1
|
Vasi S, Giofrè SV, Perathoner S, Mallamace D, Abate S, Wanderlingh U. X-ray Characterizations of Exfoliated MoS 2 Produced by Microwave-Assisted Liquid-Phase Exfoliation. MATERIALS (BASEL, SWITZERLAND) 2024; 17:3887. [PMID: 39203065 PMCID: PMC11355266 DOI: 10.3390/ma17163887] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 07/12/2024] [Revised: 07/30/2024] [Accepted: 07/31/2024] [Indexed: 09/03/2024]
Abstract
An X-ray analysis of exfoliated MoS2, produced by means of microwave-assisted liquid-phase exfoliation (LPE) from bulk powder in 1-methyl-2-pyrrolidone (NMP) or acetonitrile (ACN) + 1-methyl-2-pyrrolidone (NMP) solvents, has revealed distinct structural differences between the bulk powder and the microwave-exfoliated samples. Specifically, we performed X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) measurements to identify the elements of our exfoliated sample deposited on a Si substrate by drop-casting, as well as their chemical state and its structural crystalline phase. In the exfoliated sample, the peaks pattern only partially resemble the theoretical Miller indices for MoS2. In contrast, the bulk powder's spectrum shows the characteristic peaks of the 2H polytype of MoS2, but with some broadening. Notable is the retention of partial crystallinity in the post-exfoliation phases, specifically in the normal-to-plane orientation, thus demonstrating the effectiveness of microwave-assisted techniques in producing 2D MoS2 and attaining desirable properties for the material. XPS measurements confirm the success of the exfoliation procedure and that the exfoliated sample retains its original structure. The exfoliation process has been optimized to maintain the structural integrity of MoS2 while enhancing its surface area and electrochemical performance, thereby making it a promising material for advanced electronic and optoelectronic applications ranging from energy storage to sensing devices under ambient conditions.
Collapse
Affiliation(s)
- Sebastiano Vasi
- Department of Mathematical and Computational Science, Physical Science and Earth Science, University of Messina, Viale F. Stagno D’Alcontres 31, I-98166 Messina, Italy;
| | - Salvatore Vincenzo Giofrè
- Department of Chemical, Biological, Pharmaceutical and Environmental Sciences, University of Messina, Viale Ferdinando Stagno D’Alcontres 31, I-98166 Messina, Italy; (S.V.G.); (S.P.); (D.M.); (S.A.)
| | - Siglinda Perathoner
- Department of Chemical, Biological, Pharmaceutical and Environmental Sciences, University of Messina, Viale Ferdinando Stagno D’Alcontres 31, I-98166 Messina, Italy; (S.V.G.); (S.P.); (D.M.); (S.A.)
| | - Domenico Mallamace
- Department of Chemical, Biological, Pharmaceutical and Environmental Sciences, University of Messina, Viale Ferdinando Stagno D’Alcontres 31, I-98166 Messina, Italy; (S.V.G.); (S.P.); (D.M.); (S.A.)
| | - Salvatore Abate
- Department of Chemical, Biological, Pharmaceutical and Environmental Sciences, University of Messina, Viale Ferdinando Stagno D’Alcontres 31, I-98166 Messina, Italy; (S.V.G.); (S.P.); (D.M.); (S.A.)
| | - Ulderico Wanderlingh
- Department of Mathematical and Computational Science, Physical Science and Earth Science, University of Messina, Viale F. Stagno D’Alcontres 31, I-98166 Messina, Italy;
| |
Collapse
|
2
|
Rajan A, Buchberger S, Edwards B, Zivanovic A, Kushwaha N, Bigi C, Nanao Y, Saika BK, Armitage OR, Wahl P, Couture P, King PDC. Epitaxial Growth of Large-Area Monolayers and van der Waals Heterostructures of Transition-Metal Chalcogenides via Assisted Nucleation. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2024; 36:e2402254. [PMID: 38884948 DOI: 10.1002/adma.202402254] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/12/2024] [Revised: 06/08/2024] [Indexed: 06/18/2024]
Abstract
The transition-metal chalcogenides include some of the most important and ubiquitous families of 2D materials. They host an exceptional variety of electronic and collective states, which can in principle be readily tuned by combining different compounds in van der Waals heterostructures. Achieving this, however, presents a significant materials challenge. The highest quality heterostructures are usually fabricated by stacking layers exfoliated from bulk crystals, which - while producing excellent prototype devices - is time consuming, cannot be easily scaled, and can lead to significant complications for materials stability and contamination. Growth via the ultra-high vacuum deposition technique of molecular-beam epitaxy (MBE) should be a premier route for 2D heterostructure fabrication, but efforts to achieve this are complicated by non-uniform layer coverage, unfavorable growth morphologies, and the presence of significant rotational disorder of the grown epilayer. This work demonstrates a dramatic enhancement in the quality of MBE grown 2D materials by exploiting simultaneous deposition of a sacrificial species from an electron-beam evaporator during the growth. This approach dramatically enhances the nucleation of the desired epi-layer, in turn enabling the synthesis of large-area, uniform monolayers with enhanced quasiparticle lifetimes, and facilitating the growth of epitaxial van der Waals heterostructures.
Collapse
Affiliation(s)
- Akhil Rajan
- SUPA, School of Physics and Astronomy, University of St Andrews, St Andrews, KY16 9SS, UK
| | - Sebastian Buchberger
- SUPA, School of Physics and Astronomy, University of St Andrews, St Andrews, KY16 9SS, UK
- Max Planck Institute for Chemical Physics of Solids, Nöthnitzer Strasse 40, 01187, Dresden, Germany
| | - Brendan Edwards
- SUPA, School of Physics and Astronomy, University of St Andrews, St Andrews, KY16 9SS, UK
| | - Andela Zivanovic
- SUPA, School of Physics and Astronomy, University of St Andrews, St Andrews, KY16 9SS, UK
- Max Planck Institute for Chemical Physics of Solids, Nöthnitzer Strasse 40, 01187, Dresden, Germany
| | - Naina Kushwaha
- SUPA, School of Physics and Astronomy, University of St Andrews, St Andrews, KY16 9SS, UK
- STFC Central Laser Facility, Research Complex at Harwell, Harwell Campus, Didcot, OX11 0QX, UK
| | - Chiara Bigi
- SUPA, School of Physics and Astronomy, University of St Andrews, St Andrews, KY16 9SS, UK
| | - Yoshiko Nanao
- SUPA, School of Physics and Astronomy, University of St Andrews, St Andrews, KY16 9SS, UK
| | - Bruno K Saika
- SUPA, School of Physics and Astronomy, University of St Andrews, St Andrews, KY16 9SS, UK
| | - Olivia R Armitage
- SUPA, School of Physics and Astronomy, University of St Andrews, St Andrews, KY16 9SS, UK
| | - Peter Wahl
- SUPA, School of Physics and Astronomy, University of St Andrews, St Andrews, KY16 9SS, UK
- Physikalisches Institut, Universität Bonn, Nussallee 12, 53115, Bonn, Germany
| | - Pierre Couture
- Ion Beam Centre, University of Surrey, Guildford, Surrey, GU2 7XH, UK
| | - Phil D C King
- SUPA, School of Physics and Astronomy, University of St Andrews, St Andrews, KY16 9SS, UK
| |
Collapse
|
3
|
Zhang J, Mei B, Chen H, Sun Z. Review on synthetic approaches and PEC activity performance of bismuth binary and mixed-anion compounds for potential applications in marine engineering. Dalton Trans 2024; 53:10376-10402. [PMID: 38809139 DOI: 10.1039/d4dt01212g] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 05/30/2024]
Abstract
Photoelectrochemical (PEC) technology in marine engineering holds significant importance due to its potential to address various challenges in the marine environment. Currently, PEC-type applications in marine engineering offer numerous benefits, including sustainable energy generation, water desalination and treatment, photodetection, and communication. Finding novel efficient photoresponse semiconductors is of great significance for the development of PEC-type techniques in the marine space. Bismuth-based semiconductor materials possess suitable and tunable bandgap structures, high carrier mobility, low toxicity, and strong oxidation capacity, which gives them great potential for PEC-type applications in marine engineering. In this paper, the structure and properties of bismuth binary and mixed-anion semiconductors have been reviewed. Meanwhile, the recent progress and synthetic approaches were discussed from the point of view of the application prospects. Finally, the issues and challenges of bismuth binary and mixed-anion semiconductors in PEC-type photodetection and hydrogen generation are analyzed. Thus, this perspective will not only stimulate the further investigation and application of bismuth binary and mixed-anion semiconductors in marine engineering but also help related practitioners understand the recent progress and potential applications of bismuth binary and mixed-anion compounds.
Collapse
Affiliation(s)
- Jiaji Zhang
- Sanya Science and Education Innovation Park, Wuhan University of Technology, Sanya 572025, China
- School of Materials Science and Engineering, Wuhan University of Technology, Wuhan 430070, China.
- School of Civil Engineering and Architecture, Wuhan University of Technology, Wuhan 430070, China
- Birmingham Centre for Energy Storage & School of Chemical Engineering, University of Birmingham, Birmingham, B152TT, UK
- Hainan Yourui Cohesion Technology Co., Ltd, Sanya, 572025, China
| | - Bingchu Mei
- School of Materials Science and Engineering, Wuhan University of Technology, Wuhan 430070, China.
| | - Huiyu Chen
- School of Materials Science and Engineering, Wuhan University of Technology, Wuhan 430070, China.
- School of Civil Engineering and Architecture, Wuhan University of Technology, Wuhan 430070, China
| | - Zaichun Sun
- School of Materials Science and Engineering, Wuhan University of Technology, Wuhan 430070, China.
