1
|
Prihatiningsih MC, Pratama C, Kundari NA, Megasari K, Ariyanti D, Saputra A, Kusuma HD, Astuti P. Rifampicin adsorption and release study using Santa Barbara amorphous-16 modified Al (SBA-16-Al) for a drug delivery system. RSC Adv 2024; 14:7371-7382. [PMID: 38433940 PMCID: PMC10906368 DOI: 10.1039/d3ra08360h] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/07/2023] [Accepted: 02/18/2024] [Indexed: 03/05/2024] Open
Abstract
In this study, the surface modification of Santa Barbara Amorphous-16 (SBA-16) with aluminum (SBA-16-Al) was carried out as a rifampicin matrix for the treatment of tuberculosis. Surface modification of SBA-16 was achieved using the direct-synthesis grafting method. Then, the adsorption and release properties of rifampicin from the SBA-16-Al matrix have been studied in batches. In addition, the SBA-16-Al has been characterized using Fourier-Transform Infrared Spectroscopy (FTIR), X-ray diffraction analysis (XRD), transmission electron microscopy (TEM), and Surface Area Analysis (SAA) Brunaur, Emmett and Teller (SAA-BET). The results show that the mesoporous material, the SBA-16-Al has a specific surface area of 843.5 m2 g-1 and 624.3 m2 g-1 for SBA-16, nanometer-sized pore diameters, and an amorphous crystal lattice. The FTIR spectra showed the Al-O bond at 802 cm-1 which indicates the Al group has been successfully added into SBA-16. The adsorption isotherm of rifampicin in SBA-16-Al follows the Freundlich model which illustrates the adsorption is heterogeneous and forms a multilayer. The adsorption of rifampicin is chemisorption which occurs non-spontaneously and is quite stable. The release kinetics of rifampicin in the drug delivery system followed the Higuchi model with k1 0.5472 mg 0.5/hour pH 1.5 and k2 mg 0.5/hour pH 6.5.
Collapse
Affiliation(s)
| | - Chaidir Pratama
- Research Center for Radioisotope, Radiopharmaceutical, and Biodosimetry Technology, Research Organization of Nuclear Energy, National Research and Innovation Agency (BRIN) Indonesia
| | - Noor Anis Kundari
- Polytechnic Institute of Nuclear Technology, National Research and Innovation Agency (BRIN) Yogyakarta Indonesia
| | - Kartini Megasari
- Polytechnic Institute of Nuclear Technology, National Research and Innovation Agency (BRIN) Yogyakarta Indonesia
| | - Dhita Ariyanti
- Polytechnic Institute of Nuclear Technology, National Research and Innovation Agency (BRIN) Yogyakarta Indonesia
| | - Andri Saputra
- Department of Rubber and Plastic Processing Technology, Politeknik ATK Yogyakarta Indonesia
| | - Hersandy Dayu Kusuma
- Department of Chemistry, Faculty of Mathematics and Natural Sciences, Universitas Padjadjaran Jl. Raya Bandung - Sumedang KM. 21 Jatinangor Sumedang 45363 Indonesia
| | - Puji Astuti
- Polytechnic Institute of Nuclear Technology, National Research and Innovation Agency (BRIN) Yogyakarta Indonesia
| |
Collapse
|
2
|
Haudum S, Strasser P, Teasdale I. Phosphorus and Silicon-Based Macromolecules as Degradable Biomedical Polymers. Macromol Biosci 2023; 23:e2300127. [PMID: 37326117 DOI: 10.1002/mabi.202300127] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/24/2023] [Revised: 05/17/2023] [Indexed: 06/17/2023]
Abstract
Synthetic polymers are indispensable in biomedical applications because they can be fabricated with consistent and reproducible properties, facile scalability, and customizable functionality to perform diverse tasks. However, currently available synthetic polymers have limitations, most notably when timely biodegradation is required. Despite there being, in principle, an entire periodic table to choose from, with the obvious exception of silicones, nearly all known synthetic polymers are combinations of carbon, nitrogen, and oxygen in the main chain. Expanding this to main-group heteroatoms can open the way to novel material properties. Herein the authors report on research to incorporate the chemically versatile and abundant silicon and phosphorus into polymers to induce cleavability into the polymer main chain. Less stable polymers, which degrade in a timely manner in mild biological environments, have considerable potential in biomedical applications. Herein the basic chemistry behind these materials is described and some recent studies into their medical applications are highlighted.
