Heavy chalcogenide-transition metal clusters as coordination polymer nodes

Polymorphism of Two-Dimensional Semiconducting Coordination Polymers: Impact of a Lead-Sulfur Network on Photoconductivity

Sulfur-coordinated coordination polymers (S-CPs) have unique optoelectrical properties that originate from infinite M-S bond networks. In this study, we synthesized and characterized two polymorphs of a two-dimensional (2D) Pb(II) S-CP with a formula of [Pb(tzdt)(OAc)] (Htzdt=1,3-thiazolidine-2-thione, OAc=acetate). Our findings revealed that the thermodynamic product (KGF-26) possesses quasi-2D (-Pb-S-)n layers with weak nonbonded Pb-S bonds, whereas the kinetic product (KGF-27) has intrinsic 2D (-Pb-S-)n layers with Pb-S bonds. The results of time-resolved microwave conductivity measurements and first-principles calculations confirmed that KGF-27 exhibits higher photoconductivity than KGF-26, which establishes that the inorganic (-Pb-S-)n networks with Pb-S bonds are crucial for achieving high photoconductivity. This is the first experimental demonstration of the impact of the (-M-S-)n networks in S-CPs on photoconductivity through the comparison of crystal polymorphisms.

Inorganic-organic hybrid Cu-dipyridyl semiconducting polymers based on the redox-active cluster [SFe3(CO)9]2-: filling the gap in iron carbonyl chalcogenide polymers

The construction of sulfur-incorporated cluster-based coordination polymers was limited and underexplored due to the lack of efficient synthetic routes. Herein, we report facile mechanochemical ways toward a new series of SFe3(CO)9-based dipyridyl-Cu polymers by three-component reactions of [Et4N]2[SFe3(CO)9] ([Et4N]2[1]) and [Cu(MeCN)4][BF4] with conjugated or conjugation-interrupted dipyridyl ligands, 1,2-bis(4-pyridyl)ethylene (bpee), 1,2-bis(4-pyridyl)ethane (bpea), 4,4'-dipyridyl (dpy), or 1,3-bis(4-pyridyl)propane (bpp), respectively. X-ray analysis showed that bpee-containing 2D polymers demonstrated unique SFe3(CO)9 cluster-armed and cluster-one-armed coordination modes via the hypervalent μ5-S atom. These S-Fe-Cu polymers could undergo flexible structural transformations with the change of cluster bonding modes by grinding with stoichiometric amounts of dipyridyls or 1/[Cu(MeCN)4]+. They exhibited semiconducting behaviors with low energy gaps of 1.55-1.79 eV and good electrical conductivities of 3.26 × 10-8-1.48 × 10-6 S cm-1, tuned by the SFe3(CO)9 cluster bonding modes accompanied by secondary interactions in the solid state. The electron transport efficiency of these polymers was further elucidated by solid-state packing, X-ray photoelectron spectroscopy (XPS), X-ray absorption near-edge spectroscopy (XANES), density of states (DOS), and crystal orbital Hamilton population (COHP) analysis. Finally, the solid-state electrochemistry of these polymers demonstrated redox-active behaviors with cathodically-shifted patterns compared to that of [Et4N]2[1], showing that their efficient electron communication was effectively enhanced by introducing 1 and dipyridyls as hybrid ligands into Cu+-containing networks.

Thiomolybdate Clusters: From Homogeneous Catalysis to Heterogenization and Active Sites

Thiomolybdates are molecular molybdenum-sulfide clusters formed from Mo centers and sulfur-based ligands. For decades, they have attracted the interest of synthetic chemists due to their unique structures and their relevance in biological systems, e.g., as reactive sites in enzymes. More recently, thiomolybdates are explored from the catalytic point of view and applied as homogeneous and molecular mimics of heterogeneous molybdenum sulfide catalysts. This review summarizes prominent examples of thiomolybdate-based electro- and photocatalysis and provides a comprehensive analysis of their reactivities under homogeneous and heterogenized conditions. Active sites of thiomolybdates relevant for the hydrogen evolution reaction are examined, aiming to shed light on the link between cluster structure and performance. The shift from solution-phase to surface-supported thiomolybdates is discussed with a focus on applications in electrocatalysis and photocatalysis. The outlook highlights current trends and emerging areas of thiomolybdate research, ending with a summary of challenges and key takeaway messages based on the state-of-the-art research.