- Hainan Yourui Cohesion Technology Co., Ltd, Sanya, 572025, China
| |
Collapse
|
4
|
Raghunathan M, Kapoor A, Mohammad A, Kumar P, Singh R, Tripathi SC, Muzammil K, Pal DB. Advances in two-dimensional transition metal dichalcogenides-based sensors for environmental, food, and biomedical analysis: A review. LUMINESCENCE 2024; 39:e4703. [PMID: 38433325 DOI: 10.1002/bio.4703] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/02/2023] [Revised: 01/10/2024] [Accepted: 02/06/2024] [Indexed: 03/05/2024]
Abstract
Transition metal dichalcogenides (TMDCs) are versatile two-dimensional (2D) nanomaterials used in biosensing applications due to their excellent physical and chemical properties. Due to biomaterial target properties, biosensors' most significant challenge is improving their sensitivity and stability. In environmental analysis, TMDCs have demonstrated exceptional pollutant detection and removal capabilities. Their high surface area, tunable electronic properties, and chemical reactivity make them ideal for sensors and adsorbents targeting various contaminants, including heavy metals, organic pollutants, and emerging contaminants. Furthermore, their unique electronic and optical properties enable sensitive detection techniques, enhancing our ability to monitor and mitigate environmental pollution. In the food analysis, TMDCs-based nanomaterials have shown remarkable potential in ensuring food safety and quality. These nanomaterials exhibit high specificity and sensitivity for detecting contaminants, pathogens, and adulterants in various food matrices. Their integration into sensor platforms enables rapid and on-site analysis, reducing the reliance on centralized laboratories and facilitating timely interventions in the food supply chain. In biomedical studies, TMDCs-based nanomaterials have demonstrated significant strides in diagnostic and therapeutic applications. Their biocompatibility, surface functionalization versatility, and photothermal properties have paved the way for novel disease detection, drug delivery, and targeted therapy approaches. Moreover, TMDCs-based nanomaterials have shown promise in imaging modalities, providing enhanced contrast and resolution for various medical imaging techniques. This article provides a comprehensive overview of 2D TMDCs-based biosensors, emphasizing the growing demand for advanced sensing technologies in environmental, food, and biomedical analysis.
Collapse
Affiliation(s)
- Muthukumar Raghunathan
- Department of Biotechnology, School of Bioengineering, SRM Institute of Science and Technology, Kattankulathur, Chennai, Tamil Nadu, India
| | - Ashish Kapoor
- Department of Chemical Engineering, Harcourt Butler Technical University, Kanpur, Uttar Pradesh, India
| | - Akbar Mohammad
- School of Chemical Engineering, Yeungnam University, Gyeongsan, Gyeongsangbuk-do, Republic of Korea
| | - Praveen Kumar
- Department of Biotechnology, School of Bioengineering, SRM Institute of Science and Technology, Kattankulathur, Chennai, Tamil Nadu, India
| | - Rajeev Singh
- Department of Chemical Environmental Science, Jamia Millia Islamia, New Delhi, India
| | - Subhash C Tripathi
- Institute of Applied Sciences & Humanities, Department of Chemistry, GLA University, Mathura, Uttar Pradesh, India
| | - Khursheed Muzammil
- Department of Public Health, College of Applied Medical Sciences, Khamis Mushait Campus, King Khalid University, Abha, Saudi Arabia
| | - Dan Bahadur Pal
- Department of Chemical Engineering, Harcourt Butler Technical University, Kanpur, Uttar Pradesh, India
| |
Collapse
|
5
|
Yu Z, Tao R, Guo J, Feng S, Wang Y. Direct Growth of Low Thermal Conductivity WTe 2 Nanocrystalline Films on W Films. NANOMATERIALS (BASEL, SWITZERLAND) 2024; 14:401. [PMID: 38470732 DOI: 10.3390/nano14050401] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/05/2024] [Revised: 02/17/2024] [Accepted: 02/18/2024] [Indexed: 03/14/2024]
Abstract
WTe2 has attracted much attention because of its layered structure and special electronic energy band structure. However, due to the difficulty of evaporating the W element itself and the inactivity of the Te element, the obtained large-area WTe2 thin films are usually accompanied by many defects. In this paper, WTe2 nanocrystalline films were successfully prepared on quartz substrates using magnetron sputtering and chemical vapor deposition techniques. Various analytical techniques such as X-ray Diffraction, Raman spectra, X-ray Photoelectron Spectroscopy, Scanning Electron Microscope, and photoluminescence spectra are employed to analyze the crystal structure, composition, and morphology. The effects of different tellurization temperatures and tellurization times on the properties of WTe2 thin films were investigated. WTe2 nanocrystalline films with good crystallinity were obtained at 600 °C for 30 min. The thermal conductivity of the WTe2 films prepared under this condition was 1.173 Wm-1K-1 at 300 K, which is significantly higher than that of samples prepared using other methods.
Collapse
Affiliation(s)
- Zhisong Yu
- School of Physical Science and Technology, Inner Mongolia University, Hohhot 010021, China
| | - Rong Tao
- School of Physical Science and Technology, Inner Mongolia University, Hohhot 010021, China
| | - Jin Guo
- School of Physical Science and Technology, Inner Mongolia University, Hohhot 010021, China
| | - Shiyi Feng
- School of Physical Science and Technology, Inner Mongolia University, Hohhot 010021, China
| | - Yue Wang
- School of Physical Science and Technology, Inner Mongolia University, Hohhot 010021, China
| |
Collapse
|
6
|
Ravuri S, Wrobel PS, Gorantla S, Bazioti C, Sunding MF, Lis K, Jedrzejewski R, Sartori S, Diplas S, Gunnæs AE, Bachmatiuk A. High yield and wide lateral size growth of α-Mo 2C: exploring the boundaries of CVD growth of bare MXene analogues. NANOTECHNOLOGY 2024; 35:155601. [PMID: 38194713 DOI: 10.1088/1361-6528/ad1c97] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/20/2023] [Accepted: 01/09/2024] [Indexed: 01/11/2024]
Abstract
Synthesis of Mo2C bare MXenes, without surface terminations groups, via chemical vapor deposition (CVD) on metal foils is scientifically a very intriguing crystal growth process, and there are still challenges and limited fundamental understanding to overcome to obtain high yield and wide crystal size lateral growth. Achieving large area coverage via direct growth is scientifically vital to utilize the full potential of their unique properties in different applications. In this study, we sought to expand the boundaries of the current CVD growth approach for Mo2C MXenes and gain insights into the possibilities and limitations of large area growth, with a particular focus on controlling Mo concentration. We report a facile modification of their typical CVD growth protocol and show its influence on the Mo2C synthesis, with growth times spanning up to 3 h. Specifically, prior to initiating the CVD growth process, we introduced a holding step in temperature at 1095 °C. This proved to be beneficial in increasing the Mo concentration on the liquid Cu growth surface. We achieved an average Mo2C crystals coverage of approximately 50% of the growth substrate area, increased tendency of coalescence and merging of individual flakes, and lateral flake sizes up to 170μm wide. To gain deeper understanding into their CVD growth behavior, we conducted a systematic investigation of the effect of several factors, including (i) a holding step time on Mo diffusion rate through molten Cu, (ii) the Cu foil thickness over the Mo foil, and (iii) the CVD growth time. Phase, chemical and microstructural characterization by x-ray diffraction, x-ray photon spectroscopy, SEM and scanning/transmission electron microscopy revealed that the grown crystals are single phaseα-Mo2C. Furthermore, insights gained from this study sheds light on crucial factors and inherent limitations that are essential to consider and may help guide future research progress in CVD growth of bare MXenes.
Collapse
Affiliation(s)
- SyamSai Ravuri
- Łukasiewicz Research Network-PORT Polish Center for Technology Development, ul. Stabłowicka 147, 54-066 Wrocław, Poland
| | - Pawel S Wrobel
- Łukasiewicz Research Network-PORT Polish Center for Technology Development, ul. Stabłowicka 147, 54-066 Wrocław, Poland
- Centre of Polymer and Carbon Materials Polish Academy of Sciences, Marie Curie-Skłodowskiej 34, 41-819 Zabrze, Poland
| | - Sandeep Gorantla
- Łukasiewicz Research Network-PORT Polish Center for Technology Development, ul. Stabłowicka 147, 54-066 Wrocław, Poland
| | - Calliope Bazioti
- Department of Physics, Centre for Materials Science and Nanotechnology, University of Oslo, NO-0371 Oslo, Norway
| | - Martin F Sunding
- Materials Physics-Oslo, SINTEF Industry, PO Box 124, Blindern, Oslo NO-0314, Norway
| | - Krzysztof Lis
- Łukasiewicz Research Network-PORT Polish Center for Technology Development, ul. Stabłowicka 147, 54-066 Wrocław, Poland
| | - Roman Jedrzejewski
- Łukasiewicz Research Network-PORT Polish Center for Technology Development, ul. Stabłowicka 147, 54-066 Wrocław, Poland
| | - Sabrina Sartori
- Department of Technology Systems, University of Oslo, NO-2027 Kjeller, Norway
| | - Spyros Diplas
- Materials Physics-Oslo, SINTEF Industry, PO Box 124, Blindern, Oslo NO-0314, Norway
| | - Anette E Gunnæs
- Department of Physics, Centre for Materials Science and Nanotechnology, University of Oslo, NO-0371 Oslo, Norway
| | - Alicja Bachmatiuk
- Łukasiewicz Research Network-PORT Polish Center for Technology Development, ul. Stabłowicka 147, 54-066 Wrocław, Poland
| |
Collapse
|
7
|
Katiyar AK, Hoang AT, Xu D, Hong J, Kim BJ, Ji S, Ahn JH. 2D Materials in Flexible Electronics: Recent Advances and Future Prospectives. Chem Rev 2024; 124:318-419. [PMID: 38055207 DOI: 10.1021/acs.chemrev.3c00302] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/07/2023]
Abstract
Flexible electronics have recently gained considerable attention due to their potential to provide new and innovative solutions to a wide range of challenges in various electronic fields. These electronics require specific material properties and performance because they need to be integrated into a variety of surfaces or folded and rolled for newly formatted electronics. Two-dimensional (2D) materials have emerged as promising candidates for flexible electronics due to their unique mechanical, electrical, and optical properties, as well as their compatibility with other materials, enabling the creation of various flexible electronic devices. This article provides a comprehensive review of the progress made in developing flexible electronic devices using 2D materials. In addition, it highlights the key aspects of materials, scalable material production, and device fabrication processes for flexible applications, along with important examples of demonstrations that achieved breakthroughs in various flexible and wearable electronic applications. Finally, we discuss the opportunities, current challenges, potential solutions, and future investigative directions about this field.
