When graphene meets ionic liquids: a good match for the design of functional materials

Green Synthesis and Enhanced Photocatalytic Performance of rGO/ZnO/Fe3O4 Nanocomposites: A Sustainable Approach to Environmental Remediation

The fast industrialization and mounting pollution have necessitated the need for advanced materials in order to degrade pollutants efficiently. Metal oxide-based and graphene-derivative photocatalytic nanocomposites are excellent for harnessing light energy in environmental remediation. Among them, ZnO-based nanocomposites have drawn considerable attention because of their high photocatalytic activity and stability. However, improving the performance of these nanocomposites is still necessary for their wide applications. This study explores the green synthesis, detailed characterization, and enhanced photocatalytic efficiency of reduced graphene oxide rGO/ZnO/Fe3O4 nanocomposites. The nanocomposites were synthesized via a hydrothermal method, utilizing milk thistle extract as a natural reducing agent, representing a novel and sustainable approach to fabricating magnetic rGO/Fe3O4 nanocomposites. These composites were further integrated with zinc oxide to produce a multifunctional material, exhibiting high surface area, superior electrical and thermal conductivity, and robust mechanical strength. The photocatalytic performance was significantly enhanced due to the synergistic interaction between graphene and metal oxide nanoparticles, leading to efficient degradation of environmental pollutants. Electrochemical analysis via cyclic voltammetry revealed distinctive redox peaks, demonstrating efficient electron transfer processes essential for applications in energy conversion and storage. This green synthesis not only provides a sustainable pathway for the development of advanced nanocomposites but also underscores their potential in a wide range of applications, including environmental remediation, sensing, energy storage, and optoelectronics.

Recent Advances in Graphene Adaptive Thermal Camouflage Devices

Thermal camouflage is a highly coveted technology aimed at enhancing the survivability of military equipment against infrared (IR) detectors. Recently, two-dimensional (2D) nanomaterials have shown low IR emissivity, widely tunable opto-electronic properties, and compatibility with stealth applications. Among these, graphene and graphene-like materials are the most appealing 2D materials for thermal camouflage applications. In multilayer graphene (MLG), charge density can be effectively tuned through sufficiently intense electric fields or through electrolytic gating. Therefore, MLG's optical properties, like infrared emissivity and absorbance, can be controlled in a wide range by voltage bias. The large emissivity modulation achievable with this material makes it suitable in the design of thermal dynamic camouflage devices. Generally, the emissivity modulation in the multilayered graphene medium is governed by an intercalation process of non-volatile ionic liquids under a voltage bias. The electrically driven reduction of emissivity lowers the apparent temperature of a surface, aligning it with the background temperature to achieve thermal camouflage. This characteristic is shared by other graphene-based materials. In this review, we focus on recent advancements in the thermal camouflage properties of graphene in composite films and aerogel structures. We provide a summary of the current understanding of how thermal camouflage materials work, their present limitations, and future opportunities for development.

Covalent immobilization of N-heterocyclic carbenes on pristine carbon substrates: from nanoscale characterization to bulk catalysis

To control the synthesis of designer catalysts on graphitic materials up to the nanometer scale, methods should be provided that combine both nanoscale characterization and bulk scale experiments. This work reports the grafting of N-heterocyclic carbene (NHC)-type catalysts on graphite, both at nanometer and bulk scale, as it allows increased insights into the nature of the immobilized catalysts.

Effect of Fillers Modification with ILs on Fillers Textural Properties: Thermal Properties of SBR Composites

In this work, we present the effect of graphene nanoplatelets (GnPs) modification with ionic liquids (ILs). The textural properties of graphene nanoplatelets (GnPs) used as styrene-butadiene rubber's filler and the thermal properties of the composites obtained with the use of the mentioned fillers were investigated. GnPs were modified with 1-butylpyridinium bromide (BPyBr) and 4-methyl-1-butylpyridinium bromide (BmPyBr) through two different ways. One strategy has been to deposit the filler modifier from the solution. The second one involved the modification of the filler with ionic liquids in bulk during the preparation of elastomer blends. Settlement of the proposed ionic liquids onto the GnPs' surface led to significant changes in the textural characteristics. BPyBr has restricted the filler's microporosity, whereas BmPyBr has caused the formation of a more opened filler structure without the increase in its average pore size. GnPs modified with ILs led to reducing the temperature of vulcanization of SBR compounds and affected the thermal stability of the composites.

