Bioinspired zwitterionic triblock copolymers designed for colloidal drug delivery: 2 - Biological evaluation

In this work, poly(lactide) nanoparticles were equipped with a bioinspired coating layer based on poly[2-(methacryloyloxy)ethyl phosphorylcholine] and then evaluated when administered to the lungs and after intravenous injection. Compared to the plain counterparts, the chosen zwitterionic polymer shell prevented the coated colloidal formulation from aggregation and conditioned it for lower cytotoxicity, protein adsorption, complement activation and phagocytic cell uptake. Consequently, no interference with the biophysical function of the lung surfactant system could be detected accompanied by negligible protein and cell influx into the bronchoalveolar space after intratracheal administration. When injected into the central compartment, the coated formulation showed a prolonged circulation half-life and a delayed biodistribution to the liver. Taken together, colloidal drug delivery vehicles would clearly benefit from the investigated poly[2-(methacryloyloxy)ethyl phosphorylcholine]-based polymer coatings.

Antifouling Surfaces Based on Polyzwitterion Loop Brushes

Antifouling surfaces have attracted increasing interest in recent years due to their potential application in various fields. In this work, we report a loop polyzwitterionic coating that exhibits excellent resistance to protein adsorption. Triblock and diblock copolymers of 2-[(2-hydroxyethyl)disulfanyl]ethyl methacrylate) (HSEMA) and 2-(dimethylamino)ethyl methacrylate) (DMAEMA) were synthesized by atom-transferred radical polymerization, followed by betainization of the DMAEMA block with 1,3-propane sultone and reduction of the disulfide bond in HSEMA to yield a triblock copolymer comprising a zwitterionic poly(sulfobetaine methacrylate) (PSBMA) midblock and poly(2-sulfanylethyl methacrylate) (PSEMA) terminal blocks as well as its diblock analogue that was of the same composition as the former and half the chain length. Both copolymers adsorbed to the gold substrate via the thiol groups in the terminal PSEMA block(s), creating loop and linear PSBMA brush coatings of comparable thickness, as revealed by X-ray photoelectron spectroscopy and ellipsometry. Adsorption of bovine serum albumin and fibrinogen as model proteins from solution to these surfaces was investigated by a quartz crystal microbalance with dissipation and confocal laser scanning microscopy (CLSM), and platelet and bacterial adhesions were assessed by scanning electron microscopy and CLSM. The results demonstrate that both linear and loop polyzwitterion brushes are excellent in resisting the adsorption of the foulants, and the loop brushes are superior to the linear analogues.

Facile Synthesis of Catechol-Containing Polyacrylamide Copolymers: Synergistic Effects of Amine, Amide and Catechol Residues in Mussel-Inspired Adhesives

The straightforward synthesis of polyamide-derived statistical copolymers with catechol, amine, amide and hydroxy residues via free radical polymerization is presented. In particular, catechol, amine and amide residues are present in natural mussel foot proteins, enabling strong underwater adhesion due to synergistic effects where cationic residues displace hydration and ion layers, followed by strong short-rang hydrogen bonding between the catechol or primary amides and SiO2 surfaces. The present study is aimed at investigating whether such synergistic effects also exist for statistical copolymer systems that lack the sequence-defined positioning of functional groups in mussel foot proteins. A series of copolymers is established and the adsorption in saline solutions on SiO2 is determined by quartz crystal microbalance measurements and ellipsometry. These studies confirm a synergy between cationic amine groups with catechol units and primary amide groups via an increased adsorptivity and increased polymer layer thicknesses. Therefore, the free radical polymerization of catechol, amine and amide monomers as shown here may lead to simplified mussel-inspired adhesives that can be prepared with the readily scalable methods required for large-scale applications.

Sticktight-inspired PEGylation for low-fouling coatings

Polyethylene glycol (PEG) has been widely used for modifying surfaces to reduce non-specific interactions with biomolecules, microorganisms, and cells. Herein, we report a sticktight-inspired PEGylation strategy to fabricate low-fouling coatings. The influence of PEG molecular architectures on the PEG density and biological adhesion were studied. Notably, an increase in the number of arms resulted in improved surface PEGylation and an improved antifouling ability against the adhesion of proteins, mammalian cells and bacteria. The molecular architecture-dependent PEGylation strategy is an attractive approach for developing advanced low-fouling coatings.

Mussel-inspired polymeric coatings with the antifouling efficacy controlled by topologies

Block copolymers with different topologies (linear, loop, 3-armed and 4-armed polymers) containing poly(N-vinylpyrrrolidone) (PVP) antifouling blocks and terminal poly(dopamine-acrylamide) (PDAA) anchoring blocks were synthesized. These polymers can form a robust antifouling nanolayer on various surfaces. The morphologies of the polymer-modified surfaces are strongly dependent on the topologies of the polymers: with the increase of arm numbers, the morphology evolves from the smooth surface to the nanoscale coarse surface. As a result, the hydrophilicity of the coatings increases with the increase of degree of nanoscale roughness, and the 4-armed block copolymer forms a superhydrophilic surface with a water contact angle (WCA) as low as 8.7°. Accordingly, the linear diblock copolymer exhibits the worst antifouling efficiency, while the 4-armed polymer exhibits the best antifouling efficiency. This is the first example systematically showing that the antifouling efficacy could be adjusted simply by the topology of the coatings. Cell viability studies revealed that all of the copolymers exhibit excellent cytocompatibility. These biocompatible polymers with narrowly distributed molecular weight might find niches for antifouling applications in various areas such as anti-protein absorption, anti-bacterial and anti-marine fouling.