Collapse
Affiliation(s)
- Ajit Kumar Katiyar
- School of Electrical and Electronic Engineering, Yonsei University, Seoul 03722, Republic of Korea
| | - Anh Tuan Hoang
- School of Electrical and Electronic Engineering, Yonsei University, Seoul 03722, Republic of Korea
| | - Duo Xu
- School of Electrical and Electronic Engineering, Yonsei University, Seoul 03722, Republic of Korea
| | - Juyeong Hong
- School of Electrical and Electronic Engineering, Yonsei University, Seoul 03722, Republic of Korea
| | - Beom Jin Kim
- School of Electrical and Electronic Engineering, Yonsei University, Seoul 03722, Republic of Korea
| | - Seunghyeon Ji
- School of Electrical and Electronic Engineering, Yonsei University, Seoul 03722, Republic of Korea
| | - Jong-Hyun Ahn
- School of Electrical and Electronic Engineering, Yonsei University, Seoul 03722, Republic of Korea
| |
Collapse
|
8
|
Yilmaz E, Yavuz E. Use of transition metal dichalcogenides (TMDs) in analytical sample preparation applications. Talanta 2024; 266:125086. [PMID: 37633038 DOI: 10.1016/j.talanta.2023.125086] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/02/2023] [Revised: 08/10/2023] [Accepted: 08/15/2023] [Indexed: 08/28/2023]
Abstract
Since the discovery of graphene, nano-sized two-dimensional (2D) transition metal dichalcogenides (TMDs) such as MoS2, MoSe2, MoTe2, NbS2, NbSe2, WS2, WSe2, TaS2 and TaSe2, which have been classified as next-generation nanomaterials resembling graphene (G) have complementary basic properties with those of graphene in terms of their practical applications. TMDs are attracting great attention due to their attractive physical, chemical and electronic properties. Despite being overshadowed by graphene in terms of frequency of use, TMDs have been used frequently in many areas in recent years instead of carbon-based materials such as graphene (G), graphene oxide (GO), carbon nanotubes (CNTs) and nanodiamonds (NDs). It is seen that the first and frequent uses of TMDs, which are classified as new generation materials, are in the fields of catalysis, electronic applications, hydrogen production processes and energy storage, but it has been used as an adsorbent in sample preparation techniques in recent years. Similar to graphene, layers of TMDs are held together by weak van der Waals interactions. The sandwiched layers of TMDs provide sufficient and effective interlayer spaces so that foreign molecules, ions and atoms can easily enter these spaces between the layers. Intermolecular interactions increase with the entry of different materials into these spaces, and thus, high activity, adsorption capacity and efficiency are obtained in adsorption-based analytical sample preparation methods. Although there are about 35 research articles using TMDs, which are classified as promising materials in analytical sample preparation techniques, no review studies have been found. This review, which was designed with this awareness, contains important informations on the properties of metal dichalcogenides, their production methods and their use in analytical sample preparation techniques.
Collapse
Affiliation(s)
- Erkan Yilmaz
- Technology Research & Application Center (TAUM), Erciyes University, 38039, Kayseri, Turkey; ERNAM-Erciyes University, Nanotechnology Application and Research Center, 38039, Kayseri, Turkey; Erciyes University, Faculty of Pharmacy, Department of Analytical Chemistry, 38039, Kayseri, Turkey; ChemicaMed Chemical Inc., Erciyes University Technology Development Zone, 38039 Kayseri, Turkey.
| | - Emre Yavuz
- Erzincan Binali Yildirim University, Cayirli Vocational School, Department of Medical Services and Technicians, 24503, Erzincan, Turkey.
| |
Collapse
|
9
|
Naito H, Makino Y, Zhang W, Ogawa T, Endo T, Sannomiya T, Kaneda M, Hashimoto K, Lim HE, Nakanishi Y, Watanabe K, Taniguchi T, Matsuda K, Miyata Y. High-throughput dry transfer and excitonic properties of twisted bilayers based on CVD-grown transition metal dichalcogenides. NANOSCALE ADVANCES 2023; 5:5115-5121. [PMID: 37705802 PMCID: PMC10496764 DOI: 10.1039/d3na00371j] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/30/2023] [Accepted: 08/21/2023] [Indexed: 09/15/2023]
Abstract
van der Waals (vdW) layered materials have attracted much attention because their physical properties can be controlled by varying the twist angle and layer composition. However, such twisted vdW assemblies are often prepared using mechanically exfoliated monolayer flakes with unintended shapes through a time-consuming search for such materials. Here, we report the rapid and dry fabrication of twisted multilayers using chemical vapor deposition (CVD) grown transition metal chalcogenide (TMDC) monolayers. By improving the adhesion of an acrylic resin stamp to the monolayers, the single crystals of various TMDC monolayers with desired grain size and density on a SiO2/Si substrate can be efficiently picked up. The present dry transfer process demonstrates the one-step fabrication of more than 100 twisted bilayers and the sequential stacking of a twisted 10-layer MoS2 single crystal. Furthermore, we also fabricated hBN-encapsulated TMDC monolayers and various twisted bilayers including MoSe2/MoS2, MoSe2/WSe2, and MoSe2/WS2. The interlayer interaction and quality of dry-transferred, CVD-grown TMDCs were characterized by using photoluminescence (PL), cathodoluminescence (CL) spectroscopy, and cross-sectional electron microscopy. The prominent PL peaks of interlayer excitons can be observed for MoSe2/MoS2 and MoSe2/WSe2 with small twist angles at room temperature. We also found that the optical spectra were locally modulated due to nanosized bubbles, which are formed by the presence of interface carbon impurities. The present findings indicate the widely applicable potential of the present method and enable an efficient search of the emergent optical and electrical properties of TMDC-based vdW heterostructures.
Collapse
Affiliation(s)
- Hibiki Naito
- Department of Physics, Tokyo Metropolitan University Hachioji 192-0397 Japan
| | - Yasuyuki Makino
- Department of Physics, Tokyo Metropolitan University Hachioji 192-0397 Japan
| | - Wenjin Zhang
- Department of Physics, Tokyo Metropolitan University Hachioji 192-0397 Japan
| | - Tomoya Ogawa
- Department of Physics, Tokyo Metropolitan University Hachioji 192-0397 Japan
| | - Takahiko Endo
- Department of Physics, Tokyo Metropolitan University Hachioji 192-0397 Japan
| | - Takumi Sannomiya
- Department of Materials Science and Engineering, Tokyo Institute of Technology Yokohama 226-8503 Japan
| | - Masahiko Kaneda
- Department of Physics, Tokyo Metropolitan University Hachioji 192-0397 Japan
| | - Kazuki Hashimoto
- Department of Physics, Tokyo Metropolitan University Hachioji 192-0397 Japan
| | - Hong En Lim
- Department of Chemistry, Saitama University Saitama 338-8570 Japan
| | - Yusuke Nakanishi
- Department of Physics, Tokyo Metropolitan University Hachioji 192-0397 Japan
| | - Kenji Watanabe
- Research Center for Electronic and Optical Materials, NIMS Tsukuba 305-0044 Japan
| | - Takashi Taniguchi
- Research Center for Materials Nanoarchitectonics, NIMS Tsukuba 305-0044 Japan
| | - Kazunari Matsuda
- Institute of Advanced Energy, Kyoto University Kyoto 611-0011 Japan
| | - Yasumitsu Miyata
- Department of Physics, Tokyo Metropolitan University Hachioji 192-0397 Japan
| |
Collapse
|
10
|
Guo S, Germanis S, Taniguchi T, Watanabe K, Withers F, Luxmoore IJ. Electrically Driven Site-Controlled Single Photon Source. ACS PHOTONICS 2023; 10:2549-2555. [PMID: 37602287 PMCID: PMC10436352 DOI: 10.1021/acsphotonics.3c00097] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/18/2023] [Indexed: 08/22/2023]
Abstract
Single photon sources are fundamental building blocks for quantum communication and computing technologies. In this work, we present a device geometry consisting of gold pillars embedded in a van der Waals heterostructure of graphene, hexagonal boron nitride, and tungsten diselenide. The gold pillars serve to both generate strain and inject charge carriers, allowing us to simultaneously demonstrate the positional control and electrical pumping of a single photon emitter. Moreover, increasing the thickness of the hexagonal boron nitride tunnel barriers restricts electroluminescence but enables electrical control of the emission energy of the site-controlled single photon emitters, with measured energy shifts reaching 40 meV.