Adsorption of Choline Phenylalanilate on Polyaromatic Hydrocarbon-Shaped Graphene and Reaction Mechanism with CO2: A Computational Study

The interaction of ionic liquids (ILs) with carbon materials is of fundamental importance in several areas of materials science, physics, and chemistry. Their adsorption on pristine and N-doped graphene surfaces is discussed here on the basis of results of density functional theory calculations. The nature of adsorption was investigated for an amino acid (AA)-based IL consisting of the choline cation [Ch] and the l-phenylalanilate anion [Phe] that interacts with a sheet of N-doped graphene. The interaction mechanism, binding energy, electron density, and non-covalent interaction analysis were evaluated by considering the cation, anion, and ion pair adsorbed on graphene separately. The distribution of cations and anions in the liquid bulk and on the graphene surface was then analyzed by molecular dynamics simulations. Since AA-based ILs are efficient absorbents for capture of CO2 due to the pronounced affinity of carbon dioxide to react with amino groups, we investigated the capacity of [Ch][Phe] to react with CO2 under various conditions. We considered the multistep mechanism of the reaction of [Phe] with CO2 first for the anion in the liquid bulk and then for the [Phe] anion adsorbed on the graphene surface. The initial step, the formation of the zwitterionic addition product, is followed by its structural rearrangement through intramolecular proton transfer and conformational isomerization processes to form carboxylic acid derivatives. The entire mechanism was evaluated for the [Phe] anion before and after adsorption on graphene to investigate how interactions with surfaces of carbon materials can affect the CO2 capture capacity of an AA-based IL such as [Ch][Phe].

From Forces to Assemblies: van der Waals Forces-Driven Assemblies in Anisotropic Quasi-2D Graphene and Quasi-1D Nanocellulose Heterointerfaces towards Quasi-3D Nanoarchitecture

In the pursuit of advanced functional materials, the role of low-dimensional van der Waals (vdW) heterointerfaces has recently ignited noteworthy scientific interest, particularly in assemblies that incorporate quasi-2D graphene and quasi-1D nanocellulose derivatives. The growing interest predominantly stems from the potential to fabricate distinct genres of quasi-2D/1D nanoarchitecture governed by vdW forces. Despite the possibilities, the inherent properties of these nanoscale entities are limited by in-plane covalent bonding and the existence of dangling π-bonds, constraints that inhibit emergent behavior at heterointerfaces. An innovative response to these limitations proposes a mechanism that binds multilayered quasi-2D nanosheets with quasi-1D nanochains, capitalizing on out-of-plane non-covalent interactions. The approach facilitates the generation of dangling bond-free iso-surfaces and promotes the functionalization of multilayered materials with exceptional properties. However, a gap still persists in understanding transition and alignment mechanisms in disordered multilayered structures, despite the extensive exploration of monolayer and asymmetric bilayer arrangements. In this perspective, we comprehensively review the sophisticated aspects of multidimensional vdW heterointerfaces composed of quasi-2D/1D graphene and nanocellulose derivatives. Further, we discuss the profound impacts of anisotropy nature and geometric configurations, including in-plane and out-of-plane dynamics on multiscale vdW heterointerfaces. Ultimately, we shed light on the emerging prospects and challenges linked to constructing advanced functional materials in the burgeoning domain of quasi-3D nanoarchitecture.

Inducing Electric Current in Graphene Using Ionic Flow

Classical nanofluidic frameworks account for the confined fluid and ion transport under an electrostatic field at the solid-liquid interface, but the electronic property of the solid is often overlooked. Harvesting the interaction of the nanofluidic transport with the electron transport in solid requires a route effectively coupling ion and electron dynamics. Here we report a nanofluidic analogy of Coulomb drag for exploring the dynamic ion-electron interactions at the liquid-graphene interface. An induced electric current in graphene by ionic flow with no bias directly applied to the graphene channel is observed experimentally, featuring an opposite electron current direction to the ion current. Our experiments and ab initio calculations show that the current generation stems from the confined ion-electron interactions via a nanofluidic Coulomb drag mechanism. Our findings may open up a new dimension for nanofluidics and transport control by ion-electron coupling.

Long-term stable solid concentrated graphene dispersion assisted by a highly aromatic ionic liquid

HYPOTHESIS

The sonochemical exfoliation of graphite in solution has been demonstrated as a promising and easy technique for producing graphene dispersions. This is usually done in organic solvents and leads to unstable dispersions with very low graphene concentration. Ionic liquids (ILs) represent a versatile and safe alternative to traditional organic solvents. A few recent studies reported the use of commercial ILs with bulky anions, such as bis(trifluoromethylsulfonyl)imide, and aromatic cations, such as imidazolium, which favour the exfoliation of graphite through π-π and cation-π interactions. Although recently investigated, the role of aromatic groups on imidazolium cations is still controversial and systematic studies are still necessary. Besides, these studies were limited to liquid dispersions at room temperature.

