B-Doped PdRu nanopillar assemblies for enhanced formic acid oxidation electrocatalysis

Construction of H-Doped PdB Nanocrystals as Electrocatalysts to Modulate Formic Acid Oxidation

The strong ligand effect in B-doped Pd-based (PdB) catalysts renders them a promising anode for constructing formic acid fuel cells (FAFCs) exhibiting high power density and outstanding stability. However, the enhancement of the oxidation barrier is unavoidable in this alloy system owing to the electron transfer (ET) from B to Pd. In this study, a hydrogen doping strategy is employed to open charge freedom in PdB compounds and boost their formic acid oxidation reaction (FAOR) activity by suppressing the ET process. The resulting hydrogen-doped PdB (PdBH) exhibits an ultrahigh mass activity of up to 1.2A mg-1 Pd, which is 3.23 times that of the PdB catalyst and 9.55 times that of Pd black. Detailed experimental and theoretical studies show that the interstitial hydrogen leads to enhanced orbital hybridization and reduced electron density around Pd. This optimized ligand effect weakens the carbon monoxide adsorption and increases the direct pathway preference of PdBH, resulting in its outstanding catalytic activity for the FAOR. The development of this high-performance hydrogen-doped PdB catalyst is an important step toward the construction of advanced light element co-doped metal catalysts.

Dual-phase B-doped FeCoNiCuPd high-entropy alloys for nitrogen electroreduction to ammonia

Dual-phase B-doped FeCoNiCuPd high-entropy alloy (DP-B-HEA) nanoparticles were synthesized via a strategy involving thermodynamically driven solid-phase diffusion. The DP-B-HEA/CNFs showed an outstanding electrochemical N2 reduction reaction (NRR) performance with an ammonia yield of 24.8 μmol h-1 cm-2 and NH3 faradaic efficiency (FE) of 39.2%. The optimized electronic structures of the HEA resulting from B doping led to the enhanced NRR activity and selectivity.

B-Doping-Induced Lattice Expansion of Pd Metallene Nanoribbons for Oxygen Reduction Reaction

Pd-based metallene is regarded as an efficient catalyst in the field of oxygen reduction reaction (ORR) because of its fantastic physicochemical features. The morphological structure control, lattice strain engineering, and electronic structure modulation of Pd-based metallene are effective tactics to enhance its electrocatalytic performance. In this work, we fabricate atomically thin B-doped Pd metallene nanoribbons (B-Pd MNRs) for efficient alkaline ORR. The atomically thin nanoribbon structure of B-Pd MNRs can expose many surface atoms as catalytically active sites. Moreover, the incorporation of boron effectively induces the lattice expansion and modulates the electronic structure of Pd, which can synergistically weaken the adsorption of intermediate species on B-Pd MNRs. Therefore, the B-Pd MNRs display excellent activity and durability for ORR. This work opens an avenue to the synthesis of atomically thin heteroatom-doped metallene nanoribbons for energy electrocatalytic applications.

Boosting the Electrocatalytic Formic Acid Oxidation Activity via P-PdAuAg Quaternary Alloying

Direct formic acid fuel cells (DFAFCs) are considered promising sustainable power sources due to their high energy density, nonflammability, and low fuel crossover. However, serious CO poisoning and activity attenuation of the anodic formic acid oxidation reaction (FAOR) greatly restrict the output and durability of DFAFCs. Inspired by the specific relationship between the composition, type, and property of alloys, in this work, we synthesize a series of hybrid substitutional/interstitial quaternary alloys P-PdAuAg by means of a novel polyphosphide route to address these issues. Due to the simultaneous interstitial P-doping and metal (Au, Ag, Pd) co-reduction, the P-PdAuAg quaternary alloy obtained is only 3 nm in diameter with abundant defects. It not only achieves a new high mass activity of 8.08 A mg_Pd^-1 (6.78 A mg_catalyst^-1) but also maintains high stability in the high potential range and harsh reaction conditions. Both the activity and anti-poisoning ability are far exceeding those of the currently reported FAOR catalysts. Detailed density functional theory (DFT) calculations reveal that the superb electrochemical performances originate from the shift of the d-band center of Pd as a result of the synergistic electronic/ligand effects between Pd, Au, Ag, and P. The introduction of interstitial P inhibits the occurrence of an indirect reaction pathway on Pd, while Au and Ag suppress the adsorption of CO and optimize the sequential dehydrogenation steps, leading to boosted reaction kinetics and CO tolerance. This work pioneered a facile way for the synthesis of Pd-based substitutional/interstitial hybrid alloys, providing a promising means of further improving the performance of alloying catalysts.

