What is the role of acid-acid interactions in asymmetric phosphoric acid organocatalysis? A detailed mechanistic study using interlocked and non-interlocked catalysts

Helical polyisocyanide-based macroporous organic catalysts for asymmetric Michael addition with high efficiency and stereoselectivity

Porous materials have attracted interest due to their high specific surface area and rich functionality. Immobilizing organocatalysts onto porous polymers not only boosts enantioselectivity but also improves the reaction rates. In this work, a series of porous polymers C-poly-3ms with rigid polyisocyanide-carrying secondary amine pendants as building blocks were successfully prepared. And the pore size and optical activity of C-poly-3ms can be controlled by the length of the polyisocyanide blocks due to their rigid and helical backbone. C-poly-3150 demonstrated a preferred left-handed helix with a θ 364 value of -8.21 × 103. The pore size and S BET of C-poly-3150 were 17.52 nm and 7.98 m2 g-1, respectively. The porous C-poly-3150 catalyzes the asymmetric Michael addition reaction efficiently and generates the target products in satisfactory yield and excellent enantioselectivity. For 6ab, an enantiomeric excess (ee) and a diastereomeric ratio (dr) up to 99% and 99/1 could be achieved, respectively. The recovered catalyst can be recycled at least 6 times in the asymmetric Michael addition reaction while maintaining activity and stereoselectivity.

Water and Air Stable Copper(I) Complexes of Tetracationic Catenane Ligands for Oxidative C-C Cross-Coupling

Aqueous soluble and stable Cu(I) molecular catalysts featuring a catenane ligand composed of two dicationic, mutually repelling but mechanically interlocked macrocycles are reported. The ligand interlocking not only fine-tunes the coordination sphere and kinetically stabilizes the Cu(I) against air oxidation and disproportionation, but also buries the hydrophobic portions of the ligands and prevents their dissociation which are necessary for their good water solubility and a sustained activity. These catenane Cu(I) complexes can catalyze the oxidative C-C coupling of indoles and tetrahydroisoquinolines in water, using H2O2 as a green oxidant with a good substrate scope. The successful use of catenane ligands in exploiting aqueous Cu(I) catalysis thus highlights the many unexplored potential of mechanical bond as a design element for exploring transition metal catalysis under challenging conditions.

Highly acidic N-triflylphosphoramides as chiral Brønsted acid catalysts: the effect of weak hydrogen bonds and multiple acceptors on complex structures and aggregation

N-Triflylphosphoramides (NTPAs) represent an important catalyst class in asymmetric catalysis due to their multiple hydrogen bond acceptor sites and acidity, which is increased by several orders of magnitude compared to conventional chiral phosphoric acids (CPAs). Thus, NTPAs allow for several challenging transformations, which are not accessible with CPAs. However, detailed evidence on their hydrogen bonding situation, complex structures and aggregation is still lacking. Therefore, this study covers the hydrogen bonding behavior and structural features of binary NTPA/imine complexes compared to their CPA counterparts. Deviating from the single-well potential hydrogen bonds commonly observed in CPA/imine complexes, the NTPA/imine complexes exhibit a tautomeric equilibrium between two proton positions. Low-temperature NMR at 180 K supported by computer simulations indicates a OHN hydrogen bond between the phosphoramide oxygen and the imine, instead of the mostly proposed NHN H-bond. Furthermore, this study finds no evidence for the existence of dimeric NTPA/NTPA/imine complexes as previously suggested for CPA systems, both synthetically and through NMR studies.

Advancements and strategic approaches in catenane synthesis

Catenanes, a distinctive category of mechanically interlocked molecules composed of intertwined macrocycles, have undergone significant advancements since their initial stages characterized by inefficient statistical synthesis methods. Through the aid of molecular recognition processes and principles of self-assembly, a diverse array of catenanes with intricate structures can now be readily accessed utilizing template-directed synthetic protocols. The rapid evolution and emergence of this field have catalyzed the design and construction of artificial molecular switches and machines, leading to the development of increasingly integrated functional systems and materials. This review endeavors to explore the pivotal advancements in catenane synthesis from its inception, offering a comprehensive discussion of the synthetic methodologies employed in recent years. By elucidating the progress made in synthetic approaches to catenanes, our aim is to provide a clearer understanding of the future challenges in further advancing catenane chemistry from a synthetic perspective.