EXPERIMENTS

Herein, we prepared four highly aromatic imidazolium-based ILs, including the newly reported 1-(naphthylmethyl)-3-benzylimidazolium bis(trifluoromethanesulfonyl)imide, [(Np)(Bn)im][NTf₂]. These ILs were used for the sonochemical exfoliation of graphite and compared with a commercial benchmark, 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [Bmim][NTf₂].

FINDINGS

Interestingly, [(Np)(Bn)im][NTf₂] allowed reaching solid dispersions at room temperature containing thin few layer graphene sheets with long-term stability (up to 2 years) and high concentration (3.6 mg/mL). Such graphene dispersion combines long-term stability in the solid-state and high processability in the liquid state, by a simple heating above 60 °C.

Graphene-Based Electrochemical Biosensors for Breast Cancer Detection

Breast cancer (BC) is the most common cancer in women, which is also the second most public cancer worldwide. When detected early, BC can be treated more easily and prevented from spreading beyond the breast. In recent years, various BC biosensor strategies have been studied, including optical, electrical, electrochemical, and mechanical biosensors. In particular, the high sensitivity and short detection time of electrochemical biosensors make them suitable for the recognition of BC biomarkers. Moreover, the sensitivity of the electrochemical biosensor can be increased by incorporating nanomaterials. In this respect, the outstanding mechanical and electrical performances of graphene have led to an increasingly intense study of graphene-based materials for BC electrochemical biosensors. Hence, the present review examines the latest advances in graphene-based electrochemical biosensors for BC biosensing. For each biosensor, the detection limit (LOD), linear range (LR), and diagnosis technique are analyzed. This is followed by a discussion of the prospects and current challenges, along with potential strategies for enhancing the performance of electrochemical biosensors.

An Electrochemical Immunosensor Based on Gold-Graphene Oxide Nanocomposites with Ionic Liquid for Detecting the Breast Cancer CD44 Biomarker

We develop a highly sensitive electrochemical immunosensor for the detection of a cluster of differentiation-44 (CD44) antigen, a breast cancer biomarker. The hybrid nanocomposite consists of graphene oxide, ionic liquid, and gold nanoparticles (GO-IL-AuNPs) immobilized on a glassy carbon electrode. GO favors the immobilization of antibodies because of the availability of oxygen functionalities. However, 1-butyl-3-methylimidazolium tetrafluoroborate (BMIM.BF₄) and AuNPs facilitate electron transfer and increase the effective surface area, which enhances the performance of the immunosensor. Furthermore, UV-visible, fourier transform infrared and Raman spectroscopy, X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, voltammetry, and electrochemical impedance spectroscopy characterization techniques have been employed to investigate the structural and chemical properties of the nanomaterials. The quantitative detection of CD44 antigen has been accomplished via differential pulse voltammetry and EIS detection techniques. It has been quantified that the proposed immunosensor offers excellent detection ability in both phosphate-buffered saline (PBS) and serum samples. Under optimum conditions, the linear detection range of the immunosensor for CD44 antigen is 5.0 fg mL^-1 to 50.0 μg mL^-1 and the limit of detection is 2.0 and 1.90 fg mL^-1 as observed via DPV and EIS, respectively, in PBS. Additionally, the immunosensor has high sensitivity and specificity and can be successfully applied for the detection of CD44 antigen in clinical samples.

In situ self-assembled N-rich carbon on pristine graphene as a highly effective support and cocatalyst of short Pt nanoparticle chains for superior electrocatalytic activity toward methanol oxidation