Collapse
Affiliation(s)
- Stephan Haudum
- Johannes Kepler University Linz, Altenbergerstrasse 69, Linz, 4040, Austria
| | - Paul Strasser
- Johannes Kepler University Linz, Altenbergerstrasse 69, Linz, 4040, Austria
| | - Ian Teasdale
- Johannes Kepler University Linz, Altenbergerstrasse 69, Linz, 4040, Austria
| |
Collapse
|
3
|
Jin GW, Rejinold NS, Choy JH. Polyphosphazene-Based Biomaterials for Biomedical Applications. Int J Mol Sci 2022; 23:15993. [PMID: 36555633 PMCID: PMC9781794 DOI: 10.3390/ijms232415993] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/29/2022] [Revised: 11/28/2022] [Accepted: 12/08/2022] [Indexed: 12/23/2022] Open
Abstract
Recently, synthetic polymers have attracted great interest in the field of biomedical science. Among these, polyphosphazenes (PPZs) are regarded as one of the most promising materials, due to their structural flexibility and biodegradability compared to other materials. PPZs have been developed through numerous studies. In particular, multi-functionalized PPZs have been proven to be potential biomaterials in various forms, such as nanoparticles (NPs) and hydrogels, through the introduction of various functional groups. Thus, PPZs have been applied for the delivery of therapeutic molecules (low molecular weight drugs, genes and proteins), bioimaging, phototherapy, bone regeneration, dental liners, modifiers and medical devices. The main goal of the present review is to highlight the recent and the most notable existing PPZ-based biomaterials for aforementioned applications, with future perspectives in mind.
Collapse
Affiliation(s)
- Geun-Woo Jin
- Intelligent Nanohybrid Materials Laboratory (INML), Institute of Tissue Regeneration Engineering (ITREN), Dankook University, Cheonan 31116, Republic of Korea
- R&D Center, CnPharm Co., Ltd., Seoul 03759, Republic of Korea
| | - N. Sanoj Rejinold
- Intelligent Nanohybrid Materials Laboratory (INML), Institute of Tissue Regeneration Engineering (ITREN), Dankook University, Cheonan 31116, Republic of Korea
| | - Jin-Ho Choy
- Intelligent Nanohybrid Materials Laboratory (INML), Institute of Tissue Regeneration Engineering (ITREN), Dankook University, Cheonan 31116, Republic of Korea
- Department of Pre-Medical Course, College of Medicine, Dankook University, Cheonan 31116, Republic of Korea
- International Research Frontier Initiative (IRFI), Tokyo Institute of Technology, Yokohama 226-8503, Japan
- Institute of Innovative Research, Tokyo Institute of Technology, Yokohama 226-8503, Japan
| |
Collapse
|
4
|
Recent Trends in the Development of Polyphosphazenes for Bio-applications. REGENERATIVE ENGINEERING AND TRANSLATIONAL MEDICINE 2022. [DOI: 10.1007/s40883-022-00278-7] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/14/2022]
|
5
|
Ahmad M, Nawaz T, Hussain I, Chen X, Imran M, Hussain R, Assiri MA, Ali S, Wu Z. Phosphazene Cyclomatrix Network-Based Polymer: Chemistry, Synthesis, and Applications. ACS OMEGA 2022; 7:28694-28707. [PMID: 36033672 PMCID: PMC9404196 DOI: 10.1021/acsomega.2c01573] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 03/16/2022] [Accepted: 07/28/2022] [Indexed: 06/15/2023]
Abstract
Polyphosphazenes are an inorganic molecular hybrid family with multifunctional properties due to their wide range of organic substitutes. This review intends to propose the basics of the synthetic chemistry of polyphosphazene, describing for researchers outside the field the basic knowledge required to design and prepare polyphosphazenes with desired properties. A special emphasis is placed on recent advances in chemical synthesis, which allow not only the synthesis of polyphosphazenes with controlled molecular weights and polydispersities but also the synthesis of novel branched designs and block copolymers. We also investigated the synthesis of polyphosphazenes using various functional materials. This review aims to assist researchers in synthesizing their specific polyphosphazene material with unique property combinations, with the hope of stimulating further research and even more innovative applications for these highly interesting multifaceted materials.