Engineering of CdS-chain arrays assembled through S⋯S interactions in 1D semiconductive coordination polymers

One-dimensional (1D) Cd(II) coordination polymers [Cd(x-SPhOMe)2]n (x = ortho, meta, and para; HSPhOMe = methoxybenzenethiol) containing inorganic 1D (-Cd-S-)n chains were synthesized. Among these, the KGF-31 polymer bearing para-SPhOMe featured a three-strand chain structure assembled via interchain S⋯S interactions and exhibited high photoconductivity and longevity.

Electrically conductive [Fe4S4]-based organometallic polymers

Tailoring the molecular components of hybrid organic-inorganic materials enables precise control over their electronic properties. Designing electrically conductive coordination materials, e.g. metal-organic frameworks (MOFs), has relied on single-metal nodes because the metal-oxo clusters present in the vast majority of MOFs are not suitable for electrical conduction due to their localized electron orbitals. Therefore, the development of metal-cluster nodes with delocalized bonding would greatly expand the structural and electrochemical tunability of conductive materials. Whereas the cuboidal [Fe4S4] cluster is a ubiquitous cofactor for electron transport in biological systems, few electrically conductive artificial materials employ the [Fe4S4] cluster as a building unit due to the lack of suitable bridging linkers. In this work, we bridge the [Fe4S4] clusters with ditopic N-heterocyclic carbene (NHC) linkers through charge-delocalized Fe-C bonds that enhance electronic communication between the clusters. [Fe4S4Cl2(ditopic NHC)] exhibits a high electrical conductivity of 1 mS cm-1 at 25 °C, surpassing the conductivity of related but less covalent materials. These results highlight that synthetic control over individual bonds is critical to the design of long-range behavior in semiconductors.

Tetrathiafulvalene-2,3,6,7-tetrathiolate linker redox-state elucidation via S K-edge X-ray absorption spectroscopy

Sulfur K-edge XAS data provide a unique tool to examine oxidation states and covalency in electronically complex S-based ligands. We present sulfur K-edge X-ray absorption spectroscopy on a discrete redox-series of Ni-based tetrathiafulvalene tetrathiolate (TTFtt) complexes as well as on a 1D coordination polymer (CP), NiTTFtt. Experiment and theory suggest that Ni-S covalency decreases with oxidation which has implications for charge transport pathways.

MOF-derived bimetallic coordination polymer@cobalt-aluminum layered double hydroxide for highly selective CO2 adsorption: Experiments, mechanisms

Selective capture of CO₂ is one of the most effective strategies for combating the greenhouse effect. In this study, we report the synthesis of a novel adsorbent-an amine-based cobalt-aluminum layered hydroxide with a hafnium/titanium metal coordination polymer (denoted as Co-Al-LDH@Hf/Ti-MCP-AS)-through the derivatization of metal-organic frameworks (MOFs) for selective CO₂ adsorption and separation. Co-Al-LDH@Hf/Ti-MCP-AS achieved the maximum CO₂ adsorption capacity of 2.57 mmol g^-1 at 25 °C and 0.1 MPa. The adsorption behavior followed the pseudo-second-order kinetics and Freundlich isotherm models, indicating that chemisorption occurs on a non-homogeneous surface. Co-Al-LDH@Hf/Ti-MCP-AS also exhibited selective CO₂ adsorption in CO₂/N₂ and excellent stability over six adsorption-desorption cycles. An in-depth analysis of the adsorption mechanism through X-ray photoelectron spectroscopy and density-functional theory and frontier molecular orbital calculations revealed that adsorption occurs through acid-base interactions between amine functional groups and CO₂ and that the tertiary amines (N3) have the highest affinity toward CO₂. Our study provides a novel strategy for designing high-performance adsorbents for CO₂ adsorption and separation.

