Controlling the growth of a SiO2 coating on hydrophobic CsPbBr3 nanocrystals towards aqueous transfer and high luminescence

Solvent-tuned perovskite heterostructures enable visual linoleic acid assay and edible oil species discrimination via wavelength shift

Linoleic acid (LA) detection and edible oils discrimination are essential for food safety. Recently, CsPbBr3@SiO2 heterostructures have been widely applied in edible oil assays, while deep insights into solvent effects on their structure and performance are often overlooked. Based on the suitable polarity and viscosity of cyclohexane, we prepared CsPbBr3@SiO2 Janus nanoparticles (JNPs) with high stability in edible oil and fast halogen-exchange (FHE) efficiency with oleylammonium iodide (OLAI). LA is selectively oxidized by lipoxidase to yield hydroxylated derivative (oxLA) capable of reacting with OLAI, thereby bridging LA content to naked-eye fluorescence color changes through the anti-FHE reaction. The established method for LA in edible oils exhibited consistent results with GC-MS analysis (p > 0.05). Since the LA content difference between edible oils, we further utilized chemometrics to accurately distinguish (100%) the species of edible oils. Overall, such elaborated CsPbBr3@SiO2 JNPs enable a refreshing strategy for edible oil discrimination.

Flexible, photoluminescent 0D Cs4PbX6 (X = Br, Br/I)-PMMA composite films for white LED via water-induced recrystallization

3D CsPbX3 inorganic perovskite materials have attracted much attention in optoelectronic devices because of their strong absorbance, high photoluminescent quantum yield, tunable band gap, and narrow emission bandwidth. However, their practical usefulness is limited due to their poor stability in ambient conditions. Here, we created photoluminescent 0D Cs4PbX6 (X = Br, Br/I) suspensions in toluene by adding a small amount of water. The photoluminescent 0D Cs4PbX6 perovskite was mixed with polymethylmethacrylate (PMMA) forming 0D Cs4PbX6/PMMA composite films with higher PL, stability, transparency, and transmittance than that of the 3D CsPbX3/PMMA composite films prepared separately. Moreover, the PL intensity maintains 90% of the initial value after 30 days in water, showing excellent water stability. The flexible white-light LED device prepared by the composite films illustrated good luminescence performance with color rendering index 74.77, chromaticity coordinates (0.32, 0.33), and color temperature 6997 K.

Graphical abstract

APTES and CTAB Synergistic Induce a Heterozygous CsPbBr3/Cs4PbBr6 Perovskite Composite and its Application on the Sensitive Fluorescent Detection of Iodide ions

Recently, all-inorganic halide perovskite quantum dots (IPQD) as a new fluorescent material with excellent fluorescence properties have attracted wide attention. However, their instability in polar solvents is the main factor hindering their application in analysis. Herein, a heterozygous perovskite (CsPbBr3/Cs4PbBr6) was simultaneously prepared and stabilized by a silylanization strategy using (3-aminopropyl)-triethoxysilane (APTES) and cetyltrimethyl ammonium bromide (CTAB) assisted precipitation encapsulation method. The synthesized CsPbBr3/Cs4PbBr6 emitted an independent fluorescence at 520 nm. The obtained CsPbBr3/Cs4PbBr6 exhibited good stability in ethanol/water mixtures. It was used as a fluorescent probe for sensitively detecting iodide ions (I-) by fluorescence quenching mechanism in the concentration range of 1 ~ 70.0 µM with the detection limit (LOD) of 0.83 µM (relative standard deviation (RSD) = 1.33%, n = 20). The simplicity and high selectivity of the proposed fluorescent analysis method were the prominent features. This work could be extended to the other target ion detection by a perovskite fluorescent quenching.

Improving the stability of perovskite nanocrystals via SiO2 coating and their applications

Lead halide perovskite nanocrystals (LHP NCs) with outstanding optical properties have been regarded as promising alternatives to traditional phosphors for lighting and next-generation display technology. However, the practical applications of LHP NCs are seriously hindered by their poor stability upon exposure to moisture, oxygen, light, and heat. Hence, various strategies have been proposed to solve this issue. In this review, we have focused our attention on improving the stability of LHP NCs via SiO2 coating because it has the advantages of simple operation, less toxicity, and easy repetition. SiO2 coating is classified into four types: (a) in situ hydrolytic coating, (b) mesoporous silica loading, (c) mediated anchoring, and (d) double coating. The potential applications of SiO2-coated LHP NCs in the field of optoelectronics, biology, and catalysis are presented to elucidate the reliability and availability of SiO2 coating. Finally, the future development and challenges in the preparation of SiO2-coated LHP NCs are analyzed in order to promote the commercialization process of LHP NC-related commodities.

Water-assisted synthesis of stable and multicolored CsPbX3@SiO2 core-shell nanoparticles as fluorescent probes for biosensing

Colloidal lead halide perovskite nanocrystals are highly luminescent materials with great promise as fluorescent probes in biosensing as long as their intrinsic instability in aqueous media is effectively addressed. In this study, we successfully prepared stable and multicolored CsPbX3@SiO2 (X = Cl/Br, Br and I) core-shell nanoparticles through a simple method based on the water-induced transformation of Cs4PbX6 into CsPbX3, combined with sol-gel procedures. We observed that the concentration of the Cs4PbX6 precursor plays a crucial role in the formation of isolated nanospheres with uniform silica coating and in controlling the number of core-free particles. Furthermore, our research expands this approach to other halide compositions, resulting in multicolored core-shell nanoparticles with emission wavelengths ranging from 490 to 700 nm, average sizes below 30 nm, and photoluminescence quantum yields close to 60%. Unlike in previous reports, the silica coating boosts the photoluminescence quantum yields compared to uncoated counterparts and provides increased structural stability for more than four days. Moreover, a controlled thermal treatment confers water stability to the as-synthesized nanoparticles. To establish the feasibility of the developed materials as fluorescent probes, we successfully demonstrated their specific recognition of a humanized antibody (omalizumab) used in treating patients with severe allergic asthma. This work paves the way to develop in vitro tests using CsPbX3@SiO2 core-shell nanoparticles as fluorogenic probes.

