Synthesis of 2D MoS2(1−x)Se2x semiconductor alloy by chemical vapor deposition

Band Gap Engineering of MoxW1-xS2 Alloy Monolayers with Wafer-Scale Uniformity

Modulating the band gap of two-dimensional (2D) transition metal dichalcogenide (TMDC) semiconductors is critical for their application in a wider spectral range. Alloying has been demonstrated as an effective method for regulating the band gap of 2D TMDC semiconductors. The fabrication of large-area 2D TMDC alloy films with centimeter-scale uniformity is fundamental to the application of integrated devices. Herein, we report a liquid-phase precursor one-step chemical vapor deposition (CVD) method for fabricating a MoxW1-xS2 alloy monolayer with a large size and an adjustable band gap. Good crystalline quality and high uniformity on a wafer scale enable the continuous adjustment of its band gap in the range of 1.8-2.0 eV. Density functional theory calculations provided a deep understanding of the Raman-active vibration modes of the MoxW1-xS2 alloy monolayer and the change in the conductivity of the alloy with photon energy. The synthesis of large-area MoxW1-xS2 alloy monolayers is a critical step toward the application of 2D layered semiconductors in practical optoelectronic devices.

Atomically Substitutional Engineering of Transition Metal Dichalcogenide Layers for Enhancing Tailored Properties and Superior Applications

Transition metal dichalcogenides (TMDs) are a promising class of layered materials in the post-graphene era, with extensive research attention due to their diverse alternative elements and fascinating semiconductor behavior. Binary MX2 layers with different metal and/or chalcogen elements have similar structural parameters but varied optoelectronic properties, providing opportunities for atomically substitutional engineering via partial alteration of metal or/and chalcogenide atoms to produce ternary or quaternary TMDs. The resulting multinary TMD layers still maintain structural integrity and homogeneity while achieving tunable (opto)electronic properties across a full range of composition with arbitrary ratios of introduced metal or chalcogen to original counterparts (0-100%). Atomic substitution in TMD layers offers new adjustable degrees of freedom for tailoring crystal phase, band alignment/structure, carrier density, and surface reactive activity, enabling novel and promising applications. This review comprehensively elaborates on atomically substitutional engineering in TMD layers, including theoretical foundations, synthetic strategies, tailored properties, and superior applications. The emerging type of ternary TMDs, Janus TMDs, is presented specifically to highlight their typical compounds, fabrication methods, and potential applications. Finally, opportunities and challenges for further development of multinary TMDs are envisioned to expedite the evolution of this pivotal field.

Study of Ion Velocity Effect on the Band Gap of CVD-Grown Few-Layer MoS2

The present work reports on a simple chemical vapor deposition (CVD) technique that employs alkali halide (NaCl) to synthesize high-quality few-layer MoS2 by reducing growth temperature from 850 to 650 °C, and its ion irradiation study for band gap modification. The Raman peak position difference of A1g to E12g of ≈24.5 cm-1 for the synthesized MoS2 corresponds to a few layers (<5 monolayers) of MoS2 on the substrate, as also confirmed by atomic force microscopy (AFM). The optical image shows the continuous distribution of flakes throughout the substrate and the average area of flakes ≈0.2 μm2 as confirmed by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) analysis. Swift heavy-ion (SHI) irradiation at 60, 100, and 150 MeV ion energies of 1 × 1012 ions/cm2 ion fluence have been used to modify the band gap in few-layer MoS2. The ions with two different energies are chosen at two sides of the Bragg peak of energy loss curve in such a way as to have the same value of electronic energy loss (Se) but different ion energies to examine the velocity effect for the ion-induced modification. The absorbance peaks for 60 and 150 MeV irradiated samples show the same effect in the band gap modification.

Controllable growth of wafer-scale monolayer transition metal dichalcogenides ternary alloys with tunable band gap

The tuning of band gap is very important for the application of two-dimensional (2D) materials in optoelectronic devices. Alloying of 2D transition metal dichalcogenides (TMDCs) is an important way to tune the wide band gap. In this study, we report a multi-step vapor deposition method to grow monolayer TMDC ternary alloy films with wafer scale, including Mo_1-xW_xS₂, Mo_1-xW_xSe₂and MoS_2xSe_2(1-x), which are accurately controllable in the elemental proportion (xis from 0 to 1). The band gap of the three 2D ternary alloy materials are continuously tuned for the whole range of metal and chalcogen compositions. The metal compositions are controlled by the as-deposited thickness. Raman, photoluminescence, elemental maps and TEM show the high spatial homogeneity in the compositions and optical properties across the whole wafer. The band gap can be continuously tuned from 1.86 to 1.99 eV for Mo_1-xW_xS₂, 1.56 to 1.65 eV for Mo_1-xW_xSe₂, 1.56 to 1.86 eV for MoS_2xSe_2(1-x). Electrical transport measurements indicate that Mo_1-xW_xS₂and MoS_2xSe_2(1-x)monolayers shown-type semiconductor behaviors, and the carrier types of Mo_1-xW_xSe₂can be tuned asn-type, bipolar andp-type. Moreover, this control process can be easily generalized to other 2D alloy films, even to quaternary or multi-element alloy materials. Our study presents a promising route for the preparation of large-scale homogeneous monolayer TMDC alloys and the application for future functional devices.