Collapse
Affiliation(s)
- Muhammad Ahmad
- Department
of Mechanical Engineering, City University
of Hong Kong, Kowloon
Tong, Hong Kong
| | - Tehseen Nawaz
- Department
of Chemistry, The University of Hong Kong, Pok Fu Lam, Hong Kong
| | - Iftikhar Hussain
- Department
of Mechanical Engineering, City University
of Hong Kong, Kowloon
Tong, Hong Kong
| | - Xi Chen
- Department
of Mechanical Engineering, City University
of Hong Kong, Kowloon
Tong, Hong Kong
| | - Muhammad Imran
- Department
of Chemistry, Faculty of Science, King Khalid
University, P.O. Box 9004, Abha 61413, Saudi Arabia
- Research
Center for Advanced Materials Science (RCAMS), King Khalid University, P. O. Box 9004, Abha 61514, Saudi Arabia
| | - Riaz Hussain
- Division
of Science and Technology, University of
Education, Lahore 54770, Pakistan
| | - Mohammed A. Assiri
- Department
of Chemistry, Faculty of Science, King Khalid
University, P.O. Box 9004, Abha 61413, Saudi Arabia
- Research
Center for Advanced Materials Science (RCAMS), King Khalid University, P. O. Box 9004, Abha 61514, Saudi Arabia
| | - Shafqat Ali
- Department
of Environment and Civil Engineering, Dongguan
University of Technology, Dongguan 523808, P. R. China
| | - Zhanpeng Wu
- State
Key
Laboratory of Organic−Inorganic Composites, Beijing University of Chemical Technology, Beijing 100029, P. R. China
| |
Collapse
|
6
|
Gou K, Wang Y, Guo X, Wang Y, Bian Y, Zhao H, Guo Y, Pang Y, Xie L, Li S, Li H. Carboxyl-functionalized mesoporous silica nanoparticles for the controlled delivery of poorly water-soluble non-steroidal anti-inflammatory drugs. Acta Biomater 2021; 134:576-592. [PMID: 34280558 DOI: 10.1016/j.actbio.2021.07.023] [Citation(s) in RCA: 18] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/22/2021] [Revised: 06/06/2021] [Accepted: 07/12/2021] [Indexed: 11/27/2022]
Abstract
The purpose of this study was to investigate the delivery of poorly water-soluble non-steroidal anti-inflammatory drugs (NSAIDs) by carboxyl-functionalized mesoporous silica nanoparticles (MSN-COOH) with high specific surface area (SBET). In this study, MSN-COOH was prepared by collaborative self-assembly using cetyltrimethylammonium bromide (CTAB) as template and hydrolysis (3-triethoxyl-propyl) succinic anhydride (TESPSA) as co-structure auxiliary directing agent (CSDA). The drug delivery systems were constructed with NSAIDs including Nimesulide (NMS) and Indomethacin (IMC) as model drugs. Moreover, the characterization techniques, hemolysis and bio-adsorption testes, in vitro drug release and in vivo biological studies of MSN-COOH were also carried out. The characterization results showed that MSN-COOH is spheres with clearly visible irregular honeycomb nanopores and rough surface (SBET: 1257 m2/g, pore volume (VP): 1.17 cm3/g). After loading NMS/IMC into MSN-COOH with high drug loading efficiency (NMS: 98.7 and IMC: 98.2%), most crystalline NMS and IMC converted to amorphous phase confirmed using differential scanning calorimeter (DSC) and X-ray power diffraction (XRD) analysis. Meanwhile, MSN-COOH significantly increased the dissolution of NMS and IMC compared with non-functionalized mesoporous silica nanoparticles (MSN), which was also confirmed by wettability experiments. The results of in vivo biological effects showed that MSN-COOH had higher bioavailability of NMS and IMC than MSN, and exerted strong anti-inflammatory effects by delivering more NMS and IMC in vivo. STATEMENT OF SIGNIFICANCE: This study successfully prepared MSNs-COOH (mesoporous silica nanoparticles modified with negatively charged carboxyl groups on the surface and in the pores) with high specific surface area and pore volume by using the negatively charged carboxyl group (hyd-TESPSA) and the positively charged CTAB self-assembled through electrostatic attraction under alkaline conditions. The drug delivery systems were constructed with Nimesulide (NMS) and Indomethacin (IMC) as model drugs. The results showed MSNs-COOH had high drug loading capacity and also exhibited good in vitro drug release properties. Interestingly, NMS loaded MSNs-COOH also had a potential pH responsive release effect. In vivo biological studies revealed that NMS/IMC loaded MSNs-COOH could evidently improve the bioavailability and played the strong anti-inflammatory effects.