Nanoarchitectonics beyond perfect order - not quite perfect but quite useful

Nanoarchitectonics, like architectonics, allows the design and building of structures, but at the nanoscale. Unlike those in architectonics, and even macro-, micro-, and atomic-scale architectonics, the assembled structures at the nanoscale do not always follow the projected design. In fact, they do follow the projected design but only for self-assembly processes producing structures with perfect order. Here, we look at nanoarchitectonics allowing the building of nanostructures without a perfect arrangement of building blocks. Here, fabrication of structures from molecules, polymers, nanoparticles, and nanosheets to polymer brushes, layer-by-layer assembly structures, and hydrogels through self-assembly processes is discussed, where perfect order is not necessarily the aim to be achieved. Both planar substrate and spherical template-based assemblies are discussed, showing the challenging nature of research in this field and the usefulness of such structures for numerous applications, which are also discussed here.

Polyester-Polydopamine Copolymers for Intravitreal Drug Delivery: Role of Polydopamine Drug-Binding Properties in Extending Drug Release

This work reports on a novel polyester copolymer containing poly(dopamine), a synthetic analogue of natural melanin, evaluated in a sustained-release drug delivery system for ocular intravitreal administration of drugs. More specifically, a graft copolymer of poly(ε-caprolactone)-graft-poly(dopamine) (PCL-g-PDA) has been synthesized and was shown to further extend the drug release benefits of state-of-the-art biodegradable intravitreal implants composed of poly(lactide) and poly(lactide-co-glycolide). The innovative biomaterial combines the documented drug-binding properties of melanin naturally present in the eye, with the established ocular tolerability and biodegradation of polyester implants. The PCL-g-PDA copolymer was obtained by a two-step modification of PCL with a final PDA content of around 2-3 wt % and was fully characterized by size exclusion chromatography, NMR, and diffusion ordered NMR spectroscopy. The thermoplastic nature of PCL-g-PDA allowed its simple processing by hot-melt compression molding to prepare small implants. The properties of unmodified PCL and PCL-g-PDA implants were studied and compared in terms of thermal properties (differential scanning calorimetry), thermal stability (thermogravimetry analysis), degradability, and in vitro cytotoxicity. PCL and PCL-g-PDA implants exhibited similar degradation properties in vitro and were both stable under physiological conditions over 110 days. Likewise, both materials were non-cytotoxic toward L929 and ARPE-19 cells. The drug loading and in vitro release properties of the new materials were investigated with dexamethasone (DEX) and ciprofloxacin hydrochloride (CIP) as representative drugs featuring low and high melanin-binding affinities, respectively. In comparison to unmodified PCL, PCL-g-PDA implants showed a significant extension of drug release, most likely because of specific drug-catechol interaction with the PDA moieties of the copolymer. The present study confirms the advantages of designing PDA-containing polyesters as a class of biodegradable and biocompatible thermoplastics that can modulate and remarkably extend the drug release kinetics thanks to their unique drug-binding properties, especially, but not limited to, for ocular applications.

Multiple strategies to control the hydrophilic-hydrophobic balance of P(DMA-co-DMAEMA-co-QDMAEMA) coatings

The regulation of the hydrophilic-hydrophobic balance of polymers has an important influence not only on their aggregation behavior in aqueous solution, but also on their adhesion properties on the surface of substrates and the applications of the modified surfaces. Based on this, a random copolymer poly(dopamine methacrylamide-co-2-(dimethylamino)ethyl methacrylate) (P(DMA-co-DMAEMA)) was synthesized as a starting polymer to generate P(DMA-co-DMAEMA-co-QDMAEMA) (PDDQ) derivatives by a programmable quaternization of the DMAEMA precursor. By adjusting the pH or temperature, both the aggregation behavior in aqueous solutions and the surface adhesive behavior on the substrate surfaces of PDDQ copolymers were regulated due to the hydrophilic-hydrophobic balance. Specifically, the surface adsorption of PDDQ copolymers on surfaces was enhanced by the increased hydrophobicity of PDDQ. Stainless steel meshes (SSM) modified with the PDDQ0 copolymer without quaternization showed a superoleophobicity in acidic aqueous media, which endowed it with improved oil-water separation performance. In addition, the hydrophilic-hydrophobic balance of PDDQs and their coatings could also be tuned by changing the ratio of DMAEMA to QDMAEMA in the copolymer. From PDDQ0 to PDDQ100, by increasing the hydrophilic QDMAEMA component of PDDQ copolymers, anti-protein properties and oil/water separation efficiency of the modified surfaces were also enhanced gradually. The results provided a reference for designing P(DMA-co-DMAEMA-co-QDMAEMA) coatings in different application environments.