Collapse
Affiliation(s)
- Shi Guo
- Department
of Physics and Astronomy, University of
Exeter, Exeter EX4 4QL, United
Kingdom
| | - Savvas Germanis
- Department
of Engineering, University of Exeter, Exeter EX4 4QF, United Kingdom
| | - Takashi Taniguchi
- International
Center for Materials Nanoarchitectonics, National Institute for Materials Science, 1-1 Namiki, Tsukuba 305-0044, Japan
| | - Kenji Watanabe
- Research
Center for Functional Materials, National
Institute for Materials Science, 1-1 Namiki, Tsukuba 305-0044, Japan
| | - Freddie Withers
- Department
of Physics and Astronomy, University of
Exeter, Exeter EX4 4QL, United
Kingdom
| | - Isaac J. Luxmoore
- Department
of Engineering, University of Exeter, Exeter EX4 4QF, United Kingdom
| |
Collapse
|
11
|
Sabbaghi S, Bazargan V, Hosseinian E. Defect engineering for thermal transport properties of nanocrystalline molybdenum diselenide. NANOSCALE 2023; 15:12634-12647. [PMID: 37462987 DOI: 10.1039/d3nr01839c] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 08/04/2023]
Abstract
Molybdenum diselenide (MoSe2) is attracting great attention as a transition metal dichalcogenide (TMDC) due to its unique applications in micro-electronics and beyond. In this study, the role of defects in the thermal transport properties of single-layer MoSe2 is investigated using non-equilibrium molecular dynamics (NEMD) simulations. Specifically, this work quantifies how different microstructural defects such as vacancies and grain boundaries (GBs) and their concentration (N) alter the thermal conductivity (TC) of single crystal and nanocrystalline MoSe2. These results show a significant drop in thermal conductivity as the concentration of defects increases. Specifically, point defects lower the TC of MoSe2 in the form of N-β where β is 0.5, 0.48 and 0.36 for VMo, VMo-Se and VSe vacancies, respectively. This study also examines the impact of grain boundaries on the thermal conductivity of nanocrystalline MoSe2. These results suggest that GB migration and stress-assisted twinning along with localized phase transformation (2H to 1T) are the primary factors affecting the thermal conductivity of nanocrystalline MoSe2. Based on MD simulations, TC of polycrystalline MoSe2 increases with the average grain size (d̄) in the form of d̄4.5. For example, the TC of nanocrystalline MoSe2 with d̄ = 11 nm is around 40% lower than the TC of the pristine monocrystalline sample with the same dimensions. Finally, the influence of sample size and temperature is studied to determine the sensitivity of quantitative thermal properties to the length scale and phonon scattering, respectively. The results of this work could provide valuable insights into the role of defects in engineering the thermal properties of next generation semiconductor-based devices.
Collapse
Affiliation(s)
- Soroush Sabbaghi
- Department of Mechanical Engineering, University of Tehran, Tehran, Iran.
| | - Vahid Bazargan
- Department of Mechanical Engineering, University of Tehran, Tehran, Iran.
| | - Ehsan Hosseinian
- Department of Mechanical Engineering, University of Tehran, Tehran, Iran.
| |
Collapse
|
12
|
Lau CS, Das S, Verzhbitskiy IA, Huang D, Zhang Y, Talha-Dean T, Fu W, Venkatakrishnarao D, Johnson Goh KE. Dielectrics for Two-Dimensional Transition-Metal Dichalcogenide Applications. ACS NANO 2023. [PMID: 37257134 DOI: 10.1021/acsnano.3c03455] [Citation(s) in RCA: 6] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/02/2023]
Abstract
Despite over a decade of intense research efforts, the full potential of two-dimensional transition-metal dichalcogenides continues to be limited by major challenges. The lack of compatible and scalable dielectric materials and integration techniques restrict device performances and their commercial applications. Conventional dielectric integration techniques for bulk semiconductors are difficult to adapt for atomically thin two-dimensional materials. This review provides a brief introduction into various common and emerging dielectric synthesis and integration techniques and discusses their applicability for 2D transition metal dichalcogenides. Dielectric integration for various applications is reviewed in subsequent sections including nanoelectronics, optoelectronics, flexible electronics, valleytronics, biosensing, quantum information processing, and quantum sensing. For each application, we introduce basic device working principles, discuss the specific dielectric requirements, review current progress, present key challenges, and offer insights into future prospects and opportunities.
Collapse
Affiliation(s)
- Chit Siong Lau
- Institute of Materials Research and Engineering (IMRE), Agency for Science, Technology and Research (A*STAR), 2 Fusionopolis Way, Innovis #08-03, Singapore 138634, Republic of Singapore
| | - Sarthak Das
- Institute of Materials Research and Engineering (IMRE), Agency for Science, Technology and Research (A*STAR), 2 Fusionopolis Way, Innovis #08-03, Singapore 138634, Republic of Singapore
| | - Ivan A Verzhbitskiy
- Institute of Materials Research and Engineering (IMRE), Agency for Science, Technology and Research (A*STAR), 2 Fusionopolis Way, Innovis #08-03, Singapore 138634, Republic of Singapore
| | - Ding Huang
- Institute of Materials Research and Engineering (IMRE), Agency for Science, Technology and Research (A*STAR), 2 Fusionopolis Way, Innovis #08-03, Singapore 138634, Republic of Singapore
| | - Yiyu Zhang
- Institute of Materials Research and Engineering (IMRE), Agency for Science, Technology and Research (A*STAR), 2 Fusionopolis Way, Innovis #08-03, Singapore 138634, Republic of Singapore
| | - Teymour Talha-Dean
- Institute of Materials Research and Engineering (IMRE), Agency for Science, Technology and Research (A*STAR), 2 Fusionopolis Way, Innovis #08-03, Singapore 138634, Republic of Singapore
- Department of Physics and Astronomy, Queen Mary University of London, London E1 4NS, United Kingdom
| | - Wei Fu
- Institute of Materials Research and Engineering (IMRE), Agency for Science, Technology and Research (A*STAR), 2 Fusionopolis Way, Innovis #08-03, Singapore 138634, Republic of Singapore
| | - Dasari Venkatakrishnarao
- Institute of Materials Research and Engineering (IMRE), Agency for Science, Technology and Research (A*STAR), 2 Fusionopolis Way, Innovis #08-03, Singapore 138634, Republic of Singapore
| | - Kuan Eng Johnson Goh
- Institute of Materials Research and Engineering (IMRE), Agency for Science, Technology and Research (A*STAR), 2 Fusionopolis Way, Innovis #08-03, Singapore 138634, Republic of Singapore
- Department of Physics, National University of Singapore, 2 Science Drive 3, 117551, Singapore
- Division of Physics and Applied Physics, School of Physical and Mathematical Sciences, Nanyang Technological University, 50 Nanyang Avenue 639798, Singapore
| |
Collapse
|
13
|
Kizhepat S, Rasal AS, Chang JY, Wu HF. Development of Two-Dimensional Functional Nanomaterials for Biosensor Applications: Opportunities, Challenges, and Future Prospects. NANOMATERIALS (BASEL, SWITZERLAND) 2023; 13:nano13091520. [PMID: 37177065 PMCID: PMC10180329 DOI: 10.3390/nano13091520] [Citation(s) in RCA: 6] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/23/2023] [Revised: 04/23/2023] [Accepted: 04/27/2023] [Indexed: 05/15/2023]
Abstract
New possibilities for the development of biosensors that are ready to be implemented in the field have emerged thanks to the recent progress of functional nanomaterials and the careful engineering of nanostructures. Two-dimensional (2D) nanomaterials have exceptional physical, chemical, highly anisotropic, chemically active, and mechanical capabilities due to their ultra-thin structures. The diversity of the high surface area, layered topologies, and porosity found in 2D nanomaterials makes them amenable to being engineered with surface characteristics that make it possible for targeted identification. By integrating the distinctive features of several varieties of nanostructures and employing them as scaffolds for bimolecular assemblies, biosensing platforms with improved reliability, selectivity, and sensitivity for the identification of a plethora of analytes can be developed. In this review, we compile a number of approaches to using 2D nanomaterials for biomolecule detection. Subsequently, we summarize the advantages and disadvantages of using 2D nanomaterials in biosensing. Finally, both the opportunities and the challenges that exist within this potentially fruitful subject are discussed. This review will assist readers in understanding the synthesis of 2D nanomaterials, their alteration by enzymes and composite materials, and the implementation of 2D material-based biosensors for efficient bioanalysis and disease diagnosis.
Collapse
Affiliation(s)
- Shamsa Kizhepat
- Department of Chemistry, National Sun Yat-Sen University, Kaohsiung, 70, Lien-Hai Road, Kaohsiung 80424, Taiwan
- Department of Chemical Engineering, National Taiwan University of Science and Technology, Taipei 10607, Taiwan
| | - Akash S Rasal
- Department of Chemical Engineering, National Taiwan University of Science and Technology, Taipei 10607, Taiwan
| | - Jia-Yaw Chang
- Department of Chemical Engineering, National Taiwan University of Science and Technology, Taipei 10607, Taiwan
| | - Hui-Fen Wu
- Department of Chemistry, National Sun Yat-Sen University, Kaohsiung, 70, Lien-Hai Road, Kaohsiung 80424, Taiwan
- School of Pharmacy, College of Pharmacy, Kaohsiung Medical University, Kaohsiung 80708, Taiwan
| |
Collapse
|
14
|
Jeong JH, Jung Y, Park JU, Lee GH. Gate-Tunable Electrostatic Friction of Grain Boundary in Chemical-Vapor-Deposited MoS 2. NANO LETTERS 2023; 23:3085-3089. [PMID: 36780400 DOI: 10.1021/acs.nanolett.2c04958] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/18/2023]
Abstract
Two-dimensional (2D) semiconducting materials, such as MoS2, are widely studied owing to their great potential in advanced electronic devices. However, MoS2 films grown using chemical vapor deposition (CVD) exhibit lower-than-expected properties owing to numerous defects. Among them, grain boundary (GB) is a critical parameter that determines electrical and mechanical properties of MoS2. Herein, we report the gate-tunable electrostatic friction of GBs in CVD-grown MoS2. Using atomic force microscopy (AFM), we found that electrostatic friction of MoS2 is generated by the Coulomb interaction between tip and carriers of MoS2, which is associated with the local band structure of GBs. Therefore, electrostatic friction is enhanced by localized charge carrier distribution at GB, which is linearly related to the loading force of the tip. Our study shows a strong correlation between electrostatic friction and localized band structure in MoS2 GB, providing a novel method for identifying and characterizing GBs of polycrystalline 2D materials.
