Synthesis of omega-3 mediated copper (ω-3-Cu) and copper oxide (ω-3-CuO) nanocatalyst dual application of dye decolourization and aerobic oxidation of eco-friendly sustainable approach

In this study, ω-3-Cu and ω-3-CuO nanocatalysts were investigated for industrial environmental issues. Nowadays, green methodology is very important for addressing industrial environmental issues. In this regard, the current study focuses on ω-3-Cu and ω-3-CuO used for aerobic oxidation and dye decolourization via an eco-friendly approach. The synthesised ω-3-Cu and ω-3-CuO nanocatalysts were characterised using FT-IR, UV, XRD, TEM, GC-MS, 1H and 13C NMR. The results showed that the prepared ω-3-Cu catalyst was almost spherical with forms and sizes typically less than 20 nm and the ω-3-CuO nanocatalyst 10 nm. The ω-3 Cu and ω-3-CuO nanocatalysts were investigated for the conversion of pentan-2-ol into pentan-2-one, which was observed by GC-MS analysis. The ω-3-CuO nanocatalyst decolourised the Brilliant Blue dye more quickly (100% in 30 min) than ω-3-Cu (85% in 60 min) and ω-3 (no colour in 60 min), and Rhodamine B was not decolourised because our ω-3-Cu and ω-3-CuO nanocatalysts inactivated the rhodamine B dye. The aerobic oxidation process using the ω-3-CuO nanocatalyst as the end product of pentan-2-one resulted in a retention time of 30.33. To the best of our knowledge, ω-3-Cu and ω-3-CuO nanocatalysts have not been documented for their application in decolourisation and aerobic oxidation. By highlighting the potential use for the continued advancement and innovation of ω-3-CuO nanocatalysts in the long-term future, cost-effective and eco-friendly methods for producing reusable ω-3-CuO nanocatalysts have the potential to be applied in advanced technical fields, particularly in the areas of dye decolourisation and aerobic oxidation. Finally, we successfully accomplished these processes using the ω-3-CuO nanocatalyst. The ω-3-CuO nanocatalyst evaporated more quickly than the ω-3-Cu and ω-3-CuO nanocatalyst, without any additional energy. ω-3-CuO is the most effective nanocatalyst for dye decolourization and aerobic oxidation (Dual application). ω-3-CuO is used in textile and pharmaceutical industries.

Vitex Negundo-Fe3O4-CuO green nanocatalyst (VN-Fe3O4-CuO): synthesis of pyrazolo[3,4-c]pyrazole derivatives via the cyclization of isoniazid with pyrazole and their antimicrobial activity, cytotoxicity, and molecular docking studies

In this study, we developed a novel pyrazolo[3,4-c]pyrazole derivative with antibacterial and antifungal activities that shows great potential for treating infectious diseases. To evaluate the binding affinity of 1AJ0 and 1AI9 proteins for developing potent antibacterial and antifungal compounds, we used the Vitex negundo (VN) leaf extract as the capping and reducing agent and reacted it with Fe2O3 and Cu(OAc)2 solutions to synthesize the VN-Fe3O4-CuO nanocatalyst. The newly synthesized compounds were confirmed using Fourier transform infrared spectroscopy, transmission electron microscopy, UV-visible spectroscopy, and X-ray diffraction analyses. Antibacterial screening revealed that compound 1g was highly active against Escherichia coli (MIC: 1 μg mL-1) and was much more effective than the standard ciprofloxacin. Compound 1b showed a higher antifungal activity than clotrimazole against Candida albicans (MIC: 0.25 μg mL-1) and cytotoxic activity against MCF-7 cancer cell lines. Compounds 1a-1l were exhibited low cytotoxicity activity compared to the standard doxorubicin (LC50: 21.05 ± 0.82 μg mL-1). To further support the discovery of new active antibacterial agents, compounds 1g and 1b and proteins 1AJ0 and 1AI9 were examined using the AutoDock Vina program and were compared with the standards ciprofloxacin and clotrimazole. With the 1AJ0 protein, compound 1g had a higher docking score (-3.7 kcal mol-1) than ciprofloxacin (-5.6 kcal mol-1), and with the 1AI9 protein, compound 1b had a higher docking score (-4.8 kcal mol-1) than clotrimazole (-4.4 kcal mol-1). Additionally, molecular dynamics simulation was used to investigate the most probable binding mode of compounds 1b and 1g with 1AI9 and 1AJ0, respectively. The VN-Fe3O4-CuO catalyst was used to prepare pyrazolo[3,4-c]pyrazole derivatives, which were successfully characterized and screened for antimicrobial and cytotoxic activities, molecular docking, and molecular dynamics simulation studies.