Heterobifunctional rotaxanes featuring two chiral subunits - synthesis and application in asymmetric organocatalysis

Rotaxanes can serve as scaffolds for the generation of bifunctional catalysts. We have now generated acid-base functionalized rotaxanes featuring two chiral subunits. The mechanical bond leads to increased reaction rates and also to strongly altered enantioselectivites in comparison to the non-interlocked control catalysts.

Quantifying Intermolecular Interactions in Asymmetric Peptide Organocatalysis as a Key toward Understanding Selectivity

The kinetic resolution of trans-cyclohexane-1,2-diol with a lipophilic oligopeptide catalyst shows extraordinary selectivities. To improve our understanding of the factors governing selectivity, we quantified the Gibbs free energies of interactions of the peptide with both enantiomers of trans-cyclohexane-1,2-diol using nuclear magnetic resonance (NMR) spectroscopy. For this, we use advanced methods such as transverse relaxation (R2), diffusion measurements, saturation transfer difference (STD), and chemical shift (δ) analysis of peptide-diol mixtures upon varying their composition (NMR titrations). The methods employed give comparable and consistent results. The molecular recognition by the catalyst is approximately 3 kJ mol-1 in favor of the preferentially acetylated (R,R)-enantiomer in the temperature range studied. Interestingly, the difference of 3 kJ mol-1 is also confirmed by results from reaction monitoring of the acylation step under catalytic conditions, indicating that this finding is true regardless of whether the investigation is performed on the acetylated species or on the free catalyst. To arrive at these conclusions, the self-association of both the catalyst and the substrate in toluene was found to play an important role and thus needs to be taken into account in reaction screening.

Dimerization of confined Brønsted acids in enantioselective organocatalytic reactions

The formation of Brønsted acid aggregates in the course of asymmetric organocatalytic reactions is often overlooked in mechanistic studies, even though it might have a deep impact on the stereo-controlling factors of the transformations. In this work, we shed light on the influence of the catalyst structure and reaction conditions on the spontaneity of the aggregation process for popular chiral organocatalysts derived from phosphoric acids using high-level quantum mechanical calculations. Our study encompasses small and sterically unhindered chiral phosphoric acids as well as large and "confined" imidodiphosphates and imidodiphosphorimidates. These systems have recently proven particularly effective in promoting a large number of highly relevant asymmetric transformations. While cooperative catalytic effects of sterically less hindered chiral phosphoric acid catalysts are well appreciated in literature, it is found that the formation of catalyst dimers in solution is possible for both standard and confined catalysts. The spontaneity of the aggregation process depends on reaction conditions like solvent polarity, polarizability, temperature, the nature of the interaction with the substrate, as well as the catalyst architecture. Finally, it is shown that, at low temperatures (153 K), the aggregation process can profoundly influence the reaction kinetics and selectivity.

A Brief Introduction to Chemical Reaction Optimization

From the start of a synthetic chemist's training, experiments are conducted based on recipes from textbooks and manuscripts that achieve clean reaction outcomes, allowing the scientist to develop practical skills and some chemical intuition. This procedure is often kept long into a researcher's career, as new recipes are developed based on similar reaction protocols, and intuition-guided deviations are conducted through learning from failed experiments. However, when attempting to understand chemical systems of interest, it has been shown that model-based, algorithm-based, and miniaturized high-throughput techniques outperform human chemical intuition and achieve reaction optimization in a much more time- and material-efficient manner; this is covered in detail in this paper. As many synthetic chemists are not exposed to these techniques in undergraduate teaching, this leads to a disproportionate number of scientists that wish to optimize their reactions but are unable to use these methodologies or are simply unaware of their existence. This review highlights the basics, and the cutting-edge, of modern chemical reaction optimization as well as its relation to process scale-up and can thereby serve as a reference for inspired scientists for each of these techniques, detailing several of their respective applications.