Mussel-inspired polyethylene glycol coating for constructing antifouling membrane for water purification

HYPOTHESIS

Polyethylene glycol (PEG) holds considerable potential in the fabrication of antifouling surfaces due to its strong hydration property. However, anchoring PEG polymer as a stable surface coating is still challenging because of its weak surface bonding property. Inspired by the mussel adhesion strategy, it is hypothesized that PEG polymer can be robustly attached onto substrates with the assistance of a "bio-glue" layer.

EXPERIMENTS

The "bio-glue" layer composited of Levodopa/polyethyleneimine (LP) is firstly deposited onto substrates, followed by covalently anchoring the poly(ethylene glycol) diglycidyl ether (PEGDE) layer via ring-opening reaction. The antifouling property of as-prepared coating was characterized using several techniques including quartz crystal microbalance (QCM) and surface forces apparatus (SFA). Furthermore, the PEGDE/LP coating was applied in membrane functionalization for oil-in-water (O/W) emulsion separation.

FINDINGS

PEGDE/LP coating shows outstanding stability and superior antifouling properties towards various potential foulants. In the O/W emulsion separation process, the PEGDE/LP-coated membrane maintains its super-hydrophilic property under harsh solution conditions and achieves high water flux (∼3000 L m^-2 h^-1 bar^-1) and 90% water flux recovery ratio for separation of O/W emulsions containing different bio-foulants. This coating strategy provides a promising approach for fabricating stable coating with outstanding antifouling properties in various environmental engineering applications.

Conformation-dominated surface antifouling and aqueous lubrication

Antifouling and aqueous lubrication are important properties for biomaterials, especially for those with implantation purposes. In order to better understand the polymer conformation dependence of the surface antifouling and lubrication properties, poly(ethylene glycol) (PEG) polymers with mono-functional and difunctional catechol anchors were designed and anchored on surface to adopt tail and loop conformations. Diblock and triblock copolymers with poly(dopamine methacrylamide) (PDMA) block as anchors and PEG block as the main body were synthesized and anchored on silicon surfaces by a "grafting to" strategy. The chemical composition, film thickness, and surface roughness of both coatings were controlled to be similar to give a direct comparison of looped brushes and tailed analogues. Then, the antifouling and surface friction behaviors were detected to verify the topological conformation effect of PEG polymer brushes. Results showed that PEG triblock copolymer modified surface exhibited an obviously better antifouling property and a lower friction coefficient of ∼0.011 than that of PEG diblock copolymer modified surface. Additionally, calculation and simulation results demonstrated that triblock copolymer had higher adsorption energy and anchored on surface with looped conformation. It is indicated that the strongly anchored PEG loops are effective for excellent antifouling and lubricating properties due to its strong hydration and steric hindrance. The conformation-dominated enhanced antifouling and reduced interfacial friction is an effective method for the development of excellent antifouling surfaces.

Lubricin-Inspired Loop Zwitterionic Peptide for Fabrication of Superior Antifouling Surfaces

Biofouling represents great challenges in many applications, and zwitterionic peptides have been a promising candidate due to their biocompatibility and excellent antifouling performance. Inspired by lubricin, we designed a loop-like zwitterionic peptide and investigated the effect of conformation (linear or loop) on the antifouling properties using a combination of surface plasma resonance (SPR), surface force apparatus (SFA), and all atomistic molecular dynamics (MD) simulation techniques. Our results demonstrate that the loop-like zwitterionic peptides perform better in resisting the adsorption of proteins and bacteria. SFA measurements show that the loop-like peptides reduce the adhesion between the modified surface and the modeling foulant lysozyme. All atomistic MD simulations reveal that the loop-like zwitterionic peptides are more rigid than the linear-like zwitterionic peptides and avoid the penetration of the terminus into the foulants, which lower the interaction between the zwitterionic peptides and foulants. Besides, the loop-like zwitterionic peptides avoid the aggregation of the chains and bind more water, improving the hydrophilicity and antifouling performance. Altogether, this study provides a more comprehensive understanding of the conformation effect of zwitterionic peptides on their antifouling properties, which may contribute to designing novel antifouling materials in various biomedical applications.

Synthesis and antifouling performance of tadpole-shaped poly(N-hydroxyethylacrylamide) coatings

Linear poly(N-hydroxyethylacrylamide) (PHEAA) is regarded as one of the most promising antifouling materials because of its excellent antifouling properties and good hemocompatibility. However, the antifouling performance of topological PHEAAs remains largely unknown. Herein, the preparation of antifouling surfaces based on a tadpole-shaped PHEAA coating is reported for the first time, and how the tadpole-shaped PHEAA architecture affects antifouling performance is investigated. It is shown that the tadpole-shaped PHEAA-modified surfaces exhibit better antifouling performance than linear copolymer precursor-modified surfaces with identical molar masses and chemical compositions. This may be primarily attributed to the presence of cyclic PHEAA head chain segments in the tadpole-shaped PHEAA copolymer, and the absence of interchain entanglements can facilitate the formation of smoother and densely packed grafts, which result in better antifouling properties.