A "Special" Solvent to Prepare Alloyed Pd2Ni1 Nanoclusters on a MWCNT Catalyst for Enhanced Electrocatalytic Oxidation of Formic Acid

Herein, an electrocatalyst with Pd₂Ni₁ nanoclusters, supporting multiwalled carbon nanotubes (MWCNTs) (referred to Pd₂Ni₁/CNTs), was fabricated with deep eutectic solvents (DES), which simultaneously served as reducing agent, dispersant, and solvent. The mass activity of the catalyst for formic acid oxidation reaction (FAOR) was increased nearly four times compared to a Pd/C catalyst. The excellent catalytic activity of Pd₂Ni₁/CNTs was ascribed to the special nanocluster structure and appropriate Ni doping, which changed the electron configuration of Pd to reduce the d-band and to produce a Pd-Ni bond as a new active sites. These newly added Ni sites obtained more OH^- to release more effective active sites by interacting with the intermediate produced in the first step of FAOR. Hence, this study provides a new method for preparing a Pd-Ni catalyst with high catalytic performance.

Cyanogel-Induced Synthesis of RuPd Alloy Networks for High-Efficiency Formic Acid Oxidation

For direct formic acid fuel cells (DFAFC), palladium (Pd)-based alloy catalysts with competitive morphology and elemental composition are essential to boost the performance of the formic acid oxidation reaction (FAOR) in the anode zone. Herein, we design and synthesize RuPdx alloy nano-network structures (ANs) via the facile wet-chemical reduction of Pd-Ru cyanogel (Pdx [Ru(CN)6]y·aH2O) as an effective electrocatalyst for the FAOR. The formation of Pd-Ru cyanogel depends on the facile coordination of K2PdCl4 and K3 [Ru(CN)6]. The unique structure of cyanogel ensures the presentation of a three-dimensional mesoporous morphology and the homogeneity of the elemental components. The as-prepared RuPd3 ANs exhibit good electrocatalytic activity and stability for the FAOR. Notably, the RuPd3 ANs achieve a mass-specific activity of 2068.4 mA mg−1 in FAOR, which shows an improvement of approximately 16.9 times compared to Pd black. Such a competitive FAOR performance of RuPd3 ANs can be attributed to the advantages of structure and composition, which facilitate the exposure of more active sites, accelerate mass/electron transfer rates, and promote gas escape from the catalyst layer, as well as enhance chemical stability.

Recent Advances in Anode Electrocatalysts for Direct Formic Acid Fuel Cells - Part I - Fundamentals and Pd Based Catalysts

Direct formic acid fuel cells (DFAFCs) have gained immense importance as a source of clean energy for portable electronic devices. It outperforms other fuel cells in several key operational and safety parameters. However, slow kinetics of the formic acid oxidation at the anode remains the main obstacle in achieving a high power output in DFAFCs. Noble metal-based electrocatalysts are effective, but are expensive and prone to CO poisoning. Recently, a substantial volume of research work have been dedicated to develop inexpensive, high activity and long lasting electrocatalysts. Herein, recent advances in the development of anode electrocatalysts for DFAFCs are presented focusing on understanding the relationship between activity and structure. This review covers the literature related to the electrocatalysts based on noble metals, non-noble metals, metal-oxides, synthesis route, support material, and fuel cell performance. The future prospects and bottlenecks in the field are also discussed at the end.