Collapse
|
7
|
Shi X, Huang C, Zheng Z, Zhong B, Ding G, Li J, You L, Wang S. Preparation of Magnetically Recoverable MPCTP-Ag Composite Nanoparticles and Their Application as High-Performance Catalysts. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2021; 37:10249-10258. [PMID: 34415769 DOI: 10.1021/acs.langmuir.1c00944] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
In the present research, magnetically recyclable polyphosphazene (PCTP)/Ag (MPCTP-Ag) nanoparticles are prepared by a green path, in which PCTP was used to modify Fe3O4 nanoparticles and provide nucleation sites for the reduction of Ag nanoparticles. The prepared MPCTP-Ag nanoparticles were characterized by TEM, SEM, EDS, BET, XRD, vibrating sample magnometry, XPS, and TGA analysis. The catalytic performances of the MPCTP-Ag nanoparticles for the degradation of 4-nitrophenol (4-NP), methylene blue (MB), methyl orange (MO), and their mixtures in the presence of NaBH4 were studied. The main factors affecting the catalytic performance, including temperature, reactant concentration, and catalyst dosage, were investigated. The results showed that the MPCTP-Ag nanoparticles exhibited excellent catalytic activity for the degradation of all three targeted organic contaminants (4-NP, MB, and MO). Moreover, the product retains its catalytic activity after being reused five times by magnetic separation. The results showed that MPCTP-Ag composite nanoparticles were efficient recyclable magnetic nanocatalysts with promising application in environment protection.
Collapse
Affiliation(s)
- Xinming Shi
- College of Biological Science and Engineering, Fuzhou University, Fuzhou 350116, China
| | - Ci Huang
- College of Biological Science and Engineering, Fuzhou University, Fuzhou 350116, China
| | - Zhijuan Zheng
- College of Biological Science and Engineering, Fuzhou University, Fuzhou 350116, China
| | - Baohua Zhong
- College of Biological Science and Engineering, Fuzhou University, Fuzhou 350116, China
| | - Guanjun Ding
- College of Biological Science and Engineering, Fuzhou University, Fuzhou 350116, China
| | - Jumei Li
- School of Chemistry and Environmental Engineering, Wuhan Institute of Technology, Wuhan 430205, China
| | - Lijun You
- College of Biological Science and Engineering, Fuzhou University, Fuzhou 350116, China
| | - Shaoyun Wang
- College of Biological Science and Engineering, Fuzhou University, Fuzhou 350116, China
| |
Collapse
|
8
|
Rastegari E, Hsiao YJ, Lai WY, Lai YH, Yang TC, Chen SJ, Huang PI, Chiou SH, Mou CY, Chien Y. An Update on Mesoporous Silica Nanoparticle Applications in Nanomedicine. Pharmaceutics 2021; 13:1067. [PMID: 34371758 PMCID: PMC8309088 DOI: 10.3390/pharmaceutics13071067] [Citation(s) in RCA: 44] [Impact Index Per Article: 14.7] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/24/2021] [Revised: 06/30/2021] [Accepted: 07/05/2021] [Indexed: 01/09/2023] Open
Abstract
The efficient and safe delivery of therapeutic drugs, proteins, and nucleic acids are essential for meaningful therapeutic benefits. The field of nanomedicine shows promising implications in the development of therapeutics by delivering diagnostic and therapeutic compounds. Nanomedicine development has led to significant advances in the design and engineering of nanocarrier systems with supra-molecular structures. Smart mesoporous silica nanoparticles (MSNs), with excellent biocompatibility, tunable physicochemical properties, and site-specific functionalization, offer efficient and high loading capacity as well as robust and targeted delivery of a variety of payloads in a controlled fashion. Such unique nanocarriers should have great potential for challenging biomedical applications, such as tissue engineering, bioimaging techniques, stem cell research, and cancer therapies. However, in vivo applications of these nanocarriers should be further validated before clinical translation. To this end, this review begins with a brief introduction of MSNs properties, targeted drug delivery, and controlled release with a particular emphasis on their most recent diagnostic and therapeutic applications.