Multifunctional Organocatalysts - Singly-Linked and Macrocyclic Bisphosphoric Acids for Asymmetric Phase-Transfer and Brønsted-Acid Catalysis

The linking of phosphoric acids via covalent or mechanical bonds has proven to be a successful strategy for the design of novel organocatalysts. Here, we present the first systematic investigation of singly-linked and macrocyclic bisphosphoric acids, including their synthesis and their application in phase-transfer and Brønsted acid catalysis. We found that the novel bisphosphoric acids show dramatically increased enantioselectivities in comparison to their monophosphoric acid analogues. However, the nature, length and number of linkers has a profound influence on the enantioselectivities. In the asymmetric dearomative fluorination via phase-transfer catalysis, bisphosphoric acids with a single, rigid bisalkyne-linker give the best results with moderate to good enantiomeric excesses. In contrast, bisphosphoric acids with flexible linkers give excellent enantioselectivities in the transfer-hydrogenation of quinolines via cooperative Brønsted acid catalysis. In the latter case, sufficiently long linkers are needed for high stereoselectivities, as found experimentally and supported by DFT calculations.

Bidentate substrate binding in Brønsted acid catalysis: structural space, hydrogen bonding and dimerization

BINOL derived chiral phosphoric acids (CPAs) are a prominent class of catalysts in the field of asymmetric organocatalysis, capable of transforming a wide selection of substrates with high stereoselectivities. Exploiting the Brønsted acidic and basic dual functionality of CPAs, substrates with both a hydrogen bond acceptor and donor functionality are frequently used as the resulting bidentate binding via two hydrogen bonds is expected to strongly confine the possible structural space and thus yield high stereoselectivities. Despite the huge success of CPAs and the popularity of a bidentate binding motif, experimental insights into their organization and origin of stereoinduction are scarce. Therefore, in this work the structural space and hydrogen bonding of CPAs and N-(ortho-hydroxyaryl) imines (19 CPA/imine combinations) was elucidated by low temperature NMR studies and corroborated by computations. The postulated bidentate binding of catalyst and substrate by two hydrogen bonds was experimentally validated by detection of trans-hydrogen bond scalar couplings. Counterintuitively, the resulting CPA/imine complexes showed a broad potential structural space and a strong preference towards the formation of [CPA/imine]₂ dimers. Molecular dynamics simulations showed that in these dimers, the imines form each one hydrogen bond to two CPA molecules, effectively bridging them. By finetuning steric repulsion and noncovalent interactions, rigid and well-defined CPA/imine monomers could be obtained. NOESY studies corroborated by theoretical calculations revealed the structure of that complex, in which the imine is located in between the 3,3'-substituents of the catalyst and one site of the substrate is shielded by the catalyst, pinpointing the origin or stereoselectivity for downstream transformations.

Tilting the Balance: London Dispersion Systematically Enhances Enantioselectivities in Brønsted Acid Catalyzed Transfer Hydrogenation of Imines

London dispersion (LD) is attracting more and more attention in catalysis since LD is ubiquitously present and cumulative. Since dispersion is hard to grasp, recent research has concentrated mainly on the effect of LD in individual catalytic complexes or on the impact of dispersion energy donors (DEDs) on balance systems. The systematic transfer of LD effects onto confined and more complex systems in catalysis is still in its infancy, and no general approach for using DED residues in catalysis has emerged so far. Thus, on the example of asymmetric Brønsted acid catalyzed transfer hydrogenation of imines, we translated the findings of previously isolated balance systems onto confined catalytic intermediates, resulting in a systematic enhancement of stereoselectivity when employing DED-substituted substrates. As the imine substrate is present as Z- and E-isomers, which can, respectively, be converted to R- and S-product enantiomers, implementing tert-butyl groups as DED residues led to an additional stabilization of the Z-imine by up to 4.5 kJ/mol. NMR studies revealed that this effect is transferred onto catalyst/imine and catalyst/imine/nucleophile intermediates and that the underlying reaction mechanism is not affected. A clear correlation between ee and LD stabilization was demonstrated for 3 substrates and 10 catalysts, allowing to convert moderate-good to good-excellent enantioselectivities. Our findings conceptualize a general approach on how to beneficially employ DED residues in catalysis: they clearly showcase that bulky alkyl residues such as tert-butyl groups must be considered regarding not only their repulsive steric bulk but also their attractive properties even in catalytic complexes.