2D Materials (WS2, MoS2, MoSe2) Enhanced Polyacrylamide Gels for Multifunctional Applications

Multifunctional polymer composite gels have attracted attention because of their high thermal stability, conductivity, mechanical properties, and fast optical response. To enable the simultaneous incorporation of all these different functions into composite gels, the best doping material alternatives are two-dimensional (2D) materials, especially transition metal dichalcogenides (TMD), which have been used in so many applications recently, such as energy storage units, opto-electronic devices and catalysis. They have the capacity to regulate optical, electronic and mechanical properties of basic molecular hydrogels when incorporated into them. In this study, 2D materials (WS₂, MoS₂ and MoSe₂)-doped polyacrylamide (PAAm) gels were prepared via the free radical crosslinking copolymerization technique at room temperature. The gelation process and amount of the gels were investigated depending on the optical properties and band gap energies. Band gap energies of composite gels containing different amounts of TMD were calculated and found to be in the range of 2.48–2.84 eV, which is the characteristic band gap energy range of promising semiconductors. Our results revealed that the microgel growth mechanism and gel point of PAAm composite incorporated with 2D materials can be significantly tailored by the amount of 2D materials. Furthermore, tunable band gap energies of these composite gels are crucial for many applications such as biosensors, cartilage repair, drug delivery, tissue regeneration, wound dressing. Therefore, our study will contribute to the understanding of the correlation between the optical and electronic properties of such composite gels and will help to increase the usage areas so as to obtain multifunctional composite gels.

First principles study on structural, electronic and optical properties of HfS2(1-x)Se2x and ZrS2(1-x)Se2x ternary alloys

Alloying 2D transition metal dichalcogenides (TMDs) with dopants to achieve ternary alloys is as an efficient and scalable solution for tuning the electronic and optical properties of two-dimensional materials. This study provides a comprehensive study on the electronic and optical properties of ternary HfS_2(1−x)Se_2(x) and ZrS_2(1−x)Se_2(x) [0 ≤ x ≤ 1] alloys, by employing density functional theory calculations along with random phase approximation. Phonon dispersions were also obtained by using density functional perturbation theory. The results indicate that both of the studied ternary families are stable and the increase of Selenium concentration in HfS_2(1−x)Se_2(x) and ZrS_2(1−x)Se_2(x) alloys results in a linear decrease of the electronic bandgap from 2.15 (ev) to 1.40 (ev) for HfS_2(1−x)Se_2(x) and 1.94 (ev) to 1.23 (ev) for ZrS_2(1−x)Se_2(x) based on the HSE06 functional. Increasing the Se concentration in the ternary alloys results in a red shift of the optical absorption spectra such that the main absorption peaks of HfS_2(1−x)Se_2(x) and ZrS_2(1−x)Se_2(x) cover a broad visible range from 3.153 to 2.607 eV and 2.405 to 1.908 eV, respectively. The studied materials appear to be excellent base materials for tunable electronic and optoelectronic devices in the visible range.

Adding Selenium to HfS₂ and ZrS₂ two-dimensional materials allows tuning the optical properties in a wide visible spectrum that can be used in various electronic and optical applications, including solar cells.

Review of strategies toward the development of alloy two-dimensional (2D) transition metal dichalcogenides

Atomically thin two-dimensional (2D) transition metal dichalcogenides (TMDCs) have attracted significant attention owing to their prosperity in material research. The inimitable features of TMDCs triggered the emerging applications in diverse areas. In this review, we focus on the tailored and engineering of the crystal lattice of TMDCs that finally enhance the efficiency of the material properties. We highlight several preparation techniques and recent advancements in compositional engineering of TMDCs structure. We summarize different approaches for TMDCs such as doping and alloying with different materials, alloying with other 2D metals, and scrutinize the technological potential of these methods. Beyond that, we also highlight the recent significant advancement in preparing 2D quasicrystals and alloying the 2D TMDCs with MAX phases. Finally, we highlight the future perspectives for crystal engineering in TMDC materials for structure stability, machine learning concept marge with materials, and their emerging applications.

Optoelectronic Properties of Atomically Thin MoxW(1-x)S2 Nanoflakes Probed by Spatially-Resolved Monochromated EELS

Band gap engineering of atomically thin two-dimensional (2D) materials has attracted a huge amount of interest as a key aspect to the application of these materials in nanooptoelectronics and nanophotonics. Low-loss electron energy loss spectroscopy has been employed to perform a direct measurement of the band gap in atomically thin MoxW(1-x)S2 nanoflakes. The results show a bowing effect with the alloying degree, which fits previous studies focused on excitonic transitions. Additional properties regarding the Van Hove singularities in the density of states of these materials, as well as high energy excitonic transition, have been analysed as well.

Large-scale MoS2(1-x)Se2xmonolayers synthesized by confined-space CVD

Alloy engineering is efficient in modulating the electronic structure and physical and chemical properties of Transition metal dichalcogenides (TMDs). Here, we develop an efficient and simple confined-space CVD strategy by using a smaller quartz boat nested in a larger quartz boat for the preparation of ternary alloy MoS_2(1-x)Se_2xmonolayers on SiO₂/Si substrates with controllable composition. The effect of hydrogen ratio of the mixed carrier gas (Ar/H₂) on the resultant flakes are systematically investigated. A hydrogon ratio of 15% is demonstrated to be the most appropriate to synthesize large size (more than 400μm) single crystalline MoS_2(1-x)Se_2xalloy monolayers. The composition of the alloy can also be changed in a full range (2x= 0-2) by changing the weight ratio of Se and S powder. The as-grown monolayer MoS_2(1-x)Se_2xalloys present continuously high crystal quality in terms of Raman and PL measurements. Furthermore, to visible light (532 nm), the MoS_2(1-x)Se_2xbased photodetectors display wonderful photoresponse with a fast response of less than 50 ms. Our work may be usedful in directing the synthesis of TMDs alloys as well as their optoelectronic applications.