Impacts of Exciton Binding Energy and Dielectric Confinement of Layered Lead Halide Perovskites on Carrier Relaxation and Exciton Phonon Interactions

This work highlights the significance of dielectric confinements and exciton binding energy of hybrid layered perovskites (LPs) in controlling the carrier relaxation dynamics of LPs for designing efficient optoelectronic devices. The polarizability of organic spacer cations in LPs modulates the carrier-phonon and carrier-carrier interactions, which eventually control the carrier relaxation dynamics. Here, we have varied the alkyl-ammonium chain length in the LPs to change the dielectric confinement, and the first-principles calculations reveal that the long-chain organic spacer experiences stronger dielectric confinement in comparison to short-chain organic spacer cation-based LPs. Transient absorption spectroscopic analysis suggests that the larger dielectric confinement and higher exciton binding energy exhibit faster carrier relaxation dynamics. The enhanced exciton-phonon interaction leads to faster carrier relaxation dynamics. The much softer phonon modes are responsible for the higher up-conversion of acoustic modes to optical modes, which leads to slower carrier relaxation dynamics in n-butylamine (BA) based LPs.

CsPbX3 (X = Cl, Br, and I) Nanocrystals in Substrates toward Stable Photoluminescence: Nanoarchitectonics, Properties, and Applications

Cesium lead halide (CsPbX3, X = Cl, Br, and I) perovskite nanocrystals (NCs) possess great potential in light-emitting diode applications because of their high brightness, low cost, tunable luminescence, and facile synthesis nature. However, these NCs are often disadvantaged by their instability in nonsolvent environment that hinders the practical applications of the material. In order to solve these issues, cesium lead halide NCs prepared using a solvent environment can be placed on substrates to retain the high stability and expand the applicability of the material. This Review focuses on the transfer of the all-inorganic cesium lead halide NCs (synthesized in solutions) onto matrix materials and their direct synthesis on these bases, including the inert shell growth (inorganic and organic shell), embedment in matrixes (e.g., metal organic frameworks, porous SiO2, glass, ZrO2, Al2O3, and AlOOH), and direct synthesis in substrates. In particular, the strategies for stability and PL property improvement of the materials are also summarized. The purpose of this Review is to provide inspiration for the encapsulation of cesium lead halide NCs with high brightness and stability in matrixes to expand the applicability of these materials in wide color gamut backlighting (e.g., white-light-emitting devices).

Highly efficient silica coated perovskite nanocrystals with the assistance of ionic liquids for warm white LEDs

Given the inherent characteristics of defect-tolerant, tunable emission performance, and high extinction coefficient, lead halide perovskite nanocrystals (NCs) have attracted widespread attention as a promising material in optoelectronic fields. However, their poor structural stability greatly impedes their practical applications. Herein, a novel strategy for synthesizing stable CsPbBr₃@SiO₂ NCs via the hydrolytic polycondensation of (3-aminopropyl)triethoxysilane (APTES) in the presence of ionic liquids (ILs) is deliberately designed. The problems of fluorescence quenching and undesirable agglomeration of NCs resulting from ligand loss and surface erosion existing in common encapsulation methods can be effectively resolved. The fast and controllable growth of the SiO₂ shell around the CsPbBr₃ NCs is realized owing to the high polarity and hygroscopicity of the IL. Moreover, the dual effects of the IL for passivating the surface defects and avoiding the structural degradation of NCs during the hydrolysis process of APTES are demonstrated. As a result, CsPbBr₃@SiO₂ NCs with a high photoluminescence quantum yield of 85.7% and excellent stability are realized. Furthermore, this method proves to be a versatile tool to obtain CsPbX₃@SiO₂ NCs with different halide compositions, realizing a broad tunable wavelength from 421.2 nm to 651.6 nm. A warm white LED with a high color rending index was assembled through packaging CsPbBr₃@SiO₂ NCs and Cu-In-Zn-S/ZnS/PVP composites on a commercial blue chip. These findings are expected to facilitate the development of perovskite NCs, which provides access to their optoelectronic applications.

Superior hydrophobic silica-coated quantum dot for stable optical performance in humid environments

Quantum dot (QD) features many exceptional optical performances but is also vulnerable to moisture which results in structural damage and luminescent decrease. This work provided and fabricated a novel superior hydrophobic methylated core/shell silica-coated QD (MSQ) for high water stability. QD was coated with a silica shell and then surface-methylated by trimethyl silane. Mercaptopropyl trimethoxy silane, tetraethyl orthosilicate, and ethoxy trimethyl silane were utilized as the ligand exchanger, the raw material of silica, and the surface modification, respectively. Characterization results illustrated the core/shell structure of MSQ. In addition, its water contact angle was up to 159.6°. QD-, silica-coated QD(SQ)-, and MSQ-silicone were made and displayed similar absorption, emission, and excitation spectra but different water stabilities. The photoluminescence intensity and photoluminescence quantum yield of MSQ-silicone hardly changed during 15 d of water immersion, in contrast to the dramatical decrease of other two kinds of composite silicone. Specifically, the photoluminescence quantum yield decreases of MSQ-, SQ-, and QD-silicone were 1%, 40%, and 43%, respectively. Therefore, MSQ had a much better water stability. The superior hydrophobic methylated silica-coated QD has a great potential to realize the long-term working stability in a humid environment and the wider application in diverse fields.