Collapse
Affiliation(s)
- Jae Hwan Jeong
- Department of Materials Science and Engineering, Yonsei University, Seoul 03722, Korea
| | - Yeonjoon Jung
- Department of Materials Science and Engineering, Seoul National University, Seoul 08826, Korea
| | - Jang-Ung Park
- Department of Materials Science and Engineering, Yonsei University, Seoul 03722, Korea
| | - Gwan-Hyoung Lee
- Department of Materials Science and Engineering, Seoul National University, Seoul 08826, Korea
| |
Collapse
|
15
|
Ogura H, Kawasaki S, Liu Z, Endo T, Maruyama M, Gao Y, Nakanishi Y, Lim HE, Yanagi K, Irisawa T, Ueno K, Okada S, Nagashio K, Miyata Y. Multilayer In-Plane Heterostructures Based on Transition Metal Dichalcogenides for Advanced Electronics. ACS NANO 2023; 17:6545-6554. [PMID: 36847351 DOI: 10.1021/acsnano.2c11927] [Citation(s) in RCA: 5] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/18/2023]
Abstract
In-plane heterostructures of transition metal dichalcogenides (TMDCs) have attracted much attention for high-performance electronic and optoelectronic devices. To date, mainly monolayer-based in-plane heterostructures have been prepared by chemical vapor deposition (CVD), and their optical and electrical properties have been investigated. However, the low dielectric properties of monolayers prevent the generation of high concentrations of thermally excited carriers from doped impurities. To solve this issue, multilayer TMDCs are a promising component for various electronic devices due to the availability of degenerate semiconductors. Here, we report the fabrication and transport properties of multilayer TMDC-based in-plane heterostructures. The multilayer in-plane heterostructures are formed through CVD growth of multilayer MoS2 from the edges of mechanically exfoliated multilayer flakes of WSe2 or NbxMo1-xS2. In addition to the in-plane heterostructures, we also confirmed the vertical growth of MoS2 on the exfoliated flakes. For the WSe2/MoS2 sample, an abrupt composition change is confirmed by cross-sectional high-angle annular dark-field scanning transmission electron microscopy. Electrical transport measurements reveal that a tunneling current flows at the NbxMo1-xS2/MoS2 in-plane heterointerface, and the band alignment is changed from a staggered gap to a broken gap by electrostatic electron doping of MoS2. The formation of a staggered gap band alignment of NbxMo1-xS2/MoS2 is also supported by first-principles calculations.
Collapse
Affiliation(s)
- Hiroto Ogura
- Department of Physics, Tokyo Metropolitan University, Hachioji 192-0397, Japan
| | - Seiya Kawasaki
- Department of Physics, Tokyo Metropolitan University, Hachioji 192-0397, Japan
| | - Zheng Liu
- Innovative Functional Materials Research Institute, National Institute of Advanced Industrial Science and Technology (AIST), Nagoya 463-8560, Japan
| | - Takahiko Endo
- Department of Physics, Tokyo Metropolitan University, Hachioji 192-0397, Japan
| | - Mina Maruyama
- Department of Physics, Graduate School of Pure and Applied Sciences, University of Tsukuba, Tsukuba 305-8571, Japan
| | - Yanlin Gao
- Department of Physics, Graduate School of Pure and Applied Sciences, University of Tsukuba, Tsukuba 305-8571, Japan
| | - Yusuke Nakanishi
- Department of Physics, Tokyo Metropolitan University, Hachioji 192-0397, Japan
| | - Hong En Lim
- Department of Chemistry, Saitama University, Saitama 338-8570, Japan
| | - Kazuhiro Yanagi
- Department of Physics, Tokyo Metropolitan University, Hachioji 192-0397, Japan
| | - Toshifumi Irisawa
- Device Technology Research Institute, National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba 305-8568, Japan
| | - Keiji Ueno
- Department of Chemistry, Saitama University, Saitama 338-8570, Japan
| | - Susumu Okada
- Department of Physics, Graduate School of Pure and Applied Sciences, University of Tsukuba, Tsukuba 305-8571, Japan
| | - Kosuke Nagashio
- Department of Materials Engineering, The University of Tokyo, Tokyo 113-8656, Japan
| | - Yasumitsu Miyata
- Department of Physics, Tokyo Metropolitan University, Hachioji 192-0397, Japan
| |
Collapse
|
16
|
Li W, Xu M, Gao J, Zhang X, Huang H, Zhao R, Zhu X, Yang Y, Luo L, Chen M, Ji H, Zheng L, Wang X, Huang W. Large-Scale Ultra-Robust MoS 2 Patterns Directly Synthesized on Polymer Substrate for Flexible Sensing Electronics. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2023; 35:e2207447. [PMID: 36353895 DOI: 10.1002/adma.202207447] [Citation(s) in RCA: 14] [Impact Index Per Article: 14.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/15/2022] [Revised: 11/02/2022] [Indexed: 06/16/2023]
Abstract
Synthesis of large-area patterned MoS2 is considered the principle base for realizing high-performance MoS2 -based flexible electronic devices. Patterning and transferring MoS2 films to target flexible substrates, however, require conventional multi-step photolithography patterning and transferring process, despite tremendous progress in the facilitation of practical applications. Herein, an approach to directly synthesize large-scale MoS2 patterns that combines inkjet printing and thermal annealing is reported. An optimal precursor ink is prepared that can deposit arbitrary patterns on polyimide films. By introducing a gas atmosphere of argon/hydrogen (Ar/H2 ), thermal treatment at 350 °C enables an in situ decomposition and crystallization in the patterned precursors and, consequently, results in the formation of MoS2 . Without complicated processes, patterned MoS2 is obtained directly on polymer substrate, exhibiting superior mechanical flexibility and durability (≈2% variation in resistance over 10,000 bending cycles), as well as excellent chemical stability, which is attributed to the generated continuous and thin microstructures, as well as their strong adhesion with the substrate. As a step further, this approach is employed to manufacture various flexible sensing devices that are insensitive to body motions and moisture, including temperature sensors and biopotential sensing systems for real-time, continuously monitoring skin temperature, electrocardiography, and electromyography signals.
Collapse
Affiliation(s)
- Weiwei Li
- Frontiers Science Center for Flexible Electronics (FSCFE) & Shaanxi Institute of Flexible Electronics (SIFE), Northwestern Polytechnical University (NPU), 127 West Youyi Road, Xi'an, 710072, China
- Shaanxi Key Laboratory of Flexible Electronics (KLoFE), Northwestern Polytechnical University (NPU), 127 West Youyi Road, Xi'an, 710072, China
- MIIT Key Laboratory of Flexible Electronics (KLoFE), Northwestern Polytechnical University (NPU), 127 West Youyi Road, Xi'an, 710072, China
| | - Manzhang Xu
- Frontiers Science Center for Flexible Electronics (FSCFE) & Shaanxi Institute of Flexible Electronics (SIFE), Northwestern Polytechnical University (NPU), 127 West Youyi Road, Xi'an, 710072, China
- Shaanxi Key Laboratory of Flexible Electronics (KLoFE), Northwestern Polytechnical University (NPU), 127 West Youyi Road, Xi'an, 710072, China
- MIIT Key Laboratory of Flexible Electronics (KLoFE), Northwestern Polytechnical University (NPU), 127 West Youyi Road, Xi'an, 710072, China
| | - Jiuwei Gao
- Frontiers Science Center for Flexible Electronics (FSCFE) & Shaanxi Institute of Flexible Electronics (SIFE), Northwestern Polytechnical University (NPU), 127 West Youyi Road, Xi'an, 710072, China
- Shaanxi Key Laboratory of Flexible Electronics (KLoFE), Northwestern Polytechnical University (NPU), 127 West Youyi Road, Xi'an, 710072, China
- MIIT Key Laboratory of Flexible Electronics (KLoFE), Northwestern Polytechnical University (NPU), 127 West Youyi Road, Xi'an, 710072, China
| | - Xiaoshan Zhang
- Frontiers Science Center for Flexible Electronics (FSCFE) & Shaanxi Institute of Flexible Electronics (SIFE), Northwestern Polytechnical University (NPU), 127 West Youyi Road, Xi'an, 710072, China
- Shaanxi Key Laboratory of Flexible Electronics (KLoFE), Northwestern Polytechnical University (NPU), 127 West Youyi Road, Xi'an, 710072, China
- MIIT Key Laboratory of Flexible Electronics (KLoFE), Northwestern Polytechnical University (NPU), 127 West Youyi Road, Xi'an, 710072, China
| | - He Huang
- Frontiers Science Center for Flexible Electronics (FSCFE) & Shaanxi Institute of Flexible Electronics (SIFE), Northwestern Polytechnical University (NPU), 127 West Youyi Road, Xi'an, 710072, China
- Shaanxi Key Laboratory of Flexible Electronics (KLoFE), Northwestern Polytechnical University (NPU), 127 West Youyi Road, Xi'an, 710072, China
- MIIT Key Laboratory of Flexible Electronics (KLoFE), Northwestern Polytechnical University (NPU), 127 West Youyi Road, Xi'an, 710072, China
| | - Ruoqing Zhao
- Frontiers Science Center for Flexible Electronics (FSCFE) & Shaanxi Institute of Flexible Electronics (SIFE), Northwestern Polytechnical University (NPU), 127 West Youyi Road, Xi'an, 710072, China
- Shaanxi Key Laboratory of Flexible Electronics (KLoFE), Northwestern Polytechnical University (NPU), 127 West Youyi Road, Xi'an, 710072, China
- MIIT Key Laboratory of Flexible Electronics (KLoFE), Northwestern Polytechnical University (NPU), 127 West Youyi Road, Xi'an, 710072, China
| | - Xigang Zhu
- Frontiers Science Center for Flexible Electronics (FSCFE) & Shaanxi Institute of Flexible Electronics (SIFE), Northwestern Polytechnical University (NPU), 127 West Youyi Road, Xi'an, 710072, China
- Shaanxi Key Laboratory of Flexible Electronics (KLoFE), Northwestern Polytechnical University (NPU), 127 West Youyi Road, Xi'an, 710072, China
- MIIT Key Laboratory of Flexible Electronics (KLoFE), Northwestern Polytechnical University (NPU), 127 West Youyi Road, Xi'an, 710072, China
| | - Yabao Yang
- Frontiers Science Center for Flexible Electronics (FSCFE) & Shaanxi Institute of Flexible Electronics (SIFE), Northwestern Polytechnical University (NPU), 127 West Youyi Road, Xi'an, 710072, China
- Shaanxi Key Laboratory of Flexible Electronics (KLoFE), Northwestern Polytechnical University (NPU), 127 West Youyi Road, Xi'an, 710072, China
