus-doped Ni2S3/Co3S4/ZnS nanowire/nanosheet arrays for energy storage of supercapacitors

Transition metal sulfides (TMS) have been considered as a promising group of electrode materials for supercapacitors as a result of their strong redox activity, but high volumetric strain of the materials during electrochemical reactions causes rapid structural collapse and severe capacity loss. Herein, we have synthesized phosphorus-doped (P-doped) Ni2S3/Co3S4/ZnS battery-type nanowire/nanosheet arrays as an advanced cathode for supercapacitor through a two-step process of hydrothermal and annealing treatments. The material has a one-dimensional nanowire/two-dimensional nanosheet-like coexisting microscopic morphology, which facilitates the exposure of abundant active centers and promotes the transport and migration of ions in the electrolyte, while the doping of P significantly enhances the conductivity of the electrode material. Simultaneously, the element phosphorus with similar atomic radii and electronegativity to sulfur may act as electron donors to regulate the electron distribution, thus providing more effective electrochemically active sites. In gratitude to the synergistic effect of microstructure optimization and electronic structure regulation induced by the doing of P, the P-Ni2S3/Co3S4/ZnS nanoarrays provide a superior capacity of 2716 F g-1 at 1 A/g, while the assembled P-Ni2S3/Co3S4/ZnS//AC asymmetric supercapacitor exhibits a high energy density of 48.2 Wh kg-1 at a power density of 800 W kg-1 with the capacity retention of 89 % after 9000 cycles. This work reveals a possible method for developing high-performance transition metal sulfide-based battery-like electrode materials for supercapacitors through microstructure optimization and electronic structure regulation.

Chitosan-based hollow nanofiber membranes with polyvinylpyrrolidone and polyvinyl alcohol for efficient removal and filtration of organic dyes and heavy metals

Due to their large specific surface area and numerous diffusion channels, hollow fibers are widely used in wastewater treatment. In this study, we successfully synthesized a chitosan (CS)/polyvinylpyrrolidone (PVP)/polyvinyl alcohol (PVA) hollow nanofiber membrane (CS/PVP/PVA-HNM) via coaxial electrospinning. This membrane demonstrated remarkable permeability and adsorption separation. Specifically, the CS/PVP/PVA-HNM had a pure water permeability of 4367.02 L·m^-2·h^-1·bar^-1. The hollow electrospun nanofibrous membrane exhibited a continuous interlaced nanofibrous framework structure with the extraordinary advantages of high porosity and high permeability. The rejection ratios of CS/PVP/PVA-HNM for Cu²⁺, Ni²⁺, Cd²⁺, Pb²⁺, malachite green (MG), methylene blue (MB) and crystal violet (CV) were 96.91 %, 95.29 %, 87.50 %, 85.13 %, 88.21 %, 83.91 % and 71.99 %, and the maximum adsorption capacities were 106.72, 97.46, 88.10, 87.81, 53.45, 41.43, and 30.97 mg·g^-1, respectively. This work demonstrates a strategy for the synthesis of hollow nanofibers, which provides a novel concept for the design and fabrication of highly efficient adsorption separation membranes.

Fabrication of nanosheet-assembled hollow copper-nickel phosphide spheres embedded in reduced graphene oxide texture for hybrid supercapacitors

Owing to their metalloid characteristics with high electrical conductivity, transition metal phosphides (TMPs) have attracted considerable research attention as prospective cathodes for hybrid supercapacitors. Unfortunately, they usually exhibit low rate performance as well as poor longevity, which does not meet the demands of hybrid supercapacitors. The nanocomposite constructed from reduced graphene oxide (rGO) and TMPs with a highly porous nature can effectively overcome the above-mentioned issues, greatly widening their utilization. In this work, we fabricated nanosheet-assembled hollow copper-nickel phosphide spheres (NH-CNPSs) by the controllable phosphatizing of copper-nickel-ethylene glycol (CN-EG) precursors. Then, porous NH-CNPSs were embedded in rGO texture (NH-CNPS-rGO) to form a unique porous nanoarchitecture. The obtained NH-CNPS-rGO has several advantages benefiting as the cathode electrode, such as (i) the hollow structure as well as porous nanosheets are conducive to fast electrolyte diffusion, (ii) the electrical conductivity of NH-CNPS is further enhanced when coupled with the rGO texture, hence promoting electron transfer in the whole structure, (iii) wrapping NH-CNPSs within the rGO texture endows the nanocomposite with much better structural stability, resulting in longer durability of the electrode, And (iv) the porous structures generated in the nanocomposite provide a perfect space for reducing the mass transfer resistance and accessing the electrolyte, thereby boosting the reaction kinetics. The tests demonstrated that the optimal NH-CNPS-rGO electrode revealed a capacity of up to 1075 C g^-1, a superior rate capacity, and exceptional longevity of 94.7%. Moreover, a hybrid supercapacitor (NH-CNPS-rGO‖AC) equipped with the NH-CNPS-rGO-cathode electrode and activated carbon (AC)-anode electrode represented a satisfactory energy density of 64 W h kg^-1 at 801 W kg^-1 and amazing longevity (91.8% retention after 13 000 cycles), which endorses the promising potential of NH-CNPS-rGO for high-efficiency supercapacitors. This research showcases an appropriate method to engineer hollow TMP-rGO nanocomposites as effective materials for supercapacitors.

