Engaging vinylene carbonate in ruthenium-catalyzed regioselective C-4 methylenation and C-8 formylmethylation of isoquinolinones

Herein, we disclose the first reports on the utilization of vinylene carbonate as a C1 methylene source in ruthenium-catalyzed additive controlled regioselective C4-methylenation and weak chelation-assisted C8-formylmethylation of isoquinolinones. Adopting vinylene carbonate as both a C2 and C1 synthon is an important highlight of this work. Amide carbonyl acts as the traceless directing group in C8-formylmethylation. Remarkably, in this reaction, two C-C bonds form in one-pot producing dimeric isoquinolinones by employing vinylene carbonate as a methylene surrogate in the presence of copper acetate as an additive. Importantly, unsymmetrical dimers were achievable, albeit in low yield. Extensive control experiments are conducted to decipher the reaction mechanism. It is evident from the mechanistic studies, that the formation of a formylmethyl group in situ at the C4-carbon undergoes dimerization, oxidation and subsequent decarboxylation to produce methylene-bridged isoquinolinone dimers. This protocol is scalable and compatible with a repertoire of substrates and shows high functional group tolerance. Harnessing vinylene carbonate as both a C2 and C1 synthon is an important highlight of this work.

Pd(II)-catalyzed cascade annulation of N-substituted anilines with CO, NH4OAc and aldehydes to N1-substituted 2,3-dihydroquinazolin-4(1H)-ones

A facile and direct approach to N1-substituted 2,3-dihydroquinazolin-4(1H)-ones has been developed via Pd(II)-catalyzed one-pot cascade annulation of N-substituted anilines with CO, NH4OAc and aldehydes, and it features an intrinsic directing strategy, cheap and easily obtainable raw materials, low cost, high step economy and efficiency, broad substrate scope and good product diversity. This protocol has been successfully applied to the synthesis of glycozolone A and gram-level experiments. Based on the control experiments and the literature, the reaction mechanism was proposed.

Expanding the Scope of Alkynes in C-H Activation: Weak Chelation-Assisted Cobalt-Catalyzed Synthesis of Indole C(4)-Acrylophenone via C-O Bond Cleavage of Propargylic Ethers

Herein, we report the facile synthesis of indole C(4)-acrylophenone using a C-H bond activation strategy. For this conversion, an unsymmetrical alkyne (phenylethynyl ether) in the presence of cobalt(III)-catalyst works efficiently. In this process, alkyne gets oxidized in the presence of in situ generated water, which is the key step for this method, for which trifluoroethanol is the water source. The pivaloyl directing group chelates effectively to generate the cobaltacycle intermediate, which was detected through high-resolution mass spectrometry (HRMS). Also, the formation of bis(2,2,2-trifluoroethyl) ether has been confirmed and quantified using 19F NMR. In addition, the applicability of obtained indole C(4)-acrylophenone product has been demonstrated by performing the Nazarov cyclization and conjugate addition to the α,β-unsaturated ketone moiety.

Recent advances in metal directed C-H amidation/amination using sulfonyl azides and phosphoryl azides

Transition metal-catalyzed C-N bond formation reactions have gained popularity as a method for selectively transforming common C-H bonds into N-functionalized molecules. This approach is particularly useful for synthesizing aminated molecules, which require aminating reagents and amidated building blocks. Over the past two decades, significant advancements have been achieved in transition-metal-catalyzed C-H functionalization, with organic azides emerging as promising amino sources and internal oxidants. This review focuses on recent developments in utilizing sulfonyl and phosphoryl azides as building blocks for directed intra- and intermolecular C-H functionalization reactions. Specifically, it discusses methods for synthesizing sulfonamidates and phosphoramidates using sulfonyl and phosphoryl azides, respectively. The article highlights the potential of C-H functionalization reactions with organic azides for efficiently and sustainably synthesizing N-functionalized molecules, providing valuable insights into the latest advancements in this field.