- MIIT Key Laboratory of Flexible Electronics (KLoFE), Northwestern Polytechnical University (NPU), 127 West Youyi Road, Xi'an, 710072, China
| | - Lei Luo
- Frontiers Science Center for Flexible Electronics (FSCFE) & Shaanxi Institute of Flexible Electronics (SIFE), Northwestern Polytechnical University (NPU), 127 West Youyi Road, Xi'an, 710072, China
- Shaanxi Key Laboratory of Flexible Electronics (KLoFE), Northwestern Polytechnical University (NPU), 127 West Youyi Road, Xi'an, 710072, China
- MIIT Key Laboratory of Flexible Electronics (KLoFE), Northwestern Polytechnical University (NPU), 127 West Youyi Road, Xi'an, 710072, China
| | - Mengdi Chen
- Frontiers Science Center for Flexible Electronics (FSCFE) & Shaanxi Institute of Flexible Electronics (SIFE), Northwestern Polytechnical University (NPU), 127 West Youyi Road, Xi'an, 710072, China
- Shaanxi Key Laboratory of Flexible Electronics (KLoFE), Northwestern Polytechnical University (NPU), 127 West Youyi Road, Xi'an, 710072, China
- MIIT Key Laboratory of Flexible Electronics (KLoFE), Northwestern Polytechnical University (NPU), 127 West Youyi Road, Xi'an, 710072, China
| | - Hongjia Ji
- Frontiers Science Center for Flexible Electronics (FSCFE) & Shaanxi Institute of Flexible Electronics (SIFE), Northwestern Polytechnical University (NPU), 127 West Youyi Road, Xi'an, 710072, China
- Shaanxi Key Laboratory of Flexible Electronics (KLoFE), Northwestern Polytechnical University (NPU), 127 West Youyi Road, Xi'an, 710072, China
- MIIT Key Laboratory of Flexible Electronics (KLoFE), Northwestern Polytechnical University (NPU), 127 West Youyi Road, Xi'an, 710072, China
| | - Lu Zheng
- Frontiers Science Center for Flexible Electronics (FSCFE) & Shaanxi Institute of Flexible Electronics (SIFE), Northwestern Polytechnical University (NPU), 127 West Youyi Road, Xi'an, 710072, China
- Shaanxi Key Laboratory of Flexible Electronics (KLoFE), Northwestern Polytechnical University (NPU), 127 West Youyi Road, Xi'an, 710072, China
- MIIT Key Laboratory of Flexible Electronics (KLoFE), Northwestern Polytechnical University (NPU), 127 West Youyi Road, Xi'an, 710072, China
| | - Xuewen Wang
- Frontiers Science Center for Flexible Electronics (FSCFE) & Shaanxi Institute of Flexible Electronics (SIFE), Northwestern Polytechnical University (NPU), 127 West Youyi Road, Xi'an, 710072, China
- Shaanxi Key Laboratory of Flexible Electronics (KLoFE), Northwestern Polytechnical University (NPU), 127 West Youyi Road, Xi'an, 710072, China
- MIIT Key Laboratory of Flexible Electronics (KLoFE), Northwestern Polytechnical University (NPU), 127 West Youyi Road, Xi'an, 710072, China
- Key Laboratory of Flexible Electronics of Zhejiang Province, Ningbo Institute of Northwestern Polytechnical University, 218 Qingyi Road, Ningbo, 315103, China
| | - Wei Huang
- Frontiers Science Center for Flexible Electronics (FSCFE) & Shaanxi Institute of Flexible Electronics (SIFE), Northwestern Polytechnical University (NPU), 127 West Youyi Road, Xi'an, 710072, China
- Shaanxi Key Laboratory of Flexible Electronics (KLoFE), Northwestern Polytechnical University (NPU), 127 West Youyi Road, Xi'an, 710072, China
- MIIT Key Laboratory of Flexible Electronics (KLoFE), Northwestern Polytechnical University (NPU), 127 West Youyi Road, Xi'an, 710072, China
- State Key Laboratory of Organic Electronics and Information Displays, Institute of Advanced Materials (IAM), Nanjing University of Posts & Telecommunications, Nanjing, 210023, China
- Key Laboratory of Flexible Electronics(KLoFE)and Institute of Advanced Materials (IAM), Nanjing Tech University (NanjingTech), Nanjing, 211800, China
| |
Collapse
|
17
|
Nhan LC, Vi VT, Du DX, Cuong NQ, Hieu NN, Linh TP. Density functional theory investigations of PbSnX 2 (X = S, Se, Te) monolayers: Structural and electronic properties. Chem Phys 2022. [DOI: 10.1016/j.chemphys.2022.111797] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/13/2022]
|
18
|
Cho S, Huh S, Fang Y, Hua C, Bai H, Jiang Z, Liu Z, Liu J, Chen Z, Fukushima Y, Harasawa A, Kawaguchi K, Shin S, Kondo T, Lu Y, Mu G, Huang F, Shen D. Direct Observation of the Topological Surface State in the Topological Superconductor 2M-WS 2. NANO LETTERS 2022; 22:8827-8834. [PMID: 36367457 DOI: 10.1021/acs.nanolett.2c02372] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/16/2023]
Abstract
The quantum spin Hall (QSH) effect has attracted extensive research interest because of the potential applications in spintronics and quantum computing, which is attributable to two conducting edge channels with opposite spin polarization and the quantized electronic conductance of 2e2/h. Recently, 2M-WS2, a new stable phase of transition metal dichalcogenides with a 2M structure showing a layer configuration identical to that of the monolayer 1T' TMDs, was suggested to be a QSH insulator as well as a superconductor with a critical transition temperature of around 8 K. Here, high-resolution angle-resolved photoemission spectroscopy (ARPES) and spin-resolved ARPES are applied to investigate the electronic and spin structure of the topological surface states (TSS) in the superconducting 2M-WS2. The TSS exhibit characteristic spin-momentum-locking behavior, suggesting the existence of long-sought nontrivial Z2 topological states therein. We expect that 2M-WS2 with coexisting superconductivity and TSS might host the promising Majorana bound states.
Collapse
Affiliation(s)
- Soohyun Cho
- State Key Laboratory of Functional Materials for Informatics, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Shanghai200050, People's Republic of China
- Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences, Beijing100049, People's Republic of China
| | - Soonsang Huh
- Institute for Solid State Physics, The University of Tokyo, Kashiwa, Chiba277-8581, Japan
| | - Yuqiang Fang
- State Key Laboratory of High Performance Ceramics and Superfine Microstructure, Shanghai Institute of Ceramics, Chinese Academy of Science, Shanghai200050, People's Republic of China
- State Key Laboratory of Rare Earth Materials Chemistry and Applications, College of Chemistry and Molecular Engineering, Peking University, Beijing100871, People's Republic of China
| | - Chenqiang Hua
- Zhejiang Province Key Laboratory of Quantum Technology and Device, School of Physics, Zhejiang University, Hangzhou310027, People's Republic of China
| | - Hua Bai
- Zhejiang Province Key Laboratory of Quantum Technology and Device, School of Physics, Zhejiang University, Hangzhou310027, People's Republic of China
| | - Zhicheng Jiang
- State Key Laboratory of Functional Materials for Informatics, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Shanghai200050, People's Republic of China
| | - Zhengtai Liu
- State Key Laboratory of Functional Materials for Informatics, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Shanghai200050, People's Republic of China
- Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences, Beijing100049, People's Republic of China
| | - Jishan Liu
- State Key Laboratory of Functional Materials for Informatics, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Shanghai200050, People's Republic of China
- Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences, Beijing100049, People's Republic of China
| | - Zhenhua Chen
- Shanghai Synchrotron Facility, Shanghai Advanced Research Institute, Chinese Academy of Sciences, Shanghai201204, People's Republic of China
| | - Yuto Fukushima
- Institute for Solid State Physics, The University of Tokyo, Kashiwa, Chiba277-8581, Japan
| | - Ayumi Harasawa
- Institute for Solid State Physics, The University of Tokyo, Kashiwa, Chiba277-8581, Japan
| | - Kaishu Kawaguchi
- Institute for Solid State Physics, The University of Tokyo, Kashiwa, Chiba277-8581, Japan
| | - Shik Shin
- Institute for Solid State Physics, The University of Tokyo, Kashiwa, Chiba277-8581, Japan
| | - Takeshi Kondo
- Trans-Scale Quantum Science Institute, The University of Tokyo, Bunkyo-ku, Tokyo113-0033, Japan
- Institute for Solid State Physics, The University of Tokyo, Kashiwa, Chiba277-8581, Japan
| | - Yunhao Lu
- Zhejiang Province Key Laboratory of Quantum Technology and Device, School of Physics, Zhejiang University, Hangzhou310027, People's Republic of China
| | - Gang Mu
- State Key Laboratory of Functional Materials for Informatics, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Shanghai200050, People's Republic of China
| | - Fuqiang Huang
- State Key Laboratory of High Performance Ceramics and Superfine Microstructure, Shanghai Institute of Ceramics, Chinese Academy of Science, Shanghai200050, People's Republic of China
- State Key Laboratory of Rare Earth Materials Chemistry and Applications, College of Chemistry and Molecular Engineering, Peking University, Beijing100871, People's Republic of China
| | - Dawei Shen
- State Key Laboratory of Functional Materials for Informatics, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Shanghai200050, People's Republic of China
- Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences, Beijing100049, People's Republic of China
| |
Collapse
|
19
|
Liu HY, Wu JY. Feature-Rich Electronic Properties of Sliding Bilayer Germanene. ACS OMEGA 2022; 7:42304-42312. [PMID: 36440158 PMCID: PMC9686190 DOI: 10.1021/acsomega.2c05219] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 08/14/2022] [Accepted: 10/31/2022] [Indexed: 06/16/2023]
Abstract
This study employs first-principles calculations to elucidate the properties of sliding bilayer germanene (BLGe). The buckled structure of germanene can afford a greater number of metastable stacking configurations than planar graphene and enrich the electronic properties. Herein, a detailed analysis of the structural variety, shift-dependent energy bands, and spatial charge densities of BLGe is presented. The projected density of states (PDOS) reveals diverse structures such as plateaus, dips, symmetric/asymmetric peaks, and shoulders. The low-lying ones of the prominent structures could correspond to single or multiorbital hybridization, depending on the stacking configuration.
