Analogous Chain Selenite Chlorides Ba2M(SeO3)2Cl2 (M = Cu2+, Ni2+, Co2+, Mn2+) and Pb2Cu(SeO3)2Cl2 with Tunable Spin S: Syntheses and Characterizations

A series of analogous chain selenite chlorides Ba2M(SeO3)2Cl2 (M = Cu 1, Ni 2, Co 3, Mn 4) and Pb2Cu(SeO3)2Cl2 5 with tunable spin S from S = 1/2 to S = 5/2 have been hydrothermally synthesized and characterized. These analogues crystallized in the orthorhombic Pnnm space group (monoclinic P21/n space group for 5) all containing M2+-SeO3-M2+ spin chains, which are further separated by the Ba2+ ions (Pb2+ for 5). The magnetic susceptibility results of 1, 2, and 5 show broad maxima around 80.0, 18.9, and 78.0 K, respectively, indicating good one-dimensional (1D) magnetism. Meanwhile, no long-range order (LRO) is observed down to 2 K for both 1 and 5, while the isostructural compounds 2, 3, and 4 exhibit LRO at 3.4 K, 10.8 K, and 5.7 K, respectively, which are further confirmed by the heat capacity and electron spin resonance results, as well as the observed spin-flop transitions in the M-H curves measured at 2 K below TN. The magnetizations of 1-5 at 7 T are still far from saturation. In addition, thermal stability and FT-IR and UV-vis-NIR spectroscopy of 1-5 are reported.

UV-Transparent SHG Material Explored in an Alkali Metal Sulfate Selenite System

The first examples of alkali metal selenite sulfates, namely, Na8(SeO3)(SO4)3 (1), Na2(H2SeO3)(SO4) (2), and K4(H2SeO3)(HSO4)2(SO4) (3), were successfully synthesized by hydrothermal reactions. Their structures display three different zero-dimensional configurations composed of isolated sulfate tetrahedra and selenite groups separated by alkali metals. Na8(SeO3)(SO4)3 (1) features a noncentrosymmetric structure, while Na2(H2SeO3)(SO4) (2) and K4(H2SeO3)(HSO4)2(SO4) (3) are centrosymmetric. Powder second-harmonic-generation measurements revealed that Na8(SeO3)(SO4)3 (1) shows a phase-matchable SHG intensity about 1.2 times that of KDP. UV-vis-NIR diffuse reflectance spectroscopic analysis indicated that Na8(SeO3)(SO4)3 (1) has a short UV cutoff edge and a large optical band gap, which makes it a possible UV nonlinear optical material. Theoretical calculations revealed that the birefringence of Na8(SeO3)(SO4)3 (1) is 0.041 at 532 nm, which is suitable for phase-matching condition. This work provides a good experimental foundation for the exploration of new UV nonlinear crystals in an alkali metal selenite sulfate system.

AX·(H2SeO3)n (A = K, Cs; X = Cl, Br; n = 1, 2): A Series of Ionic Cocrystals as Promising UV Birefringent Materials with Large Birefringence and Wide Band Gap

The design and syntheses of new birefringent crystals will be of great importance in commercial applications and materials science. A series of ultraviolet (UV) birefringent crystals, AX·(H2SeO3)n (A = K, Cs; X = Cl, Br; n = 1, 2), with large sizes up to 23 × 6 × 3 mm3, was successfully synthesized by simple aqueous solution method. These four compounds belong to three different space groups. Isomorphic KCl·(H2SeO3)2 and CsCl·(H2SeO3)2 crystallize in the P 1 ¯ space group, while CsBr·(H2SeO3)2 and CsCl·H2SeO3 crystallize in the P21/m and P21/c space groups, respectively. They exhibit cocrystal structures composed of [2(H2SeO3)]∞ and [AX]∞ frameworks, ingeniously inheriting the large optical anisotropy of selenite and the wide band gap of alkali metal halide. And it proves that these compounds indeed possess large birefringence (0.1-0.17 at 532 nm) and short UV cutoff edges (227-239 nm), achieving a balance of optical properties. This research affords a simple and viable strategy for the design and syntheses of new UV birefringent crystals. Besides, it is also found that the n value and ionic size (A and X ions) have important influences on the crystal structures and optical properties of AX·(H2SeO3)n. And this will promote further understanding of the alkali metal halide selenite family.

