Photocatalytic degradation of organic dyes: Pd-γ-Al2O3 and PdO-γ-Al2O3 as potential photocatalysts

Biodegradable cobalt and tin doped chitosan nanocomposites from structure tailoring to solar-driven photocatalytic degradation of toxic organic dyes

The primary concern is the large amounts of emitted organic dyes through wastewater from numerous sectors. One of the most hazardous dyes commonly used in the industrial sector is methyl violet. It has been known to cause skin, gastric, and respiratory disorders. Therefore, a novel photocatalyst based on cobalt‑tin sulfide (Co3Sn2S2) was prepared using the solvothermal process. The photocatalyst was supplemented with Chitosan to prepare the cobalt tin sulfide-chitosan composite (Co3Sn2S2/Chi) for the photocatalytic degradation of methyl violet dye. Based on EDX analysis, a definite ratio of tin, cobalt, and sulfide was found. The FTIR of Co3Sn2S2/Chi revealed the characteristic bands of chitosan and metal sulfide bonds. SEM results showed that the particle had an irregular shape. The composite's crystalline structure was identified by XRD analysis as being 56 nm in crystalline size. The photocatalyst had a narrow band gap of 1.02 eV. At ideal conditions, the developed photocatalyst demonstrated greater degradation efficiency of methyl violet dye under solar light irradiation. The photocatalyst successfully decomposed 95 % of the methyl violet dye (40 ppm) within 70 min, operating at a pH of 9.0. This remarkable degradation was achieved by employing 0.25 g of the photocatalyst. The photocatalyst is more appealing and can be reused for up to three successive cycles. The photocatalyst is well-suited for "pseudo-first-order kinetics" to decontaminate methyl violet dye. The novel photocatalyst showed the most robust ability to decolorize methyl violet when exposed to sunlight and was a viable substitute for dye detoxification of organic dyes from wastewater.

Robust regenerable metal-selenide-chitosan photocatalyst for the effective removal of Bromothymol Blue (BB) from wastewater

Water scarcity has been a crucial debate in recent years regarding the critical scenario of water pollution. The water body is continuously contaminated by organic effluents of textile industries, including pigmented dye pollutants. To tackle water bodies contamination, there is a need to develop an eco-friendly and efficient method for removing toxic dyes. Herein, ternary metal selenide nanocomposites of barium nickel selenide (NBSe-NPs) were synthesized by the solvothermal method supported by chitosan microsphere (NBSe-NPs-CM). Recovery of the catalyst was convenient by capping nanoparticles in the microsphere to maintain effective stability, biocompatibility, and well-designed surface coating. FTIR spectrum verified nanocomposite synthesis and chitosan microsphere (NBSe-CM) formation. SEM observations of nanocomposites and NBSe-CM indicated an average size of 13.78 nm and 253 μm, respectively. The presence of barium, nickel, and selenium elements in the NBS-NPs was verified by EDX analysis. The nanocomposites had a crystallite size of 15.73 nm. The photocatalyst exhibited a narrow bandgap of only 1.3 eV based on Tauc's plot. In addition, the synthesized microsphere demonstrated an efficient photocatalytic degradation (97 %) of Bromothymol Blue dye within 100 min under optimized operating conditions (pH of 6.0, dye concentration of 40 ppm, catalyst dosage of 0.25 g). The photocatalysis process followed the pseudo-first-order kinetics. The repeatability studies showed a slight decline in the catalyst's efficiency after four successive cycles. The DFT study shows that the NBSe-CM is energetically stable with more considerable negative binding energy, and the dye molecule interacts more strongly with the NBSe-CM surface. The findings highlight the exceptional characteristics of the newly designed ternary-metal-selenide-containing chitosan-microspheres for degrading dye contaminants from textile effluents.

Supercritical CO2 mediated construction of aluminium waste recovered γ-Al2O3 impregnated Dracaena trifasciata biomass-derived carbon composite: A robust electrocatalyst for mutagenic pollutant detection