Collapse
Affiliation(s)
- Hsin-Yi Liu
- Department
of Physics/QTC/Hi-GEM, National Cheng Kung
University, Tainan 70148, Taiwan
| | - Jhao-Ying Wu
- Center
of General Studies, National Kaohsiung University
of Science and Technology, Kaohsiung 811213, Taiwan
- Department
of Energy and Refrigerating Air-Conditioning Engineering, National Kaohsiung University of Science and Technology, Kaohsiung 811213, Taiwan
| |
Collapse
|
20
|
Okada M, Pu J, Lin YC, Endo T, Okada N, Chang WH, Lu AKA, Nakanishi T, Shimizu T, Kubo T, Miyata Y, Suenaga K, Takenobu T, Yamada T, Irisawa T. Large-Scale 1T'-Phase Tungsten Disulfide Atomic Layers Grown by Gas-Source Chemical Vapor Deposition. ACS NANO 2022; 16:13069-13081. [PMID: 35849128 DOI: 10.1021/acsnano.2c05699] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
Abstract
The control of crystal polymorphism and exploration of metastable, two-dimensional, 1T'-phase, transition-metal dichalcogenides (TMDs) have received considerable research attention. 1T'-phase TMDs are expected to offer various opportunities for the study of basic condensed matter physics and for its use in important applications, such as devices with topological states for quantum computing, low-resistance contact for semiconducting TMDs, energy storage devices, and as hydrogen evolution catalysts. However, due to the high energy difference and phase change barrier between 1T' and the more stable 2H-phase, there are few methods that can be used to obtain monolayer 1T'-phase TMDs. Here, we report on the chemical vapor deposition (CVD) growth of 1T'-phase WS2 atomic layers from gaseous precursors, i.e., H2S and WF6, with alkali metal assistance. The gaseous nature of the precursors, reducing properties of H2S, and presence of Na+, which acts as a countercation, provided an optimal environment for the growth of 1T'-phase WS2, resulting in the formation of high-quality submillimeter-sized crystals. The crystal structure was characterized by atomic-resolution scanning transmission electron microscopy, and the zigzag chain structure of W atoms, which is characteristic of the 1T' structure, was clearly observed. Furthermore, the grown 1T'-phase WS2 showed superconductivity with the transition temperature in the 2.8-3.4 K range and large upper critical field anisotropy. Thus, alkali metal assisted gas-source CVD growth is useful for realizing large-scale, high-quality, phase-engineered TMD atomic layers via a bottom-up synthesis.
Collapse
Affiliation(s)
- Mitsuhiro Okada
- Nano Carbon Device Research Center, National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba 305-8565, Japan
- Nanomaterials Research Institute, National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba 305-8565, Japan
| | - Jiang Pu
- Department of Applied Physics, Nagoya University, Nagoya 464-8603, Japan
| | - Yung-Chang Lin
- Nanomaterials Research Institute, National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba 305-8565, Japan
| | - Takahiko Endo
- Department of Physics, Tokyo Metropolitan University, Hachioji 192-0397, Japan
| | - Naoya Okada
- Device Technology Research Institute, National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba 305-8568, Japan
| | - Wen-Hsin Chang
- Device Technology Research Institute, National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba 305-8568, Japan
| | - Anh Khoa Augustin Lu
- Mathematics for Advanced Materials Open Innovation Laboratory, National Institute of Advanced Industrial Science and Technology (AIST), Sendai 980-8577, Japan
- International Center for Materials Nanoarchitectonics (MANA), National Institute for Materials Science (NIMS), Tsukuba 305-0044, Japan
| | - Takeshi Nakanishi
- Mathematics for Advanced Materials Open Innovation Laboratory, National Institute of Advanced Industrial Science and Technology (AIST), Sendai 980-8577, Japan
| | - Tetsuo Shimizu
- Nanomaterials Research Institute, National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba 305-8565, Japan
| | - Toshitaka Kubo
- Nanomaterials Research Institute, National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba 305-8565, Japan
| | - Yasumitsu Miyata
- Department of Physics, Tokyo Metropolitan University, Hachioji 192-0397, Japan
| | - Kazu Suenaga
- Nanomaterials Research Institute, National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba 305-8565, Japan
- The Institute of Scientific and Industrial Research (ISIR-SANKEN), Osaka University, Osaka 567-0047, Japan
| | - Taishi Takenobu
- Department of Applied Physics, Nagoya University, Nagoya 464-8603, Japan
| | - Takatoshi Yamada
- Nano Carbon Device Research Center, National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba 305-8565, Japan
- Nanomaterials Research Institute, National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba 305-8565, Japan
| | - Toshifumi Irisawa
- Device Technology Research Institute, National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba 305-8568, Japan
| |
Collapse
|
21
|
Yang J, Hu X, Zhang W. Electrochemical self-signal identification of Kirsten rat sarcoma virus oncogene based on riboflavin 5′-(trihydrogen diphosphate) functionalized WS2 nanosheets. J APPL ELECTROCHEM 2022. [DOI: 10.1007/s10800-022-01739-1] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/27/2022]
|
22
|
de Freitas N, Florindo BR, Freitas VMS, Piazzetta MHDO, Ospina CA, Bettini J, Strauss M, Leite ER, Gobbi AL, Lima RS, Santhiago M. Fast and efficient electrochemical thinning of ultra-large supported and free-standing MoS 2 layers on gold surfaces. NANOSCALE 2022; 14:6811-6821. [PMID: 35388391 DOI: 10.1039/d2nr00491g] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/14/2023]
Abstract
Molybdenum disulfide (MoS2) is a very promising layered material for electrical, optical, and electrochemical applications because of its unique and outstanding properties. To unlock its full potential, among different preparation routes, electrochemistry has gain interest due to its simple, fast, scalable and simple instrumentation. However, obtaining large-area monolayer MoS2 that will enable the fabrication of novel electronic and electrochemical devices is still challenging. In this work, we reported a simple and fast electrochemical thinning process that results in ultra-large MoS2 down to monolayer on Au surfaces. The high affinity of MoS2 by Au surfaces enables the removal of bulk layers while preserving the first layer attached to the electrode. With a proper choice of the applied potential, more than 90% of the bulk regions can be removed from large-area MoS2 crystals, as confirmed by atomic force microscopy, photoluminescence, and Raman spectroscopy. We further address a set of contributions that are helpful to elucidate the features of MoS2, namely, the hyphenation of electrochemistry and optical microscopy for real-time observation of the thinning process that was revealed to occur from the edges to the center of the flake, an image treatment to estimate the thinning area and thinning rate, and the preparation of free-standing MoS2 layers by electrochemically thinning bulk flakes on microhole-structured Ni/Au meshes.
Collapse
Affiliation(s)
- Nicolli de Freitas
- Brazilian Nanotechnology National Laboratory, Brazilian Center for Research in Energy and Materials, Campinas, São Paulo 13083-970, Brazil.
| | - Bianca R Florindo
- Brazilian Nanotechnology National Laboratory, Brazilian Center for Research in Energy and Materials, Campinas, São Paulo 13083-970, Brazil.
| | - Vitória M S Freitas
- Brazilian Nanotechnology National Laboratory, Brazilian Center for Research in Energy and Materials, Campinas, São Paulo 13083-970, Brazil.
| | - Maria H de O Piazzetta
- Brazilian Nanotechnology National Laboratory, Brazilian Center for Research in Energy and Materials, Campinas, São Paulo 13083-970, Brazil.
| | - Carlos A Ospina
- Brazilian Nanotechnology National Laboratory, Brazilian Center for Research in Energy and Materials, Campinas, São Paulo 13083-970, Brazil.
| | - Jefferson Bettini
- Brazilian Nanotechnology National Laboratory, Brazilian Center for Research in Energy and Materials, Campinas, São Paulo 13083-970, Brazil.
| | - Mathias Strauss
- Brazilian Nanotechnology National Laboratory, Brazilian Center for Research in Energy and Materials, Campinas, São Paulo 13083-970, Brazil.
- Federal University of ABC, Santo André, São Paulo 09210-580, Brazil
| | - Edson R Leite
- Brazilian Nanotechnology National Laboratory, Brazilian Center for Research in Energy and Materials, Campinas, São Paulo 13083-970, Brazil.