Sequential Assembly and Stabilization of Cu6S6 Octahedral Clusters in NaCl-, NiAs-, and CdI2-Related Structures and Their Utility toward Thermochromism and Multicomponent Hantzsch Reaction

Seven new inorganic-organic coordination polymer compounds have been synthesized and their structures are determined by single-crystal structure determination. The compounds were prepared by the sequential assembly of a [Cu₆(mna)₆]^6- moiety in the presence of a Mn salt and a secondary amine ligand. Of the seven compounds, [{Cu₆(mna)₆}Mn₃(H₂O)(H₂O)_1.5]·5.5H₂O (I), [{Cu₆(mna)₆}Mn₃(H₂O)(Im)_1.5]·3.5H₂O (Ia), [{Cu₆(mna)₆}{Mn(BPY)(H₂O)}₂{Mn(H₂O)₄}]·2H₂O (III), and [{Cu₆(mna)₆}{Mn(BPE)_0.5(H₂O)₂}₂{Mn(BPE)(H₂O)₂}] (IV) have a three-dimensional structure, whereas [{Cu₆(mna)_4.5(Hmna)_1.5}{Mn(BPA)(H₂O)₂}{Mn(H₂O)}]{Mn_0.25(H₂O)₃}·7H₂O (II), [{Cu₆(mna)₆}{Mn(4-BPDB)_0.5H₂O}{Mn(H₂O)₂}].{Mn(H₂O)₆}·6H₂O (V), and [{Cu₆(mna)₄(Hmna)₂}·{Mn(H₂O)₃}₂]·(4-APY)₂·6H₂O (VI) have a two-dimensional structure. Some of the prepared compounds exhibit structures that closely resemble the classical inorganic structures, such as NaCl (Ia, III), NiAs (I), and CdI₂ (IV and VI). The stabilization of such simple structures from the assembly of octahedral Cu₆S₆ clusters and different Mn species and aromatic nitrogen-containing ligands suggests the subtle interplay between the constituent reactants. The compounds were examined for the multicomponent Hantzsch reaction, which gave the product in good yields. The compounds, II and VI, on heating to 70 °C change color reversibly from pale yellow to deep red, which suggests the possible use of these compounds as thermochromic materials. The present study suggests that the Cu₆S₆ octahedral clusters can be assembled into structures that resemble classical inorganic structures.

Nickel(II) Cluster-Based Pillar-Layered Metal-Organic Frameworks for High-Performance Supercapacitors

Most metal-organic frameworks (MOFs) cannot be used as electrode materials for supercapacitors because of their high costs, poor stabilities in aqueous solutions, inferior intrinsic electrocatalytic activities, and poor conductivities. Herein, the application of two nickel(II) cluster-based pillar-layered MOFs, Ni-mba-Na ([Ni₈(mba)₆(Cl)₂Na(OH^-)₃]_n, H₂mba is 2-mercaptobenzoic acid) and Ni-mba-K ([Ni₈(mba)₆(Cl)₂K(OH^-)₃]_n), as electrode materials are reported. They differ from conductive MOFs because they are insulators with small specific surface areas (<10 m² g^-1), and H²mba is an inexpensive raw material. The conductivities of Ni-mba-Na and Ni-mba-K at 30 °C were 4.002 × 10^-10 and >10^-11 S cm^-1, respectively. They showed excellent supercapacitor performance and stabilities and high inherent densities and specific capacitances. The specific powers of their asymmetric supercapacitors could reach up to 16,000 W kg^-1; the specific energies of Ni-mba-Na and Ni-mba-K were 16.9 and 21.8 Wh kg^-1, respectively. Design recommendations for these MOFs are provided based on their structure and performance differences. This paper shows a novel application of nonconductive MOFs in the energy storage field and design of high-performance electrode materials for supercapacitors.

A review on functional nanoarchitectonics nanocomposites based on octahedral metal atom clusters (Nb6, Mo6, Ta6, W6, Re6): inorganic 0D and 2D powders and films

This review is dedicated to various functional nanoarchitectonic nanocomposites based on molecular octahedral metal atom clusters (Nb₆, Mo₆, Ta₆, W₆, Re₆). Powder and film nanocomposites with two-dimensional, one-dimensional and zero-dimensional morphologies are presented, as well as film matrices from organic polymers to inorganic layered oxides. The high potential and synergetic effects of these nanocomposites for biotechnology applications, photovoltaic, solar control, catalytic, photonic and sensor applications are demonstrated. This review also provides a basic level of understanding how nanocomposites are characterized and processed using different techniques and methods. The main objective of this review would be to provide guiding significance for the design of new high-performance nanocomposites based on transition metal atom clusters.