Pd(II), Ni(II), and Cu(II) complexes of α,α'-ditolylmethanone dipyrroethene

Dipyrromethenes containing two pyrrole rings connected by one meso-carbon are versatile monoanionic bidentate ligands and form coordination complexes with many metals/nonmetals/metalloids. Dipyrroethenes containing one additional meso-carbon compared to dipyrromethenes have more space between coordinating pyrrole nitrogens and provide a good coordination environment but have not been explored as ligands in coordination chemistry. Dipyrroethenes are dianionic bidentate ligands and by suitable modifications, the coordination environment of dipyrroethenes can be changed further. Herein, we successfully synthesized α,α'-ditolylmethanone dipyrroethene which is a bipyrrolic tetradentate ligand with an ONNO ligand core and used it for the synthesis of novel Pd(II), Ni(II), and Cu(II) metal complexes by treating it with respective metal salts in CH₂Cl₂/CH₃OH at room temperature. The X-ray crystallographic structure of the metal complexes showed that the M(II) ion was coordinated to the ONNO atoms of the ligand in a perfect square planar geometry. The NMR studies of Pd(II) and Ni(II) complexes also supported the highly symmetric nature of the metal complexes. The absorption spectra of the metal complexes showed strong bands in the region of 300-550 nm. The electrochemical studies of metal complexes revealed that only ligand-based oxidation and reduction were observed. The DFT and TD-DFT studies were in agreement with the experimental observations. Our preliminary studies indicated that the Pd(II) complex can be used as a catalyst for the Fujiwara-Moritani olefination reaction.

Highly Active and Dispersed Pd Nanoparticles Stabilized by Lacunary Phosphomolybdate: Synthesis, Characterization, and Liquid Phase Hydrogenation of Levulinic Acid to γ-Valerolactone

In the current scenario, one of the crucial reaction conversions is the synthesis of renewable biofuels and value-added chemicals from the hydrogenation of biomass. Therefore, in the present work, we are proposing aqueous phase conversion of levulinic acid to γ-valerolactone via hydrogenation using formic acid as a sustainable green hydrogen source over a sustainable heterogeneous catalyst. The catalyst based on Pd nanoparticles stabilized by lacunary phosphomolybdate (PMo₁₁Pd) was designed for the same and characterized by EDX, FT-IR, ³¹P NMR, powder XRD, XPS, TEM, HRTEM, and HAADF-STEM analyses. A detailed optimization study was done to achieve maximum conversion (95% conversion), using a very small amount of Pd (1.879 × 10^-3 mmol) with notable TON (2585) at 200 °C in 6 h. The regenerated catalyst was found to be workable (reusable) up to three cycles without any change in activity. Also, a plausible reaction mechanism was proposed. The catalyst exhibits superior activity against reported catalysts.

Mechanically Robust Hybrid Gel Beads Loaded with "Naked" Palladium Nanoparticles as Efficient, Reusable, and Sustainable Catalysts for the Suzuki-Miyaura Reaction

The increase in demand for Pd and its low abundance pose a significant threat to its future availability, rendering research into more sustainable Pd-based technologies essential. Herein, we report Pd scavenging mechanically robust hybrid gel beads composed of agarose, a polymer gelator (PG), and an active low-molecular-weight gelator (LMWG) based on 1,3:2,4-dibenzylidenesorbitol (DBS), DBS-CONHNH ₂ . The robustness of the PG and the ability of the LMWG to reduce Pd(II) in situ to generate naked Pd(0) nanoparticles (PdNPs) combine within these gel beads to give them potential as practical catalysts for Suzuki-Miyaura cross-coupling reactions. The optimized gel beads demonstrate good reusability, green metrics, and most importantly the ability to sustain stirring, improving reaction times and energy consumption compared to previous examples. In contrast to previous reports, the leaching of palladium from these next-generation beads is almost completely eliminated. Additionally, for the first time, a detailed investigation of these Pd-loaded gel beads explains precisely how the nanoparticles are formed in situ without a stabilizing ligand. Further, detailed catalytic investigations demonstrate that catalysis occurs within the gel beads. Hence, these beads can essentially be considered as robust "nonligated" heterogeneous PdNP catalysts. Given the challenges in developing ligand-free, naked Pd nanoparticles as stable catalysts, these gel beads may have future potential for the development of easily used systems to perform chemical reactions in "kit" form.

Efficiency of zero-dimensional and two-dimensional graphene architectural nanocomposites for organic transformations in the contemporary environment: a review

Graphene derivatives-based nanocatalyst finds increasing utilisation in the catalysis field for organic transformations. Researchers have been working on the development of graphene oxide, reduced graphene oxide, and graphene quantum dots with metal or metal oxide nanocomposites over the last few years. These materials exhibit excellent electrical, catalytic, optical, thermal, and magnetic properties. In particular, GO/rGO/GQDs composites assisted by metal or metal oxides have attracted broad attention for their possible applications in organic compound synthesis, drug delivery, sensors, devices, and the related areas of the environment. In this review, we have summarised GO/rGO/GQDs-metal or metal oxide composites using catalyst for organic conversions and synthesis of organic compounds in accordance with the discussion on the key problems and prospects for future study. Furthermore, there is a significant function for the catalytic efficiency of composites assisted by metal or metal oxide nanocatalyst which is categorised by graphene derivatives bases.