Chiral amino acid-templated tin fluorides tailoring nonlinear optical properties, birefringence, and photoluminescence

In this study, we successfully synthesized two types of new chiral amino acid-templated tin fluoride crystals: (R)-[(C8H10NO3)2]Sn(IV)F6, (S)-[(C8H10NO3)2]Sn(IV)F6, (R)-[C8H10NO3]Sn(II)F3, and (S)-[C8H10NO3]Sn(II)F3, employing a slow evaporation method. The crystal structures of Sn(IV)-compounds were determined to belong to the noncentrosymmetric (NCS) nonpolar space group, P21212. Conversely, the structures of Sn(II)-compounds were found to crystallize in the NCS polar space group, P21, as revealed by single-crystal X-ray diffraction analysis. Remarkably, Sn(IV)-compounds exhibited a larger birefringence (0.328@546.1 nm), attributed to the well-stacked arrangement of planar π-conjugated benzene rings along the b-axis. The ability of tin(IV) fluorides to form more hydrogen bonds with ligands increased the probability of π-π interactions between benzene rings, enabling the growth of centimeter-sized crystals in Sn(IV)-compounds. In contrast, Sn(II)-compounds displayed a stronger second-harmonic generation (SHG) response (0.85 × KDP) than Sn(IV)-compounds (0.46 × KDP). This enhanced SHG response in Sn(II)-compounds was attributed to the increased dipole moments resulting from the presence of lone pairs. Additionally, Sn(II)-compounds exhibited photoluminescent properties due to the transition from the metal-to-ligand charge transfer state, facilitated by the presence of the lone pairs.

The First UV Nonlinear Optical Selenite Material: Fluorination Control in CaYF(SeO3 )2 and Y3 F(SeO3 )4

It is a great challenge to develop UV nonlinear optical (NLO) material due to the demanding conditions of strong second harmonic generation (SHG) intensity and wide band gap. The first ultraviolet NLO selenite material, Y₃ F(SeO₃ )₄ , has been obtained by control of the fluorine content in a centrosymmetric CaYF(SeO₃ )₂ . The two new compounds represent similar 3D structures composed of 3D yttrium open frameworks strengthened by selenite groups. CaYF(SeO₃ )₂ has a large birefringence (0.138@532 nm and 0.127@1064 nm) and a wide optical band gap (5.06 eV). The non-centrosymmetric Y₃ F(SeO₃ )₄ can exhibit strong SHG intensity (5.5×KDP@1064 nm), wide band gap (5.03 eV), short UV cut-off edge (204 nm) and high thermal stability (690 °C). So, Y₃ F(SeO₃ )₄ is a new UV NLO material with excellent comprehensive properties. Our work shows that it is an effective method to develop new UV NLO selenite material by fluorination control of the centrosymmetric compounds.

Cs[B3O3F2(OH)2]: discovery of a hydroxyfluorooxoborate guided by selective organic-inorganic transformation

Selective transformation between organic and inorganic systems is crucial but still remains a challenge. Herein, we demonstrated that selective organic-inorganic transformation is a simple but effective strategy to find new hydroxyfluorooxoborates. By replacing the [Ph₄P]/[Ph₃MeP] organic cations with Cs atoms, a new hydroxyfluorooxoborate Cs[B₃O₃F₂(OH)₂] with three-membered [B₃O₃F₂(OH)₂] clusters was synthesized. Theoretical analysis confirmed the effects of different components in the lattice of reported structure on the optical properties.

RbCl·(H2SeO3)2: A Salt-Inclusion Selenite Featuring Short UV Cut-Off Edge and Large Birefringence

Birefringent materials are key components to control the light polarization in laser science and technology as well as optical communication. However, the performance of current commercial birefringent materials has been limited by the magnitude of birefringence, optical transparency range, or the attainability of large-scale single crystals. To explore new birefringent materials, we strategically incorporated a lone pair cation (Se⁴⁺) with large optical anisotropy, an alkali metal, and halogen ions (Rb⁺ and Cl^-) with superior UV transparent capacity; thus a new compound, RbCl·(H₂SeO₃)₂, was successfully discovered with the aid of the facile hydrothermal method. Interestingly, Rb-Cl chains locate in the [H₂SeO₃]_∞ skeleton, which makes RbCl·(H₂SeO₃)₂ a salt-inclusion selenite. Millimeter-sized single crystals (up to 4 × 2 × 1 mm³) were obtained, and the transmittance spectrum revealed that its UV cut-off edge can be as low as 230 nm. In addition, the calculated birefringence of RbCl·(H₂SeO₃)₂ is 0.14 at 589 nm that is similar to the birefringent value of famous α-BaB₂O₄. Wide UV transparency, large birefringence, and feasible crystal growth make RbCl·(H₂SeO₃)₂ a new member of birefringent materials for UV light applications.