Inspired by the waste-to-wealth concept, we have recovered the gamma phase aluminium oxide nanoparticles (γ-Al2O3 NPs) from waste aluminium (Al) foils and fabricated a composite with Dracaena trifasciata biomass-derived activated carbon matrix (DT-AC) using supercritical carbon-di-oxide (SC-CO2) pathway. The prepared samples are characterized altogether by various micro- and spectroscopic analyses. Based on the results, the recovered γ-Al2O3 NPs are well impregnated in the DT-AC surface by the action of the microbubble effect from the SC-CO2. The higher D-band and ID/IG value of 1.07 in the Al2O3/DT-AC nanocomposite indicate increased defects and the amorphous nature of the carbon materials. The effect of scan rate (ν) demonstrated greater linearity in ν1/2 vs peak current in the electrochemical detection study of the mutagenic pollutant 4-(methylamino) phenol hemi sulfate, showing a quasi-reversible electron transfer process undergoing diffusion-controlled kinetics. Furthermore, the limit of detection is determined to be 3.2 nM L-1 with an extensive linear range, spanning from 0.05 to 618.25 µM/L. The incredible sensitivity of 2.117 μA μM-1 cm-2, along with excellent selectivity, repeatability, and stability, is observed. Further, the respectable recovery percentage of 98.61 % in the environmental water sample is perceived. The observed outcomes suggest that the prepared Al2O3/DT-AC composite performs as an excellent electrocatalyst material, and the processing techniques used are thought to be sustainable in nature.

Harvesting visible light for enhanced catalytic degradation of wastewater using TiO2@Fe3O4 embedded on two dimensional reduced graphene oxide nanosheets

Carbon-integrated binary metal oxide semiconductors have gained prominence in the last decade as a better material for photocatalytic wastewater treatment technology. In this regard, this research describes the investigation of the binary metal oxide TiO2@Fe3O4 embedded on reduced graphene oxide (rGO) nanosheets synthesized through a combination of sol-gel, chemical precipitation, and Hummer's processes. Besides, the catalyst is applied for the photocatalytic degradation of organic chlorophenol pollutants. The characterized diffraction results showed the peak broadening of the rGO-TiO2@Fe3O4 composite formed with tetragonal and cubic structures having small crystallite sizes. The TEM observation shows an enormous miniature of TiO2@Fe3O4 nanospheres spread on the folded 2D-rGO nanosheets with a large BET surface area. The XPS result holds the mixed phases of Fe3O4 and Fe2O3. Finally, the catalyst demonstrated a low band gap with extended light absorption towards visible light irradiation. The synergistic interactions between Fe3+ and Fe2+ improved the visible light activity due to the incorporation of rGO, and also possessed good recycling capacity. The increased mobility of electrons at the interfaces of TiO2 and Fe3O4 due to the mixing of rGO results in the separation of charge carriers by elevating the photocatalytic degradation efficiency of chlorophenol.

Synthesis and application of novel microporous framework of nanocomposite from trona for photocatalysed degradation of methyl orange dye

Photocatalysed degradation of environmental contaminants is one of the most fashionable technologies in the purification of water because the method converts toxic products to nontoxic ones. In this study, a method has been developed to synthesize novel nanocomposites of Na-Ca-Al-Si oxides for the first time. The average surface area, pore volume and pore size for the novel product were 1742.55 m2/g, 0.3499 cc/g and 3.197 nm respectively. The crystal parameters were a = 7.1580 Å, b = 7.4520 Å, c = 7.7160 Å, α = 115.0600, β = 107.3220, γ = 100.4380, density (calculated) = 2.0 × 103g/cm3 and cell volume = 332.7 Å3 respectively. The average crystalline size deduced from the Scherrer equation (i.e. 6.9393 nm) was higher than the value of 1.024 nm obtained from the graphical method. The FTIR and UV spectra of the nanocomposites were unique and provided baseline information that characterises the new product. XRD profiling of the new product reveals the existent of a silica framework consisting of NaAlSi3O3 and CaAl2Si2O8 The synthesized nanocomposites is an effective photocatalyst for the degradation of methyl orange dye in water, with aoptimum efficiency of 96% at an initial dye concentration of 10 ppm, the adsorbent dosage of 0.5 g,contact time of 90 min and pH of 2.5. The Langmuir-Hinshelwood, modified Freundlich and pseudo-second kinetic models were significant in the description of the photocatalytic kinetics of the degraded dye molecules.

Green synthesis of zinc oxide nanoparticles using Brassica oleracea var. botrytis leaf extract: Photocatalytic, antimicrobial and larvicidal activity