Boosting the anti-poisoning ability of palladium towards electrocatalytic formic acid oxidation via polyphosphide chemistry

In this work, we reported a novel polyphosphide strategy for the synthesis of phosphorus doped Pd (P-Pd) using red phosphorus as the starting material at quasi-ambient conditions. Polyphophide anions, as the key reaction intermediates, served as the reducing agent and phosphorus source to modulate the surface electronic structure of Pd. The P-Pd obtained exhibited topmost CO tolerance and electrocatalytic activity to formic acid oxidation among the state-of-arts reports. The mass activity and turnover frequency of P-Pd reached 4413 mA mg^-1_Pd and 16.04 s^-1 at 0.8 V, which were 23.7 and 6.4 times that of commercial Pd/C respectively. After 1000 repeated cycles, 82% initial activity was reserved. Combined with the electrochemical analysis and the density functional theory calculation, the boosted electrochemical performances can be attributed to the size and electronic effects induced by the P doping, which increase the surface actives sites, inhibit the adsorption of CO and change the reaction pathway to favorable CO₂ route. A full cell was also assembled to demonstrate the practical potential of the P-Pd, which showed a maximum power density of 21.56 mW cm^-2. This polyphophide-based reaction route provides a new strategy for the preparation of efficient and durable phosphorus doped alloys for electrocatalysis.

Facile synthesis of low-dimensional PdPt nanocrystals for high-performance electrooxidation of C 2 alcohols

Low-dimensional noble-metal materials (LDNMs) with different structural advantages have been considered as the high-performance catalysts for C2 alcohol electrooxidation. However, it is still a great challenging to precisely construct nanomaterials with low-dimensional composite structure thus to take advantages of various dimension, especial without the surfactant participation. Most studies focus on the modulation of the single dimensional nanocatalysts, the correlation between electrocatalytic performances and low-dimension composite have been rarely reported. Herein, we engineered a simple one-step approach to design multi-low-dimensional PdPt nanomaterials by using different Pd precursors. The low-dimensional PdPt nanocrystals (NCs) composed of zero dimension (0D) dendrite-like nanoparticles and two dimension (2D) nanosheets were obtained by using Pd(OAc)₂, and meanwhile the 2D PdPt nanosheet assemblies (NAs) were synthesized by the introduction of NaPdCl₄. Specifically, benefitting from the unique low-dimension structures with fast electron/mass transfer, and optimized electronic and synergistic effect, the multi-low-dimensional 0D-2D PdPt NCs showed the highest ethanol oxidation reaction (EOR)/ethylene glycol oxidation reaction (EGOR) mass activities, which were much higher than 2D PdPt NAs. The 0D-2D PdPt NCs also exhibited the highest structural stability. Generally, this work could inspire more advanced designs for surfactant-free synthesis and promote the fundamental engineering on nanocatalysts with low-dimension composite structure for electrocatalytic fields.

PtM/Mx By (M=Ni, Co, Fe) Heterostructured Nanobundles as Advanced Electrocatalyst for Hydrogen Evolution Reaction

Optimizing the electronic and synergistic effect of hybrid electrocatalysts based on Pt and Pt-based nanocatalysts is of tremendous importance towards a superior hydrogen evolution performance under both acidic and alkaline conditions. However, developing an ideal Pt-based hydrogen evolution reaction (HER) electrocatalyst with moderated electronic structure as well as strong synergistic effect is still a challenge. Herein, we fabricated boron (B)-doped PtNi nanobundles by a two-step method using NaBH₄ as the boron source to obtain PtNi/Ni₄ B₃ heterostructures with well-defined nanointerfaces between PtNi and Ni₄ B₃ , achieving an enhanced catalytic HER performance. Especially, the PtNi/Ni₄ B₃ nanobundles (PtNi/Ni₄ B₃ NBs) can deliver a current density of 10 mA cm^-2 at the overpotential of 14.6 and 26.5 mV under alkaline and acidic media, respectively, as well as outstanding electrochemical stability over 40 h at the current density of 10 mA cm^-2 . Remarkably, this approach is also universal for the syntheses of PtCo/Co₃ B and PtFe/Fe₄₉ B with outstanding electrocatalytic HER performance.