- São Carlos Institute of Chemistry, University of São Paulo, São Carlos, São Paulo 09210-580, Brazil
| | - Angelo L Gobbi
- Brazilian Nanotechnology National Laboratory, Brazilian Center for Research in Energy and Materials, Campinas, São Paulo 13083-970, Brazil.
| | - Renato S Lima
- Brazilian Nanotechnology National Laboratory, Brazilian Center for Research in Energy and Materials, Campinas, São Paulo 13083-970, Brazil.
- Federal University of ABC, Santo André, São Paulo 09210-580, Brazil
- Institute of Chemistry, University of Campinas, Campinas, São Paulo 13083-970, Brazil
- São Carlos Institute of Chemistry, University of São Paulo, São Carlos, São Paulo 09210-580, Brazil
| | - Murilo Santhiago
- Brazilian Nanotechnology National Laboratory, Brazilian Center for Research in Energy and Materials, Campinas, São Paulo 13083-970, Brazil.
- Federal University of ABC, Santo André, São Paulo 09210-580, Brazil
| |
Collapse
|
23
|
Jeong JH, Kang S, Kim N, Joshi RK, Lee GH. Recent trends in covalent functionalization of 2D materials. Phys Chem Chem Phys 2022; 24:10684-10711. [DOI: 10.1039/d1cp04831g] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
Covalent functionalization of the surface is more crucial in 2D materials than in conventional bulk materials because of their atomic thinness, large surface-to-volume ratio, and uniform surface chemical potential. Because...
Collapse
|
24
|
Linh TPT, Hieu NN, Phuc HV, Nguyen CQ, Vinh PT, Thai NQ, Hieu NV. First-principles insights onto structural, electronic and optical properties of Janus monolayers CrXO (X = S, Se, Te). RSC Adv 2021; 11:39672-39679. [PMID: 35494112 PMCID: PMC9044576 DOI: 10.1039/d1ra07876c] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/26/2021] [Accepted: 12/07/2021] [Indexed: 11/21/2022] Open
Abstract
The lacking of the vertical mirror symmetry in Janus structures compared to their conventional metal monochalcogenides/dichalcogenides leads to their characteristic properties, which are predicted to play significant roles for various promising applications. In this framework, we systematically examine the structural, mechanical, electronic, and optical properties of the two-dimensional 2H Janus CrXO (X = S, Se, Te) monolayers by using first-principles calculation method based on density functional theory. The obtained results from optimization, phonon spectra, and elastic constants demonstrate that all three Janus monolayers present good structural and mechanical stabilities. The calculated elastic constants also indicate that the Janus CrTeO monolayer is much mechanically flexible than the other two monolayers due to its low Young's modulus value. The metallic behavior is observed at the ground state for the Janus CrSeO and CrTeO monolayers in both PBE and HSE06 levels. Meanwhile, the Janus CrSO monolayer exhibits a low indirect semiconducting characteristic. The bandgap of CrSO after the correction of HSE06 hybrid functional is the average value of its binary transition metal dichalcogenides. The broad absorption spectrum of CrSO reveals the wide activated range from the visible to near-ultraviolet region. Our findings not only present insight into the brand-new Janus CrXO monolayers but can also motivate experimental research for several applications in optoelectric and nanoelectromechanical devices.
Collapse
Affiliation(s)
- Tran P T Linh
- Faculty of Physics, Hanoi National University of Education Ha Noi 100000 Viet Nam
| | - Nguyen N Hieu
- Institute of Research and Development, Duy Tan University Da Nang 550000 Viet Nam .,Faculty of Natural Sciences, Duy Tan University Da Nang 550000 Viet Nam
| | - Huynh V Phuc
- Division of Theoretical Physics, Dong Thap University Cao Lanh 870000 Viet Nam
| | - Cuong Q Nguyen
- Institute of Research and Development, Duy Tan University Da Nang 550000 Viet Nam .,Faculty of Natural Sciences, Duy Tan University Da Nang 550000 Viet Nam
| | - Pham T Vinh
- Division of Theoretical Physics, Dong Thap University Cao Lanh 870000 Viet Nam
| | - Nguyen Q Thai
- Division of Theoretical Physics, Dong Thap University Cao Lanh 870000 Viet Nam
| | - Nguyen V Hieu
- Physics Department, The University of Danang - University of Science and Education Da Nang 550000 Viet Nam
| |
Collapse
|
25
|
Vu TV, Linh TPT, Phuc HV, Duque CA, Kartamyshev AI, Hieu NN. Structural, electronic, and transport properties of Janus GaIn X2( X=S, Se, Te) monolayers: first-principles study. JOURNAL OF PHYSICS. CONDENSED MATTER : AN INSTITUTE OF PHYSICS JOURNAL 2021; 34:045501. [PMID: 34670205 DOI: 10.1088/1361-648x/ac316e] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/18/2021] [Accepted: 10/20/2021] [Indexed: 06/13/2023]
Abstract
Two-dimensional Janus monolayers have outstanding electronic and transport properties due to their asymmetric atomic structures. In the present work, we systematically study the structural, electronic, and transport properties of the Janus GaInX2(X= S, Se, Te) monolayers by using the first-principles calculations. The stability of the investigated monolayers is confirmed via the analysis of vibrational spectrum and molecular dynamics simulations. Our calculations demonstrate that while GaInS2and GaInSe2monolayers are direct semiconductors, GaInTe2monolayer exhibits the characteristics of an indirect semiconductor. The band gap of GaInX2decreases when the chalcogen elementXvaries from S to Te. Obtained results reveal that small spin-orbit splitting energy in the valence band is found around the Γ point of the Brillouin zone when the spin-orbit coupling is included. Interestingly, GaInS2and GaInSe2have high and directional isotropic electron mobility meanwhile the directional anisotropy of the electron mobility is found in the Janus GaInTe2monolayer. Our findings not only present superior physical properties of GaInX2monolayers but also show promising potential applications of these materials in nanoelectronic devices.
Collapse
Affiliation(s)
- Tuan V Vu
- Division of Computational Physics, Institute for Computational Science, Ton Duc Thang University, Ho Chi Minh City 700000, Vietnam
- Faculty of Electrical & Electronics Engineering, Ton Duc Thang University, Ho Chi Minh City 700000, Vietnam
| | - Tran P T Linh
- Faculty of Physics, Hanoi National University of Education, Ha Noi 100000, Vietnam
| | - Huynh V Phuc
- Division of Theoretical Physics, Dong Thap University, Cao Lanh 870000, Vietnam
| | - C A Duque
- Grupo de Materia Condensada-UdeA, Instituto de Física, Facultad de Ciencias Exactas y Naturales, Universidad de Antioquia UdeA, Calle 70 No. 52-21, Medellín, Colombia
| | - A I Kartamyshev
- Division of Computational Physics, Institute for Computational Science, Ton Duc Thang University, Ho Chi Minh City 700000, Vietnam
- Faculty of Electrical & Electronics Engineering, Ton Duc Thang University, Ho Chi Minh City 700000, Vietnam
| | - Nguyen N Hieu
- Institute of Research and Development, Duy Tan University, Da Nang 550000, Vietnam
- Faculty of Natural Sciences, Duy Tan University, Da Nang 550000, Vietnam
| |
Collapse
|
26
|
Ogura H, Kaneda M, Nakanishi Y, Nonoguchi Y, Pu J, Ohfuchi M, Irisawa T, Lim HE, Endo T, Yanagi K, Takenobu T, Miyata Y. Air-stable and efficient electron doping of monolayer MoS 2 by salt-crown ether treatment. NANOSCALE 2021; 13:8784-8789. [PMID: 33928997 DOI: 10.1039/d1nr01279g] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/12/2023]
Abstract
To maximize the potential of transition-metal dichalcogenides (TMDCs) in device applications, the development of a sophisticated technique for stable and highly efficient carrier doping is critical. Here, we report the efficient n-type doping of monolayer MoS2 using KOH/benzo-18-crown-6, resulting in a doped TMDC that is air-stable. MoS2 field-effect transistors show an increase in on-current of three orders of magnitude and degenerate the n-type behaviour with high air-stability for ∼1 month as the dopant concentration increases. Transport measurements indicate a high electron density of 3.4 × 1013 cm-2 and metallic-type temperature dependence for highly doped MoS2. First-principles calculations support electron doping via surface charge transfer from the K/benzo-18-crown-6 complex to monolayer MoS2. Patterned doping is demonstrated to improve the contact resistance in MoS2-based devices.
Collapse
Affiliation(s)
- Hiroto Ogura
- Department of Physics, Tokyo Metropolitan University, Hachioji, 192-0397, Japan.
| | - Masahiko Kaneda
- Department of Physics, Tokyo Metropolitan University, Hachioji, 192-0397, Japan.
| | - Yusuke Nakanishi
- Department of Physics, Tokyo Metropolitan University, Hachioji, 192-0397, Japan.
| | - Yoshiyuki Nonoguchi
- Faculty of Materials Science and Engineering, Kyoto Institute of Technology, Kyoto 606-8585, Japan
| | - Jiang Pu
- Department of Applied Physics, Nagoya University, Nagoya, 464-8603, Japan
| | - Mari Ohfuchi
- Fujitsu Laboratories Ltd, Atsugi, 243-0197, Japan
| | | | - Hong En Lim
- Department of Physics, Tokyo Metropolitan University, Hachioji, 192-0397, Japan.
| | - Takahiko Endo
- Department of Physics, Tokyo Metropolitan University, Hachioji, 192-0397, Japan.
| | - Kazuhiro Yanagi
- Department of Physics, Tokyo Metropolitan University, Hachioji, 192-0397, Japan.
| | - Taishi Takenobu
- Department of Applied Physics, Nagoya University, Nagoya, 464-8603, Japan
| | - Yasumitsu Miyata
- Department of Physics, Tokyo Metropolitan University, Hachioji, 192-0397, Japan.
| |
Collapse
|