Collapse
Grants
- MOST 108-2320-B-010 -019 -MY3; MOST 109-2327-B-010-007 Ministry of Science and Technology
- MOHW108-TDU-B-211-133001, MOHW109-TDU-B-211-114001 Ministry of Health and Welfare
- VN109-16 VGH, NTUH Joint Research Program
- VTA107-V1-5-1, VTA108-V1-5-3, VTA109-V1-4-1 VGH, TSGH, NDMC, AS Joint Research Program
- IBMS-CRC109-P04 AS Clinical Research Center
- the "Cancer Progression Research Center, National Yang-Ming University" from The Featured Areas Research Center Program within the framework of the Higher Education Sprout Project by the Ministry of Education (MOE) in Taiwan the "Cancer Progression Research Center, National Yang-Ming University" from The Featured Areas Research Center Program within the framework of the Higher Education Sprout Project by the Ministry of Education (MOE) in Taiwan
- and the Ministry of Education through the SPROUT Project- Center For Intelligent Drug Systems and Smart Bio-devices (IDS2B) of National Chiao Tung University and, Taiwan. and the Ministry of Education through the SPROUT Project- Center For Intelligent Drug Systems and Smart Bio-devices (IDS2B) of National Chiao Tung University and, Taiwan.
Collapse
Affiliation(s)
- Elham Rastegari
- Department of Medical Research, Taipei Veterans General Hospital, Taipei 11217, Taiwan; (E.R.); (Y.-J.H.); (W.-Y.L.); (Y.-H.L.); (T.-C.Y.); (S.-J.C.)
- Institute of Pharmacology, National Yang-Ming Chiao Tung University, Taipei 11217, Taiwan
- School of Medicine, National Yang-Ming Chiao Tung University, Taipei 11217, Taiwan
| | - Yu-Jer Hsiao
- Department of Medical Research, Taipei Veterans General Hospital, Taipei 11217, Taiwan; (E.R.); (Y.-J.H.); (W.-Y.L.); (Y.-H.L.); (T.-C.Y.); (S.-J.C.)
- School of Medicine, National Yang-Ming Chiao Tung University, Taipei 11217, Taiwan
| | - Wei-Yi Lai
- Department of Medical Research, Taipei Veterans General Hospital, Taipei 11217, Taiwan; (E.R.); (Y.-J.H.); (W.-Y.L.); (Y.-H.L.); (T.-C.Y.); (S.-J.C.)
- Institute of Pharmacology, National Yang-Ming Chiao Tung University, Taipei 11217, Taiwan
- School of Medicine, National Yang-Ming Chiao Tung University, Taipei 11217, Taiwan
| | - Yun-Hsien Lai
- Department of Medical Research, Taipei Veterans General Hospital, Taipei 11217, Taiwan; (E.R.); (Y.-J.H.); (W.-Y.L.); (Y.-H.L.); (T.-C.Y.); (S.-J.C.)
- Institute of Pharmacology, National Yang-Ming Chiao Tung University, Taipei 11217, Taiwan
- School of Medicine, National Yang-Ming Chiao Tung University, Taipei 11217, Taiwan
| | - Tien-Chun Yang
- Department of Medical Research, Taipei Veterans General Hospital, Taipei 11217, Taiwan; (E.R.); (Y.-J.H.); (W.-Y.L.); (Y.-H.L.); (T.-C.Y.); (S.-J.C.)
- Institute of Pharmacology, National Yang-Ming Chiao Tung University, Taipei 11217, Taiwan
- School of Medicine, National Yang-Ming Chiao Tung University, Taipei 11217, Taiwan
| | - Shih-Jen Chen
- Department of Medical Research, Taipei Veterans General Hospital, Taipei 11217, Taiwan; (E.R.); (Y.-J.H.); (W.-Y.L.); (Y.-H.L.); (T.-C.Y.); (S.-J.C.)
- Department of Ophthalmology, Taipei Veterans General Hospital, Taipei 11217, Taiwan
| | - Pin-I Huang
- Department of Oncology, Taipei Veterans General Hospital, Taipei Veterans General Hospital, Taipei 11217, Taiwan;
| | - Shih-Hwa Chiou
- Department of Medical Research, Taipei Veterans General Hospital, Taipei 11217, Taiwan; (E.R.); (Y.-J.H.); (W.-Y.L.); (Y.-H.L.); (T.-C.Y.); (S.-J.C.)