Multimetallic transition metal phosphide nanostructures for supercapacitors and electrochemical water splitting

Transition metal phosphides (TMPs) have recently emerged as an important class of functional materials and been demonstrated to be outstanding supercapacitor electrode materials and catalysts for electrochemical water splitting. While extensive investigations have been devoted to monometallic TMPs, multimetallic TMPs have lately proved to show enhanced electrochemical performance compared to their monometallic counterparts, thanks to the synergistic effect between different transition metal species. This topical review summarizes recent advance in the synthesis of new multimetallic TMP nanostructures, with particular focus on their applications in supercapacitors and electrochemical water splitting. Both experimental reports and theoretical understanding of the synergy between transition metal species are comprehensively reviewed, and perspectives of future research on TMP-based materials for these specific applications are outlined.

Magnetite Nanoparticles In-Situ Grown and Clustered on Reduced Graphene Oxide for Supercapacitor Electrodes

Fe3O4 nanoparticles with average sizes of 3-8 nm were in-situ grown and self-assembled as homogeneous clusters on reduced graphene oxide (RGO) via coprecipitation with some additives, where RGO sheets were expanded from restacking and an increased surface area was obtained. The crystallization, purity and growth evolution of as-prepared Fe3O4/RGO nanocomposites were examined and discussed. Supercapacitor performance was investigated in a series of electrochemical tests and compared with pure Fe3O4. In 1 M KOH electrolyte, a high specific capacitance of 317.4 F g-1 at current density of 0.5 A g-1 was achieved, with the cycling stability remaining at 86.9% after 5500 cycles. The improved electrochemical properties of Fe3O4/RGO nanocomposites can be attributed to high electron transport, increased interfaces and positive synergistic effects between Fe3O4 and RGO.

Freestanding trimetallic Fe-Co-Ni phosphide nanosheet arrays as an advanced electrode for high-performance asymmetric supercapacitors

Transition metal phosphides hold great promise for high performance battery-type electrode materials due to their superb electrical conductivity and high theoretical capacity. Unfortunately, the electrochemical properties of single metal or bimetallic phosphides are unsatisfactory owing to their low energy density and poor cyclic stability, and one feasible approach is to introduce heteroatoms to form trimetallic phosphides. Here, novel Fe-Co-Ni-P nanosheet arrays are in situ synthesized on a flexible carbon cloth substrate via an electrodeposition method followed by a phosphorization treatment. Due to the presence of abundant redox active sites, large specific surface area with mesoporous channels, desirable electrical conductivity, modified electronic structure, and synergistic effect of Fe, Co, and Ni ions, the as-prepared Fe-Co-Ni-P electrode displays significantly enhanced electrochemical performance when compared to bimetallic phosphides Fe-Co-P and Fe-Ni-P. Remarkably, the Fe-Co-Ni-P electrode exhibits a large specific capacity of 593.0 C g^-1 at 1 A g^-1, exceptional rate performance (80.3% capacity retention at 20 A g^-1), and good cycling stability (84.2% capacity retention after 5000cycles). Besides, an asymmetric supercapacitor device with Fe-Co-Ni-P electrode as a positive electrode and a hierarchical porous carbon as a negative electrode shows a high energy density of 57.1 Wh kg^-1 at a power density of 768.5 W kg^-1 as well as excellent cyclability with 88.4% of initial capacity after 10,000cycles. This work manifests that the construction of trimetallic phosphides is an effective strategy to solve the shortcomings of single or bimetallic phosphides for high-performance supercapacitors.

Preparation of ZnCo2O4@PANI core/shell nanobelts for high-performance asymmetric supercapacitors

ZnCo2O4@PANI core/shell nanobelts with excellent sufficient material utilization efficiency and good electronic conductivity have been synthesized, and they exhibit excellent performance in supercapacitor applications.

NiAlP@Cobalt substituted nickel carbonate hydroxide heterostructure engineered for enhanced supercapacitor performance

Transitional metal phosphides with high electrical conductivity and superb physicochemical features have been recognized as ideal battery-type electrode materials for outstanding performance supercapacitors. However, their specific capacities and structural stability are needed to be enhanced for large-scale practical applications. To overcome these shortcomings, we fabricated heterostructured NiAlP@cobalt substituted nickel carbonate hydroxide (Co-NiCH) nanosheet arrays by sequential a hydrothermal reaction, a phosphorization treatment, and a second hydrothermal reaction. Profiting from its core-shell porous nanostructure and synergistic effect of NiAlP with high electrical conductivity and Co-NiCH with high redox reactivity, the resultant NiAlP@Co-NiCH electrode delivers a large specific capacity of 825.7C g^-1 at 1 A g^-1, excellent rate capability with 78.9% capacity retention and long lifespan, superior to those of pure NiAlP and Co-NiCH electrodes. Additionally, an aqueous asymmetric supercapacitor device is constructed by NiAlP@Co-NiCH and lotus pollen-derived hierarchical porous carbon, which demonstrates a large energy density of 82.3 Wh kg^-1 at a power density of 739.8 W kg^-1, and wonderful cycle stability with 88.2% capacity retention after 10,000 cycles. This work proposes a feasible strategy on construction of transitional metal phosphide-based heterojunctions for advanced asymmetric supercapacitor devices.