Epitaxial coordination assembly of a semi-conductive silver-chalcogenide layer-based MOF

Using a carboxylic acid linker, this work achieved the epitaxially coordinated assembly of a Ag-S layer into a three-dimensional semi-conductive framework, with high thermal stability, as well as an interesting temperature-dependent luminescence response. This work provides a new avenue to prepare semi-conductive metal-chalcogenide layer-based materials in electricity-related applications.

Bottom-up synthesis strategy of a two-dimensional {Fe5} cluster-based coordination polymer: stepwise formation of a {Fe5} cluster and its dimension augmentation

A 2D cluster-based coordination polymer of {Fe5}-2D was developed by hierarchical dimension augmentation from its 1D coordination polymer of {Fe5}-1D and discrete 0D cluster of {Fe5}-0D. And a possible bottom-up synthesis mechanism was proposed.

Controlling Ligand Coordination Spheres and Cluster Fusion in Superatoms

We show that reaction pathways from a single superatom motif can be controlled through subtle electronic modification of the outer ligand spheres. Chevrel-type [Co₆Se₈L₆] (L = PR₃, CO) superatoms are used to form carbene-terminated clusters, the reactivity of which can be influenced through the electronic effects of the surrounding ligands. This carbene provides new routes for ligand substitution chemistry, which is used to selectively install cyanide or pyridine ligands which were previously inaccessible in these cobalt-based clusters. The surrounding ligands also impact the ability of this carbene to create larger fused clusters of the type [Co₁₂Se₁₆L₁₀], providing underlying information for cluster fusion mechanisms. We use this information to develop methods of creating dimeric clusters with functionalized surface ligands with site specificity, putting new ligands in specific positions on this anisotropic core. Finally, adjusting the carbene intermediates can also be used to perturb the geometry of the [Co₆Se₈] core itself, as we demonstrate with a multicarbene adduct that displays a substantially anisotropic core. These additional levels of synthetic control could prove instrumental for using superatomic clusters for many applications including catalysis, electronic devices, and creating novel extended structures.

Approach toward Iron(II) Coordination Polymers Based on Chain Motifs with Thiolate or Mixed Thiolate/Carboxylate Bridges: Structures and Magnetic Properties

The search for iron-sulfur-based coordination polymers (CPs) has become an attractive field in recent years. Here we demonstrate how it is possible to synthesize new iron-sulfur-based CPs by solvothermal reactions of [CpFe(CO)₂]₂ (Cp = cyclopentadienyl) with two positional isomeric ligands 6-mercaptonicotinic acid (6-H₂mna) and 2-mercaptoisonicotinic acid (2-H₂mina) in different mixed-solvent systems. The reactions afforded, in moderate yields, a variety of desired CPs, namely, [Fe(6-Hmna)₂] (1), [Fe₃(6-Hmna)₂(6-mna)₂] (2), [Fe₂(6-mna)₂]·H₂O (3), and [Fe(2 mina)(H₂O)] (4 and 5). The structures of these compounds have been characterized by single-crystal X-ray diffraction, which reveals that they all contain 1D chain motifs of iron held together in different ways by thiolate or mixed thiolate/carboxylate bridges. These chains are further connected through the ligand backbones to form 3D networks of 1-3 and 5 and a 2D sheet of 4. Moreover, magnetic investigations indicate that both 1 and 4 display canted antiferromagnetic behavior with weak ferromagnetism, while 2 and 5 possess short-range antiferromagnetic order at ∼20 K. CP 3 exhibits paramagnetic behavior down to 2 K with strong spin frustration.