- Institute of Pharmacology, National Yang-Ming Chiao Tung University, Taipei 11217, Taiwan
- School of Medicine, National Yang-Ming Chiao Tung University, Taipei 11217, Taiwan
- Department of Ophthalmology, Taipei Veterans General Hospital, Taipei 11217, Taiwan
| | - Chung-Yuan Mou
- Department of Chemistry, National Taiwan University, Taipei 10617, Taiwan
| | - Yueh Chien
- Department of Medical Research, Taipei Veterans General Hospital, Taipei 11217, Taiwan; (E.R.); (Y.-J.H.); (W.-Y.L.); (Y.-H.L.); (T.-C.Y.); (S.-J.C.)
- Institute of Pharmacology, National Yang-Ming Chiao Tung University, Taipei 11217, Taiwan
- School of Medicine, National Yang-Ming Chiao Tung University, Taipei 11217, Taiwan
| |
Collapse
|
9
|
Fiedler C, Ulbricht C, Truglas T, Wielend D, Bednorz M, Groiss H, Brüggemann O, Teasdale I, Salinas Y. Reversible Speed Regulation of Self-Propelled Janus Micromotors via Thermoresponsive Bottle-Brush Polymers. Chemistry 2021; 27:3262-3267. [PMID: 33205559 PMCID: PMC7898474 DOI: 10.1002/chem.202004792] [Citation(s) in RCA: 9] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/01/2020] [Indexed: 01/01/2023]
Abstract
This work reports a reversible braking system for micromotors that can be controlled by small temperature changes (≈5 °C). To achieve this, gated-mesoporous organosilica microparticles are internally loaded with metal catalysts (to form the motor) and the exterior (partially) grafted with thermosensitive bottle-brush polyphosphazenes to form Janus particles. When placed in an aqueous solution of H2 O2 (the fuel), rapid forward propulsion of the motors ensues due to decomposition of the fuel. Conformational changes of the polymers at defined temperatures regulate the bubble formation rate and thus act as brakes with considerable deceleration/acceleration observed. As the components can be easily varied, this represents a versatile, modular platform for the exogenous velocity control of micromotors.
Collapse
Affiliation(s)
- Christine Fiedler
- Institute of Polymer ChemistryJohannes Kepler University LinzAltenbergerstraße 694040LinzAustria
| | - Christoph Ulbricht
- Institute of Physical Chemistry-Linz Institute for Organic Solar CellsJohannes Kepler University LinzAltenbergerstraße 694040LinzAustria
| | - Tia Truglas
- Christian Doppler Laboratory for Nanoscale Phase TransformationsCenter of Surface and NanoanalyticsJohannes Kepler University LinzAltenbergerstraße 694040LinzAustria
| | - Dominik Wielend
- Institute of Physical Chemistry-Linz Institute for Organic Solar CellsJohannes Kepler University LinzAltenbergerstraße 694040LinzAustria
| | - Mateusz Bednorz
- Institute of Physical Chemistry-Linz Institute for Organic Solar CellsJohannes Kepler University LinzAltenbergerstraße 694040LinzAustria
| | - Heiko Groiss
- Christian Doppler Laboratory for Nanoscale Phase TransformationsCenter of Surface and NanoanalyticsJohannes Kepler University LinzAltenbergerstraße 694040LinzAustria
| | - Oliver Brüggemann
- Institute of Polymer ChemistryJohannes Kepler University LinzAltenbergerstraße 694040LinzAustria
| | - Ian Teasdale
- Institute of Polymer ChemistryJohannes Kepler University LinzAltenbergerstraße 694040LinzAustria
- Linz Institute of TechnologyJohannes Kepler University LinzAltenbergerstraße 694040LinzAustria
| | - Yolanda Salinas
- Institute of Polymer ChemistryJohannes Kepler University LinzAltenbergerstraße 694040LinzAustria
- Linz Institute of TechnologyJohannes Kepler University LinzAltenbergerstraße 694040LinzAustria
| |
Collapse
|
10
|
Mohamed Isa ED, Ahmad H, Abdul Rahman MB, Gill MR. Progress in Mesoporous Silica Nanoparticles as Drug Delivery Agents for Cancer Treatment. Pharmaceutics 2021; 13:152. [PMID: 33498885 PMCID: PMC7911720 DOI: 10.3390/pharmaceutics13020152] [Citation(s) in RCA: 38] [Impact Index Per Article: 12.7] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/26/2020] [Revised: 12/31/2020] [Accepted: 01/08/2021] [Indexed: 12/24/2022] Open
Abstract
Cancer treatment and therapy have made significant leaps and bounds in these past decades. However, there are still cases where surgical removal is impossible, metastases are challenging, and chemotherapy and radiotherapy pose severe side effects. Therefore, a need to find more effective and specific treatments still exists. One way is through the utilization of drug delivery agents (DDA) based on nanomaterials. In 2001, mesoporous silica nanoparticles (MSNs) were first used as DDA and have gained considerable attention in this field. The popularity of MSNs is due to their unique properties such as tunable particle and pore size, high surface area and pore volume, easy functionalization and surface modification, high stability and their capability to efficiently entrap cargo molecules. This review describes the latest advancement of MSNs as DDA for cancer treatment. We focus on the fabrication of MSNs, the challenges in DDA development and how MSNs address the problems through the development of smart DDA using MSNs. Besides that, MSNs have also been applied as a multifunctional DDA where they can serve in both the diagnostic and treatment of cancer. Overall, we argue MSNs provide a bright future for both the diagnosis and treatment of cancer.