Highly conductive cocatalysts with great promotion effects are critical for the development of pristine graphene supported Pt-based catalysts for the methanol oxidation reaction (MOR) in direct methanol fuel cells (DMFCs). However, identification of these cocatalysts and controlled fabrication of Pt/cocatalyst/graphene hybrids with superior catalytic performance present great challenges. For the first time, pristine graphene supported N-rich carbon (NC) has been controllably fabricated via ionic-liquid-based in situ self-assembly for in situ growth of small and uniformly dispersed Pt NP chains to improve the MOR catalytic activity. It is discovered that the NC serves simultaneously as a linker to facilitate in situ nucleation of Pt, a stabilizer to restrict its growth and aggregation, and a structure-directing agent to induce the formation of Pt NP chains. The obtained nanohybrid shows a much higher forward peak current density than commercial Pt/C and most reported noncovalently functionalized carbon (NFC) supported Pt catalysts, a lower onset potential than almost all commercial Pt/C and NFC supported Pt, and greatly enhanced durability compared to graphene supported Pt NPs and commercial Pt/C. The superior catalytic performance is ascribed to the uniformly dispersed, small-diameter, and short Pt NP chains supported on highly conductive G@NC providing high ECSA and improved CO tolerance and the NC with high content of graphitic N greatly enhancing the intrinsic activity and CO tolerance of Pt and offering numerous binding sites for robustly attaching Pt. This work not only identifies and controllably fabricates a novel cocatalyst to significantly promote the catalytic activity of pristine graphene supported Pt but provides a facile and economical strategy for the controlled synthesis of high-performance integrated catalysts for the MOR in DMFCs.

Functional Ionic Liquids Decorated Carbon Hybrid Nanomaterials for the Electrochemical Biosensors

Ionic liquids are gaining high attention due to their extremely unique physiochemical properties and are being utilized in numerous applications in the field of electrochemistry and bio-nanotechnology. The excellent ionic conductivity and the wide electrochemical window open a new avenue in the construction of electrochemical devices. On the other hand, carbon nanomaterials, such as graphene (GR), graphene oxide (GO), carbon dots (CDs), and carbon nanotubes (CNTs), are highly utilized in electrochemical applications. Since they have a large surface area, high conductivity, stability, and functionality, they are promising in biosensor applications. Nevertheless, the combination of ionic liquids (ILs) and carbon nanomaterials (CNMs) results in the functional ILs-CNMs hybrid nanocomposites with considerably improved surface chemistry and electrochemical properties. Moreover, the high functionality and biocompatibility of ILs favor the high loading of biomolecules on the electrode surface. They extremely enhance the sensitivity of the biosensor that reaches the ability of ultra-low detection limit. This review aims to provide the studies of the synthesis, properties, and bonding of functional ILs-CNMs. Further, their electrochemical sensors and biosensor applications for the detection of numerous analytes are also discussed.

Xenon Diffusion in Ionic Liquids with Blurred Nanodomain Separation

The dynamics of xenon gas, loaded in a series of 1-alkyl-3-methylimidazolium based ionic liquids, probes the formation of increasingly blurred polar/apolar nanodomains as a function of the anion type and the cation chain length. Exploiting ¹²⁹ Xe NMR spectroscopy techniques, like Pulse Gradient Spin Echo (PGSE) and inversion recovery (IR), the diffusion motion and relaxation times are determined for 1-alkyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [C_n C₁ im][TFSI]. A correlation between the ILs nano-structure and both xenon diffusivity and relaxation times, as well as chemical shifts, is outlined. Interestingly, comparison with previous results of the same properties in the homologous imidazolium chlorides and hexafluorophospate shows an opposite trend with the alkyl chain length. Classical molecular dynamics (MD) simulations are used to calculate the xenon and cation and anion diffusion coefficients in the same systems, including imidazolium cations with longer chains (n=4, 6, 8 … 20). An almost quantitative agreement with the experiments validates the MD simulations and, at the same time, provides the necessary structural and dynamic microscopic insights on the nano-segregation and diffusion of xenon in bistriflimide, chloride and hexafluorphosphate salts allowing to observe and rationalize the shaping effect of the cation in the nanostructure.

Design of Graphene/Ionic Liquid Composites for Carbon Capture

Pore size is a crucial factor impacting gas separation in porous separation materials, but how to control the pore size to optimize the separation performance remains a challenge. Here, we propose a design of graphene/ionic liquid composites with tunable slit pore sizes, where cations and anions of ionic liquids are intercalated between graphene layers. By varying the sizes of the ions, we show from first-principles density functional theory calculations that the accessible pore size can be tuned from 3.4 to 6.0 Å. Grand canonical Monte Carlo simulations of gas sorption find that the composite materials possess high CO₂ uptake at room temperature and 1 bar (up to ∼8.5 mmol/g). Further simulations of the sorption of gas mixtures reveal that high CO₂/N₂ and CO₂/CH₄ adsorption selectivities can be obtained when the accessible pore size is <5 Å. This work suggests a new strategy to achieve tunable pore sizes via the graphene/IL composites for highly selective CO₂/N₂ and CO₂/CH₄ adsorption.