Structure-Property Relationships of Inorganic-Organic Hybrid Semiconducting Se-Fe-Cu-CO Polymers

A novel family of inorganic-organic-hybrid SeFe₃(CO)₉-dipyridyl two- and one-dimensional Cu polymers was synthesized via the three-component liquid-assisted grinding (LAG) of [Cu(MeCN)₄]⁺, inorganic cluster [SeFe₃(CO)₉]^2- (1), and rigid conjugated dipyridyls 4,4'-dipyridyl (dpy) and 1,2-bis(4-pyridyl)ethylene (bpee) or flexible conjugation-interrupted dipyridyls 1,2-bis(4-pyridyl)ethane (bpea) and 1,3-bis(4-pyridyl)propane (bpp). They included a cluster-linked 2D polymer, [(μ₄-Se)Fe₃(CO)₉Cu₂(MeCN)(dpy)_1.5]_n (1-dpy-2D), a cluster-pendant 1D chain, [(μ₃-Se)Fe₃(CO)₉Cu₂(dpy)₃]_n (1-dpy-1D), cluster-blocked 1D polymers, [(μ₃-Se)Fe₃(CO)₉Cu₂(L)]_n (1-L-1D, L = bpee, bpea), and a cluster-linked 2D polymer, [(μ₄-Se)Fe₃(CO)₉Cu₂(bpp)₂]_n (1-bpp-2D). The reversible dimensionality transformations of these three types of polymers accompanied by the change in coordination modes of 1 were achieved by the LAG addition of 1/[Cu(MeCN)₄]⁺ or dipyridyl ligands. These polymers were found to possess tunable low-energy gaps (1.49-1.72 eV) that increased in the order regarding their structural features: cluster-linked 1-dpy-2D and 1-bpp-2D, cluster-blocked 1-bpea-1D and 1-bpee-1D, and cluster-pendant 1-dpy-1D and [(μ₃-Se)Fe₃(CO)₉Cu₂(L)_2.5]_n (L = bpee, 1-bpee-2D; bpea, 1-bpea-2D), indicative of the importance of the participation of cluster 1. The measured electrical conductivities of 1-bpp-2D, 1-bpea-1D, and 1-dpy-1D were 3.13 × 10^-7, 2.92 × 10^-7, and 2.30 × 10^-7 S·cm^-1, respectively, which were parallel for the trend in their energy gaps, revealing semiconducting behaviors, supported by XPS, XANES, and DFT calculations. The surprising semiconductivity of the conjugation-interrupted bpp-linked 1-bpp-2D was mainly ascribed to electron transport via C-H···O(carbonyl) hydrogen bonds and aromatic C-H···π contacts within its closely packed 2D layers. Water-/light-stable polymers 1-bpp-2D, 1-bpea-2D, and 1-dpy-1D were also demonstrated to exhibit excellent pseudo-first-order photodegradation toward nitroaromatics and organic dyes, where cluster-linked polymer 1-bpp-2D performed the best, as predicted by its structural features and narrow energy gap.

Mixed-Metal Cu-Zn Thiocyanate Coordination Polymers with Melting Behavior, Glass Transition, and Tunable Electronic Properties

The solid-state mechanochemical reactions under ambient conditions of CuSCN and Zn(SCN)₂ resulted in two novel materials: partially Zn-substituted α-CuSCN and a new phase Cu_xZn_y(SCN)_x+2y. The reactions take place at the labile S-terminal, and both products show melting and glass transition behaviors. The optical band gap and solid-state ionization potential can be adjusted systematically by adjusting the Cu/Zn ratio. Density functional theory calculations also reveal that the Zn-substituted CuSCN structure features a complementary electronic structure of Cu 3d states at the valence band maximum and Zn 4s states at the conduction band minimum. This work shows a new route to develop semiconductors based on coordination polymers, which are becoming technologically relevant for electronic and optoelectronic applications.

Machine-Learning-Assisted Selective Synthesis of a Semiconductive Silver Thiolate Coordination Polymer with Segregated Paths for Holes and Electrons

Coordination polymers (CPs) with infinite metal-sulfur bond networks have unique electrical conductivities and optical properties. However, the development of new (-M-S-)_n -structured CPs is hindered by difficulties with their crystallization. Herein, we describe the use of machine learning to optimize the synthesis of trithiocyanuric acid (H₃ ttc)-based semiconductive CPs with infinite Ag-S bond networks, report three CP crystal structures, and reveal that isomer selectivity is mainly determined by proton concentration in the reaction medium. One of the CPs, [Ag₂ Httc]_n , features a 3D-extended infinite Ag-S bond network with 1D columns of stacked triazine rings, which, according to first-principle calculations, provide separate paths for holes and electrons. Time-resolved microwave conductivity experiments show that [Ag₂ Httc]_n is highly photoconductive (φΣμ_max =1.6×10^-4  cm²  V^-1  s^-1 ). Thus, our method promotes the discovery of novel CPs with selective topologies that are difficult to crystallize.