BINOL as a chiral element in mechanically interlocked molecules

In this minireview we present the use of the axially chiral 1,1'-binaphthyl-2,2'-diol (BINOL) unit as a stereogenic element in mechanically interlocked molecules (MIMs). We describe the synthesis and properties of such BINOL-based chiral MIMs, together with their use in further diastereoselective modifications, their application in asymmetric catalysis, and their use in stereoselective chemosensing. Given the growing importance of mechanically interlocked molecules and the key advantages of the privileged chiral BINOL backbone, we believe that this research area will continue to grow and deliver many useful applications in the future.

Distinctive features and challenges in catenane chemistry

From being an aesthetic molecular object to a building block for the construction of molecular machines, catenanes and related mechanically interlocked molecules (MIMs) continue to attract immense interest in many research areas. Catenane chemistry is closely tied to that of rotaxanes and knots, and involves concepts like mechanical bonds, chemical topology and co-conformation that are unique to these molecules. Yet, because of their different topological structures and mechanical bond properties, there are some fundamental differences between the chemistry of catenanes and that of rotaxanes and knots although the boundary is sometimes blurred. Clearly distinguishing these differences, in aspects of bonding, structure, synthesis and properties, between catenanes and other MIMs is therefore of fundamental importance to understand their chemistry and explore the new opportunities from mechanical bonds.

Controlling catalyst activity, chemoselectivity and stereoselectivity with the mechanical bond

Mechanically interlocked molecules, such as rotaxanes and catenanes, are receiving increased attention as scaffolds for the development of new catalysts, driven by both their increasing accessibility and high-profile examples of the mechanical bond delivering desirable behaviours and properties. In this Review, we survey recent advances in the catalytic applications of mechanically interlocked molecules organized by the effect of the mechanical bond on key catalytic properties, namely, activity, chemoselectivity and stereoselectivity, and focus on how the mechanically bonded structure leads to the observed behaviour. Our aim is to inspire future investigations of mechanically interlocked catalysts, including those outside of the supramolecular community.

Association Equilibria of Organo-Phosphoric Acids with Imines from a Combined Dielectric and Nuclear Magnetic Resonance Spectroscopy Approach

Aggregates formed between organo-phosphoric acids and imine bases in aprotic solvents are the reactive intermediates in Brønsted acid organo-catalysis. Due to the strong hydrogen-bonding interaction of the acids in solution, multiple homo- and heteroaggregates are formed with profound effects on catalytic activity. Yet, due to the similar binding motifs-hydrogen-bonds-it is challenging to experimentally quantify the abundance of these aggregates in solution. Here we demonstrate that a combination of nuclear magnetic resonance (NMR) and dielectric relaxation spectroscopy (DRS) allows for accurate speciation of these aggregates in solution. We show that only by using the observables of both experiments heteroaggregates can be discriminated with simultaneously taking homoaggregation into account. Comparison of the association of diphenyl phosphoric acid and quinaldine or phenylquinaline in chloroform, dichloromethane, or tetrahydrofuran suggests that the basicity of the base largely determines the association of one acid and one base molecule to form an ion-pair. We find the ion-pair formation constants to be highest in chloroform, slightly lower in dichloromethane and lowest in tetrahydrofuran, which indicates that the hydrogen-bonding ability of the solvent also alters ion-pairing equilibria. We find evidence for the formation of multimers, consisting of one imine base and multiple diphenyl phosphoric acid molecules for both bases in all three solvents. This subsequent association of an acid to an ion-pair is however little affected by the nature of the base or the solvent. As such our findings provide routes to enhance the overall fraction of these multimers in solution, which have been reported to open new catalytic pathways.