Role of fluorine on the structure and second-harmonic-generation property of inorganic selenites and tellurites

Fluorine, as the most electronegative element, can replace the oxygen ligands of functional groups under given conditions. These fluoride groups are more or less different from the pure oxide groups in composition, symmetry, polarizability, transmittancy, etc. The rational use of these differences is expected to improve the probability of noncentrosymmetric structures and the comprehensive performance of second-harmonic-generation (SHG) materials. In this feature article, we introduce the recent developments in fluoride selenite and tellurite SHG materials together with highlighting our contributions, including Se(IV) and Te(IV) compounds with (i) d⁰ transition metal oxyfluoride octahedron, (ii) IIIA metal oxyfluoride octahedron, (iii) fluoride lone pair cation polyhedron, and (iv) other fluoride polyhedron. The future perspectives of fluoride selenite and tellurite SHG materials are also discussed.

Hydrogen-Bond-Driven Synergistically Enhanced Hyperpolarizability: Chiral Coordination Polymers with Nonpolar Structures Exhibiting Unusually Strong Second-Harmonic Generation

Four chiral coordination polymers (CPs), M[(S,S)-C₁₄ H₁₄ N₂ O₆ ] and M[(R,R)-C₁₄ H₁₄ N₂ O₆ ] (M=Zn or Cd), have been exclusively synthesized in high yields with the aid of newly designed chiral ligand under hydrothermal condition. The CPs crystallizing in the orthorhombic nonpolar space group, C222₁ , reveal three-dimensional framework structures composed of MO₄ tetrahedra and the corresponding homochiral linkers. Powder second-harmonic generation (SHG) measurements indicate that the nonpolar CPs reveal very strong SHG efficiency of ca. 5-9 times that of KH₂ PO₄ and exhibit type-I phase-matching behavior. Density functional theory calculations suggest that the unusually large SHG efficiency found from the nonpolar CPs should be attributable to the synergistic effect of polarizable metal cations and enhanced hyperpolarizability in the donor-acceptor system originating from the hydrogen bonding in the coordinated linkers.

[GaF(H2O)][IO3F]: a promising NLO material obtained by anisotropic polycation substitution

A novel salt-inclusion fluoroiodate [GaF(H2O)][IO3F] derived from CsIO2F2 was ingeniously obtained through anisotropic polycation substitution. Because the catenulate [GaF(H2O)]2+ framework serves as a template for the favorable assembly of the polar [IO3F]2- groups and contributes to the nonlinear coefficient, [GaF(H2O)][IO3F] exhibits a greatly improved second-harmonic generation (SHG) effect of 10 times that of KH2PO4 (KDP) and a considerable band gap of 4.34 eV compared to the parent compound CsIO2F2 (3 × KDP, 4.5 eV). Particularly, to the best of our knowledge, [GaF(H2O)][IO3F] has the largest laser-induced damage threshold (LDT) of 140 × AgGgS2 of the reported iodates. All these results signify that [GaF(H2O)][IO3F] is a promising nonlinear optical (NLO) crystal. This work also proposes that anisotropic polycation substitution is an effective approach to optimize the SHG effect and develop excellent NLO materials.

In situ hydrothermal synthesis of polar second-order nonlinear optical selenate Na5(SeO4)(HSeO4)3(H2O)2

An alkali–metal selenate nonlinear optical (NLO) crystal, Na₅(SeO₄)(HSeO₄)₃(H₂O)₂, which possesses good second-order nonlinear optical properties, has been obtained by mild in situ hydrothermal synthesis.

First chiral fluorinated lead vanadate selenite Pb2(V2O4F)(VO2)(SeO3)3 with five asymmetric motifs and large optical properties

The first fluorinated lead vanadate selenite Pb2(V2O4F)(VO2)(SeO3)3 (PVOFS) was successfully synthesized via a mild hydrothermal method. This compound crystallizes in the chiral space group P212121 of the orthorhombic system and it is the first noncentrosymmetric structure in the PbII-VV-SeIV-O-F system. PVOFS is composed of five kinds of second-order Jahn-Teller susceptible asymmetric motifs, including three distinct types of vanadium-centered polyhedral units ([VO5F], [VO6] and [VO5]), [SeO3] pyramids and Pb2+ cations. It features a unique three-dimensional open framework structure displaying three types of tunnels (10-, 8- and 7-membered rings), which enriches the structural diversity for fluorinated vanadate selenite systems. Optical property studies revealed that PVOFS shows a second-harmonic generation response of 0.3 times that of the commercial KH2PO4 with phase matching behavior, a wide transparent region covering IR windows, an optical band gap of 2.35 eV, a high laser damage threshold of 61 times that of AgGaS2, and a large birefringence of 0.105 at 1064 nm. Theoretical calculations have been performed to clarify the correlation between the molecular structure and the optical properties of PVOFS.