The crucial role of silver(I)-salts as additives in C-H activation reactions: overall analysis of their versatility and applicability

Transition-metal catalyzed C-H activation reactions have been proven to be useful methodologies for the assembly of synthetically meaningful molecules. This approach bears intrinsic peculiarities that are important to be studied and comprehended in order to achieve its best performance. One example is the use of additives for the in situ generation of catalytically active species. This strategy varies according to the type of additive and the nature of the pre-catalyst that is being used. Thus, silver(I)-salts have proven to play an important role, due to the resulting high reactivity derived from the pre-catalysts of the main transition metals used so far. While being powerful and versatile, the use of silver-based additives can raise concerns, since superstoichiometric amounts of silver(I)-salts are typically required. Therefore, it is crucial to first understand the role of silver(I) salts as additives, in order to wisely overcome this barrier and shift towards silver-free systems.

Ortho C-H Functionalizations of 2-Aryl-2H-Indazoles

C-H Functionalization is ubiquitously considered as a powerful, efficient and handy tool for installing various functional groups in complex organic heterocycles in an easier and step-economic way. Similarly, indazole is endowed as a potent heterocycle and is eminent for its profound impact in biological, medicinal and industrial chemistry. In this scenario, C-H functionalization at the selective ortho position of 2-arylindazole in assistance of a metal catalyst is also becoming an appealing approach in synthetic organic chemistry. This review addressed the recent findings and developments on ortho C-H functionalization of 2-aryl-2H-indazazoles with literature coverage extending from 2018 to May 2022.

Cobalt-Catalyzed Regioselective para-Amination of Azobenzenes via Nucleophilic Aromatic Substitution of Hydrogen

The metal-catalyzed nucleophilic aromatic substitution of hydrogen (S_NArH) via coordination of the substituent on the aromatic ring to the metal catalyst, in terms of reactivity, substrate type, and reaction selectivity, complements the transition metal-catalyzed C-H functionalization that proceeds via C-H metalation but remains an elusive target. Described herein is the development of an unprecedented cobalt-catalyzed para-selective amination of azobenzenes, which is essentially a metal-promoted S_NArH process as revealed by Hammett analysis, thus illustrating the concept that coordination of the substituent on the arene ring to the metal catalyst may result in electrophilic activation of the arene ring toward S_NArH. This cobalt-catalyzed protocol allows the use of a variety of both aliphatic amines and anilines as aminating reagents, tolerates electronically diverse substituents of azobenzene, and furnishes the corresponding products in good yields with a regiospecific selectivity for para-amination.

Microwave-assisted palladium catalysed C-H acylation with aldehydes: synthesis and diversification of 3-acylthiophenes

The use of MW allows the efficient palladium(II)-catalysed C-3 acylation of thiophenes with aldehydes via C(sp²)-H activation for the synthesis of (cyclo)alkyl/aryl thienyl ketones (43 examples). Compared to standard thermal conditions, the use of MW reduces the reaction time (15 to 30 min vs. 1 to 3 hours), leading to improved yields of the ketones (up to 92%). The control of positional selectivity is achieved by 2-pyridinyl and 2-pyrimidyl ortho-directing groups at C-2 of the thiophene scaffold. To show the synthetic applicability, selected ketones were subjected to further transformations, including intramolecular reactions to directly embed the directing group in the core structure of the new molecule.

Rhodium-catalyzed cascade C–H activation/annulation/1,6-acyl migration: direct construction of free N–H indoles under mild conditions

Rh-Catalyzed regioselective cascade C–H activation/annulation/1,6-acyl migration of N-acetanilides with alkynes via C–C/C–N/C–O bond formation is developed.

Cobalt-catalysed acyl silane directed ortho C–H functionalisation of benzoyl silanes

Acyl silanes can be engaged as weakly coordinating directing groups in cobalt catalysed C–H functionalisation reactions to prepare benzoyl silanes that are highly amenable to subsequent synthetic manipulations yet inaccessible via existing methods.