Green synthesis of nanomaterials has emerged as an ecofriendly sustainable technology for the removal of dyes in the last few decades. Especially, plant leaf extracts have been considered as inexpensive and effective materials for the synthesis of nanoparticles. In this study, zinc oxide nanoparticles (ZnO NPs) were prepared using leaves extract of Brassica oleracea var. botrytis (BO) by co-precipitation and applied for photocatalytic/antibacterial activity. The synthesized BO-ZnO NPs was characterized by different instrumental techniques. The UV-vis Spectrum of the synthesized material showed maximum absorbance at a wavelength of 311 nm, which confirmed the formation of BO-ZnO NPs. The XRD pattern of BO-ZnO NPs represents a hexagonal wurtzite structure and the average size of particles was about 52 nm. FT-IR spectrum analysis confirms the presence of hydroxyl, carbonyl, carboxylic, and phenol groups. SEM images exhibited a flower like morphology and EDX spectrum confirming the presence of the elements Zn and O. Photo-catalytic activity of BO-ZnO NPs was tested against thiazine dye (methylene blue-MB) degradation under direct sunlight irradiation. Around 80% of the MB dye got degraded at pH 8 under 75 min of sunlight irradiation. Further, the study examined that the antimicrobial and larvicidal activity of BO-ZnO NPs obtained through green synthesis. The antimicrobial study results showed that the BO-ZnO NPs formed zones against bacterial pathogens. The results showed the formation of an inhibition zone against B. subtills (16 mm), S.aureus (13 mm), K. pneumonia (13 mm), and E. coli (9 mm) respectively at a concentration of 100 μg/mL of BO-ZnO NPs. The larvicidal activity of the BO-ZnO NPs was tested against the fourth instar of Culex quinquefasciatus mosquito larvae The LC₅₀ and LC₉₀ values estimated through the larvicidal activity of BO-ZnO NPs were 76.03, 190.03 ppm respectively. Hence the above findings propose the synthesized BO-ZnO NPs by the ecofriendly method can be used for various environmental and antipathogenic applications.

Green Synthesis and Photocatalytic Dye Degradation Activity of CuO Nanoparticles

The degradation of dyes is a difficult task due to their persistent and stable nature; therefore, developing materials with desirable properties to degrade dyes is an important area of research. In the present study, we propose a simple, one-pot mechanochemical approach to synthesize CuO nanoparticles (NPs) using the leaf extract of Seriphidium oliverianum, as a reducing and stabilizing agent. The CuO NPs were characterized via X-ray diffraction (XRD), scanning electron microscopy (SEM), photoluminescence (PL) and Fourier-transform infrared spectroscopy (FTIR). The photocatalytic activity of CuO NPs was monitored using ultraviolet-visible (UV-Vis) spectroscopy. The CuO NPs exhibited high potential for the degradation of water-soluble industrial dyes. The degradation rates for methyl green (MG) and methyl orange (MO) were 65.231% ± 0.242 and 65.078% ± 0.392, respectively. Bio-mechanochemically synthesized CuO NPs proved to be good candidates for efficiently removing dyes from water.

Photocatalysis of environmental organic pollutants and antioxidant activity of flavonoid conjugated gold nanoparticles

The unique properties of nanomaterials have the potential application in different fields of biomedical application along with the management of environmental pollutants. This research work involved the isolation of hesperidin from the orange peel and the preparation of hesperidin gold nanoparticles by the chemical reduction method. The high substrate specificity and lower band gap enable the excitation of gold nanoparticles in visible light. Hence gold nanoparticles are chosen nowadays for the management and removal of organic pollutants. The efficacy of hesperidin gold nanoparticles was evaluated by the photocatalytic activity on organic dyes and pollutants like methyl orange, methylene blue, bromocresol green, and 4 - nitro phenol with sodium borohydride as reducing agent and the antioxidant study by scavenging of free radicals of DPPH, ABTS, and hydroxyl free radicals of hydrogen peroxide. The kinetics of photocatalytic degradation of organic dyes and 4 - nitro phenol was found to follow the first order with rate constants of 10 × 10^-3, 37 × 10^-3, 23 × 10^-3 and 49 × 10^-3 min^-1 for methyl orange, methylene blue, bromocresol green and 4 - nitro phenol respectively. The hesperidin gold nanoparticles showed significant antioxidant activity as compared to ascorbic acid as standard. The flavonoid conjugated gold nanoparticles can be an efficient antioxidant and photocatalyst for the management of different diseases and wastewater treatment respectively.

Iron Porphyrin as a Cytochrome P450 Model for the Degradation of Dye

Organic dyes are widely used in the textile, biological, medical and other fields. However, a serious environmental problem has appeared because of the presence of organic dyes in industrial aqueous effluents. Thus, the efficient treatment of organic dyes in industrial wastewaters is currently in real demand. The current study investigated the oxidative degradation of the organic dye gentian violet by meso-tetra(carboxyphenyl) porphyriniron(III), [Fe^III(TCPP)] as a cytochrome P450 model and iodosylbenzene (PhIO) as an oxidant at room temperature. The degradation reaction was monitored by UV-vis absorption spectroscopy via the observation of UV-vis spectral changes of the gentian violet. The results showed that the efficiency of catalyzed degradation reached more than 90% in 1 h, indicating the remarkable oxidative degradation capacity of the [Fe^III(TCPP)]/PhIO system, which provided an efficient approach for the treatment of dyeing wastewater.