Collapse
Affiliation(s)
- Eleen Dayana Mohamed Isa
- Department of Chemical and Environmental Engineering, Malaysia-Japan International Institute of Technology, Universiti Teknologi Malaysia, Jalan Sultan Yahya Petra, Kuala Lumpur 54100, Malaysia;
| | - Haslina Ahmad
- Department of Chemistry, Faculty of Science, Universiti Putra Malaysia, UPM Serdang 43000, Malaysia;
- UPM-MAKNA Cancer Research Laboratory, Institute of Bioscience, Universiti Putra Malaysia, UPM Serdang 43400, Malaysia
| | | | - Martin R. Gill
- Department of Chemistry, Swansea University, Swansea SA2 8PP, UK;
| |
Collapse
|
11
|
Ogueri KS, Ogueri KS, Ude CC, Allcock HR, Laurencin CT. Biomedical applications of polyphosphazenes. MEDICAL DEVICES & SENSORS 2020; 3:e10113. [PMID: 33889811 PMCID: PMC8059710 DOI: 10.1002/mds3.10113] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/28/2020] [Accepted: 07/27/2020] [Indexed: 12/21/2022]
Abstract
Ever since the pioneering research efforts on their utility in biomedicine, polyphosphazene polymers have witnessed enormous growth and expansion in several biomedical applications due to their unique properties. The development of this exceptional biodegradable system with extraordinary design flexibility, property tunability and neutral bioactivity could stimulate an unprecedented paradigm in biomaterial design. Thus, polyphosphazenes are, undoubtedly, the next-generation biomaterials. This editorial provides a brief perspective on the promising prospects of polyphosphazene-based biomaterials for medical device technology, focusing mainly on the authors' work on this particular polymeric system.
Collapse
Affiliation(s)
- Kenneth S. Ogueri
- Department of Materials Science and Engineering, University of Connecticut, Storrs, Connecticut, USA
- Connecticut Convergence Institute for Translation in Regenerative Engineering, University of Connecticut Health Center, Farmington, Connecticut, USA
| | - Kennedy S. Ogueri
- Department of Chemistry, The Pennsylvania State University, University Park, Pennsylvania, USA
| | - Chinedu C. Ude
- Connecticut Convergence Institute for Translation in Regenerative Engineering, University of Connecticut Health Center, Farmington, Connecticut, USA
- Department of Orthopaedic Surgery, University of Connecticut Health Center, Farmington, Connecticut, USA
| | - Harry R. Allcock
- Department of Chemistry, The Pennsylvania State University, University Park, Pennsylvania, USA
| | - Cato T. Laurencin
- Department of Materials Science and Engineering, University of Connecticut, Storrs, Connecticut, USA
- Connecticut Convergence Institute for Translation in Regenerative Engineering, University of Connecticut Health Center, Farmington, Connecticut, USA
- Department of Orthopaedic Surgery, University of Connecticut Health Center, Farmington, Connecticut, USA
- Department of Chemical and Biomolecular Engineering, University of Connecticut, Storrs, Connecticut, USA
- Department of Biomedical Engineering, University of Connecticut, Storrs, Connecticut, USA
| |
Collapse
|