Directing group switch in copper-catalyzed electrophilic C–H amination/migratory annulation cascade: divergent access to benzimidazolone/benzimidazole

We present here a copper-catalyzed electrophilic ortho C–H amination of protected naphthylamines with N-(benzoyloxy)amines, cyclization with the pendant amide, and carbon to nitrogen 1,2-directing group migration cascade to access N,N-disubstituted 2-benzimidazolinones. Remarkably, this highly atom-economic tandem reaction proceeds through a C–H and C–C bond cleavage and three new C–N bond formations in a single operation. Intriguingly, the reaction cascade was altered by the subtle tuning of the directing group from picolinamide to thiopicolinamide furnishing 2-heteroaryl-imidazoles via the extrusion of hydrogen sulfide. This strategy provided a series of benzimidazolones and benzimidazoles in moderate to high yields with low catalyst loading (66 substrates with yields up to 99%). From the control experiments, it was observed that after the C–H amination an incipient tetrahedral oxyanion or thiolate intermediate is formed via an intramolecular attack of the primary amine to the amide/thioamide carbonyl. It undergoes either a 1,2-pyridyl shift with the retention of the carbonyl moiety or H₂S elimination for scaffold diversification. Remarkably, inspite of a positive influence of copper in the reaction outcome, from our preliminary investigations, the benzimidazolone product was obtained in good to moderate yields in two steps under metal-free conditions. The N-pyridyl moiety of the benzimidazolone was removed for further manipulation of the free NH group.

A novel directing group switch strategy is explored in a copper-catalyzed divergent synthesis of benzimidazolone via electrophilic C–H amination/cyclization/1,2-C → N directing group migration cascade and benzimidazole through the extrusion of H₂S.

Transamidation and Decarbonylation of N-Phthaloyl-Amino Acid Amides Enabled by Palladium-Catalyzed Selective C-N Bond Cleavage

Amides are important functional synthons that have been widely used in the construction of peptides, natural products, and drugs. The C-N bond cleavage provides the direct method for amide conversion. However, amides, especially secondary amides, tend to be chemically inert due to the resonance of the amide bond. Here, we describe an efficient Pd-catalyzed transamidation and decarbonylation of multiamide structure molecules through C-N bond cleavage with excellent chemoselectivity. The transamidation of secondary amides and the decarbonylation of phthalimide provide meaningful tools for the modification of amino acid derivatives. Moreover, further transformations of azidation and C(sp³)-H monoarylation emphasized the potential utility of this selective C-N bond cleavage method.

Transition-Metal-Catalyzed, Coordination-Assisted Functionalization of Nonactivated C(sp3)-H Bonds

Transition-metal-catalyzed, coordination-assisted C(sp³)-H functionalization has revolutionized synthetic planning over the past few decades as the use of these directing groups has allowed for increased access to many strategic positions in organic molecules. Nonetheless, several challenges remain preeminent, such as the requirement for high temperatures, the difficulty in removing or converting directing groups, and, although many metals provide some reactivity, the difficulty in employing metals outside of palladium. This review aims to give a comprehensive overview of coordination-assisted, transition-metal-catalyzed, direct functionalization of nonactivated C(sp³)-H bonds by covering the literature since 2004 in order to demonstrate the current state-of-the-art methods as well as the current limitations. For clarity, this review has been divided into nine sections by the transition metal catalyst with subdivisions by the type of bond formation. Synthetic applications and reaction mechanism are discussed where appropriate.

C-H bond functionalization by high-valent cobalt catalysis: current progress, challenges and future perspectives

Over the last decade, high-valent cobalt catalysis has earned a place in the spotlight as a valuable tool for C-H activation and functionalization. Since the discovery of its unique reactivity, more and more attention has been directed towards the utilization of cobalt as an alternative to noble metal catalysts. In particular, Cp*Co(III) complexes, as well as simple Co(II) and Co(III) salts in combination with bidentate chelation assistance, have been extensively used for the development of novel transformations. In this review, we have demonstrated the existing trends in the C-H functionalization methodology using high-valent cobalt catalysis and highlighted the main challenges to overcome, as well as perspective directions, which need to be further developed in the future.