Spray pyrolysis synthesis and UV-driven photocatalytic activity of mesoporous Al2O3@TiO2 microspheres

Mesoporous microspheres of Al₂O₃@TiO₂ were effe ctively and rapidly prepared by the sol-spray pyrolysis (SP) method. Ultrasonic-induced droplets containing titania sol, boehmite sol, and citric acid (CA) were pyrolyzed to γ-Al₂O₃-incorporated anatase TiO₂ microspheres. The SP-derived Al₂O₃@TiO₂ microspheres exhibited higher porosity and lower bandgap energy than pure TiO₂ and commercial P25. The TiO₂ microspheres incorporated with 5 wt% amorphous γ-Al₂O₃ efficiently removed tetracycline (TC) after 60 min of pre-adsorption and 140 minutes of UV illumination (removal efficiency ~ 91%, surpassing those of pure TiO₂ and commercial P25). Introducing amorphous γ-Al₂O₃ into the anatase TiO₂ matrix created a synergetic effect that enhanced the accumulation of TC onto the catalyst surface; meanwhile, the formation of defective heterojunctions favored the separation and immigration of the photo-generated holes and electrons. In a reaction mechanism analysis, h⁺ and O₂^•‾ radicals were identified as the main instigators of TC photooxidation. Furthermore, the SP-derived Al₂O₃@TiO₂ microspheres demonstrated good stability and renewability in durability tests. The study provides a simple and scalable method for manufacturing Al₂O₃-decorated TiO₂ microspheres with improved adsorption and photocatalytic performance.

A designed miniature sensor for the trace level detection and degradation studies of the toxic dye Rhodamine B

The presence of organic pollutants in water and food samples is a risk for the environment. To avoid this hazard a variety of analytical tools are used for the detection of toxic organic contaminants. Herein we present a selective and sensitive electrochemical sensor based on amino group functionalized multi walled carbon nanotubes and carboxylic group functionalized multi walled carbon nanotubes (HOOC-fMWCNTs/NH2-fMWCNTs) as modifiers of the glassy carbon electrode for the detection of a toxic dye, Rhodamine B. The sensing ability of the designed sensor was examined by electrochemical impedance spectroscopy, cyclic voltammetry and square wave voltammetry. The synergistic effect of HOOC-fMWCNTs and NH2-fMWCNTs (layer by layer) led to enhanced electrocatalytic activity of the modified electrode surface for Rhodamine B detection. Under optimized conditions, the graph between concentration and peak current followed a linear trend in the concentration range of 0.1 nM to 0.05 μM. The limits of detection and quantification were found to be 57.4 pM and 191.3 pM respectively. The designed sensor was also used for probing the degradation of Rhodamine B. Sodium borohydride was found to degrade Rhodamine B in neutral media under ambient conditions. The kinetics of degradation followed first order kinetics. Rhodamine B degraded to the extent of more than 80% as revealed by electrochemical and spectrophotometric techniques. The developed method is promising for the treatment of dye contaminated wastewater. Moreover, it uses only a microliter volume of the sample for analysis.

An environmental approach for the photodegradation of toxic pollutants from wastewater using Pt-Pd nanoparticles: Antioxidant, antibacterial and lipid peroxidation inhibition applications

BACKGROUND

Green synthesis is an effective and friendly method for the environment, especially in recent years has been used in many areas. It finds application opportunities in many fields such as physics, chemistry, electronics, food, and especially health and is the subject of intensive studies in this field.

OBJECTIVES

The synthesized Pt-Pd NPs were aimed to be used as a bio-based photocatalyst under sunlight to prevent wastewater pollution. In addition, it is aimed to use Pt-Pd NPs as biological agents in different applications in the future.

METHODS

In this study, the platinum-palladium nanoparticles were synthesized by the extract of Hibiscus sabdariffa, the characterization of the nanoparticles was carried out by different methods (ultraviolet-visible spectroscopy (UV-vis), transmission electron microscopy (TEM), infrared transform spectroscopy atomic force microscopy (AFM), and ray diffraction (XRD) analysis). And we discussed several different parameters related to human health by obtaining platinum-palladium bimetallic nanoparticles (Pt-Pd NPs) with a green synthesis method. These parameters are antioxidant properties (total phenolic, flavonoid, and DPPH scavenging activity), antibacterial activity, and lipid peroxidation inhibition activity. Gallic acid was used as standard phenolic, and quercetin was used as standard flavonoid reagents. The newly synthesized Hibiscus sabdariffa mediated green synthesized Pt-Pd NPs were compared with gram-positive and gram-negative bacteria, the high antibacterial activity was shown by gram-positive bacteria. The photodegradation of Pt-Pd NPs was carried out against MB dye for 180 min.