Modulated electronic structure of Pd nanoparticles on Mg(OH)2 for selective benzonitrile hydrogenation into benzylamine at a low temperature

Pd nanoparticles with enriched electronic density anchored on Mg(OH)2 realize selective benzonitrile hydrogenation to benzylamine at low temperature in the absence of additives, in an atom-economical and green approach for synthesis of highly value-added primary amines.

Robust palladium catalysts on nickel foam for highly efficient hydrogenations

The combination of a polydopamine interface, solvothermal seeding of Pd(OAc)2, and ALD Al2O3 overcoat enables the formation of evenly-coated, ultralow Pd loading Ni foam monolith materials.

Encapsulation of Metal Clusters within Porous Organic Materials: From Synthesis to Catalysis Applications

Metal clusters (MCs) with dimensions between a single metal atom and nanoparticles of >2 nm usually possess distinct geometric and electronic structures, their outstanding performance in catalysis applications have underpinned a broad research interest. However, smaller-sized MCs are easily deactivated by migration coalescence during the catalysis process because of their high surface energy. Therefore, the search of an appropriate stabilizer for MCs is urgently demanded. In recent years, porous organic polymers (POPs) and organic molecular cages (OMCs), as emerging functional materials, have attracted significant attention. Benefiting from the spatial confinement, encapsulating MCs into these porous organic materials is a promising approach to guarantee the uniform size distribution and stability. In this review, we aim to provide a comprehensive summary of the recent progress in the synthetic strategies and catalysis applications of the encapsulated MCs, and seek to uncover promising ideas that can stimulate future developments at both the fundamental and applied levels.

Magnetically recoverable nickel-palladium alloy nanocatalysts for direct C-H arylation reactions

Novel magnetically recoverable nanocatalyst comprising nickel-palladium (NiPd) alloy nanoparticles (NPs) supported on reduced graphene oxide (rGO) modified with cobalt ferrite (CoFe₂O₄) NPs was fabricated for the direct C-H arylation of imidazopyridine, imidazole, indolizine and furan with aryl halides. To prepare the presented catalyst, rGO nanosheets were first modified with as-synthesized CoFe₂O₄ NPs and then the obtained CoFe₂O₄-rGO nanocomposites served as a support material for the synthesis of bimetallic NiPd alloy NPs at various compositions. The obtained CoFe₂O₄-rGO/NiPd nanocatalysts were characterized by many advanced analytical techniques including TEM, STEM-EDS, XRD, XPS, and ICP-MS. Next, to optimize the reaction conditions, CoFe₂O₄-rGO/NiPd nanocatalysts with different alloy compositions and their monometallic counterparts (CoFe₂O₄-rGO/Ni and CoFe₂O₄-rGO/Pd) were initially tested in the direct C-H arylation of imidazopyridine with bromobenzene. Among all tested nanocatalysts under the optimum reaction conditions, CoFe₂O₄-rGO/Ni₂₀Pd₈₀ showed the best catalytic activity in terms of the isolated product yields. The C-H arylation reactions were studied over a broad substrate scope (35 examples from 36 substrates) and gave the related biaryl products in good to excellent yields. Besides a broad substrate scope, the late-stage C-H arylation of zolimidine, a gastroprotective drug, was realized under the optimized reaction conditions. Moreover, the CoFe₂O₄-rGO/Ni₂₀Pd₈₀ nanocatalysts were recovered from the reaction medium using a simple magnet and reused in the C-H arylation reactions up to five consecutive runs without a significant drop in the product yield. This study shows that magnetically recoverable Pd nanoalloys are promising heterogeneous catalysts to be used in sustainable C-H functionalization reactions.

Recent Progress of Metal Nanoparticle Catalysts for C–C Bond Forming Reactions

Over the past few decades, the use of transition metal nanoparticles (NPs) in catalysis has attracted much attention and their use in C–C bond forming reactions constitutes one of their most important applications. A huge variety of metal NPs, which have showed high catalytic activity for C–C bond forming reactions, have been developed up to now. Many kinds of stabilizers, such as inorganic materials, magnetically recoverable materials, porous materials, organic–inorganic composites, carbon materials, polymers, and surfactants have been utilized to develop metal NPs catalysts. This review classified and outlined the categories of metal NPs by the type of support.

Effect of organic solvents on solvatochromic, fluorescence, and electrochemical properties of synthesized thiazolylcoumarin derivatives

In this present investigation, thiazolylcoumarin derivatives (5a-5k) were synthesized from thiosemicarbazide, ethyl acetoacetate, and naphthaldehyde through a multistep route. The formation of thiazolylcoumarin derivatives with bioactive scaffolds was confirmed through nuclear magnetic resonance spectroscopy. A solvatochromic study of synthesized thiazolylcoumarin derivatives was carried out using ultraviolet-visible methods for dimethylformamide (DMF), ethyl acetate, and ethanol solvents. The redox behaviour of as-synthesized thiazolylcoumarin derivatives (5a-5k) was examined in dimethyl sulphoxide by conducting an electrochemical study. Fluorescence properties of thiazolylcoumarin derivatives were studied in DMF, ethanol, and ethyl acetate to visualize the solvent effect on the emitting ability of thiazolylcoumarin derivatives.