Harnessing Macromolecular Chemistry to Design Hydrogel Micro- and Macro-Environments

Cell encapsulation within three-dimensional hydrogels is a promising approach to mimic tissues. However, true biomimicry of the intricate microenvironment, biophysical and biochemical gradients, and the macroscale hierarchical spatial organizations of native tissues is an unmet challenge within tissue engineering. This review provides an overview of the macromolecular chemistries that have been applied toward the design of cell-friendly hydrogels, as well as their application toward controlling biophysical and biochemical bulk and gradient properties of the microenvironment. Furthermore, biofabrication technologies provide the opportunity to simultaneously replicate macroscale features of native tissues. Biofabrication strategies are reviewed in detail with a particular focus on the compatibility of these strategies with the current macromolecular toolkit described for hydrogel design and the challenges associated with their clinical translation. This review identifies that the convergence of the ever-expanding macromolecular toolkit and technological advancements within the field of biofabrication, along with an improved biological understanding, represents a promising strategy toward the successful tissue regeneration.

Synthesis of V-shaped Thiophene Based Rotor-Stilbene: Substituent Dependent Aggregation and Photophysical Properties

Thiophene core V-shaped rotor-stilbene derivatives have been synthesized utilizing two-fold Heck coupling reaction. These compounds are blue emitters with moderate quantum yield in dilute solution. Rotor nature of the synthesized stilbenes supports aggregation induced emission (AIE) behaviour and they show substituent dependent emission behavior in aggregate state. In presence of donating groups (e.g., tert-butyl, methoxy, diphenylamine group) in stilbenes, they exhibit AIE property. But with the introduction of electron withdrawing group (nitro group), they shows aggregation caused quenching (ACQ) behavior. Different types of nano-aggregates formation is observed in aggregated state, which was confirmed by dynamic light scattering (DLS) and scanning electron microscopy (SEM) studies. The details photophysical (absorption, fluorescence, and lifetime), electrochemical property (cyclic voltammetry) and thermal stability have been investigated. Optimized structure, energy and electronic distribution of molecular orbitals have been studied by theoretical calculation.

3D-printed dosage forms for oral administration: a review

Oral administration is the most commonly used form of treatment due to its advantages, including high patient compliance, convenient administration, and minimal preparation required. However, the traditional preparation process of oral solid preparation has many defects. Although continuous manufacturing line that combined all the unit operations has been developed and preliminarily applied in the pharmaceutical industry, most of the currently used manufacturing processes are still complicated and discontinuous. As a result, these complex production steps will lead to low production efficiency and high quality control risk of the final product. Additionally, the large-scale production mode is inappropriate for the personalized medicines, which commonly is customized with small amount. Several attractive techniques, such as hot-melt extrusion, fluidized bed pelletizing and spray drying, could effectively shorten the process flow, but still, they have inherent limitations that are challenging to address. As a novel manufacturing technique, 3D printing could greatly reduce or eliminate these disadvantages mentioned above, and could realize a desirable continuous production for small-scale personalized manufacturing. In recent years, due to the participation of 3D printing, the development of printed drugs has progressed by leaps and bounds, especially in the design of oral drug dosage forms. This review attempts to summarize the new development of 3D printing technology in oral preparation and also discusses their advantages and disadvantages as well as potential applications.

Fast Visible-Light 3D Printing of Conductive PEDOT:PSS Hydrogels

Functional inks for light-based 3D printing are actively being searched for being able to exploit all the potentialities of additive manufacturing. Herein, a fast visible-light photopolymerization process is showed of conductive PEDOT:PSS hydrogels. For this purpose, a new Type II photoinitiator system (PIS) based on riboflavin (Rf), triethanolamine (TEA), and poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) is investigated for the visible light photopolymerization of acrylic monomers. PEDOT:PSS has a dual role by accelerating the photoinitiation process and providing conductivity to the obtained hydrogels. Using this PIS, full monomer conversion is achieved in less than 2 min using visible light. First, the PIS mechanism is studied, proposing that electron transfer between the triplet excited state of the dye (3 Rf*) and the amine (TEA) is catalyzed by PEDOT:PSS. Second, a series of poly(2-hydroxyethyl acrylate)/PEDOT:PSS hydrogels with different compositions are obtained by photopolymerization. The presence of PEDOT:PSS negatively influences the swelling properties of hydrogels, but significantly increases its mechanical modulus and electrical properties. The new PIS is also tested for 3D printing in a commercially available Digital Light Processing (DLP) 3D printer (405 nm wavelength), obtaining high resolution and 500 µm hole size conductive scaffolds.