Rational synthesis of CoFeP@nickel-manganese sulfide core-shell nanoarrays for hybrid supercapacitors

Transition metal phosphide electrodes, particularly those with unique morphologies and micro-/nanostructures, have demonstrated desirable capabilities for hybrid supercapacitor applications by virtue of their superior electrical conductivity and high electrochemical activity. Here, three-dimensional hierarchical CoFeP@nickel-manganese sulfide nanoarrays were in situ constructed on a flexible carbon cloth via a hydrothermal method, a phosphorization process, followed by an electrodeposition approach. In this smart nanoarchitecture, CoFeP nanorods grown on carbon cloth act as the conductive core for rapid electron transfer, while the nickel-manganese sulfide nanosheets decorated on the surface of CoFeP serve as the shell for efficient ion diffusion, forming a stable core-shell heterostructure with enhanced electrical conductivity. Benefiting from the synergy of the two components and the generation of a heterointerface with a modified electronic structure, The CoFeP@nickel-manganese sulfide electrodes deliver a high capacity of 260.7 mA h g^-1 at 1 A g^-1, excellent rate capability, and good cycling stability. More importantly, an aqueous hybrid supercapacitor based on CoFeP@nickel-manganese sulfide as a positive electrode and a lotus pollen-derived hierarchical porous carbon as a negative electrode is constructed to display a maximum energy density of 60.1 W h kg^-1 at 371.8 W kg^-1 and a good cycling stability of 85.7% capacitance retention after 10 000 cycles.

Design of a Scalable Dendritic Copper@Ni2+, Zn2+ Cation-Substituted Cobalt Carbonate Hydroxide Electrode for Efficient Energy Storage

Design and fabrication of novel electrode materials with excellent specific capacitance and cycle stability are urgent for advanced energy storage devices, and the combinability of multiple modification methods is still insufficient. Herein, Ni²⁺, Zn²⁺ double-cation-substitution Co carbonate hydroxide (NiZnCo-CH) nanosheets arrays were established on 3D copper with controllable morphology (3DCu@NiZnCo-CH). The self-standing scalable dendritic copper offers a large surface area and promotes fast electron transport. The 3DCu@NiZnCo-CH electrode shows a markedly improved electrochemical performance with a high specific capacity of ∼1008 C g^-1 at 1 A g^-1 (3.2, 2.83, and 1.26 times larger than Co-CH, ZnCo-CH, and NiCo-CH, respectively) and outstanding rate capability (828.8 C g^-1 at 20 A g^-1) due to its compositional and structural advantages. Density functional theory (DFT) calculation results illustrate that cation doping adjusts the adsorption process and optimizes the charge transfer kinetics. Moreover, an aqueous hybrid supercapacitor based on 3DCu@NiZnCo-CH and rGO demonstrates a high energy density of 42.29 Wh kg^-1 at a power density of 376.37 W kg^-1, along with superior cycling performance (retained 86.7% of the initial specific capacitance after 10,000 cycles). Impressively, these optimized 3DCu@NiZnCo-CH//rGO devices with ionic liquid can be operated stably in a large potential range of 4 V with greatly enhanced energy density and power capability (110.12 Wh kg^-1 at a power density of 71.69 W kg^-1). These findings may shed some light on the rational design of transition-metal compounds with tunable architectures by multiple modification methods for efficient energy storage.

A high-energy-density supercapacitor with multi-shelled nickel-manganese selenide hollow spheres as cathode and double-shell nickel-iron selenide hollow spheres as anode electrodes

Thanks to the attractive structural characteristics and unique physicochemical properties, mixed metal selenides (MMSes) can be considered as encouraging electrode materials for energy storage devices. Herein, a straightforward and efficient approach is used to construct multi-shelled nickel-manganese selenide hollow spheres (MSNMSeHSs) as cathode and double-shell nickel-iron selenide hollow spheres (DSNFSeHSs) as anode electrode materials by tuning shell numbers for supercapacitors. The as-designed MSNMSeHS electrode can deliver a splendid capacity of ∼339.2 mA h g-1/1221.1 C g-1, impressive rate performances of 78.8%, and considerable longevity of 95.7%. The considerable performance is also observed for the DSNFSeHS electrode with a capacity of 258.4 mA h g-1/930.25 C g-1, rate performance of 75.5%, and longevity of 90.9%. An efficient asymmetric apparatus (MSNMSeHS||DSNFSeHS) fabricated by these two electrodes depicts the excellent electrochemical features (energy density of ≈112.6 W h kg-1 at 900.8 W kg-1) with desirable longevity of ≈94.4%.