Functional Rotaxanes in Catalysis

Mechanically interlocked molecules (MIMs) have gained attention in the field of catalysis due to their unique molecular properties. Central to MIMs, rotaxanes are highly promising and attractive supramolecular catalysts due to their unique three-dimensional structures and the flexibility of their subcomponents. This Minireview discusses the use of rotaxanes in organocatalysis and transition-metal catalysis.

Enantioselective synthesis of chiral tetrasubstituted allenes: harnessing electrostatic and noncovalent interactions in a bifunctional activation model for N-triflylphosphoramide catalysis

DFT calculation reveals that the oxygen activation model is preferred than the nitrogen activation model due to the preferred chiral electrostatic environment.

Mechanical bonding activation in rotaxane-based organocatalysts

Interlocked organocatalysts show enhanced catalytic performance when compared with their non-interlocked threads.The ring cooperatively activates the substrates, facilitating the formation and stabilization of catalytically active intermediates.

Insight into the organocatalytic arylation of azonaphthalenes with α-chloroaldehydes: the general mechanism and origin of selectivities

The mechanism and origin of selectivities of NHC-catalyzed arylation of azonaphthalenes with α-chloroaldehydes have been theoretically studied for the first time.

Theoretical model for N-heterocyclic carbene-catalyzed decarboxylation reactions

A general mechanism for N-heterocyclic carbene-catalyzed decarboxylation reactions has been studied using DFT calculations.

Electric field effect on 31P NMR magnetic shielding

Magnetic shielding depends on molecular structure and noncovalent interactions. This study shows that it is also measurably dependent on the electric field generated by surrounding molecules. This effect has been observed explicitly for ³¹P nucleus using the adduct under field approach. The results obtained indicate that the field strength experienced by molecules in crystals consisting of molecules with large dipole moments is similar to that in polar solvents. Therefore, magnetic shielding should explicitly depend on solvent polarity. It is important to note that this effect cannot be reproduced correctly within the polarizable continuum model approach.

Mechanism and origins of selectivity in the enantioselective oxa-Pictet-Spengler reaction: a cooperative catalytic complex from a hydrogen bond donor and chiral phosphoric acid

Enantioselective additions to oxocarbenium ions are high-value synthetic transformations but have proven challenging to achieve. In particular, the oxa-Pictet-Spengler reaction has only recently been rendered enantioselective. We report experimental and computational studies on the mechanism of this unusual transformation. Herein we reveal that this reaction is hypothesized to proceed through a self-assembled ternary hydrogen bonding complex involving the substrate, chiral phosphate ion, and a urea hydrogen-bond donor. The computed transition state reveals C2-symmetric grooves in the chiral phosphate that are occupied by the urea and substrate. Occupation of one of these grooves by the urea co-catalyst tunes the available reactive volume and enhances the stereoselectivity of the chiral phosphate catalyst.

Functionalized Macrocycles in Supramolecular Organocatalysis

Supramolecular organocatalysis has emerged as a novel research field in the context of homogeneous catalysis. In particular, the use of functionalized macrocycles as supramolecular catalysts is highly promising, as these systems are oftentimes easily accessible and offer distinct advantages in catalysis. Macrocyclic catalysts can provide defined binding pockets, such as hydrophobic cavities, and can thus create a reaction microenvironment for catalysis. In addition, macrocycles can offer a preorganized arrangement of functional groups, such as binding sites or catalytically active groups, thus enabling a defined and possibly multivalent binding and activation of substrates. The aim of this Minireview is to provide an overview of recent advances in the area of supramolecular organocatalysis based on functionalized macrocycles (including cyclodextrins, calixarenes, and resorcinarenes), with a focus on those examples where certain catalytically active groups (such as hydrogen bond donors/acceptors, Brønsted acid or base groups, or nucleophilic units) are present in or have been installed on the macrocycles.