Redox-Active Tin Metal-Organic Framework with a Thiolate-Based Ligand

Metal-organic frameworks (MOFs) and coordination polymers composed of thiolates as coordinating functional groups are interesting materials with unique optical and electronical properties. Herein, we report the preparation of KGF-4 and KGF-10, two Sn-MOF crystal structures with bonds between Sn and thiolate. KGF-10 was isolated as a pure phase and found to exhibit redox properties and a semiconducting band structure, as confirmed by first-principles (density functional theory) calculations.

Steric and electronic effects of ligand substitution on redox-active Fe4S4-based coordination polymers

One of the notable advantages of molecular materials is the ability to precisely tune structure, properties, and function via molecular substitutions. While many studies have demonstrated this principle with classic carboxylate-based coordination polymers, there are comparatively fewer examples where systematic changes to sulfur-based coordination polymers have been investigated. Here we present such a study on 1D coordination chains of redox-active Fe₄S₄ clusters linked by methylated 1,4-benzene-dithiolates. A series of new Fe₄S₄-based coordination polymers were synthesized with either 2,5-dimethyl-1,4-benzenedithiol (DMBDT) or 2,3,5,6-tetramethyl-1,4-benzenedithiol (TMBDT). The structures of these compounds have been characterized based on synchrotron X-ray powder diffraction while their chemical and physical properties have been characterized by techniques including X-ray photoelectron spectroscopy, cyclic voltammetry and UV-visible spectroscopy. Methylation results in the general trend of increasing electron-richness in the series, but the tetramethyl version exhibits unexpected properties arising from steric constraints. All these results highlight how substitutions on organic linkers can modulate electronic factors to fine-tune the electronic structures of metal-organic materials.

Tuning the Electronic Structure of Atomically Precise Sn/Co/Se Nanoclusters via Redox Matching of Tin(IV) Surface Sites

A new strategy is reported to tailor the electronic properties of a superatomic metal chalcogenide cluster by redox matching the cluster core with surface tin(IV) sites. Two ternary clusters (SnR₂)₃Co₆Se₈L₆ (R = Me, ⁿBu) are synthesized by salt metathesis from the hexalithiated salt [Li₂(py)₂]₃Co₆Se₈L₆ and R₂SnCl₂. Cyclic and differential-pulse voltammetry studies reveal that the tristannylated clusters feature two new, near-degenerate, electronic states within the highest occupied molecular orbital-lowest unoccupied molecular orbital gap of the Co₆Se₈ core, which are attributed to the reduction of a surface tin site. Single-crystal X-ray diffraction analysis reveals that no Sn···Se coordination is present in the solid state. The single-crystal X-ray structure of the hexalithiated salt starting material is reported for the tetrahydrofuran (THF) adduct variant [Li₂(THF)₂]₆Co₆Se₈L₆.

Photoconductive Coordination Polymer with a Lead-Sulfur Two-Dimensional Coordination Sheet Structure

Coordination polymers with metal-sulfur (M-S) bonds in their nodes have interesting optical properties and can be used as photocatalysts for water splitting. A wide range of inorganic-organic hybrid materials with M-S bonds have been prepared in recent years. However, there is a dearth of structural information because of their low crystallinity, which has hampered the understanding of their underlying chemistry and physics. Thus, we conducted a structural study of a novel, highly crystalline coordination polymer with M-S bonds. Theoretical calculations were performed to elucidate its photoconductivity mechanism. The photoconductive, three-dimensional coordination polymer [Pb(tadt)]n (denoted as KGF-9; tadt = 1,3,4-thiadiazole-2,5-dithiolate) was synthesized and confirmed to have a three-dimensional structure containing a two-dimensional Pb-S framework by single-crystal X-ray diffraction. We also performed diffuse-reflectance ultraviolet-visible-near-infrared spectroscopy, time-resolved microwave conductivity, and photoelectron yield spectroscopy measurements on the bulk powder samples, as well as first-principles calculations. Additionally, direct-current photoconductivity measurements were conducted on a single-crystal sample.