C-H activation reactions of nitroarenes: current status and outlook

Ring substitution reactions of nitroarenes remain an under-developed area of organic synthesis, confined to the narrow domains of S_NAr and S_NArH reactions. While searching for alternative methodologies, we took stock of the C-H activation reactions of nitroarenes which unearthed a variety of examples of nitro directed regioselective C-H functionalization reactions such as ortho-arylation, -benzylation/alkylation, and -allylation, oxidative Heck and C-H arylation reactions on (hetero)aromatic rings. A collective account of these reactions is presented in this review to showcase the existing landscape of C-H activation reactions of nitroarenes, to create interest in this field for further development and propagate this strategy as a superior alternative for ring substitution reactions of nitroarenes. The prospect of merging the C-H activation of nitroarenes with C-NO₂ activation, thereby harnessing NO₂ as a transformable multitasking directing group, is also illustrated.

8-Aminoimidazo[1,2-a]pyridine (AIP) directed Pd(ii) catalysis: site-selective ortho-C(sp2)–H arylation in aqueous medium

An efficient and facile Pd(ii) catalyzed selective ortho and β-C(sp²)–H arylation reaction employing the 8-AIP (aminoimidazo[1,2-a]pyridine) auxiliary as a removable N,N-bidentate directing group in a green solvent (water) has been reported.

Palladium-catalyzed directed synthesis of ortho-deuterated phenylacetic acid and analogues

The synthesis of deuterium-labeled organic compounds is of increased interest, especially after the approval of deutetrabenazine by the Food and Drug Administration in 2014. The selective incorporation of deuterium in the place of hydrogen not only represents uniqueness in terms of a novel chemical class, but it also can improve the pharmacokinetic profiles of drug molecules while retaining potency and other parameters; thus, hydrogen-deuterium (H/D) exchange methods have been proven to be powerful additions in different areas of chemical science. In that regard, metal-catalyzed deuterium labeling via C-H activation mediated by a unique inbuilt directing group (DG) can play a significant role in the synthesis of novel deuterated chemical entities. In this context, herein, we divulge our results relating to Pd(ii)-catalyzed deuterium incorporation (>97%) at the γ C(sp2)-position of pyridone-containing phenylacetic acid derivatives, where 3-amino-1-methyl-1H-pyridin-2-one (AMP) not only acts as an efficient N,O-directing group, but it also constitutes a part of the target molecules of medicinal importance. Our methodology, which has been optimized based on the effects of temperature, catalyst, time, and substrate scope, shows advantages over existing protocols, with non-selectivity or meager deuteration or the use of an expensive metal (catalytic or super stoichiometric) and a deuterated solvent, reported previously for the deuteration of phenylacetic acid and its derivatives. Moreover, towards our aim of synthesizing deuterium-labeled biologically relevant compounds, the gram scale synthesis of a deuterated analogue of biphenyl acetic acid (3), known to have activity against epileptic seizures, has also been successfully accomplished in high yields and with excellent isotope enrichment via implementing this protocol.

Pd(ii)-Catalyzed asymmetric intramolecular arylation of unbiased methylene C(sp3)–H bonds using readily accessible 3,3′-F2-BINOL as a chiral ligand

Pd(ii)-Catalyzed asymmetric intramolecular methylene C(sp³)–H arylation using readily accessible 3,3′-F₂-BINOL as a ligand is reported.

Directing group strategies in catalytic sp2 C–H cyanations: scope, mechanism and limitations

Directing group strategy in transition metal catalyzed sp² C–H bond cyanation has contributed to the direct conversion of hydrocarbons to cyano-containing compounds. Recent developments in transition metal-mediated sp² C–H bond cyanation using this strategy are reviewed.

Dual C–H activation: Rh(iii)-catalyzed cascade π-extended annulation of 2-arylindole with benzoquinone

A rhodium-catalyzed, N–H free indole directed cyclization reaction of benzoquinone via a dual C–H activation strategy is disclosed. This protocol has a good functional group tolerance and affords useful indole-fused heterocylces. Besides, it is insensitive to moisture, commercially available solvent can be directly used and work quite well for this transformation.

A Rh-catalyzed cascade annulation of N–H free 2-arylindole with benzoquinone via dual C–H activation strategy was reported.