CuO nanorods grown vertically on graphene nanosheets as a battery-type material for high-performance supercapacitor electrodes

Chemical synthesis and super capacitance performance of novel CuO@Cu4O3/rGO/PANI nanocomposite electrode

Copper oxide-based nanocomposites are promising electrode materials for high-performance supercapacitors due to their unique properties that aid electrolyte access and ion diffusion to the electrode surface. Herein, a facile and low-cost synthesis in situ strategy based on co-precipitation and incorporation processes of reduced graphene oxide (rGO), followed by in situ oxidative polymerization of aniline monomer has been reported. CuO@Cu4O3/rGO/PANI nanocomposite revealed the good distribution of CuO@Cu4O3 and rGO within the polymer matrix which allows improved electron transport and ion diffusion process. Galvanostatic charge-discharge (GCD) results displayed a higher specific capacitance value of 508 F g-1 for CuO@Cu4O3/rGO/PANI at 1.0 A g-1 in comparison to the pure CuO@Cu4O3 278 F g-1. CuO@Cu4O3/rGO/PANI displays an energy density of 23.95 W h kg-1 and power density of 374 W kg-1 at the current density of 1 A g-1 which is 1.8 times higher than that of CuO@Cu4O3 (13.125 W h kg-1) at the same current density. The retention of the electrode was 93% of its initial capacitance up to 5000 cycles at a scan rate of 100 mV s-1. The higher capacitance of the CuO@Cu4O3/rGO/PANI electrode was credited to the formation of a fibrous network structure and rapid ion diffusion paths through the nanocomposite matrix that resulted in enhanced surface-dependent electrochemical properties.

RGO nanosheet wrapped β-phase NiCu2S nanorods for advanced supercapacitor applications

A new integration strategy of transition metal sulfide with carbon-based materials is used to boost its catalytic property and electrochemical performances in supercapacitor application. Herein, crystalline reduced graphene oxide (rGO) wrapped ternary metal sulfide nanorod composites with different rGO ratios are synthesized using hydrothermal technique and are compared for their physical, chemical, and electrochemical performances. It is found that their properties are tuned by the weight ratios of rGO. The electrochemical investigations reveal that β-NiCu₂S/rGO nanocomposite electrode with 0.15 wt.% of rGO is found to possess maximum specific capacitance of 1583 F g^-1 at current density of 15 mA g^-1 in aqueous electrolyte medium. The same electrode shows excellent cycling stability with capacitance retention of 89% after 5000 charging/discharging cycles. The reproducibility test performed on NiCu₂S/rGO nanocomposite electrode with 0.15 wt.% of rGO indicates that it has high reproducible capacitive response and rate capability. Thus, the present work demonstrates that the β-NiCu₂S/rGO nanocomposite can serve as a potential electrode material for developing supercapacitor energy storage system.

Preparation of Graphene Oxide/La2Ti2O7 Composites with Enhanced Electrochemical Performances for Supercapacitors

A series of graphene oxide (GO)/lanthanum titanate (La2Ti2O7, LTO) fiber composites were prepared through a hydrothermal method. The LTO fibers were homogeneously dispersed between the GO sheets. The structure and micromorphology of the GO/LTO composites were systematically studied. The composite exhibited a high specific capacitance of 900.6 F g-1 at a current density of 1 A g-1 in the 1 M H2SO4 and 10 wt % sucrose aqueous solution as the electrolyte. With the extended potential window of 1.8 V, the fabricated asymmetric supercapacitor device delivered a maximum energy density of 94.0 Wh kg-1 at a power density of 750.1 W kg-1. The GO/LTO composites could be promising materials for energy storage.

Enhancing electrochemical performance of electrode material via combining defect and heterojunction engineering for supercapacitors

The poor conductivity and deficient active sites of transition metal oxides lead to low energy density of supercapacitors, which limits their wide application. In this work, double transition metal oxide heterojunctions with oxygen vacancy (V_o-ZnO/CoO) nanowires are prepared by effective hydrothermal and thermal treatments. The formation of the heterojunction results in the redistribution of interface charge between ZnO and CoO, generating an internal electric field to accelerate the electron transport. Meanwhile, oxygen vacancies can enhance the redox reaction activity to further improve the electrochemical kinetics of the electrode material. Therefore, the prepared V_o-ZnO/CoO can provide a superior specific capacity of 845 C g^-1 (1 A g^-1). An asymmetric supercapacitor with the V_o-ZnO/CoO as positive electrode shows a higher energy density of 51.6 Wh kg^-1 when the power density reaches 799.9 W kg^-1. This work proposes a synergistic combination of defect and heterojunction engineering to improve the electrochemical properties of materials, providing an important guidance for material design in energy-storage field.