B,N-Doped PdRu Aerogels as High-Performance Peroxidase Mimics for Sensitive Detection of Glucose

Among plentiful porous nanomaterials, noble metal aerogels taken as nanozymes attract broad attention in sensing applications with their distinct enzyme mimic functions. In the catalytic field, the heteroatom doping strategy is a kind of way with great promise in improving the enzyme mimic activity of noble metal aerogels. In this experiment, we find a type of creative materials that were prepared by the fast and simple method. Due to the unique porous structure and synergetic effect from doped atoms, PdRu aerogels co-doped with boron and nitrogen (B, N-PdRu aerogels) were prepared using NH₃BH₃ as a reductant, which present improved peroxidase mimicking activity. With the existence of H₂O₂, the oxidation of 3,3',5,5'-tetramethylbenzidine was catalyzed by B, N-PdRu aerogels fairly efficiently, whose solution would be a blue appearance at optimum absorption wavelength 652 nm. Thus, by the tandem reaction bound to the enzyme glucose oxidase, the B, N-PdRu aerogels can be used for the sensitive determination of glucose. The new method has a good linear detection effect for glucose in the range of 10 μM to 2 mM. The minimum limit of detection can reach as low as 6 μM. This work will contribute to research on the rational design of metal aerogels based on the heteroatomic doping strategy and enhance the corresponding performance for a variety of applications.

Mechanistic effects of blending formic acid with ethanol on Pd activity towards formic acid oxidation in acidic media

The direct formic acid fuel cell (DFAFC) is one of the most promising direct liquid fuel cells. Pd is the most active catalyst towards formic oxidation, however, it suffers from CO-like poisoning and instability in acidic media. Blending formic acid with ethanol is known to synergistically enhance the Pt catalytic activity of Pt. However, it has not been studied in the case of Pd. In this study, ethanol/formic acid blends were tested, aiming at understanding the effect of ethanol on the formic acid oxidation mechanism at Pd and how the direct and indirect pathways could be affected. The blends consisted of different formic acid (up to 4 M) and ethanol (up to 0.5 M) concentrations. The catalytic activity of a 40% Pd/C catalyst was tested in 0.1 M H2SO4 + XFA + YEtOH using cyclic voltammetry, while the catalyst resistance to poisoning in the presence and absence of ethanol was tested using chronopotentiometry. The use of these blends is found to not only eliminate the indirect pathway but also slowly decrease the direct pathway activity too. That is believed to be due to the different ethanol adsorption orientations at different potentials. This study should open the door for further studying the oxidation of FA/ethanol blends using different pHs and different Pd-based catalysts.

One-pot synthesis of rugged PdRu nanosheets as the efficient catalysts for polyalcohol electrooxidation

Recently, intensive attention has been attracted to the two-dimensional metal nanosheets, owing to their excellent electrocatalytic performance for direct alcohol fuel cells (DAFCs). Herein, PdRu nanosheets have been synthesized successfully by a facile one-pot method. The rugged nanosheet structure provided plentiful surface active sites to enhance the electrocatalytic activity. Moreover, benefiting from the synergistic effect and improved electronic structure, PdRu NSs exhibited splendid electrocatalytic performance in ethylene glycol oxidation reaction (EGOR) and glycerol oxidation reaction (GOR). Specifically, the mass activity of PdRu NSs was 1.72 and 3.69 times over those of Pd NSs and Pd/C catalysts in EGOR. Moreover, PdRu NSs displayed the largest mass activity in GOR, 1.48 and 2.47 times as large as Pd NSs and Pd/C catalysts. The results of stability tests demonstrated that the durability of PdRu NSs was the highest among the obtained catalysts. This work plays a directive role on the in-depth engineering on Pd-based catalysts with nanosheet architectures.