High-performance photoinitiating systems for new generation dental fillings

OBJECTIVES

To obtain new generation dental composites with improved performance properties compared to currently available dental fillings on the market and to determine the influence of new initiating systems on final product parameters such as degree of cure, hardness, color, and shrinkage.

METHODS

In order to verify the effectiveness of the developed initiating systems, typical spectroscopic, electrochemical, and kinetic studies using the real-time FT-IR method were shown. Moreover, paste dental fillings were prepared, the compositions were irradiated with the dental lamp, and the degrees of cross-linking were measured by Raman spectroscopy. The polymerization shrinkage was also determined using the rheometer. In addition, their hardness was examined on the Shore scale. Finally, the color analysis of the composites in the L*a*b* color space was compared with the VITA CLASSIC colorant.

RESULTS

It was shown that, due to their excellent spectroscopic and electrochemical properties, new quinazolin-2-one can act as co-initiators in cationic and radical photopolymerization. It was demonstrated that the most effective composite containing the initiator system in the form of 3-SCH3Ph-Q, IOD, MDEA, and an inorganic filler as nanometric silica and a bonding agent is cured more than 90% after just 1 cycle of dental lamp exposure (30 s), the hardness of the composite after curing on the Shor Scale is 82 ± 4, and the polymerization shrinkage is less than 2.8%.

SIGNIFICANCE

The article demonstrates effective new initiator systems as an alternative to CQ/amine for obtaining new-generation dental composites. The developed dental composites are a big competition to the currently used dental fillings on the market.

Review of quantitative and qualitative methods for monitoring photopolymerization reactions

Authomatic in-situ monitoring and characterization of photopolymerization.

Free-Radical Photopolymerization for Curing Products for Refinish Coatings Market

Even though there are many photocurable compositions that are cured by cationic photopolymerization mechanisms, UV curing generally consists of the formation of cross-linking covalent bonds between a resin and monomers via a photoinitiated free radical polymerization reaction, obtaining a three-dimensional polymer network. One of its many applications is in the refinish coatings market, where putties, primers and clear coats can be cured faster and more efficiently than with traditional curing. All these products contain the same essential components, which are resin, monomers and photoinitiators, the latter being the source of free radicals. They may also include additives used to achieve a certain consistency, but always taking into account the avoidance of damage to the UV curing—for example, by removing light from the innermost layers. Surface curing also has its challenges since it can be easily inhibited by oxygen, although this can be solved by adding scavengers such as amines or thiols, able to react with the otherwise inactive peroxy radicals and continue the propagation of the polymerization reaction. In this review article, we cover a broad analysis from the organic point of view to the industrial applications of this line of research, with a wide current and future range of uses.

Mini-laser based submicron aerosol generator for the simple and stable simulation of combustion particulate matter

Air pollution causes millions of deaths every year. The aerosols, especially airborne nanoparticles generated by combustion, have detrimental effect on health. To protect public health against harmful aerosols, efforts to develop effective air cleaning technology have continued over the past several decades. However, the aerosol generation method used in air cleaning performance tests still rely largely on the traditional methods such as burning cigarettes, paper, and incense. Since the traditional method is inaccurate and unsteady, a more precisely controlled aerosol generation method should be developed. Here, we present a simple and inexpensive aerosol generation method that can easily and consistently produce submicron aerosols through laser ablation. This device constitutes an integrated system with a high-quality mini laser for rapid aerosol generation and a two-axis moving stage for continuous aerosol generation. We demonstrate that the concentration of generated aerosols could be easily controlled by selecting the laser irradiation time and power, resulting in the generation of ~10⁴ particles/cm³ within a few seconds. In addition, the shape and size of generated aerosols can be controlled by changing the target material. This submicron aerosol generation process can be stably maintained for up to 1 h using small-sized (3 cm × 8 cm) affordable and accessible materials, such as wood and leather, highlighting the advantages of this inexpensive and easy-to-use combustion airborne submicron particle generation method.

meta-Terphenyls as versatile fluorescent molecular sensors for monitoring the progress of hybrid polymerization processes

meta-Terphenyl derivatives were used as versatile fluorescent sensors for online monitoring of hybrid photopolymerization that allow seeing the difference between different types of polymerization processes involved in the hybrid polymerization.