RESULTS

TEM results show that the average size of Pt-Pd NPs is around 4.40 nm. The total amount of phenolic compounds contained in 0.2 mg/ml of Pt-Pd NPs was equivalent to 14.962 ± 7.890 μg/ml gallic acid and the total amount of flavonoid component was found to be equal to 28.9986 ± 0.204 μg/ml quercetin. Hibiscus sabdariffa mediated green synthesized Pt-Pd NPs was found to have very effective for lipid peroxidation inhibition activity in the FeCl2-H2O2 system. The maximum DPPH scavenging activity was determined as 97.35% at 200 μg/ml. The photocatalytic activity of Pt-Pd NPs was analysed against Methylene blue (MB) and the maximum degradation percentage was observed to be 83.46% at 180 min.

CONCLUSIONS

The biogenic Pt-Pd NPs showed a high effective photocatalytic and biological activity.

Plant seed extract assisted, eco-synthesized C-ZnO nanoparticles: Characterization, Chromium (VI) ion adsorption and kinetic studies

This report attempts to elucidate the potential of plant seed extract assisted synthesis of Graphite based zinc oxide nanoparticles (C-ZnO NPs) towards removal of chromium (VI) ions from the water samples. The Graphene-zinc oxide composites were characterised using TGA, XRD, FTIR and SEM. The C-ZnO nanocomposites have found to remove chromium from the sample through adsorption process. The sensitivity of chromium removal through adsorption is found to be in the range of 40-240 mg. The adsorption behaviour was found to be fitting with Langmuir isotherm model and the adsorption reaction follows pseudo second order kinetics.

Studies on Synthesis and Characterization of Fe3O4@SiO2@Ru Hybrid Magnetic Composites for Reusable Photocatalytic Application

Degradation of dye pollutants by the photocatalytic process has been regarded as the most efficient green method for removal organic dyes from contaminated water. The current research work describes the synthesis of Fe3O4@SiO2@Ru hybrid magnetic composites (HMCs) and their photocatalytic degradation of two azo dye pollutants, methyl orange (MO) and methyl red (MR), under irradiation of visible light. The synthesis of Fe3O4@SiO2@Ru HMCs involves three stages, including synthesis of Fe3O4 magnetic microspheres (MMSs), followed by silica (SiO2) coating to get Fe3O4@SiO2 MMSs, and then incorporation of presynthesized Ru nanoparticles (~3 nm) onto the surface of Fe3O4@SiO2 HMCs. The synthesized HMCs were characterized by XRD, FTIR, TEM, EDS, XPS, BET analysis, UV-DRS, PL spectroscopy, and VSM to study the physical and chemical properties. Furthermore, the narrow band gap energy of the HMC photocatalyst is a significant parameter that provides high photocatalytic properties due to the high light adsorption. The photocatalytic activity of synthesized Fe3O4@SiO2@Ru HMCs was assessed by researching their ability to degrade the aqueous solution of MO and MR dyes under visible radiation, and the influence of various functional parameters on photocatalytic degradation has also been studied. The results indicate that the photocatalytic degradation of MO and MR dyes is more than 90%, and acid media favors better degradation. The probable mechanism of photodegradation of azo dyes by Fe3O4@SiO2@Ru HMC catalysts has been proposed. Furthermore, due to the strong ferromagnetic Fe3O4 core, HMCs were easily separated from the solution after the photocatalytic degradation process for reuse. Also, the photocatalytic activity after six cycles of use is greater than 90%, suggesting the stability of the synthesized Fe3O4@SiO2@Ru HMCs.

Development of dual-functional catalysis for hydrazine oxidation by an organic p-n bilayer through in situ formation of a silver co-catalyst

Dual-functional catalysis indicates that an organic p-n bilayer induces the catalytic oxidation involved in downhill reactions, not only under illumination but also in the dark. When the organo-bilayer is composed of a perylene derivative (3,4,9,10-perylenetetracarboxylic-bis-benzimidazole (PTCBI), n-type) and cobalt phthalocyanine (CoPc, p-type), only the photocatalytic oxidation of hydrazine (N2H4) occurs. However, the loading of Ag co-catalyst onto the CoPc surface in the PTCBI/CoPc bilayer successfully led to dual catalysis in terms of the oxidation of N2H4 to N2. To develop the present dual catalysis Ag loading was essential to achieve the catalysis performance particularly without irradiation.