Effective Singlet Oxygen Sensitizers Based on the Phenazine Skeleton as Efficient Light Absorbers in Dye Photoinitiating Systems for Radical Polymerization of Acrylates

A series of dyes based on the phenazine skeleton were synthesized. They differed in the number of conjugated double bonds, the arrangement of aromatic rings (linear and/or angular system), as well as the number and position of nitrogen atoms in the molecule. These compounds were investigated as potential singlet oxygen sensitizers and visible light absorbers in dye photoinitiating systems for radical polymerization. The quantum yield of the singlet oxygen formation was determined by the comparative method based on the 1H NMR spectra recorded for the tested dyes in the presence of 2,3-diphenyl-p-dioxene before and after irradiation. The quantum yield of the triplet state formation was estimated based on the transient absorption spectra recorded using the nanosecond flash photolysis technique. The effectiveness of the dye photoinitiating system was characterized by the initial rate of trimethylolpropane triacrylate (TMPTA) polymerization. In the investigated photoinitiating systems, the sensitizer was an electron acceptor, whereas the co-initiator was an electron donor. The effectiveness of TMPTA photoinitiated polymerization clearly depended on the arrangement of aromatic rings and the number of nitrogen atoms in the modified phenazine structure as well as the quantum yield of the triplet state formation of the photosensitizer in the visible light region.

Reversible Deactivation Radical Polymerization: From Polymer Network Synthesis to 3D Printing

3D printing has changed the fabrication of advanced materials as it can provide customized and on-demand 3D networks. However, 3D printing of polymer materials with the capacity to be transformed after printing remains a great challenge for engineers, material, and polymer scientists. Radical polymerization has been conventionally used in photopolymerization-based 3D printing, as in the broader context of crosslinked polymer networks. Although this reaction pathway has shown great promise, it offers limited control over chain growth, chain architecture, and thus the final properties of the polymer networks. More fundamentally, radical polymerization produces dead polymer chains incapable of postpolymerization transformations. Alternatively, the application of reversible deactivation radical polymerization (RDRP) to polymer networks allows the tuning of network homogeneity and more importantly, enables the production of advanced materials containing dormant reactivatable species that can be used for subsequent processes in a postsynthetic stage. Consequently, the opportunities that (photoactivated) RDRP-based networks offer have been leveraged through the novel concepts of structurally tailored and engineered macromolecular gels, living additive manufacturing and photoexpandable/transformable-polymer networks. Herein, the advantages of RDRP-based networks over irreversibly formed conventional networks are discussed.

New horizons for carbon dots: quantum nano-photoinitiating catalysts for cationic photopolymerization and three-dimensional (3D) printing under visible light

Citric acid-based carbon dots (CDs) as nano-photoinitiating catalysts for 3D printing.

Thiol ligand capped quantum dot as an efficient and oxygen tolerance photoinitiator for aqueous phase radical polymerization and 3D printing under visible light

We report here a rapid visible-light-induced radical polymerization in aqueous media photoinitiated by only ppm level thiol ligand capped cadmium selenide quantum dots. The photoinitiation system could be readily employed for photo 3D printing.

A New Approach to Micromachining: High-Precision and Innovative Additive Manufacturing Solutions Based on Photopolymerization Technology

The following article introduces technologies that build three dimensional (3D) objects by adding layer-upon-layer of material, also called additive manufacturing technologies. Furthermore, most important features supporting the conscious choice of 3D printing methods for applications in micro and nanomanufacturing are covered. The micromanufacturing method covers photopolymerization-based methods such as stereolithography (SLA), digital light processing (DLP), the liquid crystal display-DLP coupled method, two-photon polymerization (TPP), and inkjet-based methods. Functional photocurable materials, with magnetic, conductive, or specific optical applications in the 3D printing processes are also reviewed.

Multifunctional biphenyl derivatives as photosensitisers in various types of photopolymerization processes, including IPN formation, 3D printing of photocurable multiwalled carbon nanotubes (MWCNTs) fluorescent composites

Summary of properties and applications of multifunctional of biphenyl derivatives as photosensitisers in various types of photopolymerization processes, including IPN formation, 3D printing of photocurable multiwalled carbon nanotubes (MWCNTs) fluorescent composites.

Visible light enabled para-fluoro-thiol ligation

The visible light-trigged para-fluoro-thiol ligation is demonstrated for first time by using the photogeneration of a superbase DBU.